plants used for sale

Precast Modular House Machine, Low Cost Precast Concrete House ERICH PETER MACHINES-PLANTS GMBH deals with complete solutions for the implementation of construction projects according to EU standards. We are not a construction company, but give the required knowledge in theory and practice to plan, calculate and implement construction projects. Business offers: ? Creation of necessary business, master and execution plans ? Sales of needed machines and plants for building material production ? Precast plant supply (new or refurbished) ? Plant commissioning and personnel training ? Concept & design for precast concrete projects as well as for multi-story wood structure buildings 5 key arguments: ? High speed buildings with short realisation time very important in all markets. ? High quality mainly in precast realised (minimized human failure) ? Low c ...

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

full line for mesh up to 6 m

Four nearly new moulds for garden wall and fence.

Hull engine in replacement Scania DC13-071A without turbo,EGR cooler+hoses,PDE's,controlr installed in Kleemann crushing plants. Price only on request

Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 (2 ...

Triplex solventless Laminator, The machines of 2018 are like new. Only about 200 hours Matrial for lamination : PP, Bopp, Pet ,laminates ,LDPE, LLDPE. web width =1530 mm Max lamination width = 1515 mm, Min. film width = 750 mm, Min. film width with extensions = 550 mm, diameter unwinder = 1000 mm, sleeve 76 / 152 mm, diameter rewinder = 1200 mm, sleeve 152 mm Speed = 450 m/min, Accessories: The machine has many accessories such as 2 mixing plants World Mixer SL 1 Cleaner SL

Stock No.: 2107 1 used, partially overhauled and function-tested strand granulator with >> Granules Cutting Lengths Adjustment ( SV ) Manufacturer COMAC - Italy Type SG-100 SV Strand inlet width 100 mm cutting rotor width 110 mm, Parallel section rotor with 32 teeth Rotor Ø 200 mm >> strand pellet cutting length adjustment 2 drives: 1x for cutting rotor - 4 kW 1x for feed roller 1.5 kW with STOBER reduction gear Soundproof housing of the pelletizing chamber Visit / test run possible shortly by appointment. We also have matching strand cooling basins, strand blowers and classifying screens available from stock. Further strand granulators and other pelletizing systems/plants available from stock ( water ring - , hot impact and underwater pelletizing )

USED GEA TUBULAR JUICE PASTEURISER DEAERATOR AND HOMOGENISER 7700 LPH FOR SALE Item #: Usm-187 Category UHT Plants 1) Pasterization plant with deaerator Ø program controlled Pasterization plant for fruit and vegetable juices, with a indirect heating system and regenerative exchange circuit, including a CIP connection and a connected deaerator Ø Manufacturer: GEA Finnah GmbH Ø Type: 6700/077 Ø Year of manufacture: 1998 Ø Max.capacity: 7700 L/h Ø for fruit and vegetable juice : viscosity 25 cp/10°C ; fibre lenght: 4-6mm 2) Homogenizer Ø Manufacturer: GEA Finnah GmbH Ø Type: NS 3075/55 Ø Year of manufacture: 1998 Ø Capacity: 7700 L/h Ø Operating pressure: max. 220bar

Ladies and gentlemen, Below you will submit a non-binding offer for a foundry plant: 1 piece br. Endogas production plant, make LOI natural gas-heated, with modern measuring/control and control system and modern KROMSCHRÖDER torches, solid top fittings, compressors with separate mounted shaft and separate motor, 100 Nm3/h in 3-stage version, power min. 35 Nm3/h The power can be reduced to 40 Nm3/h. The operation of the system can also be carried out in a 1-stage manner, so that the power can be reduced accordingly. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...

