plants used for sale

​Complete aseptic line for the production of pasteurized products (using it for ice tea bottles). The line is installed in 2005, has been operating since 2006 and will run till Q3 of 2026. The line includes processing area (mixer, pasteurizer and sterile buffer tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper., General:, Size of the bottles: 400 ml / 500 ml / 1,5 liter bottle with stopper (cap), Material of the bottle / Compesition: PET, Bottle closed with a snap cap, Capacity of the line: depending on the bottle size: 18.000 l/h and 27.000 l/h, Product: Ice tea (softdrink), Scope of Supply:, 1. Mixing plant, Manufacturer: Tetra Pak, Model/type: Alblend 10 2S FB, Year of m ...

Condition: used,Other: Overall width: 1,950 mmTotal depth: 1050 mmTotal height: 1,400 mmHot mixer: approx. 10 litres - 5.5 kWCalter mixer: approx. 25 litres - 2.2 kWFflange closure of the hot mixer may be missing and would have to be replaced on site,Manufacturer: DIOSNA Dierks & Söhne

The plant include Major 3 decanter P1500/2000 Seperator All equipments include

The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 22 kW - 400 V - 50 Hz - 2.950 rpm - 38,8 A. P(inlet): 1.013 hPa. P(outlet): 800 hPa. PS: 820 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 372 cfm. Sound level: 89 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...

Technical description  Laminator for foil finishing . Solvent-free lamination . Foil _Folie, Alu foil, Cylinder width 1310 mm Laminating width 1300 mm Laminator Type = Duplex Diameter unwinder = 850 mm ( turnstile ) Diameter rewinder = 850 mm ( turnstile ) Sleeve 3 and 6 inches, Speed max = 450 m/ min. With accessories 

Fat Baker TOP Jufeba WW-GW 20 Full reversible basket for max. 60 pieces 1 proofing trolley with ALU tipping trough Robust technology LED Temperature Controller with Safety Thermostat Output approx. 600 pieces/hour Connection 400V, 32A-CEE plug Dimensions: 1325/2425 x 825 x 1135 mm, WxDxH Used device Visit our large exhibition!

KRONES ROUND GLASS LINE Features: • Year 2003 • 500/600BPM @ 700ml, 750ml, 1 Litre • Wraparound Boxes • 6 & 12 Pack • Cold Glue Front, Back & Tax Strip Labeller Asset List: 1 Waste compactor; 2006; Orwak; 9020; 54414; 415/50 2 De Palletiser; 2003; Krones Kettner; Prress Uni Abscheiber;22/0142/012; 415/50 3 Rinser 72 heads; 2003; Krones; Variojet; K563-291; 415/50 4 Filler 108 heads; 2003; Krones; Isofil; 2880 072-126; 415/50 5 Capper 18 heads; 2003; Krones; Topmatic/ Zalkin; 734-203; 415/50 6 Label check; 2015; Logics & Control; Logilook; 2359; 240/50 7 Case packer; 2003; Krones Kellner; Wrapapac W60; K95-044; 415/50 8 Laner; Krones; Multidivider 9 Robot; 2003; Krones/Kettner; Robogrip Entlander; 22/0795/008; 415/50 10 Spiral Case Elevator; Amberflex; 415/50 11 Bottle coder; 2017; Linx; 7900; AN135;240/50

STORK MINIATURE LINE Features: • 50ml Glass & PET • 200 BPM • Flask Oval Round • Self Adhesive Front & Back Labeller • CAP Size 18 X 12, 20 X 12 ROPP Asset List: 1 Manual bottle infeed 2 Bottle conveyors 3 Header tank stainless steel 4 Rinser filler capper; 1996; Stork; Block 36 head rinser, filler, 9 head capper. New PLC HMI fitted 2021; 415/50 5 Level control / case reject; 2017; Logics and control; Logilevel HF1400; 2723; 240/50 6 3 station labeller; 1996 ; Krones; Autocol; 747-264; 415/50 7 Checkweigher; 2022; Garvens; Safeline; 333968; 240/50 8 Scale check; 2017; Logics and control; Logiweight LS; 2721; 240/50 9 &10 Case packer; Ganz brothers; CB90; DS22392; 415/50 11 Case sealer; 1995; 3M; 800AF-E; 2247; 240/50 12 Case coder and reject; 2019; Linx; IJ375; JB590; 240/50 13 Case erector; Kettner 14 Carton spiral elevator; 201 ...

