We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,582 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
max. plate width: 80 cm stamp width: 425 mm serial no.: 1132 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 80 cm stamp width: 425 mm serial no.: 5136 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 52 cm stamp width: 220 mm serial no.: 16548 plate punch for GTO or QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 50 cm stamp width: 220 mm serial no.: 4184/20 Dimensions (L/W/H): 60x20x50 mm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 920 cm stamp width: 425 cm Dimensions (L/W/H): 550/1000/1220 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 74 cm stamp width: 340 mm serial no.: 13434 dimensions of press (L x W x H): 80 x 95 x 120 cm weight: 100 kg Thermo plate bender for The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 52 cm stamp width: 220 mm serial no.: 3851/15 Dimensions (L/W/H): 60x20x50 mm plate punch QM 46 or GTO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 1520 cm stamp width: 780 mm dimensions of press (L x W x H): 150 x 58 x 128 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
stamp width: 425 mm serial no.: 6660/39 Dimensions (L,W): 71 x 55 cm plate punch for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Flat heating plate with insulating plate, panel radiator, heating plate MEDISEAL GmbH Flat heating plate: MI 563900 C 342990 power: 4,5 kW ( 4500 W ) Operating voltage: 230 V AC 50 / 60 Hz Dimensions: 570 x 330 x 1.2 mm insulating plate: 61021810801 Dimensions: 570 x 330 x 5.0 mm New ! Dimensions ( Packaging ): 600 x 400 x 50 mm
used
Schneider paper shear
used
Capacity 3100 x 6mm Elevated table at the rear Walk-in protection Return to sender Scrap bin option at the front Machine has just arrived, more photos and information on request
used
10′ x 3/4″ Cincinnati Mechanical Shear Material Width: 10′ Thickness: 3/4″ Serial # 6210 Model # 14611 Hardness: 300 Brinell 11 Hold-Downs Adjustable Entry Edge Guides
used
10′ x 3/8″ Cincinnati Mechanical Shear Material Length: 10′ Material Thickness: 3/8″ Front Guage Gap: 4″ Speed: 60 spm Auto Lube Number of Hold-Downs: 11 Electric Foot Pedal Digital Control Motor: 8HP AC
used
60″ x 10g Secrest Mechanical Shear Make: Secrest Machinery Material Width: 12″-60″ Maximum Thickness: .125″ Air Clutch & Brake Motor: 10HP AC
used
12′ x 1/4″ Cincinnati Mechanical Shear Material Length: 12′ Material Thickness: 1/4″ Model: 1812 Serial # 30782 Gap: 4″ Speed: 60 spm Auto Lube Number of Hold-Downs: 12 Electric Foot Pedal Digital Control Motor: 15HP AC
used
12′ x 3/8″ Pacific Hydraulic Shear Make: Pacific Serial # 1090 Model: 375R12 Maximum Width: 12′ Material Thickness: 14g – 3/8″ Knife Length: 144” Distance Between Housing: 12.5’ Electric Back Gage
used
12″ x .250″ Cincinnati Mechanical Shear Material Length:12′ Material Thickness: 1/4″ Model: 1812 / Serial # 33664 Gap: 4″ Speed: 60 spm Auto Lube Number of Hold-Downs: 12 Electric Foot Pedal Digital Control Motor: 12HPAC
used
Shearing Machine ROMEC C20-4 Cutting Length 2050 mm Thichness 4 mm . used machine in good working condition
used
Shears cnc 3000 x 6, year 3003 Folder: 4000 x 80 Ton Variable angle notching machine with punching head. Machines in excellent condition that worked for a private company or not for third parties.
