plants used for sale

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 409399-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tr ...

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tra ...

High-pressure link pump with sliding ring seal - unused - (only one test run) self-priming, multi-stage Manufacturer: Dickow Type: HZS 1023 Built: 1986 Conveyor medium: Fuels Capacity: 60 m3/h Head: 60 m Power: 13.9 kW Temperature: 20C Application: Diesel - 3-stage pump of 60-120 m3 adjustable - impeller diameter 236 mm, - 1,450 rpm - EX-gun motor, 10.5 kW (Felton & Geom) General The self-priming, single- or multi-stage DICKOW link pump has been specially developed for the conveying of hydrocarbons in refuelling plants. HZS pumps are used in tank depots, for emptying tank wagons, filling high tanks, in hydrant systems at airfields, in airfields and many other applications where geodesic suction heights have to be overcome. The performance characteristic field has been graded in such a way that the most favourable efficiency is achieved in all application ...

Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in  ...

Used and new sea / maritime / transport containers permanently disposable ! For use as storage container and for transports (valid CSC approval). TECHNICAL DATA various types as 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open top (tarpaulin hood) - Flat Rack (open platform) - etc. also with valid CSC available. You can find the dimensions and weights on our website: abc.torlach.com INSPECTION Anytime possible in our warehouse TERM´S OF DELIVERY Ex works Freilassing, 83395 Germany, price incudes loading free on truck. SHIPMENT Worldwide shipment, delivery by truck/rail/ship anywhere and any anytime. Please send us your desired destination and terms for an offer. Do you have any questions We are at your service by below-mentioned contact details, please don´t hesitate to contact us! AlpsContainer Breslauer Str. 4 ...

Used and new sea containers permanently disposable ! For use as storage container and for transports (valid CSC approval). TECHNICAL DATA various types as 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open top (tarpaulin hood) - Flat Rack (open platform) - etc. also with valid CSC available. You can find the dimensions and weights on our website: abc.torlach.com INSPECTION Anytime possible in our warehouse TERM´S OF DELIVERY Ex works Freilassing, 83395 Germany, price incudes loading free on truck. SHIPMENT Worldwide shipment, delivery by truck/rail/ship anywhere and any anytime. Please send us your desired destination and terms for an offer. Do you have any questions We are at your service by below-mentioned contact details, please don´t hesitate to contact us! AlpsContainer Breslauer Str. 41a DE-83395 Freilassin ...

Garage Schalungensanlagen Rothmund / tar we offer two complete used garage formwork The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). A. garage formwork 2 Rothmund / tar and ueberarbeitet in 2004 by LAIER 5.62 X 2.78 m length and 2.95 x 6 as a fixed size, including ancillary units with spread rungsanlage to the higher level (B). Garage formwork 1 Rothmund special machines For 6 m, 6.5 m and 7 m garages, width 2.95 m set consisting of: 1.1 Set base frame, 2.1 retractable core with extension length adjustment 3.1 rear rollers wall 4.1 front rollers wall 5.2 Longitudinal walls 6.1 Set scope bracket 7.1 Set formwork for electric gate 8.1 Set hydraulic tensioner (down, sideways) 9.1 Set hydraulic system with control panel 10.1 electrical control cabinet Shaker drive 11 incl. auxiliaries (C). 15 Pallets for precast ga ...

Module formwork system EBAWE / Eilenburg we offer a used module formwork system (year 1996) The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). Plant for the production of space modules in the basic sizes 6000 x 2400 mm, the height can be varied from 2,850 3.100 mm. Thus, the maximum floor height is 3,250 mm. Technical description: Taktfertigung manufactured space cells made of reinforced concrete with at least one open long side without soil in different sizes. Window and door openings, as well as large-scale breakthroughs can be provided. The system consists of the following components: 1.1 Module formwork for the production of space modules) -is the form of Chamber for the production of concrete item (space cell) -The two sides are at the stationary side walls arranged swivel -Vibrators are attached to all w ...

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 60,000 litre single-wall insulated storage tank as follows. Rated capacity 60 cbm Piece 1 used but overhauled, i.e. the container is cleaned, externally insulated. Material steel, material S235JRG2 Documents Manufacturer's certificate / test certificate according to DIN and type plate Piece. Piece. 1 vent nozzle Piece. 1 filling nozzle Piece. Piece. Piece. 1 ladder Piece. Form. cylindrical storage container with feet/console Container dimensions Length approx. 12,680 mm plus insulation 100 ...

