planing used for sale

AD planing machine Hammer A3-41, built in 2019, very good condition, incl. reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 knives, 350 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Felder AD741, very good condition, year 2003, 4 kW S6, 400 V, 410 mm table length, 2000 mm table width, 4 knives, approx. 400 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-31, good conditionPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Holzprofi FS41N all incl. very good condition, incl. reversible blade, 2 speeds and feed 6/12 m, 4 kW, 1850 mm table length, 410 mm table width, 4 knives, approx. 470 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-31, year 2018, very good condition, very little used, 310mm planing width, incl. 1 set of replacement knives (reversible knife), 3 kW, 3 knives, 300 kgPrices subject to change, errors, printing and typesetting errors excepted

Technical data:Total table length 2350 mm, thickness table length 1000 mm, stop ruler 1500x180 mm, knife shaft diameter 120 mm, number of knives 4, knife length 550 mm, dressing stop swivel 90 - 45, feed speed 6/12 m/min, max. chip removal 6 mm, motor output power 5.5 kW (7 kW S6), weight 920 kg, with automatic star delta switching.Options: - Motor output power 7.5kW (9.5 kW S6)- electric table lift; - 2 under-table roller - Digial height display of the thickness table - Knife adjustment gauge

SCM F5L Surface planing machine Planing width 510mm 4 knife shaft YOC 1995 Functionality: fully functional G&-5214-M3L42

Number of spindles: 4 St. Working width: 15 - 230 mm Working height: 10 - 125 mm Feed speed: 6 - 24 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: 1000-1600 mm working width: 40-150 mm Thickness: 10-80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 6 St. Working width: 20-230 mm Working height: 8-160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Feed motor: 5,5 kW total power requirement: 58,3 kw weight of the machine ca.: 4000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

planing width: 405 mm total power requirement: 15 kW Weight: 1900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

planing width: 610 mm total power requirement: 19,5 kW Weight: 2500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5 , 310 mm, 250 mm

Four-sided timber planer REX HOMS-310-K with 5 shafts Year of Make: 1978 Working width: 310 mm Working height: 40-310 mm Working height 4-sided: 210 mm (can be increased to 250mm) Number of Spindles: 5 Spindle arrangement: u-o-r-l-u Spindle diameter: 50-50-40-40-40 mm Spindle speed: 5400 rpm Counter bearings: 1-2-5 Motor powers: 7.5-11-5.5-7.5-7.5 kW Working width adjustment: manual Working height adjustment: motorized Feed speed: 5-60 m/min Feed motor: 5.5 kW Feed: Chain Driven rollers in the table: 2 Top feed rollers: 5 Pull-out transport rollers: 4 Horizontal tool head: 2 PCS - D180xH300xd50 Tool head vertical: 2 PCS - D160xH210xd40 Table height constant: approx. 950 mm Chip removal at the bottom: 10 mm Chip removal at the top: 16 mm Right chip removal: 20 Chip removal left: 20 Diameter of the suction nozzles: 200-200-140-140-120 mm Weight: 5500 kg Space  ...

Steel Holder Head Waldrich Stand Metal Long Planer Slotting Machine Schepping Total weight approx. 100 to 150 kg. Good used condition, worked until the end, only the spur gear at the rear shows signs of wear. The offer is for the head, which is height-adjustable with the handwheel. It was dismantled from the actual machine. The support plate on the boom, which is connected to the large trapezoidal spindle is NOT included. The side head is also still in stock, but NOT included in this offer. With a heavy heart, I dismantled the parts from a superbly preserved planing machine. The machine was in the basement of a machine factory and it was not economically possible to replace this . It was apparently put there earlier and then a wall was bricked up. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act.  ...

WEINIG Quattromat Q23P, S/N 86825, YOC 1999 Machine with full fairing and integrated sound and dust protection. Technical data: Planing width: min. approx. 13 mm / max. 230 mm (with 125 mm flight circle) Planing height: min. approx. 6 mm / max. 120 mm (with 125 mm flight circle) Feed: 8 m/min., feed motor 1.5 KW Spindle sequence: 1. Spindle at the bottom, motor 5.5 KW 2nd spindle right (joint) / 3rd spindle left, motor 7.5 KW 4. Spindle top, motor 5.5 KW Spindle diameter D = 40 mm Accessories/Extras: Dressing table 2000 mm with joining ruler (adjustment range 10 mm) Folding device with joining seam cutter Manual Wax Pump Pneumatic pressure of the feed rollers Feed roller in front of dressing pneumatically timed Central position of the lubrication points at the front of the machine SICO Counters Set of planer heads WEINIG Centrolock 533 Operating instructions,  ...