used
Bench top high shear granulator/mixer for R&D laboratory usage and small batches; designed for processing of small batches and has the flexibility for scale up. Equipped with 3-blade design with speeds from 50-750rpm; colour touch screen operator interface, the KG-5 is easy to use and generates meaningful product performance data; propeller has a 3-blade design with speeds from 50-750rpm; variable speed chopper (1,000-10,000rpm) and a liquid addition system; standard printer output for recording recipes and parameters from automatic operations; quick release components to facilitate easy cleaning; this extra information is standard for this model. Please always double-check the details during a visit The KEY KG5 High Lab Small Batch Shear Granulator/Mixer is a cutting-edge pharmaceutical machine designed for precision mixing and granulation of powders in small-scale production envi ...
new
: neu : ca. 10 Wochen ab Auftrags : Spanien : 26700 € : 6000 mm : 40 mm : 6000 mm : 600 kg : 180 mm : 0,2 mm : 0,1 mm The ALRS 600 is a CNC controlled flat bar feeding and shearing system to be mounted on GEKA Hydracrop 80 and Hydracrop 110 dual cylinder ironworkers. This system is ideally designed for shearing desired lengths and quantities of flat bars up to 600x15 mm and 6 m length. THE ASSEMBLY CONSISTS OF: Drive roller with hydraulically controlled pinch roller. Servo motor with linear encoder. B&,R Power Control 500 10”user friendly touch screen control mounted in a control cabinet. Positive hydraulic clamping. Fix guide rollers. Manually adjustable straight guide rollers. 6m roller bed conveyor. Electric cabinet THE WORK PROCESS IS AS FOLLOWS: Place the flat bar on the rollers Adjust the lateral rollers to the width of the flat bar Clamp the material with the h ...
used
sheet width: 3100 mm plate thickness: 12 mm distance between columns: 3260 mm back stop - adjustable: 3 - 1250 mm power capacity: 37 kW voltage: 400 V weight of the machine ca.: ca. 14 t dimensions of the machine ca.: 4,00 x 4,00 x 2,20 m CNC-controlled plate shear www.kefischer.de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
OSTAS PLATE SHEAR TYPE RGM 1050 x 3 -Capaciteit 1050 x 3 mm -Achteraanslag -Voetbediening -Remmotor -Plaathouders -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
OSTAS PLATE SHEAR TYPE RGM 1050 x 6 -Capaciteit 1050 x 6 mm -Achteraanslag electric -Voetbediening -Remmotor -Plaathouders -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
SAY MAK PLATE SHEAR TYPE SRGM H 1400 x 3 -Capaciteit 1400 x 3 mm -CN touchscreen achteraanslag besturing met various functies -Geknipte plaat gets voor-of achter de machine uit (dat kiest u op touchscreen) -Pneumatic plaathouder eighth -Plaathouders voor -Voetbediening -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
new
OSTAS PLATE SHEAR TYPE ORGM 2050 x 3 -Capaciteit 2050 x 3 mm -Achteraanslag -Voetbediening -Fotocelbeveiliging van de achterzijde -Oplegarmen -Verlichting van snijlijn -Remmotor -Noodstop -Documentatie -Weight 1900 kg -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
new
OSTAS PLATE SHEAR TYPE ORGM 2050 x 3 -Capaciteit 2050 x 3 mm -Achteraanslag electrical -Voetbediening -Fotocelbeveiliging van de achterzijde -Oplegarmen -Verlichting van snijlijn -Remmotor -Noodstop -Documentatie -Weight 2000 kg -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
new
OSTAS PLATE SHEAR TYPE ORGM 3050 x 4 -Capaciteit 3050 x 4 mm -Achteraanslag electrical -Voetbediening -Fotocelbeveiliging van de achterzijde -Oplegarmen -Verlichting van snijlijn -Remmotor -Noodstop -Documentatie -Weight 4100 kg -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
Hydraulic panel shears - storage machine - incl. foot switch, touch screen, rear installation room with light barrier monitoring, automatic/electric cutting gap, automatic/electric cutting angle, hydraulic hold-down, mot. Backgauge up to 1000 mm depth -Illustrations similar- Hydraulic plate shear - storage machine - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-
used
