Autoclaved Aerated Concrete AAC Production Line, Porenbetonwerk, Aerated concrete plant, ERICH PETER MACHINES-PLANTS GMBH A-7083 Purbach Hofgartengasse 7 Phone: +43 664 3358378 Mail: office@machines-plants.at Web: www.machines-plants.at

Year of construction 2018, with Volvo TAD 754 GE 260 kw engine, 3730 h, with screening plant, oversize grain recirculation, magnetic separator, hyd. foldable side belt for pre-screening

Four nearly new moulds for garden wall and fence.

BRICK FACTORY, RED BRICK, CLAY BRICK PLANTS - second hand, used, We offer also DE montage and Montage. Also control renewing. Porenbetonwerk, Kalk Sandstein Werk, Dachziegelwerk, Ton Ziegelwerk, Aerated concrete plant, Lime sandstone factory, calcium silicate blocks, Roofing tile works, Clay brick plant, ERICH PETER MACHINES-PLANTS GMBH A-7083 Purbach Hofgartengasse 7 Phone: +43 664 3358378 Mail: office@machines-plants.at Web: www.machines-plants.at

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of ...

with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT

Sumab 750, 30-120 t/h. (Sweden). Mobile crusher on a caterpillar chassis with a magnetic block for sorting metal. Jaw Crusher - 700x500mm Entry with Single Jaw (28" x 20") Grooved cheeks 6 tons (2700 pounds) Hydraulic wedges with spring rod lock and reverse Drive function Electric motor 45 kW (60 HP) V-belt and drive pulley Hopper - 3-sided reinforced construction, Hardox lining Conveyor - Double electric drive 1.5 kW (2pcs. 2HP) Magnet - electric drive 1.5 kW (2 HP) Controls: Electric control panel with push buttons with contactors and relays Remote Wireless remote control to stop/start the feeder Controls - Electric control panel with push buttons with contactors and relays Plant capacity - fraction size / tons per hour 40 mm - 30-40 t/h 50 mm - 45-50 t/h 60 mm - 45-65 t/h 70 mm - 55-75 t/h 80 mm - 70-90 t/h 90 mm - 80-100 t/h 100 mm - 90-120 t/h

Our company currently offers the R-1000 stationary concrete block machine. The SUMAB R-1000 is one of the most technologically advanced machines on the market! A giant among all block machines! Real money maker! Using a SUMAB R-1000, you can produce the following products: • Empty blocks • Curb stones • Paving stone • Tiled stone Technical details: • CAPACITY - 1000 m2 pavers per shift. • BLOCKS 20X20X40 18000 pieces/8 h Scandinavian quality and good prices! Contact us for pricing and technical specs! We will provide you with the best solution for your business projects!

Stationary block machine SUMAB R-500 – automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated). Working pallet dimension: 1400 x 700 mm. Useful area Max.: 1250 x 650 mm. With stationary block making machine Sumab R-500 following concrete products are produced on efficient way: hollow blocks, insulated blocks, paving stones, curbstones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm) For more information, please send a request.

New engine Scania DC13-072A with Starter without altenator available for genset operation in chrusher immediately at stock Zeven/Germany Phone:0049 4281 950583 fax :0049 4281 950585 infoatmiw-zeven.de abc.miw-zeven

TECHNICAL SPECIFICATIONS Designation: Discharge belt Version: stationary Axle distance: 6,000 mm Belt width: 1,200 mm Year of construction: 2006 Drive power: 15 kW Drive type: Plug-on gear motor Support: free supporting structure Catwalk: not available Handover: Transfer hood Belt tension: Tensioning carriage Galvanized version: yes SPECIFIC COMMENT - Exhaust conveyor belt with close upper belt stations - No trough angle / straight load flow

TECHNICAL SPECIFICATIONS Manufacturer: FAM Designation: Walzenmühle Type: 1004 H Year of construction: 1996 Machine size: 1004 Roller diameter: 1,000 mm Roller width: 400 mm Roller speed: n = 122 1/min Roller circumferential speed: v = 6.4 m/s Machine V-belt pulley: ∅ 800 mm Transmission V-belt pulley: ∅ 400 mm Drive power: 2 x 22 kW, 233 1/min, 400/690V Drive type: SEW gear motor R 102 DV 180 L4 TF Total weight: 8.9 t Materials Roller jacket: G-X 110 MnCr 18.2 Wear plates: Hardox 400; 20 mm Material guidance: Hardox 400; 15 mm SPECIFIC COMMENT - Including hydraulic unit and control - Previous service life approx. 5 years

