pm 52 2 used for sale

1 Clamp Perfect Binder, Delivery Belt Year: ca. 1993

Refrigeration dryer

PART NUMBER: 7548 Specifications: - Track width 250mm - shaft width 250mm - max disc diameter 350mm - blade bore diameter 80mm - max cutting height 120mm - table top width with clearance 700mm - table top length 1790mm -in advance: -Triggers - pressure roller, smooth -Triggers - pressure roller, smooth - shaft with saws - smooth pressure shafts 2 pcs - from below: -Guide - slip shaft, smooth -Triggers -caterpillar - central lubrication - feed motor 1.1kW - main motor 30kW - Electric body lifting - manual lifting of the shaft with saws - extraction spigot diameter 160mm - total dimensions length/width/height 2250x1700x2000mm - weight about 3000kg ADVANTAGES – made in Germany – electric lifting of the body and shaft – smooth feed speed control – used multirip saw, very good condition Net price: 76900 PLN Net price: 17884 EUR dep ...

PART NUMBER: 7545 Specifications: - Track width 250mm - shaft width 220mm - max disc diameter 300mm - blade hole diameter 60mm - cutting height 100mm - table top width 650mm - table top length 1460mm –in advance: - 2 rows of ratchets - smooth sliding shaft - shaft with saws - smooth, sliding shaft – from below: -Guide -Triggers -caterpillar - 2 types of feed speed + smooth - central lubrication - feed motor 1.2kW - main motor 21kW - extraction spigot diameter 180mm - total dimensions length/width/height 1700x1450x1500mm - weight about 1800kg ADVANTAGES – Italian production – DTR documentation – a solid machine – used multirip saw, very good condition Net price: 25900 PLN Net price: 6023 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

FRASCOLD SA 210 BY / MCL 80 Brand:FRASCOLD, DELTA TECHNICS Type:SA 210 BY / MCL 80 Stock number:M21-6073 Cooling capacity:5.8 kW Number of fans:1 + 4 Fin spacing:6,35 mm Refrigerant:HFC Voltage:400 / 230 Volts Dimensions:706 x700 x 512 / 2250 x 700 x 250 mm Weight:65 + 59 kg Year:2004 Number in stock:1 piece(s) Price: Quotation request Description: Complete Frascold system with 1 piston compressor. Equipped with a Delta Technics evaporator (MCL 80) and an Eliwell ID 974 controller. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration

Thermo-Combinator Crystallizer Schab Heat Exchanger / Cooler with scraped surface used Manufacturer: Schröder&Co Type: UTK 18/200-DH2A Stainless steel The system was used to heat, maintain temperature and cool ketchup. Hourly output approx. 1800 - 2000 kg 1 dosing pump with two pump heads for water/spice paste and tomato paste Capacity tomato paste 0-868 l/h Total dimensions approx. 3.5 x 1 x 1.5 m. Original price was approx. 270,000 DM The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.

PART NUMBER: 7544 Specifications: - Track width 250mm - working width of the shaft 220mm - max disc diameter 300mm - blade hole diameter 60mm - max cutting height 100mm - width of the table top with extension 560mm - table top length 1580mm –in advance: - ratchets 2 rows - Slip roller, metal, pressure roller - shaft with saws - smooth, metal, slip roller – from below: - slip roller - guide strip -Triggers -caterpillar - central lubrication of the track - smooth speed control on the inverter - feed motor 1.5kW - main engine 15kW - extraction spigot diameter 170mm - total dimensions length/width/height 1950x1500x1600mm - weight about 1800kg ADVANTAGES – Italian production – central lubrication of the track – very good condition – used multi-rip saw Net price: 33900 PLN Net price: 7884 EUR depending on the price of 4.30 EUR (Pric ...

