Rubbel master RM 100 stone crusher, built 2010, overhauled this year, new radiator, regular serviced motor and newly repainted shell. Available immediately. Grid unit OS 100 from 2011. Ca. 7,524 working hours. Test and presentation possible can also organise transport inside EU with our own trailors. More photos on request.

- New / unused BHS Sonthofen gearbox units - Individual offers possible Pos. 01) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Ascending to the right - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Pos. 02) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Left Ascending - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Item 03 FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Ascending to the right - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Item 04) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Left Ascending - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Pos. 05) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - D ...

ID3415 Metso Lokotrack 1415 S year/Baujahr 2015 9320 hours/hours 91 t Mobile impact crusher, opening width crusher: 1540 x 1170 mm, maximum feed size: 1000 mm, with feed hopper with side elevation, vibrating chute, pre-screen with side belt, crusher discharge conveyor belt, 1-deck screening machine 3500 x 1600 mm, conveyor belt under screening machine, stockpile belt, return conveyor belt Chain-mounted impact mill, opening width crusher: 1540 x 1170 mm, maximum feed size: 1000 mm, with feed hopper with side elevation, vibrating trough, pre-screen with side belt, crusher discharge conveyor belt, 1-deck screening machine 3500 x 1600 mm, conveyor belt under screening machine, stockpile belt, return conveyor belt

Panel production plant, incl. mixing plant and finishing line Slab production line, including mixing and finisching line

Coating line for concrete slabs and pavements Including: Spray unit, drying and UV system Coating system for concrete slabs and paving Consistin of: Spraying unit, drying and UV system

SCHLOSSER SV 40 • Vibropress – vibration system on Lenze servomotor • pallet size 1400 x 1100mm • ORU batching plant big mixer MS 2250/1500S, small mixer MS 750/500 • Compleat wet and dry side • Finger car • Without curing chamber

We offer here the completely overhauled engine replacement CAT C13,Engine number:KWJ04492,Arr:366-0290 complete with starter, alternator + EGR cooler. If you are interested, please contact: MIW GmbH Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0) 4281 950583 Mail: infoatmiw-zeven

Composed of: - Loading plate conveyor type 4,000 mm x 800 mm with drive power 1.5 kW - MEC Stone Splitting Machine C320-90 - Scissor table with table surface 1,350 x 800 mm TECHNICAL SPECIFICATIONS Manufacturer: MEC Description: Stone Splitting Machine Type: Stationary, with upper and lower movable knife Type: C320-90 Year of Make: 2017 Gap width: 560 mm Gap height: 320 mm Splitting force: 90 t Number of cylinders: 1 Number of chisels: 14 upper / 14 lower Chisel dimensions: 25 mm x 40 mm x 170 mm Knife balance: 33 mm + 33 mm Hydraulic oil: 400 l Electrical power: 9.2 kW Electrical voltage: 400 V - 50 Hz SPECIFIC COMMENT - Disassembly and cleaning included at a price - Good condition due to use in Jurassic limestone - System for autonomous maintenance plan

TECHNICAL SPECIFICATIONS Dimensions (LxWxH): 10,000 x 1,200 x 1,200 mm Pavement: one-sided Hot-dip galvanizing: yes Weight: approx. 1,500 kg / segment Available quantity: 35 pcs. SPECIFIC COMMENT - Steel bridge elements for belt guidance - Robust construction - Designed for a strip width of 1,000 mm - CAD drawing available - Can also be purchased separately

ID3399 Bundling device horizontal and vertical year/Baujahr 1983/1994 Horizontal and vertical bundling unit, horizontal Ridder (built in 1994), vertical Signode (year of manufacture 1983) Horizontal and vertical strapping, horizontal Ridder (built in 1994), vertical Signode (built in 1983)

ID3398 Trafö-Bleichert year/Baujahr 1983 Mobile platform with support arm adjustment and 180 degree turntable, with motors, without controls Moving platform with support arm adjustment and 180 degree turntable, with motor, without control

ID3397 OMAG K1400 year/Baujahr 1997/2004 Block stacking system including hydraulic unit (built in 1997), doppler including hydraulic unit (built in 2004), board destacker and board stacker including roller conveyor, board infeed and board conveyor to the mast, board turner Stone stacking system including hydraulic unit (built in 1997), Doppler including hydraulic unit (built in 2004), board destacker and board stacker including the roller conveyor, board feed and board track to the lifting frame, board turner

