plus used for sale

Gram PLUS-M 1400 CXG C 1G Refrigerator Double Door Bj.2018 - Door with lock - Self-closing with foot pedal to open the door - With 9 stainless steel grates - With dry cooling function - With defrost function - Temperature range: -5°C/+12°C - Gross capacity: 1400 liters - made of stainless steel - Refrigerant: R 290 - Cooling capacity at -10°C: 946 watts -Electrical. Connection: 910 watts, 230 V, 50 Hz - Noise level: 47.5 dB(A) Dimensions (WxDxH): 1390mm x 876mm x 2160mm Weight: 259 kg

CNC drilling line Brand: Alberti Type: Syncro-Plus New machine Line with 5 controlled axes for vertical drilling from below. Options also allow grooving, milling and insertion of fittings. This Syncro line can be very well combined with the BMF series of Alberti. Autom. or manual loading with longitudinal workpiece transport Monolithic frame in welded strong steel Independent control of all axes with drilling cycle optimization 5 independet asex X1 Feed rate belt conveyor, 100 m/min X2 Control of reference stops, 55 m/min. X3 Workpiece transport control in relation to the workpiece width, 15 m/min. Y Drill head control, 45 m/min Z Machining depth control, 10 m/min Remark: Max. Workpiece dimensions: 3000x900x30mm Min. workpiece dimensions: 300x130x12mm Geometry of workpieces: Length > Width / Length = Width / Length < 20% Width. Machining head: 1 vertical  ...

Max. diameter of the cut material ... 200mm Main engine power... 2.2kW Machine weight ... 170kg

Robust construction made of stainless steel and high quality metal alloys. Dual chamber design for maximum efficiency. Cutting welds for accurate and reliable welds. Easy maintenance thanks to removable sealing jaws and service program. Versatile application possibilities for different packaging requirements.

NC Lathe Gildemeister Nef 500 BJ 1996

Offered as a package deal: GS-24 PLUS 200 and GS-24 PLUS SPM machines included. Machine 1 (Has two individual sealing units arranged one behind the other) Model: GPPL-GS-24-Plus-200 Year of Manufacture: 2020 The machine set is capable of producing various pouch types, including: - Three Side Seal Pouches (with/without zipper) - Stand-up Pouches (with/without zipper) - Both Side Gusset Pouches - Shape Pouches (via attachment) - Bottom Film Synchronization & Laminate Roll Conversions Applicable Films - Heat-sealable laminated films: - PET poly, PET MET poly, PET ALU foil poly, paper poly, multi-layer films (e.g., PA/PE) Production Range - Output: Up to 200 shots/min or 35 meters/min - Actual output depends on pouch size, repeat length, and laminate type Product Size Range - Three Side Seal Pouch: - 100–600 mm (W) x 100–400 mm (L), 1–2 line operations - Stand-up Pouch: - Si ...

Universal precision milling machine ALCOR 220 Plus - Capacity 1000x450x545 mm, Digital read-out system, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1400x450 mm, Longitudinal travel x axis: 1000 mm, Cross travel y axis: 450 mm, Vertical travel z axis: 545 mm, Spindle taper: 40 ISO, Spindle speed: 38 - 2010 rpm, Number of spindle speeds: 18, Spindle motor power: 4 Kw, Quill spindle travel: 60 mm, Working feed x-y axes: 3 - 3000 mm/1, Working feed z axis: 1 - 1000 mm/1, Rapid feed x-y axes: 3000 mm/1, Rapid travel z axis: 1000 mm/1, Number of working feeds: stepless by DC motor, Weight: 3.500 Kg, Accessories: DRO, coolant, power draw-bar

CNC Machining Center Manufacturer: Unverzagt Type: UVA 550 Plus Year of Make: 2012 Control: Siemens 828D Operating hours: approx. 3,000 Travels: X/Y/Z: 600 x 400 x 500 mm Tool locations: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Wireless Push Button Hexagon Conveyor Spindle coolers IKZ (internal cooling system)