USED LÖDIGE FKM 2000D STAINLESS STEEL 2.000 LITRES BLENDER REF#: C5725 Lodige FKM2000D mixer with a total volume of 2000 liters manufactured in 316 stainless steel. Two inspection doors with a 55 kw geared motor completely reconditioned. General characteristics: Manufactured by LODIGE Model FKM 2000D Material Stainless steel 316 Year built 1973 Weight 3700 kg (2060 kg + 1640 kg motor and reducer) Technical characteristics: Capacity 2,000 L (800-1,400 L useful) Motor characteristics: Manufactured by SCHORCH Voltage 400/690 V Current 94/55 A Power 55 kW Frequency 50 Hz cos(fi) 0.89 Rotational speed 2960 rpm Reducer characteristics: Manufactured by ELENDER Model SZBW 250 Ratio 0.04 Rotational speed 120 rpm

PKZZ 250 Double Column Crank stamping Press Completely overhauled. Electric and Control- Not available. Table 2500 x 1400 mm Ram 2320 x 1250 mm Distance between uprights 2525 mm Window in table width 2300 mm Window in table depth 850 mm Stroke 400 mm Strokes per minute SPM 12 Adjustment of ram 120 mm Shutheight 550 mm Table cushion force 50 to Cushion stroke 160 mm Motor 32 kW Weight ca. 39 tons

PART NUMBER: 7521 Specifications: - inlet width 520mm - inlet height 180mm - shaft width 520mm - shaft diameter 400mm - number of knives 2pcs - sieve dimensions 100x100mm - toothed pulling shaft at the bottom - 2.2kW lower shaft motor - toothed pulling shaft from above - upper shaft motor 2.2kW - feeder length 4400mm - width of the feeding belt 500mm - feeder motor power 1.4kW - main motor 55kW - dimensions of the receiving feeder length/width 8050x880mm - belt width 600mm - dimensions of the machine with the feeding feeder length/width/height 6400x1900x1840mm - weight about 4500kg ADVANTAGES – made in Germany – with a belt feeder: infeed, outfeed – adjustable height of the take-up feeder – used chipper, very good condition Net price: 100000 PLN Net price: 23256 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

We can offer a Krauss Maffei injection moulding machine, manufactured in 2017, short time working, like new one, serious buyer contact us. We have many brands, models,years machines, tell me what you need seriously!

Both filling stations are in good condition, little in use.

Web edge control for films Type: Ultrasonic Edge Sensor FX 5060 No. 226142 24V supply voltage, current consumption 170 ma Interface CAN - Profibus DI-B000-157905M Actuator AG 5791 / AG5891 Edge Sensor FX5060

The scope of delivery includes: Steel panel, new Material colour: sendzimir galvanised Total width: approx. 295 mm Total depth: approx. 1,110 mm Inner depth: approx. 1,104 mm for column depth: approx. 1,100 mm Clear span: approx. 992 mm Truss support: approx. 55 mm Height of bending: approx. 25 mm Material thickness: approx. 2.00 mm Weight / piece: approx. 5.95 kg Other quantities on request. Quantity: - clear width trusses: 01 pcs. 02 pcs. 06 pcs - 1,800 mm 07 pcs - 2,100 mm 08 pcs - 2,400 mm 09 pcs - 2,700 mm 10 pcs. - 3,000 mm 11 pcs. - 3,300 mm 12 pcs - 3,600 mm 13 pcs - 3,900 mm 20 pcs. 50 pcs. 75 pcs. 100 pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is a ...

Recon Part Number: 1202 8212 + 1230 6887 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 1231 3228 Diesel Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways620 mmTransverse stroke260 mmLongitudinal stroke795 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmMax. torque (40% DC)525 NmTorque (100% DC)410 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,03 x 2,2 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Y-Axis PartingTechnology cycle to parting off the workpiece by the Y-axis to ac ...

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmMilling spindle upper side1 Bar diametre80 mmSpeed max.4000 rpmMax. Turning Length1530 mmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmWeight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle Hol ...

