plasma cutting used for sale

cutting machine 2007 width 115 cm with monitor touchscreen USB interfaces CIP3 + CIP4 compatible ethernet interface Saddle Positioning via Joystick ergonomically arranged Two-Hand Operation press beam stop function programmable pressing force automatic pressing safety light grid plexiglass protection on the rear table stainless steel tablework surface air table side air table in production available: immediately located: Germany

Year of construction 2006 Rotor width: 600 mm Drive motor: 50 kW Rotor has been overhauled, blades have been replaced with spare knife + spare sieves without control cabinet, the machine was connected to a central control cabinet

A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Paper cutting machine with 39cm cutting width. cleaned and checked

Jac Bread Gate Bread cutter 9mm cutting thickness speedswitch with protective cover front and back Emergency stop switch 380V 50Hz on casters Height: 130cm Width: 60cm Depth: 60cm

Used bread slicer TREIF, type: Pegasus 2600 -In good bakery condition- - Cut through sickle knife, no creel - Includes new replacement blade - Cutting widths from 4 to 14 mm possible -El. Connection: 400 / 230 V, 50 Hz, 2.25 / 10 A, 0.9 kW - Weight: 168 kg - Condition: Very good, ready to use Inspection and test run possible. Video available.

- Color display - Program - Air table - Resopal side table left+right - Jogging table with air - Spare knife

Treif Discus Circular Knife Machine Type: Discus 400 digital control Circular knife Cutting width adjustable from 4mm to 18mm 400V 50Hz Stainless steel cladding Weight approx. 200 kg Operating voltage 400 volts Control voltage 24V/DC V AC Nominal power 0.9 kW Circular knife with Teflon coating Height: 110cm Width: 80cm Depth: 70cm

KIMLA POWERCUT LF1020 fiber laser was built in 2022 in Poland by POLCOM Przemysław Kimla. The machine has worked for a total of 814 hours and is in very good condition. Laser cutting is performed by means of a stable 2 kW fibre beam, which is generated by a resonator of the highest energy efficiency. A focusing lens system inside the cutting head ensures optimum beam geometry for various types of workpieces. As a result, the edges of the machined workpieces are distinguished by their unprecedented smoothness and absence of irregularities. The entire machining process is fully automatic, thanks to the use of an automatic pallet exchange system. This system enables simultaneous loading and unloading of workpieces during cutting, thus increasing production efficiency and reducing machine downtime to a minimum. The POWERCUT LF1020 fibre laser is offered with an extensive range of equi ...

Key data: 300 mm, 200 mm, 200 mm

Specifications: Manufacturer: Sodick Type: AQ 300 L (5 axles) Year of Make: 2005 Control: Sodick LN1W Travel distances X, Y, Z: X 300 mm, Y 200 mm, Z 200 mm Travel distances U, V: U 80 mm, V 80 mm Workbench Dimensions: 750 x 500 mm Max. workpiece height: 200 mm/180 mm Max. table load: 300 kg Dimensions and weight Dimensions L/W/H: 2,400 x 1,300 x 2,210 mm Weight: 2,700 kg Condition Condition: Used Functional: Tested and fully functional The machine is in very neat condition.

Tip height: 355 mm Center width: 3000 mm large circulation Ø over bed/recess/bed slide: 715/790/520 mm Spindle bore: 86 mm Spindle holder according to DIN 55027: Gr. 11 Tailstock quill taper: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/flat: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitwort Thread: 2 - 28 Gg 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 Diametrical Pitch Threads: 8 - 112 DP Drive motor, pole-switchable: 380 V, 7/11 kW Weight approx.: 7 t Approx. space requirement: 6000 x 2300 mm

Used HydReclaim Film Recycling System Manufacturer: AEC inc. USA Model 812 Electricity: 400 VAC, 50-60 Hz, 3-phase AEC Hydreclaim fluff weigh system Model 50 cubic foot

Wire EDM Machine Charmilles Robofil 4030 SI BJ 2001

WJS NCH 30 B CNC waterjet cutting machine was built in 2017 in Sweden by Water Jet Sweden AB. The machine, equipped with two cutting heads, is used for machining a wide range of materials, i.e. metal, plastics and glass. The machining process is performed with innovative water jet cutting technology, which guarantees perfectly smooth edges without the need for further secondary processes. Only natural abrasive and water are used during cutting, making the process free of harmful fumes and safe for the environment. The NCH 30B WaterJet is offered with extensive equipment, including a 50 HP high-pressure pump and an advanced FANUC CNC control. Over its entire service life, the machine has worked a total of 4866 hours. Technical specifications of the WJS NCH 30 B water cutting machine - feed in the X/Y/Z axis: 3010/1510/250 mm - feed rate in the X/Y/Z axis: 12000/12000/5000 mm/min  ...

