1 used tracked mobile screener type Powerscreen-Turbo Chieftain 1400, built in 2003, with cable remote control, spare rollers, etc.

Type (EP) -- Bandwidth (mm) -- Length (m) 800/4 5+2 -- 1.000 -- 524 800/4 5+2 -- 1.000 -- 579 800/4 5+2 -- 1.000 -- 262 800/4 5+2 -- 1.000 -- 401 800/4 5+2 -- 1.000 -- 103 800/4 5+2 -- 1.000 -- 229 800/4 5+2 -- 1.000 -- 244 400/3 -- 1.000 -- 28 800/4 5+2 -- 1.000 -- 220 800/4 5+2 -- 1.000 -- 220 800/4 5+2 -- 1.000 -- 315 800/4 5+2 -- 1.000 -- 401 800/4 -- 1.000 -- 192 800/4 5+2 -- 1.000 -- 640 800/4 5+2 -- 1.000 -- 340 ? -- 1.000 -- 220 ? -- 1.000 -- 400 ? -- 1.000 -- 37 ? -- 1.000 -- 90 ? -- 1.000 -- 100 800/4 5+2 -- 1.000 -- 432 500/4, 5+2 -- 1.000 -- 71 - Conveyor belts of different lengths - All with strip width (BB) = 1,000 mm - Individual purchase also possible - Partly as good as new

TECHNICAL SPECIFICATIONS Designation: Discharge belt Version: stationary Axle distance: 6,000 mm Belt width: 1,200 mm Year of construction: 2006 Drive power: 15 kW Drive type: Plug-on gear motor Support: free supporting structure Catwalk: not available Handover: Transfer hood Belt tension: Tensioning carriage Galvanized version: yes SPECIFIC COMMENT - Exhaust conveyor belt with close upper belt stations - No trough angle / straight load flow

TECHNICAL SPECIFICATIONS Manufacturer: GHH Designation: Double toggle jaw crusher Design: Heavy duty version Type: 86 Year of construction: 1968 Throughput: 45 - 55 cbm/h at crushing gap 80 - 100 mm Inlet opening: 800 x 630 mm Maximum feed size: approx. 450 mm Drive power: 112 kW Weight: 27.000 kg SPECIFIC COMMENT Complete semi-mobile system consisting of: - GHH double toggle jaw crusher - Feed funnel - Plate tape 1,000 x 5,000 mm - Plaster tape (under the plate tape) 800 x 8,000 mm - Solid steel construction ---------------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: GHH Description: Double toggle jaw crusher Version: Heavy duty version Type: 86 Year of construction: 1968 Throughput capacity: 45 - 55 cbm/h with crushing gap 80 - 100 mm Feed opening: 800 x 630 mm Maximum feed size: approx. approx. 450 mm Drive power ...

TECHNICAL SPECIFICATIONS Manufacturer: BINDER+CO Designation: BIVITEC clamping shaft screen Type: LIV/ED 2600x8 Design: Dry sieving Number of screen decks: 1 Year of construction: 2005 Screen length: 8,000 mm Screen width: 2,600 mm Weight: approx. 16.5 t SPECIFIC COMMENT - Incl. drive - Incl. supports ------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: BINDER+CO Description: BIVITEC Flip Flow Screen Type: LIV/ED 2600x8 Version: Dry screening Number of screen decks: 1 Year of construction: 2005 Screen length: 8,000 mm Screen width: 2,600 mm Weight: approx. approx. 16.5 t SPECIFIC COMMENT - Incl. drive unit - Incl. supports

TECHNICAL SPECIFICATIONS Manufacturer: MOGENSEN Designation: Stangensizer / Stangenrost Type: DX3527 Year of construction: 1994 Version: Two-deck Clear length: 3,500 mm Clear width: 2,300 mm Total height: 2,750 mm Rod diameter above: 70 mm Rod diameter bottom: 40 mm Top gap distance: 216 mm Gap distance below: 330 mm SPECIFIC COMMENT - Reappraisal 2020, since then unused - Robust construction - Ideal for coarse separation

TECHNICAL SPECIFICATIONS Manufacturer: BROWN LENOX Designation: KUE KEN Jaw Crusher Type: 106 Design: Double toggle jaw crusher Year of construction: 1982 Inlet opening (width/depth): 1065 x 305 mm Gap width: 38 - 75 mm Throughput: 65 - 110 t/h Maximum feed size: 240 mm Drive power: 55 kW Crushing speed: 300 - 350 rpm Total weight: 10,200 kg SPECIFIC COMMENT - Solid crusher construction with steel support

