plasticservice used for sale

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 25230 € : 1250x2500 mm : HYPERTHERM Powermax 45 XP : 6 mm : 12 mm : 25 mm : 4 mm : 45 A : 45 A 50 % ED, 32 A 100 % A : 24 m/min : 1/10 mm : 470 l : 500 kg/m² : 3060 mm : 1760 mm : 1500 mm : 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air co ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 22750 € : 1000x2000 mm : HYPERTHERM Powermax 45 XP : 6 mm : 12 mm : 25 mm : 4 mm : 45 A : 45 A 50 % ED, 32 A 100 % A : 24 m/min : unter 1/10 mm : 300 l : 400 kg/m² : 2560 mm : 1460 mm : 1500 mm : 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules alternative plasma sources: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air c ...

Plastic sheets, plastic laminate -different sizes -Thickness: 6mm -Outdoor outdoor area: can be used -on: 2 pallets -Sale: only complete -Dimensions: 1450/3100/H340 mm -Weight: 720 kg

Plasma cutter, plasma cutter -Equipment: without hose package -Cooling: Water cooled -Max. Cutting current: 70 A -Mains voltage: 3x400V

with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT

Plastics Recycling Extruder PP=900-1000kg Complete Line

Description: Extruder Plastmachines extrusion machine PME 80/35 Manufacturer: Plastmachines extrusion type: PME 80/35 Year of construction: 2004 Type of offer: second-hand machine Technical data: Plastmachines extrusion machine type: PME 80/35 control:-year: 2004 injection unit screw size mm: 80 additional information 75 KW power 250-300 kg / h degassing system complete granulation plant heating tee Kuehlsiepsystem 75 KW power 250-300 kg / h degassing complete granulating heating tea cooling system siep

Compounding plant for fiberglass contaminant PE/PP Snail/LD 70/38 Material: PE, PP // Extruder with high-wear process unit (HIP), segmented screws and cylinders of 70 mm / 40D, AC-motor 260 kW,, degassing, continuous rotor, vacuum pump, pressure transducer, 4-fold dosing, 3+1-fold gravimetric dosing, side-dose PSF 46, strand head, water bath, strand granulator, temperature control unit, water cooler, material conveyer, Siemens S7 central control with visualization

Material: PE, PP, PS, ABS + talc, fibers / Details: twin-screw extruder PLAMA ZSP 70, segmented screws and cylinders, DC motor 260 kW, degassing, vacuum pump, side feed, low temperature control unit SINGLE, 4+1 gravimetric dosing BRABENDER incl. working platform, screen changer GNEUSS RSF 150, start-up crossover, underwater granulation GALA MAP6 with cutting rotor, water system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization SIEMENS Multi Panel 270B Touch. Power: approx. 600 - 800 KG/hr

Plastak HR8 8 stations, for injected leather In working order and with the possibility of seeing it in operation

Plasmacutting machine for plates amp; tubes! Type: MG 12001.35PPr + CH1200PP 2 plasma cutting heads Hypertherm HPR130 powersource Esab Kjellberg Fine Focus 800 powersource

Catalog No. 6822 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 5 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm; (2nd and 3rd spindle) 7.5kW 4) horizontal top 230mm 5.5kW 5) universal spindle 230mm, right/left rotation adjustment 5.5kW - all spindles adjustable up / down, right / left - all spindles equipped with an electric brake - spindle diameter 40mm - from above, 4 metal, toothed introductory rollers - 3 pulling rollers from above, rubber, smooth, including 2 double - from the bottom, a rubber roller, pulling - side pressure from below - 2 types of feed speed - feed motor 1.2 kW - electric setting of planing thickness - length of the introductory tabletop 2500mm - locked in the cabin - central lubrication of the countertop - diameters of the extraction spigot 150mm, 4x120mm - ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 28370 € : 1500x3000 mm : HYPERTHERM Powermax 45 XP : 6 mm : 12 mm : 25 mm : 4 mm : 45 A : 45 A 50 % ED, 32 A 100 % A : 24 m/min : 1/10 mm : 630 l : 400 kg/m² : 3560 mm : 1960 mm : 1500 mm : 650 kg Druckluft betriebene Plasmaquelle HYPERTHERM Powermax 45 XP CNC-Workbench Software (externer PC nicht inkludiert) Einstellbare Laufrollen Präzisions-Profilschienenführung (HiWin) Spielfreier HTD-Zahnriemen Antrieb über Schrittmotoren Stabile Rahmenkonstruktion Einzeln erneuerbarer Auflagerost Wasserwanne als Funkenfang Schwimmende Brennerlagerung in Verbindung mit austauschbaren Gleitschrauben, sorgt für eine konstante Schneidhöhe Handbedienung für bequemes Verfahren und Einrichten am Werkstück Betriebsanleitung auf DEUTSCH Ausrüstung gemäß CE Vorschriften ALTERNATIVE PLASMAQUELLEN: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync P ...