ID3396 OMAG - Brick paver / Stone paver year/Baujahr 2001 Brick paver, conversion of additional hydraulic unit for surcharge 2020 (40,000 euros), conversion to servo vibration with conversion to S7 control 2016 (120,000 euros), conversion of digital path measurement mould and bear 2017 (4,000 euros), new core filling trolley 2017 (22,000 euros) Stone paver, conversion of additional hydraulic unit for load 2020 (40,000 euros), conversion to servo vibration with conversion to control system S7 2016 (120,000 euros), conversion of digital displacement measurement shape and bear 2017 (4,000 euros), new core filling car 2017 (22,000 euros)

Complete single layer concrete tile/slab production plant Press K754 (750 tons pressing power) Longinotti 4 station Molds for 40 x 40, 30 x 30 , 60 x 60, 60 x 30 and 60 x 40 Separate flat stack unloading and loading One Head calibrating machine 6 head diamonds Calibration 10 head polishing line CTM semi automatic palletiser 60 stacks steel frames Tables, turners, dryers etc Unused turner from the press to the pick up station for ungrinded pavers. Press is 2017 Grinder is 2018 The machines will be available for extraction from April 25 Complete production line for single-layer concrete slabs, terrazzo slabs, etc. Press K754 (750 tons press) Longinotti 4 stations Moulds for 40 x 40, 30 x 30, 60 x 60, 60 x 30 and 60 x 40 Separate flat shelf wet / dry 1-head calibration machine 6-head diamond calibration/grinding 10-head polishing machine CTM semi-a ...

ID3385 Vibrating channel Vibron channel Vibrating channel Vibron channel

ID3382 Moerschen Wash-Bear Type L year/Baujahr 2015 80 hours only/Stunden 9.1 t Containerised mobile light material separator, diameter 1000 mm Mobile container light material separator, diameter 1000 mm

ID3355 Grit Plant/Split Plant year/Year of construction 2002 Grit plant, capacity approx. 30-50 t/h, consisting of: oversize feed (feed hopper), Svedala cone crusher, feed belt, discharge belt, Ammann screening plant, oversize feed, end product: 0/3, 3/8, 3/16 Split plant, capacity approx. 30-50 t/h, consisting of: oversize feed (feed hopper), Svedala cone crusher, feed belt, discharge belt, Ammann screening plant, oversize feed, end product: 0/3, 3/8, 3/16

TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Description: Impact crusher Type: PB 0810 Year of Make: 2019 Drive cable: 90 kW Feed opening (width x height): 1,120 x 670 mm Rotor diameter: 800 mm Rotor width: 1,030 mm Number of blow bars: 3 pcs. Throughput: approx. 85 t/h Maximum feed size: 400 mm Rotor speed: 28 - 49 m/s Weight: 5,300 kg Crushing result and throughput is determined by: - Size of the feed material - Mineralogical structure of the feed material - Screening curve of the feed material - Rotor speed - Gap width adjustment - Utilization of the machine SPECIFIC COMMENT - Very good condition due to low mileage - Incl. numerous wear parts (inner lining, blow bars, baffle plate, small parts) - Inlet and outlet sheet metal construction - Manual opening of the machine by hand pumping unit - Feed hopper and feed belt available on request

ID3344 Double roller crusher year/Baujahr 2015 230 t Double roller crusher including conveyor belt 1600 mm x 12.2 m, including 2x discharge belt (Mobcon) 1400 mm x 40 m, including transfer station approx. 1.8 m x 1.8 m, feed hopper length = 4.5 m, width = 6 m, content approx. 30 cbm, apron conveyor with crawler chain, apron conveyor width 1800 mm, apron conveyor length approx. 9.5 m, cleaning conveyor belt 2000 mm x 5.3 m, including electrical equipment and control Double roll crusher incl. conveyor belt 1600 mm x 12.2 m, incl. 2x discharge belt (Mobcon) 1400 mm x 40 m, incl. transfer station approx. 1.8 m x 1.8 m, feed hopper length = 4.5 m, width = 6 m, capacity approx. 30 cbm, apron conveyor with crawler track, plate belt width 1800 mm, plate belt length approx. 9.5 m, cleaning conveyor belt 2000 mm x 5.3 m, incl. electrical equipment and control system

ID3270 Keestrack Combo year/Baujahr 2014 approx. 240 hours (real!) /hours (real!) 17.5 t Mobile crawler screening system, 6 cbm hopper, 2-deck screening (2700 x 1200 mm)(screen box KT2712E), rubber feed belt, Deutz engine DT2011L04i (53 KW), radio remote control Track-mounted screening plant, 6 cbm hopper, 2-deck screening (2700 x 1200 mm)(screen box KT2712E), rubber feed belt, Deutz engine DT2011L04i (53 KW), radio remote control

ID3280 Gravel washing plant / Kies-Waschanlage year/Year of construction 1987 Skid mobile, washing plant AT GmbH, type Roberg, washing screen unit size 1100 x 3000 mm, with sand screw and sludge decanter, fractions 16/32 4/8 0/4, capacity approx. 40-60 tons/h, Plant has been running until the end. Skid mobile washing plant AT GmbH, type Roberg, washing screen unit size 1100 x 3000 mm, with sand auger and sludge decanter, fractions 16/32 4/8 0/4, capacity approx. 40-60 to/h, system has been running until the end.