Key data: 5 , 300 mm, 125 mm

Four-sided planing or pre-planing machine Right machine, operation left The machine is especially suitable for planing and pre-planing slats. The floating vertical units in lightweight construction are optimally designed for the processing of curved goods. Short set-up times and fast dimension changes are made possible and guaranteed by the flexibility of the machine. The machine has 5 working spindles, with the following arrangement: [1] [2] [3] 1. Horizontal Down 2. Horizontal top 3. 4. Vertical left/right ( opposite ) 5. Scoring saw at the bottom TECHNICAL DATA Work dimensions Working width: 50 - 300 mm() Working thickness: 30 - 125 mm Working length: min. 1,800 mm Table height: 1,100 mm Feed speed: 50 - 250 m/min. Working thickness up to 160 mm possible with appropriate tools on the vertical spindles. Minimum planing width 50 mm possible with tool D≥250  ...

Key data: 4 , 600 mm, 300 mm

FINAL PLANING LINE FOR STRAIGHT GLULAM PRODUCED BY LEDINEK => EUROPLAN 600-4V+4F S60 WITH INFEED AND OUTFEED MECHANIZATION Orientation: right machine This four-sided heavy-duty planer for timber was specially designed for planing of constructional timber and glulam beams. The machine is suitable for green as well as kiln dried timber. Machine is equipped with hydro cutterheads. The adjustment of cut off on the first cutterhead is motor driven. Set value is shown on operational panel. One’s desired thickness is set through an adjustable top unit with second cutterhead, the adjustment is motor driven with spindle lift mechanism in 6 columns with 120 mm diameter. The set thickness is shown on operational panel. The vertical units enable good clean surface or profiling. The machine has two opposite vertical floating heads (float up to 40 mm) so they can adjust to the curvature ...

Key data: 510 mm, 2500 mm, 4 St.

Martin T51 Surface Planer – Classic from the 60s | 4-Knife Shaft | overhauled at handover For sale is a Martin T51 surface planer, a real German machine classic from the solid cast iron era of the 60s. These machines stand for extremely smooth running, precision and durability – exactly what many modern machines often no longer deliver. ⸻ Technical data & equipment: • Model: Martin T51 • Year of construction: approx. 1960s • 4-knife shaft • Solid cast design • Precise dressing tables with good flatness ⸻ Condition: • Machine has been tested • Technically fully functional • Signs of wear due to age (purely visual) New knives are used at handover → ready for immediate use Approx. 1200 KG - Forklift available for loading.

Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory  - Soundproofing hood  - CE compliant 

planing width: 30-260 mm planing height: 10-200 mm number of spindles: 6 Weight: 6650 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 410 mm

SURFACE PLANER model SCM MINIMAX F1 second hand machine in Excellent working conditions CE regulation: YES instruction booklet and CE certification: YES security protection working width mm. 410 tables length mm. 2610 n.4 knives "Tersa" tilting guide up to 45° motor power Hp 5,5 volt. 380/50

Weinig Unimat 2000 four-sided planer Working width 230mm Working height 160mm Number of spindles 8 Spindle system Down 11kw 12.000r.p.m Right 7.5kw 6000r.p.m Left 11kw 12.000r.p.m Right 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 30kw 6000r.p.m Inverter-adjustable feed speed up to 36m/min 4 drive rollers in the work table Pneumatic Material Clamps Total power of the machine 106kw Year of manufacture 2002

Weinig Hydromat 2000 planing line with in and outfeed system, Manufacture year 2008, Consisting of:, - Weinig automatic infeed system High Mech E1, - Weinig moulder Hydromat 2000, - 6 spindles: B-R-L-T-T-B, - feed speed max. 60 m/min, - straight and profile jointers, - Weinig automatic outfeed system High Mech A1

Four-sided planer copper mill Model: VUIN 605 Planing width 605 mm Planing height 200 mm between upper and lower planing shaft Planing height of vertical planing heads 100 mm With additional horizontal unit Predressing table Length 1750 mm x width 400 mm, adjustable up to 12 mm Predressing shaft with 4 knives width 340 mm and Jointing cutter 20 mm, motor power 4 kW With pull-in device from above, swivelling Planing shaft bottom 5.5 kW Planing shaft top 10 kW Planing shaft right 4 kW Planing shaft left 4 kW All planing shafts as 4-knife shaft right and left spindle 4 knife shaft, equipped with 2 knives each Thickness table adjustment motorized adjustable Feed rates 7-9-11,5-14-18-23 m/min. Feed motor motor power 4 kW 3 fluted feed rollers 3 smooth table rollers 1 smooth pull-out roller Planing height minimum 3 mm Shortest piece length 350 mm The pictures s ...