BERTOLASO LINE Features: • Flask & Round • Glass & PET • 200BPM • 100ml, 200ml, 300ml, 375ml, 500ml • Wet Glue Front & Back Labeller Asset List: 1 Case erector and spiral elevator; 2013; Bortolinkemo; 415/50 2 DEPAL; 2000; OSMEKA; VAE; 521-0742; 415/50 3 Bottle conveyors 4 Rinser, filler, capper; 2013; Bertolaso; Epica 32/32/8; PMDM010128; 415/50 5 Packing table; 2006; Hutton; Gravity roller; 240/50 6 Labeller; 1994; Cavagnino & Gatti; C4810; 415/50 7 Case packer; 2005; Aries; 602; 152; 415/50 8 Case sealer; 1995; 3M; 800 AF; 224; 415/50 9 Case coder; 2019; Linx; IJ375; JB494; 240/50 10 Level check; 2017; Logics and control / Bertolaso; Logilevel plus; 240/50 11 Case spiral elevator end of line; 2022; Ambaflex; Spiralveyor SV; 51947-02; 415/50

STORK GLASS LINE Features: • Round, Shaped, Tapered • 350ml, 700ml, 750ml, 1.14 Litre • 200BPM • Wet Glue Front, Back, Neck Labeller Asset List: 1 DEPAL; 1996; Osmeka VAE; 521-0136; 415/50 2 Carton erector with Nordson hot glue applicator; 2013; Bortolinkemo; 415/50 3 Rinser filler capper; 1996; Stork; RVR30/146-36-9 LW; 021.141.10; 415/50 4 Labeller; 1996; Cavagnino & Gatti; CG84CL3/18; B4900; 415/50 5 Laner; 1996; Stork; SIE1500PB3; 031.169.00; 415/50 6 Case packer; 1996; Stork; 415/50 7 Case sealer; 1998; 3M; 800Afe; 3158; 415/50 8 Scale check weigher; 2016; Logics & Control; Logiweight LS; 2513; 240/50 9 Spiral carton elevator; 2022; Ambaflex; Spiralveyor SV; 51947-01; 415/50 10 Spiral carton elevator; 2013; Ambaflex; Spiralveyor SV; 15432-02; 415/50

Used, complete aseptic bottling line manufactured by Procomac. New: 2005. A controlled-contamination filling line with microbiological isolation, designed for filling products with a pH lower than 4.5. Suitable for PCO 1881 28mm bottles; sport-cap and flat-cap closures. General description of the system: Bottles delivered to the monoblock are completely sterilised with an oxidising solution, rinsed with sterile water and delivered to the filler. The bottles are filled by electrically controlled fillers and sealed using an aseptic capping machine. The caps are fed to the steriliser via a feeder and a belt conveyor in a positive-pressure environment using sterile air; they are sterilised with an oxidising agent (oxonia), rinsed with sterile water and fed to the monoblock via a positive-pressure feed channel with sterile air. The monoblock is equipped with a microbiological isolator ...

Fat Baker Roka / Kippfix SB 40B-S for approx.: 360 pieces/hour donuts / doughnuts 2 Baking Baskets & 1 Steam Lid Drip tray Connection 400V, 16A-CEE plug Used device

Hagesana Filter King TOP Model: F 20 Tabletop device Stainless steel version Connection 220V Used device

Number of layers = 3, material LDPE,HDPE; Peel Products : HDPE /LDPE Film 25 – 150 my, Film width max. = 1100 -1850 mm Extruder type = 70.30 D / 70.30 D / 70.30 D Nozzle = 300 mm Manufacturer Reifenhäuser, Output = 250 – 300 kg/h, with internal cooling With thickness measurement, adjustable basket, thickness control, IBC Upgrade 2017 by K design Rotatable trigger Gravimetric system 3 main components plus 3 x 3 dosing components Winder Type= Tandem Max. diameter rewinder = 950 mm Winding shaft = 76/152 mm Accessories: 2 x Corona inside and outside, path control ; Fan , Steel Structure, Dimensions : length approx. 14 m, width = approx. 8.5 m, height = approx. 14 m

The Fristam Double Screw Pump combines process duties typically handled by positive displacement with Cleaning-in-Place (CIP) duties typically handled by centrifugal pumps. This provides a robust and reliable platform that offers greater process flexibility. It is capable of handling both product transfer and CIP. Its low pulsation characteristics and excellent solids-handling capability reduce the risk of product damage, thereby improving product quality. Designed for handling sensitive, abrasive and high and low viscosity fluids, so ideal for use in a hygienic application accross the dairy, food, beverage and home/personal care industries. This pump is previously used in a dairy factory for pumping of milk. Maximum flow with milk: 7 m3/h. Maximum flow during CIP: 12 m3/h. Maximum particle size: 18 mm. Inlet connections: 2,5 SMS. Outlet connections: 2 SMS. Current motor: 1,5 kW - 400 V  ...

