plate bending roll used for sale

Screen PlateRite 4300E, Year 2008 only approx. 20K plates done RIP York Workflow Inlinepunch 425 Azura C95 Clean out unit Available: at short term

4-rolls Kramatorsk plate bending machine Ultimate tensile strength of material: 500 MPa (50 kg/mm²) Yield strength – cold bending: 250 MPa (25 kg/mm²) Yield strength – hot bending (primary): 100 MPa (10 kg/mm²) Yield strength – hot forming (secondary heating): 45 MPa (4.5 kg/mm²) Elongation at cold state: ±18% Maximum sheet width: 4000 mm Max sheet thickness – cold, without pre-bend: 71 mm Max sheet thickness – cold, with pre-bending: 63 mm Max sheet thickness – hot forming: 150 mm Minimum bending radius – cold: 560 mm Minimum bending radius – hot: 600 mm Maximum radius for closed bending (curled edge): 1000 mm Main motor: 160 kW Weight: 730 tons

Plate bending machine 3 ROLL HYDRAULIC MODEL 2500 X 6 MM year 2001 PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH Bending capacity -Plate width : 2500 mm -Rolling plate thickness: 6 mm -Prebend thickness: 4 mm Rolls dimensions: -Useful length 2600 mm -top roll D 190 mm -side rolls D 170 mm Configuration of the machine Rolls hardened induction treatment, high strength surface of the 3 rolls • Power driven total on the 3 rolls, hydraulic motor each roll • Conical bending hydraulic attachment • Re-rolling system welded shells rounding. • Opening hydraulic front drop-end • Electric 3 phase 380/50 Vac, power 5,5 Hp. • Speed infinitely variable slow-fast stepless • Digital position readouts of the bending  ...

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 50 mm -Transport width: approx. 500 mm -Wave: Dimensions see photos -Number: 8x transport rollers available -Price: per piece -Overall dimensions: Ø 50 x 540 mm -Weight: 1.2 kg/piece

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 50 mm -Transport width: approx. 570 mm -Wave: Dimensions see photos -Quantity: 12x transport rollers available -Price: per piece -Overall dimensions: Ø 50 x 620 mm -Weight: 1.4 kg/piece

Limpet coil roller machine hydraulic To form half round pipe from flat metal strip and bending into wanted radius with spiral continuous. Manufacture MG srl Year 2002 -Shafts output 80 mm -Interchangeable set of molds to form half pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the bending, the pitch of the spiral, the shape of the half tube forming -hydraulic arm movable in 3 directions to set the pitch for continuous coil rolling -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the spiral from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital posi ...

Key data: 100 mm, 160 mm, 115 mm

Profile bending machine model PP100 Output shafts 100 mm fully hydraulic operated lower shafts motion independent pyramid pinch -all the 3 shafts driven with gear unit and hydraulic motor -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed

PROFILE BENDING ROLL SHAFTS OUTPUT 90 MM - PIPE BENDING ROLL MARGI CA90H2 YEAR 2007 SHAFTS SIZE 90 MM SET OF UNIVERSAL ROLLERS SIZE 260 MM LATERAL CORRECTOR ROLLERS LEFT/RIGHT SIDE SCREW ADJUST 4 SET OF ROLLERS FOR TUBE BENDING MM 61 – 78 – 90 – 116 – CONSOLE ELECTRIC MOVABLE ON WHEELS ALL THE COMMANDS CENTRALIZED DIGITAL POSITION READOUT OF BENDING ROLLS UPPER ROLL DRIVEN MOTORIZED ELECTRIC POWERED WITH GEAR UNIT SIDE ROLLERS HYDRAULIC ADJUSTMENT POWERED INDEPENDENT WITH PISTONS CAPACITY CHART IN ENCLOSED FOR MACHINE PERFORMANCES MACHINE REVERSIBLE CAN WORK WITH SHAFTS VERTICAL AND HORIZONTAL SAFETY AND EMERGENCY STOP INSTALLED WITH THE MACHINE MANUALS AND SCHEMATICS DOCUMENTS IN ORIGINAL DIMENSION 1260 X 1000 X H1260 MM -WEIGHT 1000KG

div. Pallet transport Chains/rolls for Düdo pallets and Euro-industry pallets Unit price: from 700,00 € with drive

1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...

2pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.10 SX02 or 10.12,5.10 SX02 A furnace for 20 sheets Oven is in very good condition, General and thorough overhauled. Works like new. A good steam. Secondary circuit for the baking Chamber. Turbo equipment. All maagnetic pump incl. daub thermal oil boiler system with magnetic pump including. 4 piece rack new Sales including freight and installation upon request I also have to sale 2pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.7 (7 Edition, high shelves)

STRIP WIDTH: 750 MM, ENTRY THICKNESS: 0.5 MM, EXIT: 2 x 0.007 MM,

GINES, Barcelona 800mm wide x 350mm dia two roll mill, Machine number: 88, manual nip adjustment, adjustable guide plates, friction ratio 1:1.18, direct drive gearbox (on left hand side), with 60HP DC variable speed motor, Mentor II DC drive control panel. O/a dimensions 2750mm x 2100mm.

<b>Features:</b> Used pallet roller conveyor from Pack & Roll GmbH Fuesse to order separately Geraeuscharm Condition: fully functional with traces of use Ideal for fast material transport Professionally dismantled and packaged Color: Silver Drive: Gravity Total 14.58m plug available <b>Technical data: </b> Dimensions of the roller conveyor Total quantity in stock: approx.: 14.580mm Length per segment: 3645mm Total width: 1150mm One brake roller is available per segment Diameter of brake roller: 90mm <b>Details of the role</b> Clamping length: 1055mm Diameter approx.: 60mm Axis distance: 130mm, adjustable Material: steel, galvanized <b>Information on the framework</b> Height: 80mm Width: 40mm <b>Pallet roller conveyor</b> The roller conveyor is ideal in the picking zone for int ...

Reed 42" x 16" Two Roll Mill. 40HP Motor, with clutch brake. Friction ratio 1.1 Manual Nips. On one-piece steel bedplate.

HIGH PRODUCTION BABCOCK ROLLERS DRYER

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Manafacture: Budde Condition: Used Drive type: motorized vertical shaft Total length outside: approx. 1560 mm Total length inside: approx. 1850 mm Total width incl. motor: approx. 800 mm Total width without motor: approx. 470 mm Conveying width: approx. 440 mm Material: steel, plastic Colour: light grey Includes feet (height adjustable) and motor gearbox (North 0.55 KW) Ejector/ Smuggler/ Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to pro ...

Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pallet roller conveyor/ roller conveyor/ pallet conveyor technology Manufacturer: Claus Maschinenbau Condition: Used Drive type: Chain drive Plant consisting of: 12 segments 9x approx. 5.75 meters in length 1x approx. 5.30 meters in length 1x approx. 2.00 meters in length 1x approx. 0.95 meters in length Each element is equipped with its own motor. Total length: approx. 60 meters Total width incl. motor: approx. 1250 mm Total width without motor: approx. 1020 mm Conveying width: approx. 820 mm Roll diameter: approx. 80 mm Axes/roller spacing: approx. 80 mm Frame width: approx. 85 mm Frame height: approx. 185 mm Colour: blue Pallet guide included Including SEW motors 1.1 KW Includes feet - height adjustable Price per meter  ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor/ conveyor technology/ conveyor conveyor conveyor -powered Condition: Used Total length: approx. 10400 mm Plant consists of 4 segments Segment length: approx. 2600 mm Drive type: Chain drive Total width incl. motor: approx. 1350 mm Total width without motor: approx. 1130 mm Conveying width between rollers: approx. 900 mm Roll width: approx. 1010 mm Wheels/axle distance: approx. 165 mm Roll diameter: approx. 70 mm Web height: 100/ 50 mm Material: Steel Color: orange Stock: 10.4 meters Price per meter Conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for yo ...