Height=0.55 m, Overall length= 0.3 m, Overall width= 0.58 m, Net weight= 39 kg,

Key data: 140 °C, 10 kW

Temperature control unit for tools - Wittmann Tempro Plus (15 pcs.) Year of manufacture: 2009-2018 Location: Lodz, Poland Description: Max. heating capacity - 140°C Heat transfer medium – water Power: 10 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Cutting length: 5.300 mm Cutting height: 2.200 mm Dimensions (L/W/H): 6.470 x 1.281 x 2.885 mm output: 4 kw turning speeds: 4.750 U/min saw-blade dia.: 300 mm Cutting depth: 80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 400 mm ram stroke speed: 200 mm/sec work speed: 10.0 mm/min return speed: 165 mm/sec work stroke: ca. 350 mm dayligth: ca. 660 mm oil volume: 450 ltr. table height: 830 / 950 mm table width: 75.0 / 60.0 mm voltage: 400 Volt total power requirement: 18.5 kW weight: 13440 kg range L-W-H: 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request ------------------------------------------------------ ULTIMA PLUS electro-hydraulic press brake with: increased installation height .. approx. 660 mm increased cylinder stroke .. approx. 350 mm ----------------------------------------------------- - in checked condition - machine video - https://www.youtube.com/watch?v=chgCaXLnpa8 Equipment: - CNC electro-hydraulic die/press brake - CYBELEC CNC control DNC 880 S swiveling control p ...

Manufacturer: Wagner / J. Wagner GmbH Type: SuperFinish SF 23 Plus Voltage: 230 V AC Frequency: 50 Hz Motor power: 1.3 kW Maximum flow rate: 2.6 l/min Maximum operating pressure: 180 bar Maximum nozzle size: 0.023" Weight: 29 kg Technology: Diaphragm pump (airless) Suction: Top tank or rigid suction system Workable materials: varnishes, primers, glazes, impregnations, oils Special: Brushless motor, low-maintenance, robust design for professional applications

Gastronorm, HACCP, 600/400, large quantities

Thermo pens, new and used insulated boxes, cooling and freezer boxes, warming boxes, HACCP, with AKKus, 600/400

CONTROLS   PLC BECKHOFF SLIDE   total force (nominal): 880 to   stroke: 305 mm   cutting velocity min.: 5 mm/s   cutting velocity max.: 70 mm/s   closing velocity: 200 mm/s   returning velocity: 200 mm/s V-RING   nominal force: 400 to   stroke: 40 mm COUNTER RAM   nominal force: 200 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 1010 mm   lower table (front-back): 1600 mm   upper table (left-right): 1000 mm   upper table (front-back): 1000 mm   shut height max.: 460 mm LEVELLER UNIT   sheet width max.: 400 mm   sheet width (min): 100 mm   sheet thickness max.: 12 mm   sheet thickness min.: 1.6 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 450 mm   sheet thickness max.: 16 mm   feeding step min.: 1 mm   feeding step max.: 999.9 mm   sheet length min: 3950 mm   speed max.: 48 m/min   Vertical adjustme ...

Laminator Protopic Plus 520 Year of manufacture 2007

MITSUBISHI ML3015eX PLUS laser cutting machine was built in 2019 in Japan by MITSUBISHI ELECTRIC CORPORATION. The machine, distinguished by the use of the most advanced technology available on the market, is an excellent choice for precision cutting of sheet metal made of, among others, steel, aluminium and copper. Workpieces with a maximum length of 3050 mm and a width of 1565 mm are machined by means of a reliable head with auto focus, which is powered by a 4.5 kW laser beam. The laser beam is generated by electrical discharges in a special gas mixture with a relatively slow flow and in a direction perpendicular to its axis. Real-time power monitoring, combined with a constant beam length, ensures the highest cutting quality over the entire work area and prevents power deviations of more than ± 1%, which are necessary for machining highly reflective materials. The entire machining  ...

1 color offset Heidelberg GTO 52, 52 x 36 cm format, VARN compac dampening system, as new condition, only ca. 8 mio impressions, plus version, elec. double sheet control in feeder.