Complete packing line for liquid/gel products in sticks, comprising: Inever PH6/8 - 8 lane stick pack machine with 8 rotary piston pumps, currently set up for sticks of 23mm width and max. 160mm length, with filling volume of 10 – 14 ml, with adequate format parts, sticks of 17 to 35 mm width can be processed, reel diameter 600mm, reel width 640mm, fitted with Allen Coding device, electrics 400V/3Ph/50/ 60Hz, power consumption 10kW, required air pressure 6 bar, machine floor space approx. 2200 x 2100mm (WxD), machine height approx. 3100 mm, machine net weight approx. 2850 kg. Enflex ENF11 horizontal intermittent-motion cartoning machine, carton size from 50 x 50 x 15mm to 125 x 180 x 40mm (or 125 x 140 x 60m). Includes pre-folded leaflet inserter, Nordson ProBlue hot-melt unit for glue closure of the carton flaps, output up to 60 cartons per minute, electrics 400V/3Ph/50 Hz, power co ...

Glass Bottle Filling and Capping Monoblock KHS Innofill 32000 bph The KHS Innofill DRS-ZMS is a 80 filling valve, fully automatic rotary glass bottle filling and capping monoblock designed for the bottling of beer, carbonated soft drinks and other beverages in glass bottles. The filler was manufactured in 1997 and refurbished in 2023 with new Simens Simatic S7 series control system. The filler is a counter-pressure filler and it has two capping units integrated in one monoblock triblock. Both cappers has 15 capping heads, crown capper for glass bottles and screw capper for PET bottles, providing flexibility on production using the same production line. The KHS Innofill DRS-ZMS is a fully automatic electronic pressure filling system designed for hygienic filling of carbonated beverages. Product, gas and CIP media are supplied through hygienic, deposit-free sealing systems to ensu ...

Oddy Novatek 2 Pocket Bread Dough roller and moulding machine, comes as 1 with a top weight dividing machine head and the bottom rolling and pinning machine attachment, 2 sets of weight blocks 65g-150g, 3 Drums, selling due to a change in our operation.

Chamber pasteurizer for pasteurizing bottled beverages. The machine can accommodate up to 9 pallets at a time. Pressing the start button causes the door to close automatically and the chamber pasteurizer to start the program previously set via the visualization system. Once the program has run its course, the door opens automatically. Manual operation with manual control of the actuators is also possible., Additional title: for simultaneous pasteurization of up to 9 pallets, Max. load: 9 pallets, Voltage: 380 V, Frequency: 50 Hz, Material: stainless steel housing, Base construction: standing on feet, Features: pasteurization chamber, pallet conveyor, blower, extraction system, control system, and visualization

Linear can filler with a rinser, filler, cap placer and sealer integrated into a single unit. Back-pressure filling is volumetrically controlled. Format adapters are available for all standard can sizes., Additional title: with 6 filling stations, Capacity: 2000 cans/h for carbonated drinks, Max. oxygen pickup on the filler: 25 ppb, Compressed air: IG 1/2, 6 - 10 bar, Length: 2774 mm, Width: 1100 mm, Height: 2000 mm, Formats: 12 oz and 16 oz cans, lid type 202 B64, conversion to other formats possible, Operation / Control: Siemens Simatic S7, Features: 6 filling stations, 7 inch touchscreen with swivel arm, infeed screw, product buffer tank (3 bar), servo driven seamer, tunnel for can rinsing after filling, motors by SEW

Combined rinser and filler for 0.5 litre, 1.0 litre and 1.5 litre PET bottles. Output: 24,000 bottles/h A chlorine dioxide dosing unit and a sterile water supply are connected to the rinser. The filler is equipped with a screw capper. The filling quantity is controlled via flow measurement. Liquid nitrogen dosing is possible via a mobile system., Additional title: PET bottle sanitising and filling system, Capacity: 24000 b/h , Formats: 0,5 l, 1,0 l und 1,5 l PET-bottles, Running direction: left -> right, Operation / Control: Touch-Panel / Simatic S 7, Material: mainly stainless steel, Position: free standing, Features: Stainless steel enclosure, plexiglass protective screen opening upwards; 70 rinsing valves on the rinser; 80 filling valves; filling quantity recording via IDM; Alcoa capper 28 mm Bericap; Prominent chlorine dioxide dosing; filtration system for sterile water, mobile liqui ...

