plate processor ctp used for sale

• Type: 700 x 70 - 700 x 600 • Quantity: four pieces

OSB boards with tongue and groove connection, with a size of 205 x 67.5 x 1.2 cm each. Auction-ID: A1-45106-2280

Addax MT electric tipper, li-ion battery, including battery charger, with COC papers for car driver's license, hydraulic tipping tray, webasto diesel stand heater, new price: €37000.00, Technical specifications Motor: Three-phase asynchronous motor with a power of 8 kW and a torque of 100 Nm.Battery: Lithium iron phosphate (LiFePO4) battery with a capacity of 10.2 kWh.Charging: Standard 230V (16A) connection. Maximum speed: 70 km/h (or limited depending on homologation). Homologation: L7e or N1. Number of seats: 2 passengers. Capacities & DimensionsLoad capacity: 1,000 kg Towing capacity: 2,000 kg Auction-ID: A1-40314-4

Unprimed MDF board with the dimension 2620 x 994 mm, with a thickness of 16 mm. Auction-ID: A1-45106-2240

Unprimed MDF board with the dimension 2620 x 994 mm, with a thickness of 16 mm. Auction-ID: A1-45106-2239

Equipped with: Gray license plate (commercial), rear seats present for reconstruction yellow license plate (persons), 22 inch lmw black, 3.0 V6 Supercharged, soft close doors, Meridian music pack, steering wheel heating, panoramic sliding tilt roof. Electronic air suspension with Terrain Response, Vogue SE version, fridge, Auction-ID: A1-47417-1

BOMAG BPR 35/60 D Vibratory Plate (Used machine) • Manufacturer: BOMAG • Type: BPR 35/60 D • Machine type: Reversible vibratory plate • Year of construction: 2021 • Serial No.: 101695471449 • Engine: Hatz Diesel • Motor power: 3.1 kW • Operating weight: 225 kg • Made in Germany Equipment: • Reversible forward and reverse flow • Hatz diesel engine • Hand start / pull starter • Vibration plate • Height-adjustable guide drawbar • Vibration-damped handlebar • Solid protective frame • Integrated transport / lifting bar Condition: • Used condition • Signs of wear and tear due to age and use • Scratches and paint abrasion present • Dirt and slight traces of corrosion present • Solid used overall condition Auction-ID: A1-49586-30008

6.5HP; 40cm/s; 13Kn; wheels; foldable; 6528 Auction-ID: A1-50092-654

Unprimed MDF board with the dimension 2620 x 994 mm, with a thickness of 16 mm. Auction-ID: A1-45106-2238

BOMAG BPR 35/60 D Vibratory Plate (Used machine) • Manufacturer: BOMAG • Type: BPR 35/60 D • Machine type: Reversible vibratory plate • Year of construction: 2021 • Serial No.: 101695471730 • Engine: Hatz Diesel • Engine type: 1B20-6 • Motor power: 3.1 kW • Engine speed: 3,000 rpm • Operating weight: 225 kg • Made in Germany Equipment: • Reversible forward and reverse flow • Hatz diesel engine • Hand start / pull starter • Vibration plate • Vibration-damped guide drawbar • Foldable guide drawbar • Solid protective frame • Central transport / lifting bar Condition: • Used condition • Signs of wear and tear due to age and use • Scratches and paint abrasion present • Dirt and traces of corrosion in places • Solid used overall condition Auction-ID: A1-49586-30010

6.5HP; 40cm/s; 13Kn; wheels; foldable; 6528 Auction-ID: A1-50092-99

OSB boards with tongue and groove connection, with a size of 205 x 67.5 x 1.2 cm each. Auction-ID: A1-45106-2281

OSB boards with tongue and groove connection, with a size of 205 x 67.5 x 1.2 cm each. Auction-ID: A1-45106-2282

OSB boards with tongue and groove connection, with a size of 205 x 67.5 x 1.2 cm each. Auction-ID: A1-45106-2283

sheet width: 2050 mm plate thickness: 8.0 mm pre-bending capacity: 6.0 mm upper roll diameter: 190 mm lower roll diameter: 180 mm bending speed: 5.2 m/min work height max.: ca. 980 mm total power requirement: 5.5 kW weight of the machine ca.: 3500 kg. range L-W-H: 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device Inclination of the side rollers by handwheels Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50% - free-moving operation electric delivery rollers electric turning/rolling movement digital position display of the ...