TECHNICAL SPECIFICATIONS Manufacturer: MOGENSEN Designation: Stangensizer / Stangenrost Type: DX3527 Year of construction: 1994 Version: Two-deck Clear length: 3,500 mm Clear width: 2,300 mm Total height: 2,750 mm Rod diameter above: 70 mm Rod diameter bottom: 40 mm Top gap distance: 216 mm Gap distance below: 330 mm SPECIFIC COMMENT - Reappraisal 2020, since then unused - Robust construction - Ideal for coarse separation

TECHNICAL SPECIFICATIONS Manufacturer: ROHR GmbH Designation: friction drum Type: Hurricane HS-5 Year of construction: 2000 Throughput: 50 - 100 t/h Drive power rotor outside: 55 kW Drive power rotor inside: 90 - 132 kW Drum diameter: 1,800 mm Drum length: 3,100 mm Weight: 20.410 kg SPECIFIC COMMENT - For polishing, grinding, cleaning and rounding aggregate

TECHNICAL SPECIFICATIONS Manufacturer: Weserhütte Description: Double Knee Lever Jaw Crusher Type: DBS1200x960 Year of construction: 1979 Version: Heavy version for hard rock Drive power: 110 kW Flywheel diameter: approx. 2,400 mm Inlet opening (width x height): 1,200 x 960 mm SPECIFIC COMMENT - Incl. pusher SW1250x4000 - Incl. stepped grate with pre-screening - Incl. control unit TECHNICAL SPECIFICATIONS Manufacturer: Weserhütte Description: Double toggle jaw crusher Type: DBS1200x960 Year of manufacture: 1979 Version: Heavy duty for hard rock Driving power: 110 kW Flywheel diameter: approx. 2,400 mm Inlet opening (width x height): 1,200 x 960 mm SPECIFIC COMMENT - Incl. step grate with pre-screening - Incl. control unit If you are interested please let us know, we appreciate to send you a detailed quotation. EuroConsult Dimitrios Piretzidis

TECHNICAL SPECIFICATIONS Designation: Conveyor belt Version: stationary Axle distance: 12,000 mm Belt width: 1,200 mm Drive power: 7 kW Drive type: Plug-on gear motor Support: free supporting structure Catwalk: not available Belt tension: Tensioning carriage Galvanized version: yes

TECHNICAL SPECIFICATIONS Designation: Conveyor belt Version: stationary Axle distance: 8,000 mm Belt width: 1,000 mm Year of construction: 2005 Drive power: 7 kW Drive type: Plug-on gear motor Support: free supporting structure Catwalk: not available Handover: Transfer hood Belt tension: Tensioning carriage Galvanized version: yes

COMPOSED OF: 1 x Rotor Remanufactured + balanced+ equipped 2 x Rotor (need to be refurbished) 1 x Clamping device for balancing 9 x Impact strips (Large) 6 x Impact bar (small) 2 x Enema cone 3 x tear-off edge various rotor protection plates CONSISTING OF: 1 x Rotor newly reconditioned + balanced+ fitted 2 x Rotor (must be reconditioned) 1 x Clamping device for balancing 9 x Blow bars (large) 6 x Blow bars (small) 2 x Inlet cone 3 x Tear-off edge Various rotor protection plates

TECHNICAL SPECIFICATIONS Manufacturer: BINDER+CO Designation: BIVITEC clamping shaft screen Type: LIV/ED 2600x8 Design: Dry sieving Number of screen decks: 1 Year of construction: 2005 Screen length: 8,000 mm Screen width: 2,600 mm Weight: approx. 16.5 t SPECIFIC COMMENT - Incl. drive - Incl. supports ------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: BINDER+CO Description: BIVITEC Flip Flow Screen Type: LIV/ED 2600x8 Version: Dry screening Number of screen decks: 1 Year of construction: 2005 Screen length: 8,000 mm Screen width: 2,600 mm Weight: approx. approx. 16.5 t SPECIFIC COMMENT - Incl. drive unit - Incl. supports