Weinig Profimat 23 ATS four-sided planer Working width 230mm Working height 120mm Number of spindles 4 Spindle layout: 11kw pit Rights Left 11kw Top 11kw Pneumatic Material Clamps Feed speed adjustable 5-22m/min Input table length 2470mm 4kw feed motor CE Certificate Lashing diameter 4x140mm Net price

Number of spindles: 5 St. Working width: 20 - 230 mm Working height: 8 - 120 mm Length of the planing table: 2500 mm Feed motor: 1,1 kW Feed speed: stufenlos regelbar 2-12 m/min. weight of the machine ca.: 2500 kg 1 WEINIG VARIOMAT Planing and Moulding Machine --------------------------------------- Brief Summary: --------------------------------------- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturers Description: --------------------------------------- Working width: 20 – 230 mm Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom --------------------------------------- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right --- ...

Key data: 10 , 240 mm

Four-sided planer Weinig Type: Unimat 23 / U 23 Year of manufacture 1994 CE Planing width 240 mm Planing height 160 mm (240 mm universal shaft) With 2 universal shafts 360° clamping length 240 mm Length of dressing table 2350 mm 10 planing shafts Arrangement of planing shafts and table rollers 1.Shaft bottom 7.5kw smooth driven roller in the table 2nd shaft right 7.5 kW 3rd shaft left 7.5 kW 4th shaft right 7.5 kW smooth driven roller in the table 5.Shaft top 7.5 kW 6.Shaft bottom 7.5kw smooth driven roller in the table 7.Shaft top 7.5 kW 8.Shaft bottom 7.5kw smooth driven roller in the table 9.Shaft Universal u, right, li, o 360° 7.5 kW smooth driven roller in the table 10.Shaft Universal u, right, li, o 360° 7.5 kW Smooth driven pull-out roller in the table Spindle diameter 40 mm Cardan feed, feed motor 8.6 kW Feed speed 6 – 36 m/min. Electric he ...

Part Number: 7995 SPECIFICATIONS - max planing width 240mm - max planing height 140mm 4 spindles: 1) horizontal bottom 240mm 5.6kW 2) vertical right 140mm 5.6kW 3) Vertical left 140mm 7.5kW 4) horizontal top 240mm, electrically adjustable up/down 0.37kW - 7.5kW - diameter of all spindles 40mm - All spindles adjustable up/down and right/left - 5 pulling, toothed, torsion shafts from above, including 1 double - 2 output rollers from above, rubber, pulling - metal roller at the bottom at the exit, pulling, split - pneumatically pressed rollers - 3 clamps on the side - electric setting of planing thickness 0.37kW - length of the introductory table top 2080mm - infinitely variable feed speed control on the inverter - feed on cardan shafts - 3.7kW feed motor - central lubrication - Extraction port diameters 4x125mm - Dimensions L/W/H 3600x1650x1700mm - weight about  ...

Part number 7994 SPECIFICATIONS - max width of the workpiece 230mm - max workpiece height 130mm 7 spindle: 1) horizontal bottom 230mm 4kW 2) Vertical right 130mm 3) Vertical left 130mm (2 and 3 spindle) 11kW 4) Horizontal top 230mm 5.5kW 5) horizontal top 230mm 5.5kW 4 & 5 Spindle Electrically Adjustable Up/Down 6) horizontal bottom 230mm 4kw 7) universal 230mm, 360° adjustable 5.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling input rollers from above - 4 leading, pulling, rubber, smooth shafts from above, including 3 double - metal pulling roller at the bottom - feed on cardan shafts - pneumatically pressed rollers - infinitely variable feed speed control on the inverter - 3kW feed motor - working pressure 6-10bar - Electric planing thickness setting - central lubrication of the table top - length of the introductory tab ...