: neu : 2024 : 2517 : Juni 2024, Zwischenverkau : Deutschland : 36950 € : 750.09 € : 1500x3000 mm : Hypertherm Powermax 105 S : 22 mm : 22 mm : 50 mm : 19 mm : 105 A : 105 A : 24 m/min : 1/10 mm : 400 kg/m² : 3560 mm : 1960 mm : 1500 mm : 650 kg compressed air powered plasma sourceHYPERTHERM Powermax 105 Sync CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTIONS: Height adjustment by arc voltage Set-up laser Suction bridge (prepared for suction dia ...

Compounding system with underwater granulation. Material: PE, PP, PS, ABS (+ fillers) // Details: DC motor, DC rotor, segmented screws (2x x 70 mm / 40D) and cylinders, degassing, vacuum pump, stuffing unit, backwash screen changer GNEUSS RSF 150, underwater granulation GALA with cutting rotor, water circulation system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization. Available at an additional cost: Sidefeeder, 4-fold gravimetric dosing system. (Ref. No. G27615.2)

Material: PS, PE, PP, PA, // Details: DC motor 145 kW, screw revolutions: up to 600rpm, screw diameter 70 mm, L/D 32, segmented screws and cylinders, degassing (optional vacuum pump), control: Siemens S7 with visualization. incl. strand nozzle with water bath and strand granulator, motor up to 265kW possible. For extra charge: underwater granulation, or water ring granulation

TECHNICAL DATA: Working width mm: 530 Working height max mm: 300 Number of knives: 4 Feedrate max m/min: 19 Total connection kW: 4 Weight Kg: 800

Length: 0 mm Width: 0 mm Thickness: 0 mm Accuracy class: 0   Type of material: 0   Technical data Dimensions: Length: 630 mm Width: 400 mm Height: 80 mm

Was used for cleaning perforated metal sheets, including documentation, without accessories or spare parts.

Description: Contents consisting of 2 measuring stands with dial gauges, one of which is digital from the manufacturer MITUTOYO weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm

Description: Semi-automatic horizontal film wrapping machine Rotation speed: 350 rpm Speed regulator: Omron Consumption: 0.36 Kw Film roll specifications: 100 mm wide, 23 micron thick Manual operation Adjustable speed Automatic start and foil cutting Horizontal roller conveyor with free-running rollers Vertically adjustable rollers to facilitate guiding of the packages Adjustable winding tension depending on the product to be wrapped Double unroller for working with 1 or 2 rolls of stretch film to speed up throughput Safety pedal for starting and stopping the machine CE approved Approx. Onsite Dimension. (l x w x h): 700 x 1,000 x 1,500 mm, weight approx.: 100 kg

Description: Degree of accuracy DIN 876/0 Permissible deviation 0.007 mm actual deviation 0.00384 mm weight approx.: 173 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 120 mm

Pipe peeling device, rotary peeling device, plastic pipe cutter, plastic pipe peeler, plastic pipe welding device -Diameter: Ø 63 mm -Weight: 0.6 kg

Pipe peeling device, rotary peeling device, plastic pipe cutter, plastic pipe peeler, plastic pipe welding device -Diameter: Ø 32 mm -Weight: 0.4 kg

product width 240-300mm product length 200-450mm film thickness 0.008-0.02mm two lanes production speed max 500 pcs per minute machines are almost unused

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

plate width: 7000 mm plate depth: 5250 mm plate height: 330 mm weight: ca. 4400 kg Dimensions: Length: 7000 mm Width: 5250 mm Height: 330 mm The panel field comprises six clamping plates with the following dimensions: 1750 mm x 3500 mm The plates are also available individually. Total Area: 36.75 m² T-Slot Specifications: Number of T-slots: 21 T-slot Spacing: T-slot Dimensions: 58 mm x 34 mm T-slot Depth: 60 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic C-frame press Tool testing press / straightening press Pressure power hydraulic unit approx. 400kg/cm2 Printing capacity of the press approx. 270to Partially overhauled! Hydraulic cylinder sour overhauled, recoat Table clamping area 1.300x500mm Flat of the printing plate 700x400mm Number of T-slots 2 pcs with width 22mm Piston rod diameter 290mm maximum installation height 750mm Piston path 350mm Extension C-frame to center piston 270mm Extension C-frame to front edge pressure plate 480mm Width C-frame 500mm Aeussere Dimensions Depth 1,800mm Width 1,300mm Rxvukelzy Height approx. 3,000mm Weight approx. 5to Rest according to photos Special price

Whisper compressor Planet Air double piston; as good as new condition; double pistons; 8 bar; Boiler 50 liters. Whisper compressor Planet Air double poppet; condition as new; double poppet; 8 bar; tank 50 liters.

