129,275 used machines on RESALE, but how to find them? Machine Search
FRAMECAD F300i roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is the perfect choice for the efficient production of lightweight steel structures. This is because the FRAMECAD F300i enables the precise forming of C- and U-type cold-formed profiles of various dimensions (89 mm as standard), which are used in, among others, partition walls and bathroom modules. The machining process is fully automatic. The strip with a maximum thickness of 1.2 mm is uncoiled from the coil towards the workspace with a special roll forming system. Each profile is precisely formed, cut, punched, and marked, making them ready for direct assembly with screws. The FRAMECAD F300i roll forming machine is controlled via a touch panel with an intuitive interface. The full integration of advanced design software with the controller ...
FRAMECAD TF550 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact TF series (Truss and Frame) production line is an excellent choice for the mass production of fabricated solutions for the residential and commercial buildings. This is because the FRAMECAD TF550 enables the production of C- and U-type cold-formed profiles in various sizes (150 mm as standard), used as rafters, trusses and steel structures in a wide range of building projects. The entire production cycle is fully automatic. The strip, with a maximum thickness of 1.6 mm, is uncoiled from the coil towards the workspace, where it is machined by means of a special roll forming system. The profiles are accurately formed, cut, punched, dimpled and marked, making them ready for simple assembly with screws. The machine is operated via a touchscreen panel with an in ...
FRAMECAD FL650 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is used in the production of precision C- and U-type cold-formed profiles, used as steel floor joists in a wide range of construction projects. The entire machining process is fully automatic and is performed with the highest accuracy. The strip, with a maximum thickness of 1.95 mm, is uncoiled from the coil towards the workspace with a roll forming system. Each profile is precisely formed, cut, punched and individually marked. Large service holes are also made to facilitate the assembly of electrical, HVAC and plumbing systems. The FRAMECAD roll forming line is operated via a touchscreen panel with an intuitive interface that significantly simplifies the daily work of the operator. The full integration of advanced design software with the cont ...
We are pleased to present our complete commercial and technical offer for an unused 2 × 750 MW Combined Cycle Gas Turbine (CCGT) Power Plant, based on GE Frame 9FA technology, supplied, installed, but not commissioned. The plant equipment is available as a complete package, including major equipment, auxiliaries, and Balance of Plant (BOP). 1. Plant Configuration Overview Total Configuration: • 2 × GE Frame 9FA Gas Turbines • 2 × CMI Triple Pressure HRSG • 1 × GE Steam Turbine • Combined Cycle Output: ~750 MW per block Status: • Installed / partially installed • Not commissioned • Units have never been fired or operated 2. Gas Turbine Island Gas Turbines • Quantity: 2 Units • Manufacturer: GE • Model: Frame 9FA +e DLN2+ • Fuel: Dual Fuel • Frequency: 50 Hz • Site Rated Output: 241,000 kW per unit • Year of Manufacture / De ...
Syspal 600HA2 Eurobin wash frame 2021, stainless, SWL 50Kgs, 3Ph
Fogg & Young C Frame Press 150ton 3400mm wide Upstroking 3x heating zones Eurotherm controllers
ID3356 Corrosion repair framework year/Baujahr 2021 25-28 t Corrosion repair framework Corrosion Touch Up Scaffolding
GE Frame 6B Gas Turbine Complete Power Plant. Gas Turbine Model GE Frame 6B GT Model No. 6541B Manufacturer General Electric Year of Manufacture 1990 Equivalent Operating Hours (EOH) Approx. 120,000 Hours Plant Scope Complete Plant Fuel Type Natural Gas Frequency 50 Hz Rated Output Approx. 38–42 MW (typical for Frame 6B simple cycle Frequency 50 Cooling System Air / Hydrogen (subject to configuration) Excitation System Included 1. Gas Turbine Package Item Description Gas Turbine GE Frame 6B Combustion System Standard Combustion Starting System Included Lube Oil System Included Fuel Gas System Included Air Intake System Included Exhaust System Included Fire & Gas System Included GT Base & Enclosure Included Inlet Filtration Included
used
Overview Offered complete power plants, This unit is known for their high availability and flexibility in fuel use. Ideal for industrial power generation or as reserve capacity. Specifications • Model: GE Frame 6B (6541B) • Year of construction: 1986 • Operating hours (EOH): 114,000 hours • Operating system: Mark II (M-II) Control System • Configuration: Complete plant (Generator, Turbine and all auxiliary systems) • 1. Gas Turbine Package • Item Description • Gas Turbine GE Frame 6B • Combustion System Standard Combustion • Starting System Included • Lube Oil System Included • Fuel Gas System Included • Air Intake System Included • Exhaust System Included • Fire & Gas System Included • GT Base & Enclosure Included • Inlet Filtration Included • Main features • Complete 'Balance of Plant' (BOP): The sale includes not only the ...
