plasma cutting used for sale

Abstanz- und Einkerbmaschine / Cutting and Notching machine Schmedt PräCut 65 Baujahr / Year 1997 - Serial-No. 79 Book block height: up to 350 mm Book block thickness: up to 90 mm Air supply: 10 bar Power supply: 400 V / 50 Hz / 1,6 kW (three-phase) Output: approx. 250 - 350 pcs / hour Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Cutting machine DSN 700 from the manufacturer DÖINGHAUS Voltage: 3 x 400 V, 50 Hz Power: 2 kW Machine dimensions (LxWxH): 160 x 140 x 170 cm Weight: 550 kg Condition: well-kept, in working order Availability: as of now

Workspace Center width 1000 mm Turning diameter over bed 356 mm Circulating Ø over support 220 mm Bed width 206 mm Travel X-axis travel 178 mm Travel Z1 axis 92 mm Bsncqtycvju Swivel range upper slide ± 50° Main spindle Speed range, High 550 1/min - 3000 1/min Speed range, Low 30 1/min - 550 1/min Spindle mount Camlock D1-4 Spindle bore 38 mm Spindle Taper 5 MK Feed Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Tapping Tapping, Metric (37) 0.4-7 mm Tapping Whitworth (28) 4-56 TPI Tailstock Tailstock quill diameter 45 mm Tailstock cone 3 MK Tailstock quill stroke 120 mm Tailstock transverse adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg

Complete Cutting Line Equipped With: Colour Display TFT 10.4" Monitor, Programmable, 198 Programs Memory, Chrome Air Table, Side Air Tables, Light Barriers, Polar Lift, Polar Jogger, Polar Transomat, Polar Unloader, Books And Tools

Key data: 6000 mm, 2000 mm

Ref.Nr. 00846 Name of the system: Used waterjet machine Spare parts system Manufacturer Flow Model Foracon WS3-20/602KS Built in 1995 Sheet size 2000mm x 6000mm Achievement 9Kw ( Engine ) 2 pumps (flow) 2 cutting heads Operating hours pump 1 = 19700 h Operating hours pump 2 = 24751 h Incl. sand tower Incl. sludge removal system Renewal of the control system 2016 ( Engelmann company ) Condition of the system was disconnected a week ago Is still under power but cannot be demonstrated because the cables have been cut during disconnection Customer has used the system until the end Submission date Immediately

Specifications: Year of construction approx. 1988 Center height 120 mm Center width 430 mm Speed: 60 - 3000 rpm in 18 gear stages Spindle Passage 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feeds from 0.03 to 0.15 mm /rev Possible Threads Metric, Inch, Module and Diametrical Pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m

Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW

Air table Polar; cleaned and tested; Format 75x35cm; height-adjustable. AIr table Polar; cleaned and checked; size 75x35cm; adjustable in hight.

Air table 2 side tables 3 knives Photocells Program Video available upon request

BLM-ADIGE JUMBO LT14 tube laser cutting machine was built in 2014 in Italy by BLM S.p.A. The machine’s high versatility and extensive machining capabilities make it the perfect choice for precision machining of tubes, open profiles, I-beams and special profiles of large dimensions. It will significantly reduce the cost of producing a single component and improve the quality of cutting compared to other technologies available on the market. The BLM-ADIGE LT JUMBO 14 3D tube laser cutting machine performs machining fully automatically, without the need for retooling or manual adjustments. Once the workpieces have been fed in, the loading unit with conveyor system segregates them according to cross-section, diameter and length. The workpiece is then moved towards the work area, where it is held by three special spindles that eliminate uncontrolled movements and guarantee more precise,  ...