Shaft 16/ 20 mm; Including matching inserts Auction-ID: A1-49785-157

Diameter 44.5 to 54 mm; in 3 x D; unused and in original packaging Auction-ID: A1-49785-259

Features: Brand New Never Used Benchmark Scientific Orbi-Shaker MP Microplate Shaker with 4-Position Platform Auction-ID: A1-50093-346

Characteristics : Capacity Blood bags: 48 - Drawer capacity Blood bags: 6 Dimensions: W x H x D (cm): 44.8 × 25.9 × 38.1 Auction-ID: A1-50093-111

150 pieces WOGX030204; 140 pieces WOGX06T304 Auction-ID: A1-49785-138

Including VCMT11/16, DCMT11T3; mainly shaft 16 and 20 mm; total 53 pieces; in 2 cardboard boxes Auction-ID: A1-49785-153

Quantity: 50 Auction-ID: A1-50093-270

Control Conventional Drive Hydraulic Power [kW] 7.5 Max. sheet thickness [mm] 6 Max. working width [mm] 3100 Type of stop Electric Depth stop [mm] 750 High-holding device None Finger protection fixed Angle adjustment manual Cutting Gap Setting Manual Table type Standard table Auction-ID: A1-40982-37

Tap and Cutting Plates set 110 pieces - Industrial quality - Metric or English (Imperial)/ Metric. Metric: Contents : 2 Wringer No. 1 M2 - M12 - M12 No. 3 M6 - M20 adjustable 1 Tap Stool 2 Insert holder, 25 x 9 / 38 x 14 mm 35 Cutting Plates: M2x0.4 - M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 0.75 - M6 x1.0 - M7 x0.75 -M7 x 1.0 - M8 x 0.75 - M8 x 1.0 - M8 x 1.25 - M9 x0.75 - M9 x1.0 M9 x1.25 - M10 x 0.75 - M10 x 1.0 - M10 x 1.25 - M10 x1.5 - M11 x0.75M11 x1, 0 - M11 x 1.25 - M11 x 1.5 - M12 x 0.75 - M12 x1.0 - M12 x1.0 - M12 x1.25 - M12 x 1.5 - M12 x 1.75 - M14 x 1.0 - M14x 1.25 - M14x 1.5 - M14x 2.0 - M16 x 1.0 - M16 x 1.5 - M16 x 2.0 -M18 x 1.5 70 Taps: M2x0.4 - M3 x 0.5 - M4 x 0.7 - M5 x0.8 - M6 x 0.75 - M6 x 1.0 - M7 x0.75 -M7 x 1.0 - M 8 x 0.75 - M8 x1.0 - M8 x 1.25 - M9 x 0.75 - M9 x1.0 M9 x1.25 - M10 x 0.75 - M10 x1.0 - M10 x 1.25 - M10 x 1.5 - M11 x0, 75M11 x1.0 - M11 x 1.25 - M1 ...