Used brick production line Make OMAG with Teka mixing plant approx. 20 shapes approx. 3,000 pieces of production boards 1400x950mm Used concrete block production plant / pavers production plant Manufacturer: OMAG Teka mixers about 20 moulds about 3000 production boards 1400x950mm

HENKE UNI 2000-6000 Built in 1995 Format: 400x400 2-speed 400x600 2-speed 1. Distributor for attachment 2. Doser 3. Settling device 4. Chain conveyor 5. Roller conveyor 6. Plate destacker 7. Cleaning device 8. Plate oiler 9. Pawl conveyor 10. Stacking device 11. Plate removal device with rotating device 12. Control for UNI 2000 13. Belt conveyor with lifting 14. Belt conveyor 15. Plate Displays 16. Carrier chain conveyor 17. Push-off device with roller table 18. Autom. Control for packaging 19. Fader Puller HENKE UNI 2000-6000 Year of production: 1995 Sizes: 400x400 2x 400x600 2x 1. First layer distributor 2. Dozer 3. Take-off device 4. Chain conveyer 5. Roll conveyer 6. Destacking device 7. Cleaning device 8. Oiling device 9. Slap converter 10. Stacking device with rotating device 11. Arm with rotating device 12. Control for UNI 2000 1 ...

ID3255 RubbleMaster RM120GO! year/Year of construction 2018 approx.  5600 hours/hours Mobile impact mill, with pre-screening, magnet, oversize grain recirculation, remote control, wear parts are still being replaced Mobile impact mill, with pre-screening, magnet, oversize recirculation, remote control, wear parts are still being renewed

Used multi-layer paver Zenit 844 Built in 1993 inclusive: 1 piece concrete mixer 750 l Teka 1 piece concrete mixer 500 l approx. 12 pieces of used moulds approx. 100 production pallets Used concrete multilayer machine Manufacturer: Zenith Type: 844 Year: 1993 including: - 1 pcs 750 liter mixer Teka - 1 pcs 500 liter blender - about 12 moulds - about 100 pcs production boards

ID2430 Waagner Biro Wet Ball Mill 260 x 550 cm year/Year of construction 1987 52 t Wet ball mill, overflow ball mill, drum diameter 2600 mm, grinding track length 5500 mm, ground material: limestone 0-10 (16 mm), wet grinding process, 2-stage cyclone circuit, nominal grinding capacity: 12-22 t/h, filling weight max./normal: 44/39 t, installed engine power: 450 KW, rubber Skega armor Wet ball mill, overflow ball mill, drum diameter 2600 mm, grinding track length 5500 mm, regrind: limestone 0-10 (16 mm), wet grinding process, 2-stage cyclone circuit, nominal grinding capacity: 12-22 t/h, filling weight max./normal: 44/39 t, installed engine power: 450 KW, armouring rubber skega

ID2955 Key Maker Magic 1211 year/Year of construction 1984 Manhole finisher, 1 piece Magic 1211, with 2 Atlas 300 + 400 molds, 2 palisade molds, 1 built-in mold, 1 vibrator incl. FU, various base sleeves Shaft paver, 1 piece Magic 1211, with 2 pieces of moulds Atlas 300 + 400, 2 pieces of mould palisades, 1 piece of mould installed, 1 piece of vibrator incl. FU, various lower sleeves

Slicer IFE 2 x 5 m 1 Deck Version Screen lining, wire cross-tensioned Very good condition, few operating hours from a pilot plant

Used sand-lime brick press, hydraulically working, two-sided compaction, 195 kW install. Power, control S5, max. pressing force approx. 10,000 kN, max. pellet height 650 mm, for the production of sand-lime brick blocks and elements, fully automatic operation, plant still in operation – visit possible

Sand-lime brick press, hydraulically working, Fabr. Dorstener HDP800 N (left-hand version), with two-sided compression, 190 kW install. Power, control S5, max. pressing force approx. 6,000 kN, max. pellet height 300 mm, for the production of sand-lime brick blocks, fully automatic operation, system is dismantled and stored in a dry place