Cutting heads: 2, cutting head type: AWJ 2D, abrasive feed: system SM4000, pump type: KMT Streamline SL-VI Standard, max. pump pressure: 3800bar. Table dimensions X/Y: 3200mm/1710mm, cutting dimensions X/Y: 3010mm/1510mm, travel range X/Y/Z: 3010mm/1510mm/250mm, travel speed: 12m/min, cutting head distance range: 90mm-450mm, positioning accuracy: +/-0.075mm, repeatability: +/-0.035mm, control: Fanuc 0i-MF, operating hours: 4866h. Includes oil cooler, water treatment, and safety zone. Documentation available. On-site inspection possible.

Bread slicer Treif Primus 400 Treif Primus 400 "The Premium Model" Circular Knife Machine Stainless steel version Knives newly sharpened and coated Best cut for your bread Operation via easy one rotary control Disc thickness adjustable from 4 - 24 mm Dimensions: 800 x 700 x 1050 mm, WxDxH Robust technology Connection 230V, ready to plug in Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience!

MITSUBISHI ML3015eX PLUS laser cutting machine was built in 2019 in Japan by MITSUBISHI ELECTRIC CORPORATION. The machine, distinguished by the use of the most advanced technology available on the market, is an excellent choice for precision cutting of sheet metal made of, among others, steel, aluminium and copper. Workpieces with a maximum length of 3050 mm and a width of 1565 mm are machined by means of a reliable head with auto focus, which is powered by a 4.5 kW laser beam. The laser beam is generated by electrical discharges in a special gas mixture with a relatively slow flow and in a direction perpendicular to its axis. Real-time power monitoring, combined with a constant beam length, ensures the highest cutting quality over the entire work area and prevents power deviations of more than ± 1%, which are necessary for machining highly reflective materials. The entire machining  ...

EDM machine Makino DUO64 vintage 2011.

Laser cutting machine Trumpf Trulaser 3030

Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, 1xreserve knife

Manufacturer: PEAFFER Model: P160 H/I Power: 8 HP Voltage: 380 V Phase: 3 Frequency: 50 Hz Find more here - / Contact us at -

Inv. Num. : 8767 Type: Trumatic L3030 Producer: Trumpf Created: 2007, GO 2023 Parameters: Hours: 6099 h Switch-on hours: 12949 h Laser power: 3200 W Work table length: 3000 mm Work table width: 1500 mm

A Bystronic CNC laser cutting system is available. Laser type: ByLaser 4400, laser power: 4400W, wavelength: 10.7µm, working dimensions X/Y: 3000mm/1500mm, cutting dimensions X/Y/Z: 3000mm/1500mm/170mm, positioning speed: 80m/min, simultaneous positioning speed: 113m/min, acceleration: 4.5m/s², positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. workpiece weight: 890kg, max. sheet thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm. Machine dimensions X/Y/Z: approx. 12900mm/6100mm/2100mm, weight: approx. 13500kg, laser hours: 58157h, blower hours: 93930h, pump hours: 10398h. Includes water cooling unit, without extraction. The control was completely renewed in 2025. Documentation available. An on-site inspection is possible.

cutting machine 1995 cutting width: 920 mm ED operator panel with graphic display programmable light barrier air table on stock available: immediately location: Germany

Product Features: The K65 series is a high-speed laser tube cutting machine designed specifically for processing small and medium-sized tubes. Its development and design focus on addressing industry pain points such as low cutting efficiency, significant waste, and unstable cutting accuracy. It features high speed, efficiency, precision, and minimal waste. It can efficiently process a variety of tubes, including square and round tubes, with diameters ranging from 8mm to 120mm. It is widely used in industries such as vehicle frames, metal furniture, display cases and shelving, fitness equipment, automotive parts, and medical devices.

Inv. Num. : 8771 Type: TruLaser 5030 Fiber Producer: Trumpf Created: 2012, GO 2024 Parameters: Hours: 32072 h Switch-on hours: 45208 h Laser power: 3 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 20 mm Maximum sheet thickness when cutting (aluminium): 8 mm Maximum sheet metal cutting thickness (copper/brass): 6 mm Feed length Z-axis: 150 mm Equipment: Liftmaster Compact

Inv. Num. : 8772 Type: TruLaser 3030 L20 Producer: Trumpf Created: 2012, GO 2024 Parameters: Hours: 35157 h Switch-on hours: 55771 h Laser power: 3.2 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 20 mm Maximum sheet thickness when cutting (aluminium): 8 mm Feed length Z-axis: 150 mm

Control: FANUC Travel distance: X= 500, Y= 350 Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg

Cutting table SEEWER RONOD, type: SFT 362, A23 -refurbished- - Cutting table for pastries - Cutting section - with some cutting blades and cutting rollers -Reel More information on request. Visits and test runs are possible by arrangement.