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 50,000 litre single-wall insulated storage tank as follows. Rated capacity 50 cbm Piece 1 used but overhauled, i.e. the container is cleaned, externally insulated. Material steel, material S235JRG2 Documents Manufacturer's certificate / test certificate according to DIN and type plate Piece. Piece. 1 vent nozzle Piece. 1 filling nozzle Piece. Piece. Piece. 1 ladder Piece. Form. cylindrical storage container with feet/console Container dimensions Length approx. 10,740 mm plus insulation 100 ...

We offer two Ford gas cogeneration plants for sale. Synchronous generator: Emod 19 KVA Engine: Ford Voltage: 230 / 400 3 phases Frequency: 50 Hz Speed: 1500 rpm COS phi: 0.8 Starter: 24 V Weight: 900 kg Year of construction: 1996 Hours of operation: 24,000

We offer for sale 2 Jenbacher cogeneration plants, type: JW312GSB. Motors are of the manufacturer of Stamford. Performance: 675 KVA. Both units are complete. One is easily broken. Hours of operation: approx. 55000 and 28000 At the operational unit, the generator was replaced and overhauled.

The fishing and packing plants have a simple and this stable and torsion-free construction. The machines are characterized by ease of use, flexibility, reliability and low maintenance requirements. The CAMBORIT clip has a capacity of up to 125 packs / min. 1 x 2 bottles can be packed with the CAMBORIT clip. To do this from flat so called "bars" cut to shaped, that get caught under the edge of the bottle. The machine can be operated automatically or manually. Display and operating elements are located on the control panel. All functions are controlled from the control panel and controlled. Errors of the cycle are displayed on the control panel. Action: At the beginning of production the magazine must first cut to be filled. The minimum level is cut to the magazine below, the machine will not turn on. After switching on the machine when existing minimum level of bottles with a capac ...

The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...

Why produce the smallest parts on large, expensive CNC machining centers when it handles a small CNC machine for a fraction of the price just as quickly and massively ? On this machine, an unskilled worker can insert and unmount the factory quilts ! You can reduce your own costs from 250 Euros to 40 Euro Hourly Rate for Small Parts production and thus be much more competitive ! DIN ISO G-Code Programming or data output of the Fraesbahnen 2D or 3D directly from the software. You reduce your operating costs extremely. Also available with rotary axis ! Several companies produce extruder screws, 3D molded parts made of aluminium, small parts made of brass or stainless steel for injection moulding plants, etc. for your production. We would be happy to advise you on brass, copper, steel, stainless steel and many other materials can be processed. view informations and obtain non-bind ...

The aspirator Wetzikon weather is 3 pieces in good condition, ready to use. It consists of intact plants, which have operated until now following machines: CNC machine Striebig vertical panel saw Planing machines Wide-belt sander Table circular saw Edge glue machine Moulding machine The exhaust system consists of 3 installations: 1 system with filter and 2 bag system 2 + 3 system with wooden box below and filter system various pipes and branches, 1 fan 3 HP, 1 fan 2 HP etc. Weight 350 kg Built in 1975 Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

GranitoGrav Photo-Gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, plaques, tiles, glass, mirror edible glass ... Just download your black and white or color photo as a template into the special module of the CAD-CAM software ConstruCAM-3D, then enter the output of the wuenengeed size and can then calculate the fraeswege. This file is then opened in the machine software and sent to the machine accordingly, ready ! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical timeandand creates your data with the CNC machine and the GranitoGrav photo module Grinding pins cost about 3- 4 euros per piece and hold ...

Cortina DS 3100, working range: 8,000 x 2,000 mm, built in Dec. 2004 CNC controlled cutting machine with sturdy bridge suspension, interlocking longitudinal drives and precise machined leadership profiles, supply voltage: 400 V 50 Hz, TN-S Network (§ / PE/N) Track width: 3100 mm Working width: 2000 mm Dead length: 1500 mm Total width: 3525 mm Operating side: left Power supply: right Fuel: Propane Including: OmniCom Explorer C drive 15 m / min DC Carrier for double-sided longitudinal drive on Schienenfüßen Machine cutting torch ALFA (with internal ignition) OmniFlow autogen supply (gas volume control up to 6 burner) OmniFlow control Burner suspension OmniLift 200 SensoMat ALFA SensoMat ARC/SR Plasma SetControl, tactile initial height determination Interlock for maximum of 2 plants HT 4400 HySpeed fine beam plasma cutting system Cutting up to 50mm power supply thro ...