PLASOMAT PMS 63 CP eccentric press was manufactured in Poland. In order to meet all production requirements, the machine features a large area slider with the possibility of adjusting the height and number of strokes in the control cabinet. In addition, a stable, deformation-resistant monolithic structure combined with a high pressing force of 63 tonnes ensures the highest accuracy and precision in machining. All this makes the PMS 63 CP press the ideal choice for both small batch and high volume production. The offer includes additional equipment, consisting of among others 8 anti-vibration pads and an intermediate table. Technical specifications of the PLASOMAT PMS 63 CP press - maximum press force: 63 t (630 kN) - work table dimensions (L x W): 800 x 560 mm - number of slider strokes: 65-85/min - maximum slider stroke: 110 mm - minimum slider stroke: 8 mm - slider adjustment: ...

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 11,000/3000/H1100 mm -Load capacity: 100 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel Size: 646/200-480 -Quantity: 4 pieces of heavy-duty transport trolleys available -Price: piece -Total dimensions: 12,300/3000/H1100 mm -Weight: 12960 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 6000/2500/H700 mm -Load capacity: 40 tons -Steering: double -Drawbar length: 1180 mm -Drawbar eye: Ø 40 mm -Wheels number: 16 pieces -Wheel Size: 425/150-305 -Quantity: 1 piece of heavy-duty transport trolley available -Price: piece -Total dimensions: 7140/2500/H700 mm -Weight: 3560kg

Planax Perfect Binding Desk With a terminal block Working width up to 46 cm Stack height up to 16 cm Glue / produce blocks / tear-off blocks yourself Planax adhesive binding device With one clamping bar Working width up to 46 cm Stack height up to 16 cm Glue / produce blocks / tear-off blocks by your self

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 11,000/3000/H1100 mm -Load capacity: 100 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel Size: 646/200-480 -Total dimensions: 12,300/3000/H1100 mm -Weight: 12960 kg

Meca Plastic traysealer, type: MECA 2003 MF, number: 5493, year of construction: 09.03, chain infeed conveyor with dividers, chain width: 450 mm, distance between dividers: 390 mm, outfeed roller conveyor, plastic rollers, roller width: 970 mm, total dimensions: 4100 mm x 1000 mm x 2000 mm. Including pallet with extra dyes, dyes: 300 mm x 250 mm, (2x) 250 mm x 140 mm, (4x) 140 mm x 120 mm and 320 mm x 260 mm.

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

Precast Modular House Machine, Low Cost Precast Concrete House ERICH PETER MACHINES-PLANTS GMBH deals with complete solutions for the implementation of construction projects according to EU standards. We are not a construction company, but give the required knowledge in theory and practice to plan, calculate and implement construction projects. Business offers: ? Creation of necessary business, master and execution plans ? Sales of needed machines and plants for building material production ? Precast plant supply (new or refurbished) ? Plant commissioning and personnel training ? Concept & design for precast concrete projects as well as for multi-story wood structure buildings 5 key arguments: ? High speed buildings with short realisation time very important in all markets. ? High quality mainly in precast realised (minimized human failure) ? Low c ...

LOCATELLI-DISHMATIK- bowl/dish lathe does bowls and face plate work (5) hydraulic tracing stations They make multiple passes on all three axis with varying depth drops vacuum chucking complete with (1) Levigatrice pedestal sanders and vacuum pump condition (as new)less than 80 hours on lathe (new cost was ($123,000+)…..Price-$27,000

Planmed mammography device Nuance Excel - digital with the following device components: Tube M113 A Varian 0,1/0,3 1x Detector Flex AEC Radiation protection wall + 2. Device with tube and detector as spare parts dispenser • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authoriz ...

specifications: - maximum grinding length 360 mm - maximum grinding width 155 mm - maximum installation height 280 mm - Grinding wheel stroke approx. 240mm - Clamping area 400 x 160 mm - Magnetic clamping plate 300 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - Wet loop fitting - Drive 400 V / 3 kW - Space required approx. W 850 x H 1700 x D 950 mm - Weight approx. 550 kg

T-slotted Floor Plates Number of T-slots: 5 T slot size: 28mm Total dimensions LxWxH: 3900x1600x400mm Weight: 4.300 kg

Traysealer from the manufacturer MECA PLASTIC, model 1500. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Measures of the last of the tray to be sealed 165 mm x 265 mm x 70mm x 2 units, minutes for film reels of width 435mm. Total machine size 900 mm x 600 mm x 1560 mm high. The MECA PALSTIC tray seamer has been designed to package food products with a modified atmosphere, in industrial environments. Low investment, multiplicity of uses and flexibility explain the popularity of the mod.1500. With this you can close trays of different materials and sizes at high speed. Like all MECA PLASTIC packaging machines, it offers speed, reliability, quality and excellent performance, as well as easy maintenance. The mold can be changed in a few minutes and the machine is very easy to clean. For the results achieved and its  ...

Air compressor Planet Air L 550 with dryer KT 700; good condition; 550L/min.; 10 bar; incl. air dryer KT 700. Compressor Plant AIr AL 550; good condition; volume 550L/min.; 10 bar; with air dryer.