The fully-automated carbonisation plant produces the CO2-amount of beer, beer mixing beverages, soft drinks, mineral water and wine in a continuous and high-precision way by precise controlled dosing of CO2., Capacity beer feed: 20000 l/h, Capacity degassed water: 10000 l/h, Capacity blended beer: 30000 l/h , CO2-supply: 8 barg, Power: 23 kW, Current: 50 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 6 bar, Length: 2790 mm, Width: 1250 mm, Height: 2440 mm, Weight: 500 kg, Operation / Control: fully automatic, electrical cabinet with control panel, Material: stainless steel, Features: Flange connection: Beer: DN80, degassed water: DN40, CO2: DN25, blended beer: DN65 Beer pump; carbonisation section; flow measurement; Anton Paar original wort, alcohol and CO2 measurement; pressure gauge; sampling taps; various other valves

Sturm Coating System Description: For sale is a used coating plant from the manufacturer Sturm, formerly used at the Mercedes-Benz plant in Hamburg for the machining of rear axle beams. Technical data & scope of delivery: Manufacturer: Sturm (plant) / KUKA & Yaskawa (robot) Year of construction main plant: 2019 Former operation: 3-shift (age-appropriate condition) Plant components: Aggregates, dryer and cooling zone, paint booth, loading and unloading station Included robots / peripherals: Several replacement KUKA robots (models KR 210L 150-2 / KR 210 2, model years 2006–2012) Related Robot Control Cabinets 2x Yaskawa Robot EPX 2900 1x Thermal aftertreatment / exhaust air purification system (VeniaKab / RNV) Condition notes: Control technology: According to plant maintenance, it is state-of-the-art Electrics & mechanics: Mostly in an age-appropriate or good con ...

Manufacturer: Global EnerTec Year of manufacture: 2024 (produced March 2024, commissioned September 2024) Model / Type: GET Granulierungslinie 3t/h Type of machine: Tire recycling and rubber recycling line Operating hours: less than 500 hours Condition: Fully functional, currently in operation Input capacity: 3 tons of shredded tires per hour Input material: Shredded used tires, edge length 50 to 100 mm Output quality: Rubber granulate 0.8 to 4 mm, free of fiber and steel Connected load: 574 kW Average consumption: 340 kWh per hour Voltage: 400 V Plant size (length x width x height): approximately 32,300 x 11,700 x 6,600 mm Recommended hall size: 40 x 20 meters, minimum height 7 meters, recommended 8 meters Operating personnel: 1 plant operator plus 1 production assistant per shift Certification: CE certified Control and electronics: Siemens PLC control, with components f ...

We are selling our BTH system. The plant was extensively maintained (by the supplier Premier Tech) and prepared for a new packaging project, which was unfortunately cancelled. Currently, we only have one customer with about two production runs per year, each lasting about two weeks. It is a special project in which 4.8 kg are filled into transparent PE bags; this is possible with the machine at low power. The machine is designed for daily operation, which is why we now want to sell it. Below you will find some information. If you are interested, you are welcome to visit the machine on site. In order to continue supplying our customers with the 4.8 kg bags, we can sell the machine together with this project (it is a food-grade allergen-free product for a non-food application). Packaging in paper bags with an inner bag (liner) is much faster and easier. For questions or more videos, pleas ...

Round and long moulders, Weight range approx. 350 - 2100gr Hourly output up to approx. 2000 pcs Ribbon Circular Knitted Length: approx. 280cm Adjustable trough inclination Long moulder up to max. product length 50cm Knitted board approx. 120cm long Stainless steel version incl. 2 flourers Wheat mixed doughs (90/10) to rye mixed doughs (90/10). Dimensions [W x H x L] 1,060 x 2,130 x 3,630 mm Connection 400V 5.5KW, 32A plug