Foerder band rolls, rollers for foerder tape or roller conveyor Ball bearings for heavy loads. GST roll 133.0mm/20mm pipe length 1.150mm GUP 88.9/20mm/750/756/782/SW14/13 Roller load 750 Clamping 756mm Diameter approx. 89 to 133mm, various lashings, partly coated with rubber. Steel carrying roller / Foerderband rollers / Roller conveyor rollers According to photos; Unused Special price

1 x Heavy duty 2 roll mill Roll dimensions: 2100mm x 665mm dia. Hydraulic nip adjustment, Safety push bars, Peripherally drilled rolls, Sleeve bearings with grease lubrication, Right angle drive gearbox, with Siemens 240kW DC variable speed motor, Strip knives fitted to front roll, Heavy duty fabricated bedplate, Carter stockblender mounted on top.

<b>Properties</b> Used pallet roller conveyor of the manufacturer of rack & roll GmbH Condition: Excellent condition with light wear Color: Silver Feet must be ordered separately Expertly disassembled and packed Pre-assembled on a length of 2,640 mm Including a drag reel per item Price per meter <b>Technical data Pallet roller conveyor dimensions approx.</b> Total length of an element: 2,640 mm Total width: 930 mm <b>Mass of the rollers and the frame about</b> Clamping length approx.: 835 mm Diameter approx.: 60mm Distance approx.: 150mm Material: Steel, galvanised Frame: 80x40mm Brake pulley diameter: 90 mm In stock: 140 metres <b>Pallet roller conveyor</b> Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination.  ...

Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

Complete with; push button magnetic starter and safety guards 220 Voltage

This is a leveling kit with wheels, for movable Combi-Duo from the manufacturer Rational. The levelling kit is suitable for the Rational combi steamers of the iCombi series size 6-1/1 and 10-1/1. RRP: 333,90 € The price quoted is gross incl. 19% VAT. Are you looking for a specific Rational appliance type? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. OUR USED EQUIPMENT SERVICE FOR YOU High-quality brand-name appliances at fair prices Professional overhaul / inspection & expert cleaning tested & fully functional - or money back Shipping or self-collection can be flexibly selected Competent advice - before and after the purchase Provision of operating instructions, connection diagrams and spare parts Testing according to ...

Fliss bohrer and thread rolling NC machine. Machine was rebuilded in 2019, complete Hardwere, and pneumatic components, and part from electric. Machine can be used for serial tube production, can be aded Robot for manipulating. Machine will be able to connect with a handling robot for fast delivery and high productiion.

: . mm Working width: . mm Wheel width: . mm Roller conveyor length: 5500 mm Roller conveyor width: 1200 mm : kg Length: 5500mm, width: 1200 mm, roller diameter: 170 mm, drive height 750 mm, 6000x2000x800 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: . mm Working width: . mm Wheel width: . mm Roller conveyor length: 3000 mm Roller conveyor width: 600 mm : kg Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: . mm Working width: . mm Wheel width: . mm Roller conveyor length: 3000 mm Roller conveyor width: 600 mm : kg Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: . mm Working width: . mm Wheel width: . mm Roller conveyor length: 3000 mm Roller conveyor width: 600 mm : kg Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: . mm Working width: . mm Wheel width: . mm Roller conveyor length: 3000 mm Roller conveyor width: 600 mm : kg Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Design: stable -without: roller conveyor drive motor -Roll width: 557 mm -Conveying length: 680 mm -Diameter roll: 70 mm -Dimensions: 875/700/H125 mm -Weight: 44kg

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 620-1040 mm adjustable -Roll width: 355 mm -Dimensions: 480/480/H620 mm -Weight: 16 kg

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Rolls: Ø 89 x 330 mm -Roll width: 330 mm -Dimensions: 435/580/H720 mm -Weight: 20.5 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor: not driven -Roll width: 500 mm -Rolls: Ø 50 mm -Roll distance: 135 mm -Transport dimensions: 2055/555/H100 mm -Weight: 36 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -Roll width: 410 mm -Diameter roller: 50 mm -Roll speed: 21 m/min -Drive for: slewing ring SEW-Eurodrive 0.18 kW with brake -Dimensions: Ø 870/1035 mm -Weight: 162 kg