Manufacturer: Optimum Year of construction: 2024 Condition: as good as new, workshop tested Delivery time: immediately available Specifications Tip height: 165 mm Center width: 830 mm Circumferential diameter over bed: 330 mm Circumferential diameter over face slide: 208 mm Swivel length in the bed bridge: 430 mm Speed ranges: 16 steps, 70–2000 rpm⁻¹ Drive motor: 1.5 kW, 400 V, 50 Hz Spindle holder: Camlock DIN ISO 702-2 No.4 Spindle bore: 38 mm Spindle cone: MK5 Tailstock mount: MK3, quill stroke 110 mm Weight: approx. 512 kg Machine dimensions (LxWxH): 1685 × 745 × 1590 mm Gradients and feed Metric: 0.4-7 mm/rev (26 pitches) Inches: 56-4 Gg/1" (34 pitches) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Face feed: 0.014–0.38 mm/rev (32 feeds) Accessories: Fixed bezel (Ø 6–50 mm) Rotating bezel (Ø 8–3 ...

Offer 25300 Specifications: - Manual band sawing machine - Saw blade dimensions 2750 x 27.0 x 0.9 mm - Cutting speeds infinitely variable N 15 / 90 m/min - Max. clamping possibility 355 mm - Mitre adjustable li + re up to 30 ° - Cutting range - 90° round 255 mm - Square 190 mm - flat 310 x 190 mm - 45° li + re round 215 mm - Drive 400 V / 1.5 kW - Coolant device - Weight approx. 350 kg - Space requirement approx. W 700 x H 1600 x D 1700 mm

Multi-bar cutting machine type Schilt FLEXBAR 300 AE & cutting / shears SE 300 Active rack for rebar with 1 or up to 6 levels, Electrically driven infeed conveyor with coated rollers Hydr. Reinforcement cutting machine with 150 mm or 300 mm saw blade width the warehouse holds 14 m of reinforcing bars 12 m conveyor belt with volcano rollers Capacity of the system: at 8 mm diameter - 30 rods in one operation at 14 mm diameter - 18 rods in one operation at 28 mm diameter - 7 rods in one operation at 50 mm diameter - 2 rods in one operation

Key data: 3000 , 1500 , 3000

1. Employs world-leading fiber lasers with a fixed optical path design, eliminating optical path maintenance, reducing operating costs, and ensuring high cutting quality and processing efficiency. 2. The machine tool adopts a gantry structure with a rack and pinion dual servo drive structure, achieving a maximum acceleration of 0.8G, ensuring high-speed and high-precision operation. 3. Stable optical path and control systems that are simple to learn and operate. 4.Uses top-brand fiber lasers, resulting in excellent beam quality, stable output power, and precise cutting.

Offer 25432 Specifications: - Turning diameter 320 mm - Center width 750 mm - Largest turn – Ø over bed 550 mm - via flat slide 175 mm - Spindle bore 32 mm - Spindle holder - Pick-up cone of the tailstock quill MK 3 - Quill stroke 180 mm - 18 spindle speeds 85 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches -Thread - Module thread - Diametrical Pitsch thread -Arbor - Cheek chuck -Lunette - Drive 400 V / 2.2 kW - Space requirement approx. W 2100 x D 750 x H 1300 mm - Weight approx. 750 kg

Weiler Commodor – lead and pull spindle lathe (partially overhauled, built approx. 1990) Condition: Partially overhauled, very good general condition Year of construction: approx. 1990 Manufacturer: Weiler Model No.: Commodor Machine Type: Lead and Pull Spindle Lathe Technical data (approx. information): Max. turning diameter over bed: 380 mm Max. turning diameter over support: 190 mm Max. turning length: 1000 mm Bar Passage: 56 mm Speed range: 25 – 2000 rpm Spindle Nose: A2-6 Drive power: 4.0 kW Tailstock: MK4 Automatic longitudinal and flat feeds: 0.011 – 0.80 mm/rev Thread ranges: Metric: 0.3 – 10 mm Inch: 80 – 2 3/4 G/" Diametrically Pitch: 80 – 5.5 Dp Module: 0.2 – 5 Dimensions (L x W x H): 2200 × 1200 × 1800 mm Weight: approx. 1500 kg ⚙️ Equipment & Accessories: 3-Axis Digital Display SINO (New)  ...