Cross-cut saw motor 1.8 kW Milling motor above 1.8 kW Milling motor bottom 1.8 kW Sliding table with Superfix hand clamp Saw blade 2 slotted discs

Cross-cut saw diam. 300 mm Milling spindle diam. 40 mm Sliding table with Festo length stop Suction nozzle saw 120 mm dto. Milling machine 140 mm Cable + plug 16 Amp, without bed. tools Workshop overhauled

CORMAK LF3015LNR laser cutting machine was built in 2021 by the Polish company CORMAK. The machine, which is designed for precision cutting of tubes, sheets and profiles, uses advanced FIBER technology to machine even the hardest materials of various thicknesses. This technology is a much more cost-effective alternative to CO2 machines of similar power, while also guaranteeing low operating costs and trouble-free operation for many years of use. The workpieces are machined with a reliable RAYTOOLS cutting head with autofocus and protective glass. It moves along a sliding gantry made of aircraft aluminium. The installed software automatically adjusts the focus lens from -10 mm to +10 mm, ten times faster than standard manual adjustment. Both the collimator lens and the focus lens are equipped with a heatsink to reduce the temperature of the cutting head and thus extend its service life ...

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

Cutting Machine Fischer Hartmannsdorf OK S TZ 2 Year: 1981 0.37 kW 220 / 380 V Dimensions: 350 x 180 x 480 mm Weight: 11.5 kg

Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

CNC Flame Cutting Machine BACH APOLDA AC 2500 Year: 1993 Control: MESSER GRIESHEIM KS20A Dimension : 3800 x 2000 mm 2 burners oxygen, propane without table ! Rails 8 meters (2 x 8 meters) used, tested ! Documents available. Dimensions : 3800 x 2000 x 2000 mm

Cutting Wheel Set RIDGID E-1032 Diameter: 38.6 mm Cutting Depth: 11 mm Cutting Wheel Set consists of 6 cutting wheels ! New ! Dimensions(Packaging): 80 x 60 x 45 mm

CNC Flame Cutting Machine, Plasma Cutting Machine BACH APOLDA ACW 2500 Year: 2001 Control: NBS 400 Dimensions of System: 4100 x 1900 x 1500 mm without table: rail 8 meter (2 x 8 meter) 2 oxy-fuel cutting heads 1 plasma cutting head MANNSFELD PGS 50 74 kVA Bj.: 1988 without table ! used, tested ! Dimension plasma equal: 1600 x 660 x 1500 mm

Cutting dies, tapping dies, hexagonal JBO R1.1/2 HSS Wrench size: 85 mm New ! Dimensions: 98 x 85 x 22 mm

Cutting dies, tapping dies, hexagonal JBO R1.1/4 HSS Wrench size: 70 mm New ! Dimensions: 81 x 70 x 20 mm

Cutting dies, tapping dies, hexagonal JBO R1 HSS wrench size: 60 mm New ! Dimensions: 69 x 60 x 18 mm

Cutting dies, tapping dies, hexagonal JBO BSP G3/4 HSS Wrench size: 60 mm New ! Dimensions: 69 x 60 x 18 mm

Cutting dies, tapping dies, hexagon EMUGE G3/4 HSS ISO 228 Wrench size: 50 mm New ! Dimensions: 56 x 50 x 16 mm

Cutting dies, tapping dies, hexagon EMUGE G1A HSS ISO 228 wrench size: 60 mm New ! Dimensions: 68 x 60 x 18 mm

Cutting dies, tapping dies, hexagon JBO BSP G1 HSS Wrench size: 60 mm New ! Dimensions: 69 x 60 x 18 mm

Cutting Dies, Tapping Dies RAXA 6M R2 HSS Diameter: Ø 105 mm New ! Dimensions: 105 x 105 x 22 mm

Cutting dies, tapping dies PAGUS R1.1/2 HSS diameter: Ø 90 mm used ! Dimensions: 90 x 90 x 22 mm

Cutting Dies, Tapping Dies RAXA 6M R1-1/4 HSS Diameter: Ø 75 mm New ! Dimensions: 75 x 75 x 20 mm

Cutting dies, tapping dies PAGUS R1 6110-1n HSS diameter: Ø 65 mm New ! ! Dimensions: 65 x 65 x 18 mm

Cutting dies, tapping dies EMUGE R1 HSS diameter: Ø 65 mm New ! Dimensions: 65 x 65 x 22 mm

Cutting dies, tapping dies FW R1-1/4 HSS Diameter: Ø 75 mm New ! Dimensions: 75 x 75 x 20 mm