Tap and Cutting Plates set 110 pieces - Industrial quality - Metric or English (Imperial)/ Metric. Metric: Contents : 2 Wringer No. 1 M2 - M12 - M12 No. 3 M6 - M20 adjustable 1 Tap Stool 2 Insert holder, 25 x 9 / 38 x 14 mm 35 Cutting Plates: M2x0.4 - M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 0.75 - M6 x1.0 - M7 x0.75 -M7 x 1.0 - M8 x 0.75 - M8 x 1.0 - M8 x 1.25 - M9 x0.75 - M9 x1.0 M9 x1.25 - M10 x 0.75 - M10 x 1.0 - M10 x 1.25 - M10 x1.5 - M11 x0.75M11 x1, 0 - M11 x 1.25 - M11 x 1.5 - M12 x 0.75 - M12 x1.0 - M12 x1.0 - M12 x1.25 - M12 x 1.5 - M12 x 1.75 - M14 x 1.0 - M14x 1.25 - M14x 1.5 - M14x 2.0 - M16 x 1.0 - M16 x 1.5 - M16 x 2.0 -M18 x 1.5 70 Taps: M2x0.4 - M3 x 0.5 - M4 x 0.7 - M5 x0.8 - M6 x 0.75 - M6 x 1.0 - M7 x0.75 -M7 x 1.0 - M 8 x 0.75 - M8 x1.0 - M8 x 1.25 - M9 x 0.75 - M9 x1.0 M9 x1.25 - M10 x 0.75 - M10 x1.0 - M10 x 1.25 - M10 x 1.5 - M11 x0, 75M11 x1.0 - M11 x 1.25 - M1 ...

Manufacturer: ALTRAD Model: PCX 13/40 Serial No.: FC4012EW102174 Type: Thermal vibrating plate compactor Equipment: Honda petrol engine, manual start by starter, folding handlebar with silent blocks, protective tubular frame, integrated water tank. Notes: Indicated noise level 105 dB. Auction-ID: A1-50088-25

Vibration plate Wacker Neuson VP1135A - Engine Honda GX120 - Impact force 11 KN - Functional Auction-ID: A3-46125-10867

Screw compressor, compressor, stationary air compressor, plate heat exchanger -Manufacturer: Mahle, plate heat exchanger heat recovery for Kaeser screw compressors -Type: PTG 141-281 -Volume flow rate: 1.48 m³/min -Technical data: see photo of the nameplate -Number: 2x heat exchangers available -Price: per piece -Dimensions: 810/385/H660 mm -Weight: 93 kg/unit

Auction-ID: A1-50251-199

Max. working width [mm] 2500 Not completely oil-tight. Auction-ID: A1-40982-15

Control Conventional Drive Hydraulic Number of rolls [pcs.] 4 Number of driven rollers [pcs.] 4 Power [kW] 5.5 Max. sheet thickness [mm] 4 Max. bending thickness [mm] 3.5 Max. working width [mm] 3100 Diameter of the upper roller [mm] 170 Diameter of bottom rollers [mm] 160 Options Digital readout, Conical rolling Auction-ID: A1-40982-91

Operation unknown, tilt adjustment does not work, so it does not release. Control Conventional Power (kw) 5.5 Max Working Width (mm) 2550 Discharge (mm) 130 Depth stop (mm) 1000 Auction-ID: A1-40982-53

ansturing Conventional Drive Hydraulic Max. sheet thickness [mm] 6 Max. working width [mm] 3050 Closure [mm] 200 Depth stop [mm] 1000 Options Digital readout Auction-ID: A1-40982-99

Baykal hydraulic plate shear Type: HGL 3100x6 Year of construction: 2012 Serial Number: 18484 Max. cutting capacity: 6 mm (St42) Cutting length: 3,060 mm Number of strokes: 20 per minute Motor power: 11 kW System pressure: 200 bar Connection: 400 V / 50 Hz / 3-phase Hydraulic reservoir: approx. 140 litres Machine weight: approx. 5,500 kg Dimensions (LxWxH): approx. 3,860 x 2,560 x 1,560 mm Equipped with digital operation/readout Equipped with adjustable backgauge Equipped with hydraulic downholders Equipped with foot control with emergency stop Auction-ID: A1-47364-42

Control Conventional Drive Hydraulic Power [kW] 22.0 Max. sheet thickness [mm] 10 Max. working width [mm] 3100 Cutting speed [mm/min] 13 Depth stop [mm] 800 Auction-ID: A1-40982-49

Number of driven rollers [pcs.] 2 Max. working width [mm] 2000 Diameter of the upper roller [mm] 200 Diameter of bottom rollers [mm] 160 Auction-ID: A1-40982-21

Control Conventional Drive Hydraulic Power [kW] 7.5 Max. sheet thickness [mm] 6 Max. working width [mm] 3050 Depth stop [mm] 750 Auction-ID: A1-40982-17

