pme used for sale

PME inline embossing station for integration into an existing laminating line (coarse linen): - Rubber counterpressure roller (diameter: 250mm) - A water-heated embossing roller (diameter: 254mm) - Web tension control with load cell - Pneumatic adjustment of the counterpressure roller - Pitching pressure in the pinch gap 100kN - Main drive with 5.5 KW - Maximum mech. Speed: 60m/min. - Maximum working width: 800mm - Connected load: approx. 30KW - Power consumption: approx. 20KW - Compressed air requirement: approx. 2.5 Nm³/h at 6 bar - Easy to change the embossing roller - Year of construction 2013

Capacity: 63 ton Throat depth: 280 mm Ram stroke: 8 - 100 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 246 mm Distance table to ram: 346 mm Table surface area : 900 x 550 mm Slide area: 450 x 300 mm Number of strokes: 100 s.p.m. Height of the bolster plate: 80 mm Table height over floor: 800 mm Required power: 5,5 kW Dimensions L x W x H: 1380 x1258 x 2810 mm Weight of machine approx.: 4,3 ton

Press capacity: 250 ton Ram stroke adjustable: 20 - 200 mm Slide adjustment: 140 mm Daylight: 560 mm Table surface area : 1600 x 1000 mm Slide area: 1500 x 900 mm Number of strokes: 20 - 75 s.p.m. Free frontal opening L-R: 1680 mm Distance between the columns F - B: mm Table height over floor: 805 mm Die Weight total: 2700 kg Required power: 41 kW Dimensions L x W x H: 2850 x 2880 x 4395 mm Weight of machine approx.: 25 ton

Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton

Electronic module, memory card AMT PME33 PME-33-0299 000545 SC 150999 used, tested ! Dimensions: 265 x 200 x 20 mm

Electronic module, measuring card AMT PME33 PME-33-0299 used, tested ! Dimensions: 265 x 205 x 20 mm

Description: Extruder Plastmachines extrusion machine PME 80/35 Manufacturer: Plastmachines extrusion type: PME 80/35 Year of construction: 2004 Type of offer: second-hand machine Technical data: Plastmachines extrusion machine type: PME 80/35 control:-year: 2004 injection unit screw size mm: 80 additional information 75 KW power 250-300 kg / h degassing system complete granulation plant heating tee Kuehlsiepsystem 75 KW power 250-300 kg / h degassing complete granulating heating tea cooling system siep

Flow meter, vibration measurement, display device, vibration measurement, monitor display -Manufacturer: HBM, industrial measuring amplifier -Type: PME MP60 -Price: per piece -Number: 2 piece -Dimensions: 160/60/H145 mm -Weight: 0.9 kg

Inv. Num. : 7283 Type: PME 315 T Producer: WMW Generated:- Parameters: Compressive force: 315 t Table length: 2220 mm Table width: 1225 mm Maximum stroke rate per minute: 75 1/min Plunger adjustment: 130 mm

Stock No. 2587 1 used pelletizing plant, functionally tested, Throughput up to approx. 600 kg/h depending on the material, consisting of: 1 volumetric dosage Extruder Plastmachines Type PME 100 Single screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backwasher incl. Hydraulics 3 kW Strand head with holes 20 x Ø 3.5 mm Continuous cooling pool 400 x 4000 mm with strand guide rollers Strand extraction Strand pelletizer SG 300 ResoTec control / control cabinet Viewing by arrangement - at short notice More pelletizing lines / extruders available from our Wuppertal plant & ready for demonstration

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Magnetic valve -Connection: 1/2 inch -Pilot: 3.9-10 bar -Pmed: 16 bar -Number: 1x available -Price: per piece -Weight: 1 kg

Includes (1) Single Screw Extruder PME60/35, screw diameter: 60mm, screw length: 35D with degassing vacuum pump, barrel heating zones: 7x 20kW, throughput: 60-180kg/h, power: 70kW, with integrated electrical control cabinet with temperature controllers and all connections, continuously operating screen changer type L-026 with two channels, granulating nozzle for 20 strands, stainless steel water bath with deflection rollers and cooling fan, dosing unit with hopper, (2) Double Screen 800/300 stainless steel with double screen chute, round perforation 8mm for downstream connection of a transport suction unit, monitor control, strand pelletiser GR 250, infinitely variable collection heating, single knife, inclined cut, pneumatically pressed feed roller, outlet with slide (3) Dry Air Dryer E200 with one fully insulated 1000l V2A vessel, drying throughput: 250kg/h, stationary unit, easy clean ...