TECHNICAL SPECIFICATIONS Manufacturer: GHH Designation: Double toggle jaw crusher Design: Heavy duty version Type: 86 Year of construction: 1968 Throughput: 45 - 55 cbm/h at crushing gap 80 - 100 mm Inlet opening: 800 x 630 mm Maximum feed size: approx. 450 mm Drive power: 112 kW Weight: 27.000 kg SPECIFIC COMMENT Complete semi-mobile system consisting of: - GHH double toggle jaw crusher - Feed funnel - Plate tape 1,000 x 5,000 mm - Plaster tape (under the plate tape) 800 x 8,000 mm - Solid steel construction ---------------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: GHH Description: Double toggle jaw crusher Version: Heavy duty version Type: 86 Year of construction: 1968 Throughput capacity: 45 - 55 cbm/h with crushing gap 80 - 100 mm Feed opening: 800 x 630 mm Maximum feed size: approx. approx. 450 mm Drive power ...

Type (EP) -- Bandwidth (mm) -- Length (m) 800/4 5+2 -- 1.000 -- 524 800/4 5+2 -- 1.000 -- 579 800/4 5+2 -- 1.000 -- 262 800/4 5+2 -- 1.000 -- 401 800/4 5+2 -- 1.000 -- 103 800/4 5+2 -- 1.000 -- 229 800/4 5+2 -- 1.000 -- 244 400/3 -- 1.000 -- 28 800/4 5+2 -- 1.000 -- 220 800/4 5+2 -- 1.000 -- 220 800/4 5+2 -- 1.000 -- 315 800/4 5+2 -- 1.000 -- 401 800/4 -- 1.000 -- 192 800/4 5+2 -- 1.000 -- 640 800/4 5+2 -- 1.000 -- 340 ? -- 1.000 -- 220 ? -- 1.000 -- 400 ? -- 1.000 -- 37 ? -- 1.000 -- 90 ? -- 1.000 -- 100 800/4 5+2 -- 1.000 -- 432 500/4, 5+2 -- 1.000 -- 71 - Conveyor belts of different lengths - All with strip width (BB) = 1,000 mm - Individual purchase also possible - Partly as good as new

TECHNICAL SPECIFICATIONS Manufacturer: SBM Basic Construction / SANDVIK Crusher Designation: Crawler mobile pre-crushing system Version: With SANDVIK double roller crusher Year of construction: 2016 Throughput: 1,000 t/h Total weight: 230,000 kg Operating mode: Hand/Automatic Mains voltage: 3400 V (AC), main switch 1000A Controller: - Control cabinet with enclosure - Incl. control with visualization - Incl. error display with operator panel COMPOSED OF 1) Feed bunker Dimensions (LxW): approx. 4.5 x 6.0 m Content: approx. 30 cbm 2) Record tape Type: PA 18 x 9.5 m Version: with crawler chain Plate width: 1,800 mm Plate tape length: 9.5 m Drive power: 90.0 kW (2 x 45.0 kW) 3) SANDVIK Double Roller Crusher Type: Hybrid CR810/12-20 Roll diameter: 1,200 mm Roll length: 2,000 mm Drive power: 2 x 200 kW (direct drive) Throughput: 1,000 - 1,200 t/h Total weight ...

TECHNICAL SPECIFICATIONS Manufacturer: HAZEMAG & EPR GmbH Description: Impact Roller Crusher Type: SB 1315R Year of construction: 2013 Design: driveless crawler chassis Operating hours: approx. 12,000 h Throughput: 600 t/h Bunker load: max. 80 t Feed grain: 0 - 1,200 mm Final grain: 0 - 250 mm Infeed width: 1,510 mm Inlet height: 1,670 mm Roller diameter: 1,300 mm Roller speed: 300 1/min Roller drive power: 250 kW Conveyor drive power: 2 x 55 kW Length chain conveyor: approx. 15,000 mm Light range chain conveyor: 1,200 mm Dimensions of the entire system (L x W x H, approx.): 23,500 x 6,700 x 5,700 mm Total weight: 110,000 kg (incl. tax container) SPECIFIC COMMENT - Mobile primary crusher plant for soft to medium-hard rock - low-precision comminution (designed for limestone) - Incl. 1 pc. gebr. Set of scratching irons with chain - Incl. control container If  ...