TECHNICAL SPECIFICATIONS Manufacturer: FAM Designation: Walzenmühle Type: 1004 H Year of construction: 1996 Machine size: 1004 Roller diameter: 1,000 mm Roller width: 400 mm Roller speed: n = 122 1/min Roller circumferential speed: v = 6.4 m/s Machine V-belt pulley: ∅ 800 mm Transmission V-belt pulley: ∅ 400 mm Drive power: 2 x 22 kW, 233 1/min, 400/690V Drive type: SEW gear motor R 102 DV 180 L4 TF Total weight: 8.9 t Materials Roller jacket: G-X 110 MnCr 18.2 Wear plates: Hardox 400; 20 mm Material guidance: Hardox 400; 15 mm SPECIFIC COMMENT - Including hydraulic unit and control - Previous service life approx. 5 years

Impact crusher Pozzato 8-5-3 Machine width 500 mm Rotor diameter 800mm, 3 impact bars Capacity up to 40 t/h Feed size approx. 50 mm Sand content in the crushing product up to 50% Machine on base frame Older year of construction with very few operating hours

TECHNICAL SPECIFICATIONS Manufacturer: HAZEMAG & EPR GmbH Description: Impact Roller Crusher Type: SB 1315R Year of construction: 2013 Design: driveless crawler chassis Operating hours: approx. 12,000 h Throughput: 600 t/h Bunker load: max. 80 t Feed grain: 0 - 1,200 mm Final grain: 0 - 250 mm Infeed width: 1,510 mm Inlet height: 1,670 mm Roller diameter: 1,300 mm Roller speed: 300 1/min Roller drive power: 250 kW Conveyor drive power: 2 x 55 kW Length chain conveyor: approx. 15,000 mm Light range chain conveyor: 1,200 mm Dimensions of the entire system (L x W x H, approx.): 23,500 x 6,700 x 5,700 mm Total weight: 110,000 kg (incl. tax container) SPECIFIC COMMENT - Mobile primary crusher plant for soft to medium-hard rock - low-precision comminution (designed for limestone) - Incl. 1 pc. gebr. Set of scratching irons with chain - Incl. control container If  ...

TECHNICAL SPECIFICATIONS Manufacturer: SBM Basic Construction / SANDVIK Crusher Designation: Crawler mobile pre-crushing system Version: With SANDVIK double roller crusher Year of construction: 2016 Throughput: 1,000 t/h Total weight: 230,000 kg Operating mode: Hand/Automatic Mains voltage: 3400 V (AC), main switch 1000A Controller: - Control cabinet with enclosure - Incl. control with visualization - Incl. error display with operator panel COMPOSED OF 1) Feed bunker Dimensions (LxW): approx. 4.5 x 6.0 m Content: approx. 30 cbm 2) Record tape Type: PA 18 x 9.5 m Version: with crawler chain Plate width: 1,800 mm Plate tape length: 9.5 m Drive power: 90.0 kW (2 x 45.0 kW) 3) SANDVIK Double Roller Crusher Type: Hybrid CR810/12-20 Roll diameter: 1,200 mm Roll length: 2,000 mm Drive power: 2 x 200 kW (direct drive) Throughput: 1,000 - 1,200 t/h Total weight ...

Henke brick system for DF bricks, with complete circulation, palletizer, strapping, lifting and lowering ladder, trolley, hardening chamber, 2000 boards as new, approx. 10 shapes, armor plate tape, etc. fully functional, immediately available from location

Split sieve coverings for an IFE dewatering screening machine 1 pcs L 500 mm x W 800 mm gap 0.3mm 1 pcs L 1000 mm x W 800mm gap 0.3 mm 2 pcs L1000mm x W 800 mm gap 0.3 mm 3 pcs L1000mm x W 800 mm gap 0.3 mm 5 pcs L1000mm x W 800 mm gap 0.3 mm The pads are unused or only in use for a short time

Screening machine large, Terra St used, overhauled

Conveyor belt tensioning drum with shaft Diameter 830mm Drum width 1300 mm for conveyor belt 1200 mm