Screw Diameter: 160 mm // Output Capacity: 1400 kg/h

Material : PP, PS, APET, CPET, PLA, OPS, EPS, PVC // Forming Area (Vxh): 780x570

General SKU437W1435 LocationBarneveld CEcheck MakeMLS GmbH TypeEthos plus 2 Main Features Motor2.5 KW Specified Features - Miscellaneous Motor2,5 kW, 230 volt With jacketcheck General No.124826 Year of constructionunknown Floor space1,0x0,70 m Total height0,75 m Weight80 kg Extra SpecificationsLab microwave solvent Extraction labstation, with multi Prep-p 36 rotor, color control, type Terminal 800, Cryolab cooling moduleMiscellaneousMLSMiscellaneous > MiscellaneousBrand > MLS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

We offer a refurbished rotary lobe blower Brand: Kaeser Type: Omega 63 Plus All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

Introducing the versatile CNC Milling Machine with HEIDENHAIN iTNC530 control, designed for precision machining tasks across various industries. With impressive X, Y, and Z-axis travels of 3,000 mm, 1,700 mm, and 1,500 mm, respectively, this machine offers considerable flexibility for complex operations. The robust spindle delivers power between 28 kW and 38 kW, achieving speeds from 30 to 5,000 rpm, while the spacious worktable measures 3,200 x 1,200 mm and supports up to 8,000 kg. An electronic handwheel and chip conveyor enhance functionality, and the unit is 4th axis ready. Its ISO-50 DIN 69871A tool holder and cooling through the spindle further optimize performance. Available in [Location/Availability], this machine meets diverse manufacturing needs with reliable efficiency.

Specifications: • 75 x 53 cm 6 mm Accessories: • PC workstation • DZDV PC TOUCHSCREEN PC 32" 9970460-20 incl. console • SLEEKING System HAK 100/Brother hot foil printer/finishing system Year of construction: 2024 Price: We ask for your binding offer Available from: immediately Terms of delivery: ex site – EXW Wiehl Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.

Tenoning spindle: 1 St. Number of milling agregates: 0 St. Spindle diameter: 40 mm Small window production consisting of: W. -------------------------------------------------- 1) Haberkorn FZS1 slotting machine 2) Okoma SF3F table milling machine 3) Oertli tool for the Haberkorn and Okoma machines Wooden windows 1 set IV 68/78/88 and 1 set wooden aluminium windows IV 68/78 built in 2011 4) Götzinger OBM Plus corner bearing and olive drilling machine, Maco MultiMatic fittings -------------------------------------------------- Technical manufacturers description: - Haberkorn FZS1 slotting machine with automatic feed, -stepless height adjustment D 40 mm Cutting-to-length saw: -Spindle arrangement: top -Three-phase motor: 3 kW -Spindle diameter: 30 mm -Speed: 2800 rpm -Saw blade diameter: 400 mm -Automatic brake with speed monitoring -Horizontal pneumatic positioning, manually adjustable  ...

Year of construction 2012 Siemens Control 840D Remote diagnostics and teleservice On-screen maintenance instructions 5-axis milling package Rigid table with integrated rotary table Kessler DTE 520 max. speed 1000 rpm Travel X/Y/Z 2000/685/630 mm NC swivel head with headstock NC swivel axis +- 100° - direct measuring system Speed range 20,000 rpm Direct displacement measurement systems Tool changer with 92 places Rapid traverse 40 - 40 - 40 m/min Axle acceleration 0.25 g Chip conveyor (hinge belt) Coolant system HL 450 / 900 (IKZ) Chip gun Coolant recooling unit Additional tub flushing Machine preparation for air through the spindle Extraction for the working area Safety package MILL 2000 reinforced cab with safety washers Zero-point clamping system NSL tur 570-5-Z for DTE 520 Mitfahrende Chiron Lasercontrol Single F295 Tool breakage detection Probes Renishaw OMP ...

Dough machine Diosna Model: D 240 Plus for max. 240 kg dough Stainless steel boiler 2 gears, 1 timer Lifting kneader with flour dust hood Machine mobile with brake Connection 400V, 16A-CEE plug Dimensions: 1125 x 1140 x 1310/2050mm, WxDxH Machine We have more lifting kneaders in stock!

Full overhauled valve TEC JET 50 PLUS with no use after maintenance. Ready to send.

A small compressor system including separator and dryer is available. 1) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 2) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 3) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible.

turning diameter: 1220 mm turning length: 5000 mm control: FAGOR 8055 TC swing diameter over bed slide: 880 mm spindle bore: 160 mm spindle turning speed range: 0 - 1000 U/min transmission ratio: 4 tailstock quill diameter: 180 mm tailstock quill stroke: 260 mm main drive motor: 40 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m In 2020 overhauled: - Grinding of carriage guides on the X and Z axes - Preloading of X and Z axis ball screw nuts - New Turcite placed on the X and Z axis carriages - General review and disassembly of the engine and head regulator - General review and disassembly of the motors and regulators of the X and Z axes - Disassembly and inspection of the SAUTER tool holder - Checking and cleaning the electrical cabinet - Complete review of the hydraulic circuit CNC-control FAGOR 8055 TC Tool turret SAUTER 4-jaw chuck Ø  ...