Control: Conventional Cutting width: 3100mm Cutting thickness: 13mm Electric backgauge Motor power: 22kW Including support arm Auction-ID: A1-40982-58

Batch of formwork material used – 24 plates + 24 panels assembled + 8 scaffolding planks Specifications: Batch of used formwork material 24 loose formwork plates, approx. 1240 × 678 × 18 mm 24 formwork panels, approx. 1200 × 678 × 18 mm 24 panels mounted on wooden rails/beams of approx. 70 × 45 mm Length of wooden rails per panel approx. 1340 mm Total 48 formwork sheets/panels 8 wooden scaffolding planks Scaffold plank length approx. 1660 mm Features: Formwork panels with black coating/paint Wooden Rails/Beams Scaffolding boards , wooden Particularities: Used condition with visible signs of use, paint and wear, coating residue and localised damage Completeness and execution as visible in the photos Sold as one lot Dimensions are measured indicatively Before use, check the condition, flatness and suitability of the material for the desired application A ...

Control CNC Drive Hydraulic Power [kW] 15.0 Max. sheet thickness [mm] 8 Max. working width [mm] 3100 Depth stop [mm] 1000 Auction-ID: A1-40982-112

Brand: Cold master Type: Vista Stainless steel: Yes Electric connection: 230 V Total dimension L: 70 mm Total dimension W: 65 mm Total dimension H: 51 mm Material: Rvs There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-49784-37

On offer is a BMW X6 xDrive30d, finished in Black Sapphire Metallic and equipped with a 3.0-liter six-cylinder diesel engine (engine code N57D30A), automatic transmission and BMW xDrive all-wheel drive. The mileage is 301,156 km according to the odometer displayed. The vehicle has a maximum permissible mass of 2,675 kg and a maximum gross combination weight of 5,495 kg. The maximum permissible axle load is 1,275 kg at the front and 1,460 kg at the rear. The car is equipped with a black leather interior, automatic transmission, BMW iDrive, automatic climate control, multifunction steering wheel, BMW alloy wheels, electric windows, central locking, parking sensors, fog lights and roof rails. There is also a subwoofer installation in the luggage compartment. Vehicle data: BMW X6 xDrive30d; diesel; 3.0-liter engine; engine code N57D30A; automatic transmission; xDrive all-wheel drive; colo ...

Control Conventional Drive Hydraulic Power [kW] 11.0 Max. sheet thickness [mm] 6 Max. working width [mm] 3100 Type of stop Electric Depth stop [mm] 1100 High-holding device None Finger protection fixed Angle adjustment manual Cutting Gap Setting Manual Table type Standard table Auction-ID: A1-40982-26

Without backgauge and without light curtain protection. Without this security it cannot be tested. Control Conventional Brand connection Elgo Drive Hydraulic Guillotine version Max. sheet thickness (mm) 6 Max. Working width (mm) High-holding device Pneumatic Finger protection fixed Angle adjustment Motor Cutting Gap Setting Motorized Auction-ID: A1-40982-124

Control Conventional Drive Hydraulic Power [kW] 16.0 Max. sheet thickness [mm] 6 Max. working width [mm] 3150 Extrusion [mm] 160 Depth stop [mm] 1000 Options Digital readout Auction-ID: A1-40982-92

IN WORKING CONDITION. TESTED FOR FUNCTION. There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-49784-16

sheet width: 2040 mm plate thickness: 6,0 mm distance between columns: 2100 mm roll diam. toproll: 180 mm roll diam. bottom roll: 160 mm total power requirement: KW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 3,5 x 0,85 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working length: 1270 mm Roller Ø: 120 mm Max. sheet thickness: 4.5 mm Sheet thickness at bending: 4 mm electr. Connection: 400 V, 2.2 kW Weight: 1250 kg Space requirement: 2300 x 800 x 1100 mm

Jaw opening: 50-100mm. Includes 1 lifting hook (self-made) Auction-ID: A1-49889-163

equipped with backgauge, foot control, angle guide. Auction-ID: A1-50090-125