Roller conveyor, conveyor belt, roller track -Roller conveyor: 5 floors -Roller width: 300 mm -Rollers: Ø 50 mm -Roller spacing: 150 mm -Floor spacing: 700 mm -Overall dimensions: 650/400/H3010 mm -Weight: 72 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -Roller conveyor: with hydraulic drive -Roll width: 500 mm -Diameter roller: 50 mm -Center distance: 70 mm -Hydraulic motor: Danfoss type OMM 12.5 -Dimensions: 1200/700 / H180 mm -Weight: 41 kg

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roller height: max. 1335 mm, adjustable -Roll: Ø 25 x 350 mm -Dimensions: 550/520/H970 mm -Weight: 13 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor: not driven -Execution: difficult -Roll width: 940 mm -Roles: Ø 79 mm -Roll distance: 100 mm -Dimensions: 1670/1070/H280 mm -Weight: 206 kg

Reed 40” x 16” Two Roll Mill Hand operated nips Right angle drive Tray fitted beneath Mill Rolls

YEAR 2013 THREAD ROLLING MACHINE EXCELLENT CONDITION

REF-2357 WORTHINGTON CREYSSENSAC ROTARY-SCREW AIR COMPRESSOR Rotary-screw air compressor. Manufacturer: Worthington Creyssensac. Brand: ROLLAIR. Model: ROLLAIR 75. Compressor: - Rated power: 55kW/75HP - Refrigerated air volume: 9,000m3/h - Sound level: ± 70dB - Weight: ± 1,400kg - Compressed air outlet Ø: 2” - Operating pressure: 12.5 bar Compressor motor: - Manufacturer: LEROY SOMER - Model: AP180LGU-T - Power: 55kW/75HP - 2,945 Rpm - 400V/100A Complete with instruction manual.

Roller conveyor length: 2200 mm Wheel width: 650 mm Roller conveyor width: 900 mm : 2000 kg Dimensions (LxWxH): 2,2x0,9x0,7 m Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- for the production of sliced rolls, smooth rounds, long rolled rolls and double pieces Year of construction: 2007 Weight range: 30-85 g Hourly output: max. 3,000 pieces 4-row system with 600 mm working width Integrated dough divider and drum transformer, Multimatic Pre-fermentation time 12 min (6 min before long roll station and 6 min between long roller and cutting station)Hanger drying Variable depositing device for digestate carriers of 3 Euro sizes: 400x600 / 580x780 / 580x980 mm UV Disinfection StationSiemens Touch Screen Control External dimensions (LxWxH): 3000x1250x2550 mm

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roller height: 850 - 1500 mm adjustable -Roll: Ø 80 x 840 mm -Plate below: Ø 480 mm -Price: per piece -Number: 2 pieces -Dimensions: 915/480/H850 mm -Weight: 44 kg/piece

TECHNICAL SPECIFICATIONS Manufacturer: FAM Designation: Walzenmühle Type: 1004 H Year of construction: 1996 Machine size: 1004 Roller diameter: 1,000 mm Roller width: 400 mm Roller speed: n = 122 1/min Roller circumferential speed: v = 6.4 m/s Machine V-belt pulley: ∅ 800 mm Transmission V-belt pulley: ∅ 400 mm Drive power: 2 x 22 kW, 233 1/min, 400/690V Drive type: SEW gear motor R 102 DV 180 L4 TF Total weight: 8.9 t Materials Roller jacket: G-X 110 MnCr 18.2 Wear plates: Hardox 400; 20 mm Material guidance: Hardox 400; 15 mm SPECIFIC COMMENT - Including hydraulic unit and control - Previous service life approx. 5 years

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor: not driven -Roll width: 610 mm -Transport length: 700 mm -Roll diameter: 63 mm -Roll distance/center distance: 100 mm -Dimensions: 780/620/H165 mm -Weight: 29 kg