TECHNICAL SPECIFICATIONS Manufacturer: GFA Name: Banana sieve Type: 1P 4000/1800 Design: Dry screening, stationary Year of construction: 1994 Throughput: approx. 80 t/h Sieve dimensions (length/width): 4,000 x 1,800 mm Separation deck 1 at: 2 mm (Isenmann) Weight: approx. 7,000 kg Drive power: 7.5 kW TECHNICAL SPECIFICATIONS Manufacturer: GFA Description: Banana screen Type: 1P 4000/1800 Version: Dry screening, stationary Year of construction: 1994 Throughput: approx. 80 t/h Screening dimensions: 4,000 x 1,800 mm Separation deck 1 at: 2mm (Isenmann layer) Weight: approx. 7,000 kg Drive power: 7.5 kW

TECHNICAL SPECIFICATIONS Manufacturer: IBAG Designation: Horizontal sieve Type: 5500 x 2000 Design: 2-piece longitudinal tensioner Number of screen decks: 2 Year of construction: 1974 Screen covering: Steel screen mesh Weight: approx. 7 t Drive cable: no drive available SPECIFIC COMMENT - Incl. outlet tray and trigger belt (if desired) - Incl. approx. 30 steel screen coverings - Robust steel construction If you are interested, we can send you an offer with photos. EuroConsult Dimitrios Piretzidis TECHNICAL SPECIFICATIONS Manufacturer: IBAG Description: Horizontal screen Type: 5500 x 2000 Design: 2-piece longitudinal tensioner Number of screen decks: 2 Year of manufacture: 1974 Screen deck: steel screen cloth Weight: approx. 7 t Drive: no drive available SPECIFIC COMMENT - Incl. discharge trough and discharge conveyor (if required) - Incl. approx.  ...

TECHNICAL SPECIFICATIONS Manufacturer: SIMATEC Designation: Circular vibrating screen Design: dry screening / wet screening Type: KRS 24/60 Number of screen decks: 2.5 Year of construction: approx. 2015 Drive cable: 30 kW Feed capacity: approx. 250 t/h Dimensions screen area (length/width): 6,000 x 2,400 mm Screen area: 12.6 sqm EXISTING SCREEN MATS (included) Complete synthetic covering consisting of: - 7 x 7 mm - 20 x 14 mm - 40 x 40 mm - 2 x 2 mm SPECIFIC COMMENT - Slightly used machine in very good condition - Ideal for dry sieving and wet sieving - Incl. springs, swinging blocks and accessories

TECHNICAL SPECIFICATIONS Manafacture: GFA Designation: inclined circular vibrating screen Type:1P 5000/2000 Number of screen decks: 1 pc. Year of construction: 1992 Drive cable: 11 kW Feed capacity: approx. 80 t/h Dimensions (length/width): 5,000 x 2,000 mm Screening area: 10 sqm Screen lining deck 1: metal and synthetic SPECIFIC COMMENT - Good technical condition

TECHNICAL SPECIFICATIONS Manufacturer: BÖHRINGER Designation: Stepped grate Grate length: 2,000 mm Grating width: 1,100 mm Design: heavy Grate gap/screening at: 120 mm Number of gradations: 3 SPECIFIC COMMENT - Incl. drive - Incl. swing frame and springs

TECHNICAL SPECIFICATIONS Manufacturer: KRUPP / KLEEMANN REINER Designation: Impact crushing plant and screening unit Design: semimobile, screw construction Year of construction: 1996 Complete treatment plant consisting of: Item 01) FEED BUNKER Bunker capacity: approx. 6 cbm Bunker insertion width (side): 4,270 mm Bunker insertion height: 6,800 mm Hopper elevation: 500 mm Item 02) BUNKER VENT Type: FUF 1200-250x3500 Usable width: 1,200 mm Length: 3,500 mm Installation inclination: horizontal Drive power: 2 x 3.5 kW Item 03) CIRCULAR VIBRATING SIEVE Type: Turbo 1.4 x 1.8 - 2D Screen version: Two-decker Screen width: 1,400 mm Screen length: 1,900 mm Total length: 2,200 mm Drive power: 11 kW Item 04) HAND-HELD STATION - Between feed hopper and impact crusher - Conveyor belt with access on both sides - Enclosed and protected from the weather Item 05) ...

TECHNICAL SPECIFICATIONS Manufacturer: BROWN LENOX Designation: KUE KEN Jaw Crusher Type: 106 Design: Double toggle jaw crusher Year of construction: 1982 Inlet opening (width/depth): 1065 x 305 mm Gap width: 38 - 75 mm Throughput: 65 - 110 t/h Maximum feed size: 240 mm Drive power: 55 kW Crushing speed: 300 - 350 rpm Total weight: 10,200 kg SPECIFIC COMMENT - Solid crusher construction with steel support