LENGTH :17200M DOUBLE GIRDER

Warranty:, 1 year for continuous use, 2 years for standby use; Gross weight [kg]: 12350; Engine: Cummins QSK50-G17; Accessories: Battery, Control Panel, Incl. coolant heater and battery charger

Type: W/ARW 2200/12 Flying Splice Comm. 2011-001.1 Working width: 2200 mm Finished roll weight max. 2000 kg Finished roll diameter max. 2x 1200 mm Finished roll width min. 800 mm; max. 2200 mm Material Paper/ Foils 75 μm – 1000 μm Machine speed max. 1500 m/min Depending on the type of material and material thickness achievable Web tension: max. 1000 N Finished roll sleeves: inside 152.4 mm outside 162.4 mm - Type of cardboard sleeve, plastic - Sleeve tolerance according to DIN 6748 or 55470 Unwinding: Type ARW 2200/12 Unwinding: axisless 2 x 1200 mm; sleeve holder 6" L.W. (other dimensions with additional accessories possible) Sleeve holder: 6" L.W. (other dimensions with additional accessories possible) Pulleys: DM approx. 150 mm Brake: Generator brake with energy recirculation, control via ultrasonic sensor Path control: Edge control E&L with ultrasonic sens ...

The detected defects from a camera system are transferred via an interface to the fault marking system, where a label is then placed as a marker on the side of the film roll. Project number 2010 / A8392 Rated voltage 230 V; 50 Hz Rated power 1 kW Dispensing speed 1-600 mm/s (depending on label size) Positioning speed 25-30 mm/s Thermal Transfer Printer

; Gross weight [kg]: 16160; Engine: Cummins QSK60-G4; Accessories: Battery, Control Panel, Including heater and battery charger

Code: 0063 Brand: MONGUZZI Model: TRA-OLM 2600 - CE Standard Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy structure essential to guarantee a precise and quality cut Pressure and lowering speed of the presser and blade holder independently adjustable via hydraulic valves Cutting length mm 2650 Presser opening mm 80 Cutting execution time 4 sec Presser width mm 340 ideal for blocking any type of veneer Cutting display light Photocells and safety barriers Installed power Kw 10 Work surface height mm 930 Automatic numerically controlled rear register with programs Sliding on quality linear guides Side button panel for processing the end cutting side Rear safety nets Overall dimensions of assembled machine mm 4100 x 2450 x 1750 h Machine dimensions for transport mm 4100 x 1800 x 1750 h Weight kg 4000

Edge strip shredder for edge trimming plastic films.

Precision ball screw drive, KGT 50mm, Gewindelg 2670mm, Rexroth, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - Precision ball screw /ball screw with nut - Thread nominal diameter 50mm, pitch 10mm, 4 turns, that means 40mm travel per turn of the nut, - Total length: 2930mm, - ball screw length: 2670mm Shaft end 1: 165mm lg - D32 x 35mm lg, thread M35 x 1,5 x 25mm lg, D35 x 85mm lg, D42 x 20mm lg Shaft end 2: 95mm lg - thread M25 x 1,5 x 28mm lg, D35 x 53mm lg, D42 x 14mm lg Function guarantee! For second hand parts, we can not provide a conventional warranty and guarantee. However, we give you a functional guarante ...

Type: S 200 l 2P Complete stainless steel Hopper capacity 200 liter Double working shafts with paddles Rotation of shafts in both directions Protection cover Two motors and two gears, transmission chain Electric power: 1.5 kW + 1.5 kW Voltage: 380 V / 50 Hz Discharging: 2 flaps Installation dimensions of machine in cm: Width: 120 Lenght: 65 Height: 100 Delivery time: after advanced payment, one working day

Graef Euro 2250 Knife diameter 220 mm Cutting height 155 mm Cutting length 220 mm Cutting thickness 3-15 mm Tabletop unit Footprint 460 x 320 mm Stock: 50 pieces