100,000 litres of fire-fighting water tank - water tank - underground tank for underground storage, outside with bituminous insulation - needed - the container is emptied, cleaned and was factory-provided by us with a bitumen exterior painting Tank capacity: 100,000 litres / 100 m³ Length: approximately 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Material steel S 235 JRG 2 is a low-cost delivery with own trucks. Simply tell us the place of delivery, will receive the exact freight costs immediately. A tour is at any time possible by appointment only. If you need any more information, just give us a call or send us an email to info@barth-tank.de. Trade-in and purchase of tanks/containers is possible to do this, just talk it over us. As the European market leader, we maintain a large stock of over 3,000 above-ground and underground storage  ...

Machine type: friction washer / friction separator Manufacturer: NEUE HERBOLD GMBH Year of manufacture: NEW rotor diameter: 560 mm working length: 3000 mm Drive: 30 kW for integration in recycling processing plants - to wash plastic materials such as film flakes, foil chips, granules, PET bottle-flakes,...

Plasma cutting system for attachment/post-training CNC cutting and plasma cutting FineFocus 800 Plus Materialstaerke: up to 80 mm, hole stitching and quality cutting up to 45 - 50 mm, Gas console type PGE 3-800 (Kjellberg) - Description of the plasma cutting source (see appendix) Year of construction: Dec. 2005 (commissioning 2006) Condition as new (new price of the plant 46,327.70 EUR) Special price: 19,900 EUR + VAT ex works Bochum-Wattenscheid plasma cutting plants FineFocus 800or alternatively as FineFocus 1600 cutting up to 160 mm (see systems) plasma cutting systems FineFocus 800 and FineFocus 800/TWIN now with PLUS technology preferably for automated and mechanized cutting in connection with guide machines and robots on all electrically conductive materials; with or without vortex gas, also under water. cutting range up to a maximum of 80 mm material thickness (materi ...

Liescotherm heating system TG 04 No. 225724 and 225728 devices 58 KW Burner by Dr.B. Thyssen GmbH Type: IG50RN Manufacturer no. 6026 / 76 and 3136/77 L device adapted for natural gas H, operational group Year of construction: 1977 Decommissioning: 2005 Functionality is not known, the devices are offered as a spare part supplier. Can the proper dismantling and pick-up at the location The iron bridge 16, 65795 Hattersheim be made. We are happy to answer questions phone 06190-93449-0 There are 2 pieces, the plants can be visited by appointment. Price VB, make an offer. -> Note Please also our other ads < -. We can offer you several thousand square metres of used formwork, scaffolding and tools - ask us! (SoPo 410)

NANO FILTRATION PLANTS CAPACITY: FROM 5.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND PRE CONCENTRATION TO 20 % SOLID RATIO FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN

description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...

description: Type: MAN 2876 LE302 gas engine for combined heat and power Power: 190kWe/1,500 rpm Standard scope of delivery â?¢ Rows â 6 cylinder four-stroke â gas engine based on MAN â D28 â?¢ Single cylinder heads, high-alloyed valve seat rings and valves, form-forged crankshaft with counterweights, wet cylinder sockets, piston cooling over oil spray nozzles â?¢ Compression ratio 11:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with multi-cyclone oil separator, engine ventilation must be integrated on the customer side â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2,412 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal & ...

10 pcs. crane runway length approx. 9.5m long HEA 200/190 (s=6 mm) Crane rails 40 x 40 mm Accessories Available on request at an additional cost: - Circuit rail VAHLE Assembly On request, installation/assembly/recommissioning, also constructive changes (wingspan, hoisting unit, etc.), can of course be carried out by us in accordance with relevant regulations or with acceptance(s) throughout Europe. Visit A visit is possible at any time and at short notice, whereby the crane can also be tested under electricity if necessary. to ask? Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info.torlach EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with track connection and container loading ! - O ...

Belts - oil separators Oil separator with KUNSTSTOFFGURT OPV - 1 / OPV - 2 This group of oil separators is recommended for industrial applications. The collection in the standard version is made of plastic without connecting traces, which is adapted to the requirements, e.g. polymer, elastomer, etc. All parameters such as performance, bandwidth, and so on are selected individually. An oil lifting height of up to 15 m is particularly useful in deep tanks, e.g. sewage treatment plants. The number after the marking (300/500/700/1000 mm) is the working length of the strip - depth from the mounting base. Complete oil separator with PU polyurethane tape. Belt color: green (standard), blue or white. Maximum liquid temperature up to 60°C. We have oil separators with a stainless steel belt INOX with a working temperature of up to 100 ° C at an additional cost. Maximum liquid temperature ...