The ProJet 2500 Plus (part of 3D Systems’ MJP 2500 series) is a professional MultiJet Printing (MJP) 3D printer designed for high-quality prototyping 1171 Hours Specifications Build Volume 294 × 211 × 144 mm Build Chamber – Support Material Wax Z-Axis Resolution 32 µm Operating Principle MJP (MultiJet Printing) Operating Software 3D Sprint Machine Specifications Weight – Dimensions 1120 × 740 × 1070 mm Find more here - / Contact us at -

Colour Monitor, Touch Screen, Programs, Chromed Air Table, Light Barriers, Resopal Side Tables With Air, Spare Knive, Books & Manuals

A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible.

General Manufacturer: Chiron Type: DZ 12 W Magnum high speed plus Control: Siemens 840D Year of Make: 2016 Travels: X 550 mm Y 400 mm Z 400 mm Rapid traverse X/Y/Z: 75 m/min Operating hours: 14,709 h Working spindle Speed: 20,000 rpm Torque: 29 Nm Power: 24 – 36 kW Tool holder: HSK 63A Double spindle spindle spacing: 250 mm Tool changing table Dimensions L/W: 660 x 950 mm Tool/movement Tool changer: 32-fold Dimensions and weight Weight: approx. 9,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Spindle coolers IKZ high-pressure system with belt filter Knoll KF150/500 Chip conveyor Probes Renishaw Oil mist extraction Blum Laser Measurement

: mit Zubehör serial number: 71309 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Largest grinding length 1200 mm Longest grinding length with table dresser 1000 mm Largest grinding width 600 mm Grinding height (table bottom edge grinding wheel) 550 mm Table load with magnetic pallet 975 kg Table load without magnetic plate 1200 kg Table speed 1 - 40 m/min Grinding spindle Motor spindle 11 KW Grinding wheel 406 x 152.4 x 100 mm Speed 1400 rpm Longitudinal axis (z-axis) Rapid traverse 5 m/min Adjustable feed rate 1 - 50 mm Infinitely adjustable feed 0 - 2000 mm/min smallest infeed 0.001 mm Perpendicular axis (y-axis) Rapid traverse 1.5 m/min smallest infeed 0.001 mm Space requirement approx. 4450 x 2935 x 2540 mm Total weight approx. 6700 kg Equipment: - Electropermanent magnetic clamping plate 1000 x 500 mm incl. electron. Control module and potentiometer - Coolant cleaning system with paper filter and magnetic separator 350 l - fl ...

This 7-axis EMCO HYPERTURN 665 MC PLUS lathe was manufactured in 2005. It features twin spindles, twin turrets, and a maximum turning diameter of 600 mm. Equipped with a SIEMENS 840D CNC, it offers spindle speeds up to 5000 rpm and a bar passage diameter of 65 mm. Additional features include a LNS MOVE bar loading magazine, high-pressure coolant system, and air-conditioned control cabinet. For more information about this lathe, please reach out to us.

This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine.

This Dugard 1000Y Plus was manufactured in 2011. It features a table size of 1200 × 600 mm, a maximum table load of 600 kg, and a tool magazine capacity of 24 tools. The machine includes a fourth rotary axis and is equipped with a FANUC 0i-MD control. If you are looking to get high quality milling capabilities consider the Dugard 1000Y Plus machine we have for sale. A large set of accessories and equipment is included. Contact us for more information.

Año de Fabricación 1999 CNC HEIDENHAIN TNC-430 Superficie de la mesa 2500 X 700 mm. Recorrido Longitudinal (Eje X) 2500 mm. Recorrido Transversal (Eje Y) 800 mm. Recorrido Vertical (Eje Z) 800 mm. Avances (X/Y/Z) 5.000 mm/min Avance Rápido Ejes 12.000 mm/min Cono Cabezal ISO 50 Gama de Revoluciones 4000 rpm Potencia de cabezal 22 Kw Peso Admisible sobre mesa 4.000 kg. Peso de la Máquina 10.000 kg. Cabezal Automático 2,5° / 2,5° Amarre Hidráulico de Herramientas INCLUIDO Dimensiones Maquina 6450X2700X2830 mm

This LVD Sirius 3015 PLUS was manufactured in 2015. A robust CO2 laser cutting machine, it includes an automatic nozzle changer and has logged 22,192 operating hours. The package comes complete with a laser source, cooler, extraction unit, and various wear parts including nozzles, lenses, and additional lens holders. If you are looking to get high-quality cutting capabilities consider the LVD Sirius 3015 PLUS machine we have for sale. Contact us for more information about this machine.