Bread slicer MHS Compact Circular knife machine mobile Knives newly sharpened and coated Manual operation via membrane keypad simple, robust technology Dimensions: 600 x 730 x 1200 mm, WxDxH only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Spare blade Maintenance contract Delivery Service Package E-Box Instruction & Commissioning

Bread slicer MHS creel BM 45 N Creel cutting machine floor model Cutting thickness 10 mm Automatic Controls with crumb drawer at the bottom Stainless steel version, knife lubrication with original Teflon special knife Machine mobile with brake only DGUV V3 tested by us Connection 400V, 16A-CEE plug Dimensions: 600 x 750 x 1100 mm, WxDxH Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Leasing & Rental Service Maintenance contract Delivery Instruction & Commissioning

Bread slicer MHS Compact Circular knife machine mobile Knives newly sharpened and coated Manual operation via membrane keypad simple, robust technology Dimensions: 600 x 730 x 1200 mm, WxDxH only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Spare blade Maintenance contract Delivery Service Package E-Box Instruction & Commissioning

Laser Center of Lasag AG TYPE: FLS 542 C Year of Make: 2006 There are 2 systems each for the laser center (2x optics, 2x laser source) There are also the fiber optic cables and the transformer blocks for the laser sources as well as a PC control system. The plant was dismantled and stored in full working order at the end of 2024.

- Brand: Mayper - Model: MAPC 3280 - Cutting chamber: 830 x 320 mm - Open rotor - Slanted cut - Engine: 40 hp (30 kw) - 3 HP (2.2 kw) vacuum cleaner -Electric motor

The machine is in good technical condition, testing is possible after prior agreement. Machine on - 92331 h

Max. size= 92 x 92 cm, Availability= 112025, Working width 920mm Stack height 120mm Programmer unit Central air table Side tables with air Chrome table surface anti rust Photocells CE Hydraulic drive of the pressure beam with fully adjustable force Spare knife, operating tools Weight app. 1700 kg 380V power supply LOT Loaded in truck or container

table length: . mm table width: . mm burner heads: . : 2 total power requirement: . kW weight of the machine ca.: 1478 KG dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TOS Galanta SUIL 40A – Lead and Pull Spindle Lathe For sale is a well-preserved and mechanically overhauled 2009 TOS Galanta SUIL 40A lead and pull spindle lathe, built in 1998. Specifications Manufacturer: TOS Model: Galanta SUIL 40A Machine number: 0219 Year of manufacture: 1998 (mechanically overhauled 2009) Dimensions: approx. 2.2 m × 1.1 m × 1.75 m Weight: 1620 kg Main drive: 5.5 kW Spindle speed (max.): 3150 rpm Spindle bore: 50.2 mm Center spacing: 1000 mm Center height: 200 mm Turning diameter over bed: 400 mm Condition: ready for use (used) Accessories Three-jaw chuck Tailstock Lunette Coolant Setup Interchangeable Wheel Set Operating instructions (German) The machine is fully functional. Viewing possible by appointment

A used cutting machine Polar 92 EM Air table Side Tables Program

For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately.

A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible.

Laser power: 2000W, wavelength: 10.6µm, working dimensions X/Y/Z: 3000mm/1500mm/75mm, max. material thickness mild steel/stainless steel/aluminum: 15mm/6mm/5mm, max. table load: 550kg, travel speed: 60m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm. Machine dimensions X/Y/Z: approx. 7400mm/3300mm/2300mm, weight: approx. 8900kg. Documentation available. An on-site inspection is possible.

A CNC laser cutting system Bystronic is available. Laser power: 2200W, max. sheet dimensions X/Y: 3000mm/1500mm, travel path X/Y/Z: 1562mm/772mm/100mm, max. material thickness mild steel/stainless steel/aluminium: 8mm/6mm/4mm, positioning accuracy: +/-0.1mm, simultaneous speed: 140m/min, load capacity loading table/cutting table: 300kg/80kg. Machine dimensions X/Y/Z: approx. 6250mm/6000mm/2150mm, laser source dimensions X/Y/Z: approx. 1900mm/950mm/1250mm, weight: approx. 13500kg. Including combined cooling and filtration unit WKL 300-F. Dokumentation vorhanden. An on-site inspection is possible.

A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible. Expected to be available from the end of January.