The scope of delivery includes: 01x Stand protector, used Manufacturer: Nedcon Material color: blue Drhw0R Total height: approx. 900 mm Stand protector height: approx. 800 mm Total width: approx. 110 mm Inner width: approx. 102 mm Total depth: approx. 45 mm Material thickness: approx. 4.00 mm Leg size: approx. 65 x 65 mm Height deflector: approx. 50 mm Drill hole spacing: approx. 60 mm Drill hole diameter: approx. 11 mm suitable for frame profile width: 100 mm including mounting material composed of: 04x Hexagon Bolt M 10 x 35 mm 04x Hexagon Nut M10 08x Washer M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately d ...
2x GE Frame 6B gas turbines # Technical Summary Equipment Details - Gas Turbines: Two GE MS 6001 B gas turbines paired with AEG generators (Type S7102/2). - Operation History: - Commissioning: 1981 - Gas-fired Operation: Until 2005, primarily for base load (~7000 hours/year). - Operational Hours in Combined Cycle: - GT21: ~167,000 hours, ~1130 starts - GT22: ~159,000 hours, ~1180 starts - Retrofitted: In 1996 with water injection for NOx reduction. - Conversion: In 2007 to peak load operation using heating oil (HEL) with new steel chimneys and upgraded control systems to ABB Procontrol 14. - Operational Hours in Peak Load: - GT21: ~130 hours, ~177 starts - GT22: ~150 hours, ~180 starts - Last Network Operation: 2015 - Last Oil Service: - GT21: October 2015 - GT22: September 2016 - Last Borescope Inspection: December 2016 - Defect: Heating oil transfer line issue in 2 ...
Caterpillar SR4 - Overhauled - 1000 kW - 806 frame
Hydraulic 30 ton C-Frame Press CAVENAGHI & RIDOLFI Technical data Nominal Power : 30 ton Year of manufacturing: 1973
Hydraulic 60 ton C-Frame Press CAVENAGHI & RIDOLFI Nominal Power : 60 ton Year of manufacturing: 1975
Key data: 300 t, 800 mm
Hydraulic Press Emanuel 300 ton Year of construction: 1989 Dimension table: 1600 x 1300 mm Light max: 1130 mm Light min: 350 mm Slide stroke: 800 mm Cushion stroke: 400 mm Side upright clearance: 640 mm
Key data: 800 t, 1350 mm
Hydraulic Press Gigant 800 ton Year of construction: 1997 Dimension table: 3200 x 2200 mm Light max: 1800 mm Light min: 450 mm Slide stroke: 1350 mm Cushion stroke: 510 mm Side upright clearance: no
Key data: 1200 t, 1000 mm
Hydraulic Press Gigant 1200 ton Year of construction: 1993 Dimension table: 3700 x 2700 mm Dimension lower table: 3700 x 2700 mm removable Light max: 1590 mm Light min: 610 mm Slide stroke: 1000 mm Cushion stroke: 400 mm Side upright clearance: no
This Eisele BSD304 is a powerful, electrically driven wastewater pump, designed for reliable use in industrial and construction applications., Thanks to its robust construction and high pumping capacity, this model is ideal for pumping contaminated water, sludge, and liquids containing solids., The pump is driven by a 400V electric motor and combines durability with energy efficiency., The cast iron housing and corrosion-resistant components ensure a long service life, even with continuous use in harsh conditions., , Key features:, , Voltage: 400V (three-phase), Pump type: Centrifugal, wastewater, Suction head: up to approximately 7 meters, Delivery head: up to approximately 20 meters, Pump body material: wear-resistant cast iron, , Suitable for: construction sites, sewage work, agriculture, and water management, , Easy to maintain and ready for immediate use, , The Eisele BSD304 is a re ...
