129,264 used machines on RESALE, but how to find them? Machine Search
Injection moulding machine Arburg 470C 2000-675 BJ 2007
Injection moulding machine Krauss Maffei KM 300-1900 C2 BJ 2000
Injection moulding machine Arburg 420S 1300-350 BJ 2000 without handling
Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers
Injection moulding machine Demag erg. 250/560 840 BJ 2001
Injection Molding Nose Demag ergotech 50/370-200 BJ 2000
Injection moulding machine Engel victory 200H/200V790 comb BJ 2018
Ideal for operating a business where power outages are not desired, for example injection molding R1334 Power Generator Emergency Power Generator POLYMA/DEUTZ 80 KVA installed in a truck trailer single-axle, was used on construction sites. Dirty outside by leaves and dirt Polyma Kassel 80KVA = 16A = 64 KW,Diesel engine Deutz type F6L912 7ßKW 95hp 2000 rpm., With diesel hand pump hose in canister and pump,With cable/plug 63 A, The trailer is not soundproofed, stood outdoors for years under canopy and is accordingly polluted More detailed pictures on request
injection molding machine Angel Type: Victory 330/80 Tech Machine No: 155871 Age : 2005
Injection moulding machine Krauss Maffei KM 200-1400 C2 BJ 2000
Key data: 20000 kN
Angebot/Offer: Engel Duo 17060/2000 Viper Robot 60 approx. 4900h YOC 2021
URBAN AMS 6010 very good condition fully operational
Key data: 6500 kN, 105 mm
Location is : Latino America !
Key data: 1500 kN, 415 g/PS, 55 mm
Built in 1999 Clamping force: 150 tons. Screw diameter: 55 mm Displacement: 456 cm³ Spray pressure: 1564 bar Very good condition!
Year: 2006 - technically efficient, ready to work – after full service - possibility of mounting 3 milling heads - top and bottom chiseling - control via PLC - automatic machining process
Year: 2000 - technically efficient, ready to work – after full service - 4 heads - support arms
Key data: 4000 kN, 763 g/PS, 60 mm
Year of Make: 2000 Clamping force: 400 tons. Shot volume: 848 cm³ Screw diameter 60 mm Injection pressure increased: 2,421 bar Good condition, immediately available
Key data: 450 kN, 80 g/PS, 30 mm
Year of Make: 2001 Clamping force: 45 tons. shot volume: 99 cm³ shot weight: 80 gr./PS Screw diameter: 30 mm good condition
Key data: 250 kN, 29 g/PS, 22 mm
Year of Make: 2005 Clamping force: 25 tons. Capacity: 38 cm³ Screw diameter: 22 mm Good condition
Key data: 500 kN, 95 g/PS, 30 mm
Year of Make: 2005 Clamping force: 50 tons. shot volume: 106 cm³ shot weight: 95 gr./PS Screw diameter: 30 mm with take off robot Good condition
3 x Ferromatik injection moulding machines Ferromatik K155, built in 1999 Ferromatik K275S, built in 2000 Ferromatik K200, built in 2000
Engel injection moulding machine ES 1350 / 275 HL built in 2000 for sale.
Year: 2007 - technically efficient, ready to work – after full service - disc cutter: 250 mm - 4 CNC axes - working height: 200 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/outfeed table
TECHNICAL DATA OF THE MACHINE General Clamping force: 50 t Year of manufacture: 2006 Control: NC4 Weight: 2,700 kg Dimensions (L × W × H): 3.8 × 1.1 × 2.1 m Injection unit – .../200 Screw diameter: 22 mm Injection volume: 41.8 cc Specific injection pressure: 2,800 bar Closing system – 50/... Clamping force: 50 t Tool plate dimensions: 520 × 520 mm Clearance between columns: 355 × 355 mm Tool height: 210 mm Opening Distance: 400mm Maximum Plate Distance: 610mm
Injection Molding Machine Specifications 1. Main Machine Parameters Clamping force: 25 t Tool clamping system: 25 / ... Tool plate dimensions: 400 × 400 mm Clearance between columns: 220 × 220 mm Maximum Plate Distance: 425mm Ejector stroke: 95 mm Ejector force: 18 kN Year of manufacture: 2001 Weight: 2000 kg Dimensions (L × W × H): 2.9 × 0.9 × 1.9 m 2. Injection Unit Injection Unit: ... / 60 Screw diameter: 18 mm Injection volume: 20cc Injection weight: 18 g Specific injection pressure: 2500 bar Screw L/D ratio: 24.5 3. Controls Control System: Selogica
Year: 2006 - technically efficient, ready to work – after full service - 2 pneumatic motors (top + bottom) - disc cutter: 250 mm - 2 CNC axes - working height: 140 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/Outfeed table
used screening machine, function-tested, immediately available
A Cyklop strapping machine is being sold. Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Price is net Loading facilities available All information without guarantee
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 3500t of clamping force and the relocation of industrial plants throughout Europe. Offered: Krauss Maffei 125-520 C2 injection moulding machine Machine Specifications General information Year of manufacture: 2004 Controls: MC4 Weight: 6000kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m Clamping force: 125 t Tool Clamping System: 125 / ... Tool plate dimensions: 745 × 770 mm Ground clearance between columns: 470 × 470 mm Tool height: 300 mm Opening Distance: 600mm Maximum Plate Distance: 900mm Ejector force: 22 kN Ejector stroke: 150 mm Injection Unit: ... / 520 Screw diameter: 45 mm Injection volume: 275cc Injection weight: 250 g Specific Injection Pressure: 1878 bar ...