Panel shears type Н3218Б or H3218B Working width approx. 2000 mm sheet thickness at 400 N/mm² approx. 6.3 mm functioning - Illustrations similar - Plate shear Type Н3218Б or H3218B Working width approx. 2000 mm sheet thickness at 400 N/mm² approx. 6.3 mm Functional - images similar -
used
Sheet thickness: 2,00 mm Sheet diameter: 2 mm Knife diameter: 0 mm BMS - KSA 1500 x 2.0 Decoiler for coils up to 1500 mm Straightner with 9 rolls adjustaable to 0.2 - 2 mm Slitting roll with 3 knive blades Cutting plate shear up to 2 mm Positioning & Feed & Speed controller Maximum sheet thickness:2mm Length: 4500mm Width: 2000mm Height: 1600mm Weight: 4000kg
new
Hydraulic guillotine shears - ordering machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear installation room with light barrier monitoring, cutting gap automatic/electric, cutting angle automatic/electric, hydraulic hold-down, mot. Backgauge up to 1000 mm depth -Illustrations similar- Hydraulic plate shear - order machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-
new
Hydraulic guillotine shears - ordering machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear installation room with light barrier monitoring, cutting gap automatic/electric, cutting angle automatic/electric, hydraulic hold-down, mot. Backgauge up to 1000 mm depth -Illustrations similar- Hydraulic plate shear - order machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-
used
intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox
used
14 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -15 Stand / 56 bars -Traverse length 2.70 m - load per level 2.4 tons -Shelf height: 6.00 m depth 1, 05 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory amounted to approximately 450 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Comme ...
used
used
Qty. 1 Second-hand gas heated log furnace including hot shear Mfc.: ELHAUS Type: L250-90/135/4FK – WS250BD Built: 1999 Log dia.: 10” – 254 mm Log length: 5 – 7 m Billet length: 650 – 1300 mm Min. shear temperature: depending on the alloy approx. 340 – 400 °C Log temperature max.: 530 °C Heated by natural gas Hu=8.600 kcal/Nm³ Gas consumption: 234 kWh/tAl – 23.5 Nm³/t Al El. power: 130 kW Number of heating zones: 4 Number of circulating zones: 3 Dimensions of the furnace: 14.75 x 2.2 x 3.9 m - L x W x H Hot shear Recoil pressure: 0 – 100 bar Recoil stroke: 1.85 m Shear force: max. 1.69 MN at 210 bar Shear stroke: 360 mm Output pressure: max. 160 bar Output stroke: 325 mm Closing pressure: 210 bar Spreading stroke: 2 x 4.0 mm Dim.: Height above hallway: 2.9 m Length over everything: 3.95 m Width over everything: 2.65 m Hydraulic station Max. ...
used
Stock# UG6234 Very little used high shear mixer/granulator made by Lodige (Germany) model MGTL 10. Machine is designed in stainless steel. Interchangeable cylindrical vessel with a total capacity of 10 liters and a working volume ranging from 25% to 70% of the volume of mixing chamber. Mixer equipped with a three-arm mixing impeller bottom driven by el. motor with the power 2.7 kW, 3000 rpm, and side entry chopper driven by el. motor 0.42 kW, 3000 rpm. The speed of the agitators is fully adjustable. Includes additional tulip type agitator, a spray nozzle and Watson Marlow peristaltic pump with adjustable speed in the range from 3 to 400 rpm and the capacity of about 5.7 to 760 ml / min. Mixer passed the FAT (Factory Acceptance Test) and the qualification according to the GMP (Good Manufacturing Practice) guidelines. Unit includes full technical documentation and spare parts. New in 20 ...
new
McIntyre 200B Shear Available with or without a stand, this machine might look small but it has a big cutting capacity Small but powerful McIntyre's wide experience in hydraulic equipment manufacture has enabled us to build an 8†shear with a staggering cutting force. Although equipped with only a blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations - in particular larger diameter electric cables and valves. In most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it. Our company can provide this equipment with short delivery time.
