128,657 used machines on RESALE, but how to find them? Machine Search
equipped with Torit extraction Auction-ID: A1-45793-11
Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC70 Maximum cutting thickness: max. cutting thickness 20 mm Connection: 380 volts adjustable current: 20A - 60A Start: scratch-start duty cycle: 60% duty cycle (60A) Technology: IGBT Technology Protection: circuit breaker Including: plasma torch, accessories and protective cover Not included: 380 volt plug Condition: Unused and in the original packaging
Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC130 Maximum cutting thickness: max. cutting thickness 45 mm Connection: 380 volts adjustable current: 30-120 A Start: Equipped with: Pilot Arc duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: Plug for CNC control Including: plasma torch, accessories and protective cover Not included: power cable and 380 volt plug Condition: Unused and in the original packaging
The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...
CNC plasma cutting system working range: 1500 x 3000mm OTC Superplasma 12000 Cutting up to 20mm quality cutting New control ProDNC from Micompan data transfer via USB; ready to use
Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.
Plasma cutting system with Hypertherm HPR 130 with automatic gas console Cutting up to 20mm Working range: 1500mm x 3000mm inlusive filter system Immediately available under current assembly and commissioning on request
Plasma extraction and filter system Filter BLOC TFK PL Series special central suction and filter unit for plasma smoke when burning and cutting the FILTER BLOC TFK PL series and CQC certified manufacturer according to ISO 15012 and CE drawing FILTER BLOCK - TFK PLASMA 40/60/80 Motor power 5,5 / 7,5 / 11 KW air volume 4000/5500/6200 m3 / h 124/186/248 m2 filter surface dust container 4x/6x/8x 84 liters Automatic jet cleaning system with testing for welding fume category W3 24 Months Warranty The price refers to the TFK PL 40 for further information on request; ready to use
Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-3015-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1200.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syste ...
Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-4020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 4100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 4650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1950.0 kg - Maximum load: 4000.0 kg - Adjustable support legs: 8 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syste ...
Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-6020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2700.0 kg - Maximum load: 7000.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syst ...
• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table
Plasma hose package -Hose package: water-cooled -Length: 10.5 m -Weight: 5.7 kg
Plasma hose package, welding torch, MIG/MAG torch -ESAB type: PSF 410 Cw -Hose package: water-cooled -Spring contact -Length: 3.25 m -Price: per piece -Number: 2 pieces -Weight: 3.2 kg
Plasma hose package -Hose package: water-cooled -Handle: damaged -Length: 10 m -Weight: 6 kg
cutting range for steel to: 76 mm capacity at 100%: 51 mm cutting medium: 400 Amp regulated drive: 50-150 und 100 - 400 AmpSteuerSteuer control voltage: 24 Volt weight of the machine ca.: 750 kg dimensions of the machine ca.: 82 x 122 x 930 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Plasma cutting "CR" 6000x2500 with two Hyperterm HT 2000 and HD 3070 generators complete with filter
Flame cutting machine, plasma torch -Designation: Plasma Electrode Hypertherm 043 020415 -Diameter: 13mm -Length: 41mm -Number: 1 piece available -Total weight: 0.05kg
Flame cutting machine, plasma torch -Designation: Plasma Electrode Hypertherm 043 020415 -Diameter: 13mm -Length: 41mm -Number: 1 piece available -Total weight: 0.05kg
Flame cutting machine, plasma torch - Designation: plasma electrode Hypertherm 402 120667 -Max. Load: 200 A -Diameter: 13mm -Length: 41mm -Number: 9 pieces available -Price: complete -Total weight: 0.45kg
Flame cutting machine, plasma torch - Designation: plasma electrode Hypertherm 402 120667 -Max. Load: 200 A -Diameter: 13mm -Length: 41mm -Number: 9 pieces available -Price: complete -Total weight: 0.45kg
Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 120182 plasma nozzle -for: Hypertherm HT2000 -Number: 2 available -Price: complete -Total weight: 0.2kg
Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 020608 plasma nozzle -for: Hypertherm HT2000 -Number: 1 piece available -Total weight: 0.1kg
Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: diffuser Hypertherm 020607 -for: Hypertherm HT2000 -Number: 2 available -Price: complete -Total weight: 0.1kg
Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 020448 plasma nozzle -for: Hypertherm HT2000 -Number: 4 available -Price: complete -Total weight: 0.2kg
Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/009 -Length: 7.0 m -Transport dimensions: Ø 570 x 170 mm -Weight: 10 kg
CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of construction: 2008 Retrofit: 2019 Suction table: 2,000 x 3,000 mm 1 oxy-fuel burner ALFA 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC
Offer up to 2 plasma power supplies here. Technical data, as shown in the picture.
Plasma Cutter VCS 2000, HiPerformance Plasma HPR 260 XD and suction Filtercube 4H 7500 m³/h volume flow. To be visited in operation.
Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...
For more specifications, see PDF. Auction-ID: A7-45828-2
plate thickness:15 mm total power requirement:13 A 9 KVA weight of the machine ca.:50 kg dimensions of the machine ca.:1000 x 400 x 650 mm
cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm
2015, machines have been put away working and have had annual inspections
WARCOM plasma - Cutting measures 2500x6000 - Equipped with protections - Suction system
2017, machines have been put away working and have had annual inspections
Compressed Air Plasma Cutting Machine Maximum cutting thickness: 1-40 mm Current: 20-120 Amps Voltage: 310V Single-tube, full-bridge inverter technology, with sufficient output current for high-intensity operations, precisely preset cutting current + adjustable gas delay.
For more specifications, see PDF.
2017, machines have been put away working and have had annual inspections
Compressed Air Plasma Cutting Machine Maximum cutting thickness: 1-40 mm Current: 20-120 Amps Voltage: 310V Single-tube, full-bridge inverter technology, with sufficient output current for high-intensity operations, precisely preset cutting current + adjustable gas delay.
2015, machines have been put away working and have had annual inspections
Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095
ESAB ESP-150 plasma cutting machine. 150A industrial plasma cutter. 3-phase connection 380/400/415V. Includes torch and cables. Fan cooling. Machine weight approx. 360 kg. Coming from a business environment.
Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095
maximum number of results exceeded
please refine your search
1 € 