2x CHILLER with 660kW; each with 2x BITZER screw compressors; very few operating hours; in 2 containers with 2x recooler on the containers Technical data: Manufacturer: GWK Germany Type: SKW 2 -600 X 2x Bitzer Type: CSW 8593-125Y-40P Containers are heated Operating hours: approx. 5000h Year: 2010/2011, water tank approx. 8 m³ for cold water with 5 pumps 2 x GEA plate heat exchangers for freecooling 2 x 40ft Container High Cube B 3 m connected to each other 2 x GÜNTHNER Glycol Table Cooler W 2.4 m; 500 l capacity; on the container with 12 EC fans each (speed controlled) Refrigerant R134a; 34 kg per circle; Filled complete documentation very good condition more data: see pictures More pictures on request Price on request under infofrigocom.at

The CE08 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-200 50Hz 200 bar 16 l/min. CE08-200 60Hz 200 bar 16 l/min. General Specifications: ----- Power of the drive motor: 6.0 kW Volts: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

-Boiler Hebekiper Diosna HKV 224 -with Boku stage -suitable for boilers with metal pipes on the sides -Tilt height approx. 120cm -Height 245cm -Footprint approx. 170x107cm -Year of construction 2015

screw ø:: 90 mm screw length:: 20D screw speedl:: 0 - 60 U/min Condition: NEW, Specification: Rubber vacuum extruder - with warranty - Screw diameter: 90 mm - Screw length: L = 20 D (approx. 1,800 mm conveying length) - Screw speed: 0 - 60 rpm - Centre height of extruder: approx. 1,125 mm incl. base frame - Max. permissible injection pressure: 500 bar - with feed roller - Extruder water-tempered - Extruder base frame as welded construction, to accommodate the extruder with drive motor, the temperature control, the vacuum pump - Funnel piece with intermediate flange: two tempering zones approx. 4D = 480 mm - Vacuum cylinder: three tempering zones BL = 1,057 mm - End cylinder: one temperature control zone approx. 4D = 360 mm - Number of tempering zones: 5 - Heating capaci ...

Cream cooker CK 200 Rational work in cooking and heating of creams and masses Precise temperature control up to max 150°C 2 power levels Digital timer Boiler filling 200 litres Mass 22 min - 160 max. litres capacity Stainless steel Hand crank to tilt Thermal Oil Boiler Heating Machine mobile with brake DGUV V3 tested with drain tap DN80 Connection 400V, 18 kW, 32A-CEE plug Dimensions 1300 x 1200 x 2000 mm, WxDxH Weight 350 kg NEW Machine with 12 months warranty + spare parts service Option: Touch Panel LCD Stronger heating Maintenance contract Service Package Instruction & Commissioning Many more bakery machines in stock!

For sale: Diosna spiral kneader W 240 - 3 boilers - Program memory - Speed control with an inverter - with the possibility to change the speed of the spiral/tool - boiler with tilting possibility - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

Kemper vat wagon with boiler Kneading boiler vats for spiral kneader Kemper SP 250 AL Stainless steel boilers with carrying handle for a maximum of 250 kg flour for max. 400 kg dough Dimensions Boiler diameter inside 125 cm Boiler height 60 cm

For sale: Konig spiral kneader GYD 240 system as in Diosna - 3 boilers - after general overhaul - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)

--> powder scale.

260 m Meta pallet rack Used goods very good condition, see pictures. Height 4.4 m Depth 110 cm, galvanised Bay load 7000kg Strap length 2.7 m orange Carrier with load / compartment 3000 kg Offer consists of: + 94 pcs frame pre-assembled, depth 110 cm, height 4.4 m +372 pcs. Beam, length 2.7 m, 3000 kg load/compartment +744 pcs. +376 pcs Concrete Anchors Negotiation price: € 16,500,-- net from stock P10279 Used corner protectors immediately available, surcharge per piece 15,- € net! Other accessories such as clamping plates, insert grids, etc. on request. Payload signs, documents, etc. are a matter of course. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Ch ...