1 piece plasma nitriding system Manufacturer: 1 piece used plasma nitriding system (tandem system) Dimensions: Diameter 1500 mm x 1000/2000/3000 mm (depending on whether 1/2/3 segment attachments be used) El. Connection value: 280 kVA It also includes an N2H2 fumigation device as well as an ammonia container. The plant was renewed in 2005. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: 1 piece used vacuum oven, Make: BMI Type: B 64 R THY Dimensions: 600 x 900 H x 600 mm Max. temperature: 750C Power: 60 kW max. batch weight: 600 kg Working vacuum: 5x10-2 to 5x10-3 mbar Cooling pressure: 1.2 bar abs. the parts remain bare Price and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data ...

3 roles standing mixer with control panel and mixer Manufacturer: King & Günther GmbH Type: Rexoplast Serial No.: 6306075 Year of construction: 1973 Mixer is equipped with Munkadur coating inside! In good condition!

Description: Extruder Plastmachines extrusion machine PME 80/35 Manufacturer: Plastmachines extrusion type: PME 80/35 Year of construction: 2004 Type of offer: second-hand machine Technical data: Plastmachines extrusion machine type: PME 80/35 control:-year: 2004 injection unit screw size mm: 80 additional information 75 KW power 250-300 kg / h degassing system complete granulation plant heating tee Kuehlsiepsystem 75 KW power 250-300 kg / h degassing complete granulating heating tea cooling system siep

On 4 castors-standing stainless steel mixing tank with propeller agitator Material: V2A (1.4301) Container has a hinged lid and a spout at the bottom with a valve DN 25 drawn forward. In very good condition!

Air-separator for hard material, drum diameter x width: 1,400 x 1,200 mm, feeder 1,000 x 1,500 mm with vibrator, blower with approximately 7,000 cbm flow, including steel-frame, machine is to separate heavy material from light one

SIG-HBM: Maximum width of the film roll: 740 mm Control: Siemens S7 Product Moulding / straightening / filling / closing of bags - tubular bags Description horizontal bagging machine, rotating cross-sealing station for hot or cold sealing The machine is designed for the following products: chocolate bars, fruf bars, chocolate table, waffle, biscuit stacks, baked goods, deep food, non-food, pre-packaged products, cheese, meat,

Niro atomizer Type: F 160 Feed rate: max 50 t / h Weight: 450 kg Country of origin: Denmark

We´re offereing successfully since many years twin-screw compounding extruders >> NEW segmented screws and cylinders, LD ratio due to your request Side-feeders, vacuum ports and accessories Please contact us for further information

Year issue: 2017 - new Capacity: 20,000 cph, complete stainless steel Product: energy drinks and juice Can: 250 ml. Type of can: 202/200 slim can Heating method: Steam - Plate heat exchanger in outside of pasteurizer Material: Stainless steel AISI 304 1. TECHNICAL CHARACTERISTICS OF THE PASTEURIZER Temperature of product (inlet temperature) in pasteurizer: 2? - +6? Temperature of product (outlet temperature) from pasteurizer: +27? - +30? Pasteurizing temperature: +72? - +75? Holding on pasteurizing temperature: 12.5 min Heat consumption (steam by 3-4 bar) during stable operation: 480-550 Kg/h Temperature of steam: +140? Water consumption during stable operation: 0.5 - 0.9 m3/h. Consumption of compressed air 6 bar: 500-700 nl/h Total power consumption: 30 kw Supply voltage: 3F/N/PE/A, 50Hz, Control voltage: 400 volts Degree of protection: IP-54  ...

Sell granulator for plastic strands of extrusion. 7,5 kW power. Sale, clearance there. If it works, I don't know, therefore the reasonable sale price.

New machine with 3 x 800 ltr. Tanks Heating system: with steam through heat exchanger The whole system is disigned to enalbe sterilzation and cleaning of filler without disassembly of parts or components Technical data: - Output pressure: 4 bar - Temperature of feed water: 15-20oC - Steam Pressure: 3 bar - Steam flow: 300 kg/h - Temperature of steam: 120-130C - Pressure of air: 6 bar - Installed electrical power: 4 kW

Loading / loading for boilers or similar in a very good used and functional condition. Custom order / manufacturer unknown. Completely made of stainless steel, rollable, including basket, basket size B/D/H 105/85/70 cm. Dimensions W/D/H 170/100/250 cm. Workshop tested, ready for use. More on request.