ID3818 Sorting conveyor belt / Sortierband Year/Year 2021

length: . mm width: . mm height: . mm Workbench with vice and assembly block Kelch The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 13000 mm y-travel: 2750 mm z-travel: 3000 mm turning speeds: 600 U/min spindle taper ISO: 50 milling head: 4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m No. 11137 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 y-travel: 1300 mm z-travel: 1450 mm Control: Siemens 840C Tool changer: 100 Pos number of spindle speeds: 10-4000U/min tool taper: Iso50 A-axis: -100°/+10° c-axis: 360.000° 0 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: . mm width: . mm height: . mm a workbench with a vice The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 2500 mm z-travel: 1000 mm Control: Siemens type: 840 D Feed: 5-30.000 mm/min Table area: 2000x2170 mm table load: 1500 Kg/m² T-slots: 22 H9 distance between uprigths: 2500 mm spindle turning speed range: 6000 U/min spindle drive: 36 kW spindle taper: HSK 100 Tool changer: 30 Rotary table: 2000 mm speeds: 250 U/min turning diameter: 2500 mm table load: 10 t Torque: 33000 Nm total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: 8x6,4x4,4 m Gentry gantry milling machine with carousel rotary table Head change station Tool changer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items a ...

weight max.: 20 t axial load -forward: 9 t axis load in the back: 9 t Brake system: size of tire: 550/45-22,5 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Tandem tipper Hydraulic tailgate Grain pusher Dual-circuit braking system Trailer hitch The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with Mo ...

length: 1500 mm width: 700 mm height: 830 mm a workbench with a vice The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1500 mm width: 800 mm height: 860 mm a workbench with a vice The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 2500 mm z-travel: 1000 mm Control: Siemens type: Sinumerik 840 D Feed: 5-30.000 mm/min Table area: 2000x2170 mm table load: 1500 Kg/m² T-slots: 22 H9 distance between uprigths: 2500 mm spindle turning speed range: 6000 U/min spindle drive: 36 kW spindle taper: HSK 100 Tool changer: 30 Rotary table: 2000 mm speeds: 250 U/min turning diameter: 2500 mm table load: 10 t Torque: 33000 Nm total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: 8x6,4x4,4 m Gentry gantry milling machine with carousel rotary table Head change station Tool changer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,0 ...

filtration performance: . l/min fleece width: . mm temperature: . °C The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: . bar coolant capacity: . l Expansion Range: . mm Paper belt filter Allweiler Filter flange 800x500 Tank 1400x800x40 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roka Werk Kippfix TW-36E Fat Baking Machine with Accessories - Manufacturer: Roka factory - Model: Kippfix TW-36E - Fat baking device for donuts and donuts - made of stainless steel - Digital control with temperature and baking time display - With standby function at 140°C - With turning device - With tipping zone incl. drip tray - with 2 baskets - Hourly output approx. 360 pieces Technical data: - Power 7.2 kW - 3/ 400 V - 50 Hz

Fat Baker Jufeba WW-GW 05 2 reversible baskets for max. 36 pieces each Steam lid, drainer tray with proofing trolley and ALU tipping troughs only with us DGUV V3 electrical test Connection 400V, 16A-CEE plug Used device with warranty

Milk E-Heating System PHE, Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump., Make: DMUK, Capacity: 1000-1000 L/h, Temperatures: Regulated by the controls, Circulation Pump: Included, Control Panel: Included, VDF: Included, Condition: Excellent

USED TETRA PAK REX TR27 ASEPTIC FILLING AND CAPPING COMPLETE LINE FOR SALE YEAR 2016 Item #: Usm-245 Category Tetra Pak Rex USED TETRA REX TR/27 Complete Filling and Capping Line For Sale 500ml and 1000ml: 1-USED TETRA PAK ASEPTIC REX TR/27 Complete Filling and Capping Line For Sale YEAR OF MANUFACTURING 2016, Filling Size: 500ml and 1000ml PACK SHAPE ; GABLE TOP or Tetra Rex SPEED: 7000 PACKS PER HOUR ASEPTIC FILLING FOR LONG LIFE PRODUCTS 2-Tetra Pak Tray Machine, Cardboard Packer 32 by Tetra Pak, Wrap Around, Formats: 23, 43, YEAR OF MANUFACTURING 2016 3-Conveyors: Type: Conveyor Control System and Easy Ride and Long Conveyors Condition: Excellent and Tetra Pak Maintained

USED TETRA PAK TBA 19 200ML SLIM 10V FILLING LINE FOR SALE Item #: Usm-247 Category Tetra Pak TBA 19 1-Tetra Pak TBA 19 200ml Slim Filling Machine, Year of manufacturing 2003 and version 10 and with ASU- Auto splice unit, Working Hours 40183 2-Tetra Pak Straw applicator is tsa 21, Year of manufacturing 2003, Version 200v 3-Tetra Pak Multi Shrink 65, Year of manufacturing 2003 5-Packer CSB-10 6-Conveyors and Paper trolly Condition: Tetra Pak maintained and good condition line.