The Eisele BSE740 is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk)., , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 1999, Empty weight: 450 kg ...
The Eisele BSE740 EX Explosion-proof is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk)., , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 2016, E ...
The Eisele BSE740 is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk)., , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 1995, Empty weight: 450 kg ...
Dimensions (L/W/H): 3600x800x1900 mm Weight: 2400 kg Total power requirement: 16 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Brückner Type of Machine : Clamping Frame Working width: max. 2200 mm Roller width: max. 2400 mm Number of temperature zones/sections: 3 Calator: 2250 mm Find more here - / Contact us at -
Downpour record Grey iron GGG50 1500 x 1500 chamber filter records Downpour records for chamber filter pressing 1500x1500 we can offer to you for almost all arrangements chamber filter records also in PP, filter cloths and spare parts almost all manufacturer.
Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 600 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...
Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 800 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...
Frame loose without packaging Auction-ID: A1-47205-2663
Frame loose without packaging Auction-ID: A1-47205-2674
Frame loose without packaging Auction-ID: A1-47205-2704
Hyraulik press 51x Kunstoffplatten Plate formats: 600x600 Platefilter features: Manual spindl dimension ca. 250x90x130 cm Distance between first plate and spindle approx ca. 90cm
used chamber filter records 1000 x 1000 PP approx. 190 pieces in the camp
Krings Verbau various base plates with mounting plate dimensions, spindles, etc. in the package or individually for sale Mass and guide can be requested to e-mail Price VB
Straightening plate measuring plate measuring plate reinforced plate made of steel casting used. Length approx. 3560 mm Width approx. 985 mm Height approx. 910 mm (adjustable) with 5 feet Casting tear ingenuous plate with height-nivelable feet, support ball-bearing Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
max. plate width: 80 cm stamp width: 425 mm serial no.: 174 plate punch autoplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 80 cm stamp width: 425 mm serial no.: 564 plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 plate clamping system: autoplate plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 weight: 12 kg dimensions of press (L x W x H): 70 x 13 x 55 cm plate clamping system: Autoplate for QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 80 cm stamp width: 425 mm serial no.: 1132 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 80 cm stamp width: 425 mm serial no.: 5136 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 52 cm stamp width: 220 mm serial no.: 16548 plate punch for GTO or QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 50 cm stamp width: 220 mm serial no.: 4184/20 Dimensions (L/W/H): 60x20x50 mm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 920 cm stamp width: 425 cm Dimensions (L/W/H): 550/1000/1220 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 74 cm stamp width: 340 mm serial no.: 13434 dimensions of press (L x W x H): 80 x 95 x 120 cm weight: 100 kg Thermo plate bender for The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 52 cm stamp width: 220 mm serial no.: 3851/15 Dimensions (L/W/H): 60x20x50 mm plate punch QM 46 or GTO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 1520 cm stamp width: 780 mm dimensions of press (L x W x H): 150 x 58 x 128 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
stamp width: 425 mm serial no.: 6660/39 Dimensions (L,W): 71 x 55 cm plate punch for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Base plate, turntable, machine vice -Base plate with angle scale -Dimensions: see photos -Dimensions total: Ø 395 x 50 mm -Weight: 18.6 kg
BPR 50/55D #101692861161 used Operating hours 491,4h Auction-ID: A7-47086-50
maximum number of results exceeded
please refine your search
40 € 