Pausch recording workstation Compact CS 2000 with the following device components: Generator Editor Hfe 501 Tube RAD 21 0.6/1.2 Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally railed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be completed by a specialist authorised by the manufacturer or technicians!

1 used service water pump HABERMANN HPK, power 600 cbm/h, impeller diameter 660, H 33, good condition, E -Motor SONDERMEIER GmbH Type KG315 S/7, 110 kW

GEA type 200023512 Intercooler Ladeluftkühler MTU Einwandfreier Zustand perfect condition from an MTU4000 engine that has been running for 25,000 hours von einem MTU4000-Motor, der seit 25000h in Betrieb ist

We offer Peri Pep 30-250 galvanized, used - including original Peri stacking pallet. Special offer 42 x Peri ceiling props including frame = 1.218,00€ 42 pcs PERI Ceiling Prop PEP 30-250, galvanized, used 1 pc. Peri Pallet RP 0.80 x 1.50m galvanized, used The PERI PEP slab props are particularly characterized by their high load-bearing capacity and low weight. Due to a 100% hot-dip galvanizing, the tubular steel ceiling column has a long service life. The risk of injury is significantly reduced by a built-in crush protection of 10 cm. Due to the large adjustment range of 12 cm, frequent replugging is no longer necessary. The high-quality forged nut with hardened contact surface and two-way thread make loosening under full load much easier. All supports are checked and sorted - immediately ready for use. Only while stocks last. Subject to prior sale. If you have  ...

Diesel Fuel Tank 2000 Liter, 2.000 Liter Tank, Western Global 20TCC; Gross weight [kg]: 698; Accessories: 2x in stock

clamping force: 500 kN injection volume: -- cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer you here a used box shelf for sale. The shelf is ideal for lighter boxes, but cardboard boxes can also be easily picked up. The box shelf can be individually adjusted to your own needs. Both the angle of inclination of the roll strips and the distance between planes can be quickly and easily adjusted with an Allen. The levels are provided with guide rails on both sides and a stop on one side, so that the boxes/cardboard boxes are secured against accidental falling. Technical data and further information: Manufacturer: Beewatec Designation: Cardboardrack 1 lanes 19032-01 Year of construction: approx. 2015 Notes: As can be seen in the pictures, the shelf is delivered in a pre-assembled state. Included in delivery are: 01x Box shelf, used Total length: approx. 2,500 mm Total depth: approx. 610 mm Total height: approx. 1,915 mm Internal depth: approx.  ...

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter406 mmDimensions (L x W x H)3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) mDrive power main spindle22/18,5 kWRapid feed X / Z30/30 m/minMovements X / Z260/795 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.2500 rpmBar diameter max.102 mmSpindle bore111 mmMax. Turning Length705 mmWeight approx.6400 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pLeft Spindle through-spindle hole dia. 111 mm (spindle speed 2,500 min-1, 22/ 18.5 kW)(Left Spindle) Through-Spindle Hole Dia. 111 mm (4.37-inch) (Spindle Speed 2,500 min-1, 22/18.5 kW) The NLX 2500 adopts a h ...

Key data: 198 KW, 248 kVA, 400 V

MODEL: EQ-C248198 ENGINE: Cummins 6CTAA8.9-G2 FREQUENCY (HZ): 50 VOLTAGE (V): 400 POWER: 248(kVA) / 198(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1900kg DIMENSIONS L/W/HEIGHT (MM): 330011502000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your  ...

Diosna Lifting Tipper for Kemper SP 125 A Boiler Type: HK 224 Load capacity max. 600kg for SP 125 A spiral kneader boiler Can be driven on castors with locking device robust steel construction Overhauled at the end of 2010 Entry direction of the vats from the side Large tilt angle Tipping height of the boiler 210cm Tipping height: 210cm Height: 300cm

Three-phase motor brand new, WEG-Bosch, 280S/M02, IP55, B3, 2,980 rpm, 75/85 kW, 380/660 V, also suitable for 415, 440, 460 V, 50/60 HZ