Cutting head ROLLER ́S CENTRAL M32 x 1.5 holder: Ø 64 mm Dimensions: 80 x 84 x 84 mm

Cutting head ROLLER ́S CENTRAL M40 x 1.5 holder: Ø 64 mm Dimensions: 80 x 92 x 92 mm

Cutting head ROLLER ́S Central R1/2 holder: Ø 64 mm Dimensions: 80 x 70 x 70 mm

Cutting head ROLLER ́S Central R1.1/4 holder: Ø 64 mm Dimensions: 80 x 95 x 95 mm

Cutting head ROLLER ́S ROLA-H Pg 16 holder: Ø 64 mm Dimensions: 120 x 86 x 86 mm

Cutting head ROLLER ́S ROLA-H Pg 21 holder: Ø 64 mm Dimensions: 120 x 86 x 86 mm

Cutting head ROLLER ́S ROLA-H Pg 29 holder: Ø 64 mm Dimensions: 125 x 100 x 100 mm

Cutting head ROLLER ́S CENTRAL M25 x 1,5 holder: Ø 64 mm Dimensions: 80 x 80 x 80 mm

Holder for tapping head WMW Z39 Outer diameter: 180 mm Inner diameter: 45 mm Dimensions: 180 x 180 x 125 mm  

Bread slicer Band slicer PS Mako Slicer 400 - Ribbon bread slicer - Manufacturer: PS Mako - Type: Slicer 400 - Operating voltage: 400 volts - Rated current: 8A - Year of construction: 2002

Hego cut-to-length line Working width 500x2mm Speed 10-12m/min Decoiler mechanical max. 1000kg Coil inner diameter 400/508mm Straightener with 9 straightening rollers and 2 feed rollers and film unwinders The offer is aimed exclusively at tradespeople within the meaning of §14 BGB no sale to private individuals!

Find more here - .ucymachines/

Bread slicer Treif Diskus 400+ circular knife -digital control - Cutting width adjustable from 3 mm to 15 mm - 400V 50Hz - Stainless steel cladding - Weight 195 kg - Operating voltage 400 volts - Control voltage 24V/DC V AC - Nominal power 0.9 kW - Year of construction 2015 External dimensions: width 80 cm depth 70 cm height 112 cm

a Plasma Cutter for sale, 70A source, 2500 x 1250 CNC bed 2021 Mantech Phantom P26 The machine is a Mantech Phantom P26, please note that it is running a 70CT GYS powersource rather than Hypertherm. The machine was new in July 2021 and has had only light use, it is essentially in as new” condition. It has touch screen control / windows PC. Power requirement is TWO 32A Class D sockets, plus gas (we run on dry refrigerated air) Find more here - .ucymachines/

The machine (built 1999) comes with a table of 3 x 4m, can work with up to four cutting heads and is fully functional. The scope of supply includes an automatic sludge extraction system, sand storage tank incl. pressure vessel and an Ingersoll high-pressure pump. 2x head system. Can also run with 4x heads 1x pump included. has always been serviced. Is ready to use. Great working condition. Find more here - .ucymachines/ Contact us at - sales@ucymachines

2000 Sato Elektronik SATRONIK Flame cutting machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

1998 Sato Elektronik SATRONIK CNC 801 Flame cutting machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

2022 Diebels RMH Con Sort III Wet cutting table Technical data: Drive power [kW]: 2.6/32 CEE plug Separating area LxW [mm]: 1270 x 710 Lightweight discharge area [mm]: 1270 x 710 Number of water pipes [pcs]: 5 Number of water nozzles [pcs.]: 18 Water tank volume [litres]: 400 Electrical connection [V/A]: 400 / 32 CEE plug Weight [kg]: 750 Dimensions (without tank) LxWxH [mm]: 2500x1010x1120 Speed control in 3 stages via potentiometer on the control cabinet VA water tank with waste water pump Automatic water level control via Quick stop Operational hours: 100 hours. The separate water tank with filter was adapted by us to this system and would also be included in the sale if desired. This also applies to the table frame. Find more here - .ucymachines/ Contact us at - sales@ucymachines