USED TETRA PAK TBA 19 125ML SLIM FILLING LINE FOR SALE YEAR 2007 Item #: Usm-248 Category Tetra Pak TBA 19 1-TBA 19 125ml Slim Filling Machine, Year of manufacturing 2007, Version 20v, with ASU Auto Splice unit, speed 7500 Packs per hour , Working Hours 42000 2-Tetra Straw applicator TSA 21, Year of manufacturing 2004, Version 200v 3-Tetra Multi Shrink Wrap 65, Year of manufacturing 2004 4-Packer CSB 1D 5-Conveyors and Paper trolly Condition: Tetra Pak maintained and excellent workinh condition

USED A3 SPEED 250ML BASE LEAF FILLING LINE FOR SALE YEAR 2010 Item #: Usm-249 Category Tetra Pak A3 Speed A3 Speed 250ml Base Leaf with DIMC Cap in Mold, VCK Change from 125ml to 250ml Base Leaf in 2020, DIMC installed in 2020, Version 300v, Working Hours 33485, Speed 24000 Packs per Hour, Tetra Tray Shrink 51, Year of manufacturing 2010 Conveyors Filling Machine, PC-23 with chain 29 meter, Drive unit 4 pcs, Bend 90 X 4 pcs Conveyors TTS-51, UC-24 with chain 6 meter Condition: Tetra Pak Maintained.

USED TETRA PAK A1 TWA 180ML ULTRA WEDGE FILLING LINE FOR SALE YEAR 2019 Item #: Usm-250 Category Tetra Pak A1 A1 TWA 180ml Ultra wedge filling line, year of manufacturing 2019, version 1000v, speed 10000 packs per hour. with straw applicator ,Packer, conveyors and paper trolly.

Complete SIG Combibloc CFA 124 36 Aseptic Filling Line For Sale Item #: Usm-256 Category Sig Combibloc Complete SIG Combibloc CFA 124-36 Aseptic Filling Line For Sale SIG Combibloc CFA 124-36 Filling Machine Year 2013, formats 125ml / 150ml / 200ml / 250ml, speed 24,000 packs per hour, working hours 20,428. Meurer Buffer Table Year 2013, model CM/HSP 3KF, working hours 20,428. Meurer Conveyor System Year 2013, model CM/FT, working hours 20,428. Geyssel Straw Applicator Year 2013, suitable for 125ml / 150ml / 200ml / 250ml formats. Meurer Multi Pack System Year 2013, formats (3x1, 3x2) and (4x1, 4x2). Meurer Tray Packer Year 2013, formats 3x8, 3x9, 4x6, and 4x10. Meurer Tray Packer / Shrink Unit Year 2013. Condition: The complete line has been professionally maintained by SIG Combibloc. Running hours are approximately 20,428.

MARIANA SHRINK TRM700 SERIES INCLDUING LF AND LFT VARIANTS YEAR 2020 Item #: Usm-251 Category Others Technical Specifications – TRM-700 Series Designed For 1000ml Tetra Edge Packs Production Capacity Up to 60 cycles per minute Product Size Range: Minimum Size: 60 × 120 × 60 mm (L × W × H) Maximum Size: 320 × 460 × 370 mm (L × W × H) Film Specifications: Film Type: LDPE (Polyethylene) Film Thickness: 30 – 90 µm Reel Width: 225 – 575 mm

TETRA PAK TR28 REX FILLING LINE FOR SALE YEAR 2021 Item #: Usm-257 Category Tetra Pak Rex Tetra Pak Filling Line – TR/28 General Information Manufacturer: Tetra Pak Machine Type: TR/28 carton filling machine Year of Manufacture: 2021 Country of Assembly: Sweden Performance & Capacity Configuration: Dual-lane filler Output per lane: approx. 7,000 packs/hour Total output: approx. 14,000 packs/hour Filling formats: 500 ml cartons 1,000 ml cartons Operating & Technical Data Operating hours (last service reference): approx. 5,455 hours Preventive maintenance completed (latest service): full service including 166 maintenance tasks System includes: Filling system Sterile air system Cleaning/CIP system Carton sterilization system Condition Regular preventive maintenance performed Latest service completed successfully (service complete”) Minor outstanding tasks  ...