Screws station from the PV or solar industry, which gets just Aufwindabsolut as new ca 30 BetriebsstundenNeupreis for both plants, lt invoice 256.000,-€ to the mount out of so-called carrier frame inserts Graphitzum coat 2 stations in this range of solar modules for subsequent thermal treatment are Duennschichttechnologiees, are hardly separable, there is only a control or control cabinet for the whole SystemUnterlagen are available

Plants Panel

Steel platform with ladder, steel construction, machine platform, steel scaffolding used Manufacturer: EHINGER IMPIANTI Height to platform approx. 4.2 m + 1.1 m railing Pedestal 1.7 x 1.9 m Ladder with back protection Dimensions total approx. 1.7 x 2.7 x 5.3 m The system has already been dismantled. Any machines and devices that can be seen in the pictures are not part of the scope of delivery. We only offer the steel construction here. The construction was part of a glass recycling plant in which foam glass bulkowas was manufactured. We sell the complete plant with belt furnaces, cup plants, silos, crushers and mills. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Model SLP-15/O - available immediately! Memorized width 1200 x 1600 height x 1800 deep Dimensions 1720 width x 2410 height x 2100 deep Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta,  ...

Description Precise forming with quick tool changes. Our axial t form forming machines of type REB are specially suited with forming forces up to 1,300 kN and effortlessly master complex geometries. With up to six forming stages in combination with an intermediate clamping unit, they meet almost all requirements. The operation is simple and intuitive via touch panel. A sequence control makes every single movement of the respective forming stage user-friendly and individually freely programmable. Optionally, we equip our systems with electrical or hydraulic-numerical drives. For very short cycle times, these forming processes can be carried out step by step in transfer plants. The systems enable intuitive flow-based programming. Simultaneous axis movements ensure fast production processes and enable efficient and highly dynamic production. Technical data REB 660 6-60 mm . . .

Model SLP-15/O - available immediately! Memorized width 1200 x 1800 height x 1600 deep Dimensions 1720 width x 2610 height x 1900 depth Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Control: 7 "touch screen Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating ...

Offer via gebr. flexible shaft grinding machine SUHNER type Rotomax 3.5   - Lightweight and compact design - Stable high-performance motor and infinitely variable torque adjustment - Wide range of shafts and tools - Control from the handpiece by optional manual shutdown   Three-phase motor for 3-phase alternating current Protection class IP 44 Overload Power consumption 3.5 kW Voltage 400 V, 50 Hz Idle speeds Connection DIN 15: 500-10,000 min-1 Anschluss ‪DIN 10‬: 500–25.000 min–1 Speeds infinitely adjustable Mobile   Applications: Grinding, cutting, roughing, rusting, polishing, brushes, etc. For heavy work in foundries, in boiler and steel construction, in mechanical Workshops, stainless steel processing plants

Unused gearboxes, angular gearboxes, partly without electric motors, partly with electric motors. Manufacturers e.g. PWH Plants + Systems GmbH These types and others pre-raetig: 1. PWH 90KW Type K2SZG250 n1=1500 rpm n2= 75 rpm i=20 P=90 KW Length over everything: 120cm Width over all approx. 55cm Height approx. 56cm Diameter of shaft rear (lies laengs) 45mm Transducer of the shaft front (lies transverse) outside 160mm Transducer of the shaft front (lies transversely) inside 140mm Weight-cooked 1,000kg 2. PWH 45KW Type KSZG200 n1=1470 rpm n2= 73.5 rpm i=20 P=45 KW All over: 94cm Pq7hwm Width over all approx. 45cm Height approx. 46cm Diameter of shaft rear (lies laengs) 50mm Transducer of the shaft front (lies transverse) outside 150mm Transducer of the shaft front (lies transverse) inside 120mm, passage 100mm Weight-cooked 600kg 3. PWH 37KW Type KSZG180 ...

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Baut ...

Polystyrene shredders for EPS waste and other materials made of polystyrene – EPS specifications: Electric motor: 5.5 Kw/380 V Speed: 120 rpm. Weight: approx. 1800 kg Dimensions: 2030x1100x1550 mm Throughput: up to approx. 25 m³/hour Insertion opening: 1500×600 mm Granule size: up to approx. 50 mm Throughput depends on the material and size of the sieve. PLANTS and SYSTEMS for SHREDDING EPS WASTE (no longer usable polystyrene expands, polystyrene) – STYRO-CUT® EPS is a hard plastic material. It is mass-reduced and has good mechanical properties. In the EPS block of 1 m³ volume, there is about 98% air in 3-6 million closed cells, which is why EPS works as a remarkable heat insulator. The plant was developed for the processing of smaller quantities of polystyrene, as well as systems for the mass processing of EPS waste. Such granules can be used: in n ...