used
Working width: 1040 mm sheet thickness: 12 mm rear gauge: hand up to 500 mm power: 380 V, 11 kW space: 2500 x 2150 x 1900 mm weight: 4100 kg
used
Working width: 2500 mm sheet thickness: 4 mm throat depth: 70 mm rear gauge: 520 mm power: 380 V, 6.3 kW space: 3200 x 2300 x 1270 mm weight: 4600 kg
new
McIntyre 407 CAT Shear Designed to recover the precious metals found in Catalytic converters, JMC Cat shears also versatile enough to be used anywhere in your yard. Purpose Built McIntyre Cat shears have been purpose built for recovering precious metals from catalytic converters. The Catalytic converter is simply placed in the jaws and cut. The movement of the jaw is directly controlled by the moveable foot pedal and a V clamp holds the Cat in place during cutting. Once cut, the pinched end of the converter can be re-opened using the side bracket attached to the top jaw, allowing the contents to be poured out.
new
McIntyre 407 Shear An affordable efficient 407mm (16") blade shear with enough power and speed to handle a wide variety of cutting tasks Robust, affordable, efficient Built originally for scrapyard use, the McIntyre 407 shear is robust enough to withstand the most difficult of working environments. It is now our most popular alligator shear with more than 2000 still in daily use worldwide. The McIntyre 407 is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations. The 407 can also be used to cut ferrous metals. Why
new
McIntyre 500 CAT Shear The 500 CAT is designed for those needing just a bit more blade length without an equivalent increase in price. Versatile The 500 CAT gives customers just a bit more blade length without a big price increase. It is powerful enough to handle most non ferrous cleaning and sizing operations, and can also be fitted with an optional bracket enabling it to assist when processing catalytic converters. Long-lasting In common with all JMC shears, the 500 CAT has been designed and built to last. Blades are deep hardened for extended life, hardened chrome rod is used in the hydraulic ram, and components are all choiceed according to their quality over and above their price.
new
McIntyre 500HD Shear This new generation shear is faster and more powerful than any other machine of its size. Featuring an automatic hold down clamp and 20 inch blade, this model is available as electric or diesel Fast and strong This 508mm, 20 inch, blade shear has been built for speed and power, and will outperform every other machine in its field. The McIntyre 500HD has enough shear force to deal with a wide range of operations and materials including: the cleaning of automotive aluminium scrap, whole gearboxes, cylinder heads and blocks, oversized gate valves, and the handling of all non-ferrous separations. It can also be used for cropping ferrous metals.
new
McIntyre 500HD Shear This new generation shear is faster and more powerful than any other machine of its size. Featuring an automatic hold down clamp and 20 inch blade, this model is available as electric or diesel Fast and strong This 508mm, 20 inch, blade shear has been built for speed and power, and will outperform every other machine in its field. The McIntyre 500HD has enough shear force to deal with a wide range of operations and materials including: the cleaning of automotive aluminium scrap, whole gearboxes, cylinder heads and blocks, oversized gate valves, and the handling of all non-ferrous separations. It can also be used for cropping ferrous metals.
new
McIntyre 600 CAT Shear Cat shears are powerful enough to deal with a wide range of operations including the cleaning of automotive aluminium scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and the handling of all non ferrous separations. VERSATILE The 600 CAT features a blade guard system which gives good visibility to the operator and acts as a hold down to prevent material kick back. The machine is foot pedal operated and the jaws return to the open position once the foot pedal is released to increase safety. Wheels are fitted as standard, and forklift points have been included on the body of the machine to ensure that it can be safely lifted both within the yard and during transportation.
used
Working width: 4100 mm sheet thickness: 16 mm projection: 300 mm rear gauge: 1500 mm power: 400 V, 45 kW space: 4800 x 3500 x 2600 mm weight: 28000 kg