Key data: 2000 kN
Clamping unit very well preserved, see pictures, also fits 570A as a spare part
Year: 2009 - technically efficient, ready to work – after full service - discs: 500 mm - working length: 3700 mm - PC control (Windows XP) - online access - vertical and horizontal pneumatic clamps - automatic disc guards - roller feeder - support for longer profiles
3 x Injection moulding machines Stork 440 to 1 x Injection moulding machine Stork 660 to 2 x Injection moulding machine Stork 900 to
Key data: 3000 kN, 679 g/PS, 60 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900C2 Year of Make: 2005 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 754 cm³ Moulded part weight: 679 g/hp Control: MC5 Equipment: 2 pcs core train Interface Robot Cavity pressure measurement 24-fold hot zone channel control Interface temperature control unit Approx. 76,000 operating hours
Key data: 3000 kN
1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900CX Year of Make: 2011 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Maximum displacement: 769 cm³ Moulded part weight: 692 g/hp Control: MC6 Equipment: 3 pcs. core train Interface Robot 45-fold hot zone channel control Interface temperature control unit Approx. 51,000 operating hours
Key data: 5000 kN, 2 g/PS, 90 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900CX Year of Make: 2011 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Maximum displacement: 769 cm³ Moulded part weight: 692 g/hp Control: MC6 Equipment: 3 pcs. core train Djbr Rvoxyrc Isf Nysul Interface Robot 45-fold hot zone channel control Interface temperature control unit Approx. 51,000 operating hours
Key data: 2500 kN, 579 g/PS, 60 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET250-840 Concept Year of Make: 2004 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 636 cm³ Moulded part weight: 579 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W633-931 2 pcs core train
Key data: 600 kN, 94 g/PS, 30 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET60-200 Concept Year of Make: 2003 Clamping force: 60 tons Spar spacing 420 x 420 mm Screws DN: 30 mm Max. displacement: 106 cm³ Moulded part weight: 94 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W621-1381 2 pcs core train
Key data: 4200 kN, 2 g/PS, 80 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM420-4300CX Year of Make: 2012 Clamping force: 420 tons Spar spacing 800 x 800 mm Screws DN: 80 mm Max. displacement: 1,810 cm³ Moulded part weight: 1,647 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit
Key data: 2500 kN, 476 g/PS, 55 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM250-1000CX Year of Make: 2017 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 55 mm Max. displacement: 523 cm³ Moulded part weight: 476 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit
Year: 2018 technically efficient, ready to work – after full service hydropneumatic head feed with automatic profile height measurement automatic zeroing after the end of the work cycle double vertical and horizontal pneumatic clamps minimum internal pack dimension: 450 mm maximum internal pack dimension: 2740 mm
technically efficient, ready to work - after full service bar spacing: 100 mm dimensions: 265 x 265 cm height: 150 cm weight: 350 kg
Key data: 2000 kN, 291 g/PS, 45 mm
1.0 St. gebr. Rotary Table Injection Molding Machine Manufacturer: ARBURG Type: 1500T2000-800 Year of Make: 2012 Clamping force: 200 tons Rotary table; 2 x 180° Screws DN: 45 mm Max. displacement: 313 cm³ Moulded part weight: 291 g/hp Control: SELGOCIA Equipment: 1 x Core Pulls
Key data: 1500 kN, 45 mm
Stork S+S1500-850 Year of Make: 2011 Clamping force: 150 tons. Screw diameter: 45 mm Max opening distance: 480 mm Injection pressure: 2100 bar used for PP thin-wall packaging
Key data: 3300 kN, 62 mm
Stork S+3300-2150 Year of Make: 2008 Clamping force: 330 tons Screw diameter: 62 mm Max. opening distance: 620 mm Injection pressure: 2100 bar Material: PP
Injection moulding machine Battenfeld Machine Type TM 2700/2800 Control Type B2 Year of construction 2003/04 Screw diameter 75 mm
Injection moulding machine Krauss Maffei KM 800-5700 BJ 1999 Technical data on request
Injection molding machine Krauss Maffei CX 650-3000 BJ 2009
This Netstal EVOS 5500-2900 Speed was manufactured in 2013. Ideal for high-speed plastic processing, it ensures efficient operations with minimal downtime. A robust choice for your production needs. Contact us for more information.
For plastic tubes (HDPL, LLDPL) Hot air sealing 9 tube holder stations Output max. 40 tubes/min For tube diam. 9-50 mm depending on tube holder format set Tube height 60-240 mm Dosing 20-220 ml depending on dosing pump 1 rotary valve dosing pump 10-100 ml (1 additional as spare) Tube feed magazine Filling funnel with agitator, heatable with heating/cooling device Print mark control (alignment of the tube to the print image) Embossing 1 line 2 tube holder format sets: tube diam. 25 mm, tube length 90 mm, tube diam. 35, tube length 165 mm PLC Siemens S7-300 Connection 400V/50Hz Has worked in line with upstream tube labelling machine 05-0179
maximum number of results exceeded
please refine your search