This HGTECH TP 6535 PLUS was manufactured in 2024. It is a fiber CNC cutting laser designed for cutting pipes, tubes, and both closed and open profiles. It operates with power ranging from 1 to 6 kW and can handle pipes up to 8.5 meters long and 280 mm in diameter. Contact us for more information about this machine.

General SKU325W681 LocationBarneveld CEcheck MakeStable Micro Systems TypeTA. XT. Plus Mach.No.11506 Year of constructionunknown Floor space0,28 x 0,45 m Total height0,66 m Extra SpecificationsTexture analyser.MiscellaneousStable Micro SystemsMiscellaneous > MiscellaneousBrand > Stable Micro Systems What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU379X1442 LocationBarneveld CEcheck MakeMonTech TypeDisperTester 3000+ Main Features MaterialMild steel Specified Features - Viscosity test machine Viscosity meter(dispertester) Electric capacity230 V MaterialMild steel With jacketcheck General No.318 KA 666 Year of construction2019 With switchcheck Floorspace0,22x0,40 m Total height0,18 m Weight25 kg Extra SpecificationsStandards Compliant with ISO 11345:2006 and ASTM D 7723 (dispersion analysis) Optics Magnification: 100× Field of view: 12 mm × 3.5 mm Agglomerate measurement range: 1 µm – 250 µm Image resolution: 10 MP with telecentric optics Focus: automatic or manual Illumination: controllable multi-directional LED Mechanical Precision scanning with linear two-stage system enabling multiple readings per sampleViscosity test machinesMonTechPlastic machinery > Viscosity test machinesBrand > MonTech  ...

This optical measurement machine was manufactured in 2018. The MAHR MahrShaft SCOPE 250 plus features a high-resolution CMOS matrix camera, integrated 21 touchscreen monitor, and a CNC MarEcon control system. It supports a measuring length of 250 mm and can handle workpieces up to 100 mm in diameter and 5 kg in weight. If you are looking to get high-quality measurement capabilities, consider the MAHR MahrShaft SCOPE 250 plus machine we have for sale. Contact us for more information.

This STEINER Projet MJP 2500 Plus was manufactured in 2018. Its a plastic 3D printer designed for detailed and precise object creation. Ideal for prototypes and small-scale production, this machine represents a significant opportunity for those looking to enhance their 3D printing capabilities. Contact us for more information.

General SKU390X1006 LocationBarneveld CEcheck MakeBrabender Main Features MaterialStainless steel Motor0.37 KW Inlet diameter150 mm Specified Features - Metering screw MaterialStainless steel Metering screws Metering screwcheck Screw diameter50 mm Screw length450 mm With hoppercheck Capacity± 44,55 Ltr. Hopper sizestrapezium: a: 400 mm, b: 260 mm, h: 300 mm: H: 450 mm Inletø 150 mm Outletø 50 mm With motor0,37 kW, 380 volt, 1380 rpm Screw speed96 rpm Information TypeFW40/0 plus-50 & DDW-MD2-DDSR20-5 No.0903048.2104 0903048.2105 Year of construction2010 With switchgearcheck as is With switchgearcheck as is (E-scheme available) Extra SpecificationsWith: Sitecon, vibro hopper filter Busch, blower, 3 kW, 500 volt, 2x Brabender, dosing screw, type DDW-MD2-DDSR20-5: :motor: :0,18kW: feed rate 0,25 — 1 kg/h:Metering screwsBrabenderDosing units > Metering s ...

This Hebrock TOP 2000 PLUS was manufactured in 2015. A used edge banding machine, it features a gluing unit, cutting unit, and combination milling unit. It handles edge material thickness from 0.5 to 3 mm and can manage workpieces from 10 mm to 45 mm in thickness. Ideal for precise edge finishing tasks. Contact us for more information about this machine.