Flender drive gearbox from a tunnelling conveyor belt mill Gearbox, output speed approx. 44 rpm (1.5 m/s with drum diameter 630mm) Drive motor 75 kW Turbo clutch

with 14 shapes with 14 Forms

2 cyclones as good as new Type AKA VORTEX Twin TRT 4118 Throughput per twin 95m3/h total 190m3/h Diameter 200mm, cutting cut approx. 50my 1 pcs new cyclone Type AKA Vortex KRS3128 II 40m3/h DM 150 mm All cyclones including overflow line and shut-off valve If required, a refurbished PUMP METSO VASA is also available Drive 30 kW available are also handed in individually

High-performance fine cone crusher Calibrator 1600/300 H III

This machine can be considered as an ultimate solution for the production of concrete elements providing the one to choose numerous options as an additional upgrade to the machine that can make production even more efficient: Filling box on servo drives Filling boxes both from the coarse mix and face mix powered with 2 servo motors create fast movement back and forth contributing reliable filling of the mould. As for the coarse mix device filling box it is additionally equipped with an agitator (driven by the hydraulic cylinder) for equal and fast filling. Servo vibration Hi-dynamic Servo vibration system transmits power for the high compaction with the just right consumption of electrical power to vibration table consisted of impact and ledge bars and thus providing top-quality paving stones, blocks, curbstones as well as any other products which modern demanding market require ...

Pre-breaker with crusher Suitable for soft lime, marl, coal Power up to 200- 600 t/h Task size up to 1500mm Drive - electric transformer station 30kV/400V Drive power approx. 500 kVA Plant weight approx. 130 tons Task bunker 25m3 Chain conveyor Roller rust Schlagwalzenbecher Deduction tape Dust removal system Caterpillar suspension - not self-driving Conveyor belt 3 x 40m Telestack, self-driving, belt width 1200mm Immediately available

Compact filter plant McCloskey new! Screening plant for the GALA of construction, agriculture Mobile system area ca 2 m2 2 screen decks

FINLAY / TEREX 390 HydraScreen, screen / screening, Deutz engine, including additional belts, German Machine, 5.150 h, year 1996

2 PCs unused humidity probes for mixer Original spare parts for a love Mr of ZE 2000

New engine Scania DC13-072A with Starter without altenator available for genset operation in chrusher immediately at stock Zeven/Germany Phone:0049 4281 950583 fax :0049 4281 950585 infoatmiw-zeven.de abc.miw-zeven

Euroblock 12 movable block machine offers a very wide production range of concrete products. It can be used as a universal machine as well as special product making machine. This multi-purpose block machine can be used for the production of: Hollow blocks Chimney blocks Hourdy blocks Insulated blocks Garden blocks Solid blocks Curbstones Paving stones with or without face mix Layers separated by plastic foil or by sand. With its standard safety devices, rigid frame construction that allow heavy duty use, and simplicity of design that reduce maintenance to a minimum, this machine is the most economical choice for a very wide range of concrete products manufacturers. Useful area: 1290 x1130 mm (product height 170 ? 250 mm) Useful area: 1290 x900 mm (product height 250 ? 500 mm)

Design of PRO 1000 concrete products machines put this machine beside most flexible in the world. The most versatile machines in their class, the PRO machine series offers the largest variety of handling and cubing systems available. By upgrade of handling the equipment on the wet and dry line side, the capacity of complete installation can be increased significantly. Double layer products are easily produced with and optional face mix device. Pallet size: 1400 x950 mm Useful area: 1350 x850 mm Paving stones 10x20x6 cm Production capacity in 8h 1355m2 Hollow block 20x20x40 cm Production capacity in 8h 17280 pieces

With PRO 400 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with RHP series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO machines are working with hi-efficiency vibration system named SYNCHROTRONIC VIBRATION. Vibrators driven with frequency regulators enables the operator to adjust the frequency during machine cycle providing hi-speed mould feeling and final product compaction. The rigid mechanical structure of the vibrating table and vibrators ensure hi durability and low maintenance. PRO 400: • Production board s ...

Four nearly new moulds for garden wall and fence.

BRICK FACTORY, RED BRICK, CLAY BRICK PLANTS - second hand, used, We offer also DE montage and Montage. Also control renewing. Porenbetonwerk, Kalk Sandstein Werk, Dachziegelwerk, Ton Ziegelwerk, Aerated concrete plant, Lime sandstone factory, calcium silicate blocks, Roofing tile works, Clay brick plant, ERICH PETER MACHINES-PLANTS GMBH A-7083 Purbach Hofgartengasse 7 Phone: +43 664 3358378 Mail: office@machines-plants.at Web: www.machines-plants.at