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

Professional steel shears for tin locksmiths, assembly plants, Teaching work pieces, particularly stable construction stable application with shear encoder made of encoded steel tooth lever translation lever securing via rotary spring knives made of high-quality tool steel, hoisted and ground continuously adjustable holder cuts of sheets, flat steel steel mm: 18 knife length mm: 175 Net weight kg: 47.5 room requirements approx.0.5x0.25x2 m; ready for use

We offer as follows: 2 pieces Jenbacher CHP type JMS 316 GS-C21 Generator: inchAVKinch 1110 kVA Technical data: Engine power approx. 1922kW electrical power: approx. 736kW electrical efficiency approx. 38.3% Thermal power: approx. 912 kW Thermal efficiency: approx. 46.9% Built: 2000 The plants sing needed. The sale is subject to any warranty.

100,000 litre rain water tank - rainwater cistern, underground tank for underground storage, outside with bituminous insulation - used - The container is emptied, cleaned and was factory-provided by us with a bitumen exterior painting Tank capacity: 100,000 litres / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: steel S 235 JRG 2 Delivery with our own trucks. Simply tell us the place of delivery, you will receive the exact freight costs immediately. You can visit us at every time, just let us know and we will find a suitable date! If you need any more information, just give us a call or send us an email to info@barth-tank.de. We also buy your tanks which are not needed anymore and we also accept your used tanks as a trade-in. As the European market leader, we maintain a large stock of over 3,000 above-ground and ...

SUMAB Smallest Automatic concrete plant SUMAB MINI The SUMAB MINI is a perfect match for you whether you produce concrete for your own project or need material to produce concrete elements. Technical details: • Easy to put it inside the building and build your concrete element factory. • Designed on a container frame. • 2 aggregate storages, • pan-mixer 500/300 liters. • Water tank 200 liters. • Automatic control of a plant: computer (20 concrete recipes). Concrete plants made by SUMAB are the definition of quality, durability and reliability. Our batching plant are made using Scandinavian technology and components from leading European manufacturers! We offer Scandinavian quality at the best price! If you need more information, you can visit our website, or send a request and we’ll help find the best solution for you!

Description Filler Handtmann model VF300 is a computer controlled vacuum filler offering very high performance with innovative technical solutions applied. Model VF300 is ideal for the production of meat products and find it applies in large and small manufacturing plants. The device is a very accurate-allows you to achieve the highest quality of the product. Handtmann applied in your device pneumatic lift mechanism for automatic loading. Specification: Brand: Handtmann Model: VF300 Volume: 300 L Dimensions: 2030 x 1750 x 1400 (mm) Power supply: 400V 50 Hz 3N Power: 6.5 kW

K-280 sharpener is a device thanks to which you can professionally sharpen various types of grinder knives and plates in your plant. The sharpener is fully automated. The built-in programmer allows the user to program parameters such as time, thickness of cut and tempo. The device has a magnetic holder built-in. The machine perfect for meat processing plants and the meat industry. Specification: Producer: BMG TRADE Model: K280 Dimensions: 1150 x 570 x 625 (mm) Power supply: 400V 50Hz Total motor power: 2.67 kW Cooling pump power: 0.12 kW Rotation: 2860 rpm Tank capacity: 33 L Thickness of cut: 0.2mm; 0.4mm; 0.8mm; 1.2cm; 1.6cm; 2,00cm Program of grinding pace Rotation: Right / left Weight: 250 kg

We rent and sell storage containers, shipping containers, site containers, overseas container, double Office container plants. Offering transport possible - please contact us. Visits by appointment possible. Check our other offers.

We are looking urgently All diesel MTU 16V4000 generator or just motors to export Search for up to 6 plants in each execution

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

Offer 7 paint mixing buckets mixing tank agitator tank Drais 300 l rollable (for e.g. Drais color mixing unit (dissolver) type RN 218) Fig. 1-7 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories for the Drais-Farbmischwerk type RN 218 (sold). Technical data (partly estimated or from reference plants): Manufacturer: Drais Designation: Paint mixing bucket Mixing tank Agitator tank Year of construction: probably 1985 Material: sheet steel Inner diameter: 80 cm Height: 80 cm (overall) Weight: approx. 130 kg Quantity: 7 pieces with paint residues. Also available in parts for 290€/piece. further assets from this plant: -for material separation centrifuge SZB0 1000C 960 1/min 6 loads/h The centrifuge was part of a wallpaper production plant. After cleaning the tools, it is used to separate the plastisol from the  ...

We rent and sell storage containers, shipping containers, site containers, overseas container, double Office container plants. Offering transport possible - please contact us. Sample images - sightseeing by appointment possible. Check our other offers.

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...