Used fat fryer for berliners REIMELT, type: EL 10-1700 - In the bakery condition- - 10 rows - 2 injection stations - evaporator hood - 3 tipping plank wagons - many parts have been replaced - condition: very good, ready for operation Capacity: 1.800 PCs. / h El. connection: 220 / 380 V, 50 Hz, 30 kW / 63 A Protection class: IP 54 Length: 4.700 mm The line is in a very great condition and ready for operation. AN inspection is possible at every time. Further details on request.

Small vibrating sieve with two decks for three fractions. The diameter of the sieve inserts is 400 mm. This includes a bet with balls that keep the screen insert clean from below. This is suitable, for example, for the screening/classification/quality assurance of copper granules (contamination by plastics or aluminium are sifted) or for the re-treatment of plastic granules from the cable recycling. The sieve is located in our demo pool and is little needed.

Fettbackstation / Berliner Backstation consisting of 4 fat pans 1x Donut Filler 1x large exhaust hood incl. fire extinguishing function

J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...

Bread plant W&P Parta U CR59 The system consists of 4 machines 1x W&P Parta U dough divider 1x W&P Intermediate fermentation chamber 296 baskets 215x360cm and height 282cm 1x W&P CR59 Cone wiper 1x W&P long scooter

-for long rolling of breads -without nameplate -in baker's condition -Photos before cleaning

used cone round wherker Benier type Allround with adjustable angles for small and large weights.Kegelrundwiker is with heating and oiling.The cone round wherk is immediately available in the warehouse in Bielefeld. We will be happy to send you further pictures and details on request. Weight range from 100-1300 grams up to 4500 pieces / hrs ( depending on the dough weight) with leakconveyor belt with heating with oiling Built in 2005 Teflon coated cone and wire cara Dimensions: Height: 150 cm Width: 134 cm Depth: 132 cm

used Benier brotteig precursor with adjustable wits completely in stainless steel.The machine is immediately available in the warehouse in Bielefeld.Further used bakery machines please see the catalogue on the right we have more than 700 machines in stock in Stock. Built in 2002 400V / 50 Hz Stainless steel cladding with 2 blowers Scrapers are adjustable checked and cleaned Condition "good" Dimensions: Height: 150 cm Width: 220 cm Depth: 110 cm

Pos.1 Buffer conveyor belts for layer formation for 4 frieze lengths Pos.2 Gantry stacking system Pos.3 Parcel roller conveyors in the area of gantry systems Pos.4 Security technology Pos.5 Machine control Pos.6 Intermediate strip automatic The mechanization is designed for the following workpiece dimensions: Length: 320 - 1000 mm Width: 56 - 120 mm Thickness: 20 - 40 mm Stack Dimensions: Length: 400 - 1000 mm (double lengths up to 2 x 520mm) Width up to: 1200 mm Height up to: 1200 mm Stacking is carried out on Euro pallets Max. output: max 40 parts/min or max 4 layers/min (board or batten layer!) Pos.1 Buffer conveyor belts for layer formation for 4 frieze lengths Quantity: 4 pieces Length: 2600 mm each Usable width: 800 mm each Propulsion: Spur gear motor Conveying speed: 15 m/min Incl. side guide rulers and layer alignment (One layer is formed,  ...

R&E Conveyor No 2618 Y.O.M. 1998 Width 2x 650 Length 16 m Curved, head approx. 6 m Good condition!

Bread-long wrapper W&P BM 51 B -with blue plastic straps -mobile on wheels -for bakery baking industry

Pressure Bottle Filler. 24 fillers. System FALSCH FLASCHEN. Whole machine made in inox. Machine after total renovation in 2019. Warranty: 12 months.