Part number 7987 SPECIFICATIONS - shaft width 500mm - number of knives 4pcs - max thickness of the workpiece 230mm – in advance: - latches - toothed, pulling, torsional introductory shaft - pressure - planing shaft - pressure - smooth pulling shaft - 4kW motor - electric lifting of the table top - 2 types of feed speed 8/12.5m/min - dimensions l/w/h 1000x1000x1050mm - weight 620kg ADVANTAGES – Italian production – thickness sheet used, very good condition Net price: 14900 PLN Net price: 3548 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Planing width mm 260 Dressing table length mm 1040 Max. saw blade diameter mm 250 Saw blade spindle mm 30 Max. saw blade protrusion from the table at 90 mm 75 Max. saw blade protrusion from the table at 45 mm 60 Cutting width at the rip fence (longitudinal cut) mm 500 Milling machine Max. usable spindle length mm 75 Milling machine Max. tool diameter for profiling mm 160 Milling spindle speed rpm 4000/6500 3 motors in V.230 1 PH  

A Cleveland dressing and profiling machine for machining diamond and CBN grinding wheels is available. Dressing process: dry, max. single wheel dimensions X/Y: 400mm/30mm, max. wheel package dimensions X/Y: 150mm/150mm, grinding spindle diameter: 80mm, wheel flange bore: 32mm. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/2000mm, weight: approx. 850kg. Documentation available. An on-site inspection is possible.

X-Axis 10,000 mm Y-Axis 1,500 mm Clearance height 1,850 mm Table dimension 10,200 x 1,500 mm Dimension L=22.67m, W=3.97m, H=3.95m Weight appr. 58,000 kg

Used SCM S520 NOVA thickness planer useful working width mm. 520 Standard 4-knife shaft working height min/max mm. 3,5/300 max removal mm. 8 Double rubberized drive roller at the exit nr. 1 toothed drive roller at the inlet Electric Deck Lift 4-speed feed Star/delta starter Shaft rotation speed 4500 rpm Weight kg. 687 CE compliant

Code: 0447 Brand: TB Model: 29 Jack planer for planing and trimming wooden edges Technical data: Rpm 14000 Power 1000 watts, single-phase 220 V Knives 60 mm Large work surface for comfortable and safe working Overall dimensions cm 25 x 35 x 15 h Weight kg 4

Key data: 5 , 230 mm, 120 mm

5-spindles automatic planer with grooved table WEINIG PROFIMAT 23 E with grooved plane ( removable ) second hand machine n.5 spindles working condition : Excellent CE mark : Yes volt. 380/50 grooved plane ( removable ) with tools : Yes , as in photos Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 10 ( Kw 7,5 ) 4° spindle : thickness planer . motor power Hp 7,5 ( Kw 5,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) grooved plane ( removable ) Technical details : forward motor power Hp 4 ( Kw 3 ) spindle rotation speed rpm 6000 feed speed : from 5 to 24 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 lubrication system electric height adjustment set of service keys / documentat ...

TECHNICAL DATA: Working length: min. 350 mm – max. 3000 mm Working width: min. 20 mm – max. 230 mm Element thickness: min. 12 mm – max. 70 mm Feed speed: 10 to 50 m/min Installed power: 1.5 kW

x-travel: 6300 mm y-travel: 2200 mm workpiece height: 1835 mm Table area: 6000x1835 mm Rest: 2 Side head: 2 number of T-slots: 7 T-slot - distance: 240 mm T-slot - width: 28 mm bed length: 14650 mm column daylight: 2075 mm feed: 5-60 m/min workpiece weight: 15000 kg total power requirement: kW weight of the machine ca.: 55 t dimensions of the machine ca.: 14,65x4,37x4,05 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look fo ...

Thickness planer SCM Mini Max FS410 Leveller: Working width: 410 mm Total length of tables: 2000 mm Length of the feeding table: 1000 mm Shaft speed: 5300rpm Number of knives: 4 Tersa knives Maximum Cutting Depth: 5mm Bar tilt range: 90°–45° Thickness; Table Dimensions: 700 × 410 mm Minimum / maximum working height: 3 - 230 mm Maximum Cutting Depth: 5mm Feed Speed: 8m/min Extraction port diameter: 120 mm Motor Power: 4kw Total weight: 435 kg Overall dimensions (W × L): 770 × 2000 mm Net price

working width: 180 mm; working height: 120 mm; working spindles: 4; spindle following: down, right, left, up; motor power spindle down: 3,7 kW; motor power spindle right: 3,7 kW; motor power spindle left: 3,7 kW; motor power spindle up: 5,5 kW; adjustment spindle down: -; adjustment spindle right: -; adjustment spindle left: manual; adjustment spindle up: electric; cutter heads: turn cutter; feed speed: 2; feed pressure: feather; current consumption: 38 A; motor brake: automatisch; suction connection: machine length: machine width: weight:

working width: 510 mm; maximum workpiece thickness: 250 mm; kutter head: Tersa; number of blades: 4; adjustment table: electrical; read out workpiece thickness: digital; feed speed: variable; feed roller: rubber; outfeed roller: rubber; table roller: no; motor power: 7,5 kW; suction connection: 160mm; machine length: 1200mm; machine width: 1200 mm; weight: 1000kg;

working width: 520 mm; working height: 250 mm; cutter head: strip-knive; number of blades: 4; height adjustment: electrically; read out workpiece thickness: scale; feed speed: 2 speeds; infeed roller: steel; outfeed roller: steel; table roller: yes; motor power: 5,5 kW; suction connection: 140mm; machine length: 1200 mm; machine width: 1400 mm; weight: ca. 900kg;

working width: 630 mm; cutter head: strip knife; number of blades: 4; surface table length: 2600 mm; adjustment table: motor power: 4kW; machine length: 2600 mm; machine width: 1000mm; weight: 880 kg;

Description - TERSA planer blade system enables particularly quiet operation. - Helical toothed steel feed roller for constant and uniform material intake - Two-speed material feed - Numerical display for thickness table height - The 2,000 mm long dressing tables enable easy dressing of large workpieces. - Work tables are made of grey cast iron, post-annealed and stress-free, making them insensitive and permanently flat - Sturdy large aluminium dressing stop with round bar guide (1200 x 160 mm) - Thickness table adjustment via handwheel with numerical display for the planing height - The high machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron construction Technical data Dimensions and weights Length (product) approx. 2000mm Width/depth (product) approx. 1110mm Height (product) approx. 1115mm Weight (net) app ...

Number of spindles: 6 St. Working width: 15 - 250 mm Working height: 10-200 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 6-24 m/min. Kuper SWT XL-6 Automatic Planer and Moulder (Window Version with Glazing Bead Separation) ------------------------------------ - Number of spindles: 6 (Bottom, Right, Left, Top, Top, Bottom) - Working width: 15 - 250 mm - Working height: 10 - 200 mm - Spindle speed: Frequency-controlled 4,000 - 8,000 rpm - Feed speed: 6 - 24 m/min, infinitely variable - Feed motor with electronic brake: 4 kW - Equipped for glazing bead separation in window production - Motorized axial and radial spindle adjustment - K2 Comfort Control, Professional - 9 Touchscreen Manufacturers Description (Summary): ------------------------------------ 1st Spindle: HORIZONTAL BOTTOM ------------------------------------ Siemens IE3 motor with inverter brake: 7.5 kW D ...

Key data: 7 , 170 mm, 140 mm

Four-sided planer Weinig Type: U 17 A Year of Make: 1979 Planing width 170 mm Planing height 140 mm Dressing table 1960 mm long 7 Waves: 1. Bottom 4kw 2. Right 3 kW 3. Left 4 kW 4. Right 4 kW 5. Top 5.5kw 6. Bottom 4kw 7. Universal 4 kW Feed speed max. 18.5 m/min. with manual Waxilit pump well-functioning condition

Description - With TERSA knife shaft for razor blade changes in seconds - TERSA planer blade system enables particularly quiet running - Helical toothed steel feed roller for constant and even wood feed - The particularly long dressing tables made of one piece enable easy dressing of the workpieces - Large dressing stop can stay in place when opening the dressing tables - Rear-opening dressing tables - The high machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron constructionWork tables made of grey cast iron, after-annealed and stress-free, therefore insensitive and permanently flat - Table lips for quiet running Technical data Dimensions and weights Length (product) approx. 1725mm Width/depth (product) approx. 880mm Weight (net) approx. 270kg Dressing Total length of tables 1500mm Working height900mm Chip ...

Combined dressing and thickness planing machine from Hofmann with the legendary Leitz-Wigo spiral knife shaft, very robust mechanical engineering in a compact design Special feature of this machine: The dressing table does not have to be opened for thickness planing, so no conversion is necessary With a "real" spiral wave. Planing width approx. 620mm Thickness table electrically adjustable with digital display, fine adjustment by handwheel Fluted steel feed roller rubberized pull-out roller, new Planing height approx. 4 - 240mm 2 feed speeds 7 + 14 m/min Table length 2520mm Drive motor 5.5kW with automatic motor brake 2-knife shaft with spiral-shaped, resharpenable HSS knives there are two sets of spiral knives, each built into matching pressure jaws. Resharpening is carried out by the sharpening service, and the sharpened knife sets are then simply screwed into the plani ...

Ledinek Superles 400 4V/4F Planing Width 410mm Planing Height200mm