Dairy Mschinery UK now offers new Glass Bottle Fillers for Milk and Juice. We offer machines for Hot fill and Cold Fill. Our bottle capacities are between 1000 - 7000 bottles per hour. Manufacture : Dairy Machinery UK Volume : 500ml - 1000ml Capacity : Option on order between 1000- 7000 bph Capping : 38mm magnetic capping chucks Filling Nozzles : Gravity Filling on Rubbers Lift and Fill or Gravity Filling Drop and Fill Cap : Aluminium Screw Cap CIP : Available Controls : Control panel Standards 2019 Certified : EC certificates Installation : We install all our machines at the clients facilities. Warranty : 12 months Spare Parts : spares@dairymachineryuk.co.uk

Conveyor belt / climbing belt (inchGiraffeinch), built in 2013, in a very good used and functional condition. All metal parts made of stainless steel. Plastic conveyor belt, 45 cm wide, with takers. Rise height 210 cm. Machine is rollable. Speed infinitely adjustable. Connection values 400 volts, 0.55 kW. Workshop-tested, ready for immediate use. More on request.

Reimelt fat baking plant 8 in rows with jam syringe, with exhaust air hood incl. extinguishing function. -Power consumption 80 kW -Nominal current approx. 116 A -Fuse 160 A -Protection class IP54 -Control voltage 230 VAC 24VDC -Three-phase current 400 V 3N 50Hz

Fat baking device Berlinerbackstation Esback -Built in 2009

Compounding system with underwater granulation. Material: PE, PP, PS, ABS (+ fillers) // Details: DC motor, DC rotor, segmented screws (2x x 70 mm / 40D) and cylinders, degassing, vacuum pump, stuffing unit, backwash screen changer GNEUSS RSF 150, underwater granulation GALA with cutting rotor, water circulation system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization. Available at an additional cost: Sidefeeder, 4-fold gravimetric dosing system. (Ref. No. G27615.2)

CoEx plate system net. 1350x1-10 mm Material: PE, PS, HIPS, ABS / Details: Main extruder RH EH2400-1-150-33V, co-extruder RH 121-1-50-30V, vacuum pump, CoEx-block, double hydr. Sieve changer with hydr. Station, wide-slit nozzle 1,450 mm, 3-roller smoothing unit RH GK-1600-60-G1 1,640 x 600 mm, Kelvi Plast temperature control unit, cooling section, side strip trim with knife beam, rubber roller extractor RH AT160-20, guillotine RAS 83.20, vacuum conveyor, CoEx dryer material, stacking device. (Ref-No. T27614)

Compounding plant Material: PE, PP, PS, WPC + fillers / Details: segmented screws and cylinders, three-phase motor 250 kW, dcrunner, screw speed: 300 rpm, degassing, 2x busch vacuum pump, side feeding Berstorff ZSFE 120 SO, metal separator, noise protection hood, ECON air granulating system ELG 3000, control: SIEMENS S7 with visualization. Up for a surcharge: extension to 40D possible

Compounding plant for fiberglass contaminant PE/PP Snail/LD 70/38 Material: PE, PP // Extruder with high-wear process unit (HIP), segmented screws and cylinders of 70 mm / 40D, AC-motor 260 kW,, degassing, continuous rotor, vacuum pump, pressure transducer, 4-fold dosing, 3+1-fold gravimetric dosing, side-dose PSF 46, strand head, water bath, strand granulator, temperature control unit, water cooler, material conveyer, Siemens S7 central control with visualization

Film recycling and granulation plant Material: PE, PP, // Cascade extruder, snail/LD x 220+150/ x 26D, drives 232 & 99 kW, water separator, hot tee with underwater cooling, only 8,500 operating hours

Material: PE, PP, PS // DC motor: 132 kW, power: approx. 300 - 500 KG/hr, screw 90mm, L/D30, strand nozzle, water bath, strand granulator.