planing used for sale

technical details: - TERSA planer knife quick-change system as standard - Material feed with separate motor and two speeds - Aluminium dressing stop (1200 x 160 mm) with round rod guide - Table adjustment by hand with numeric display (1/10 mm accuracy) - Helical toothed steel feed roller electrical data: - Power drive motor: 5 kW - Rated voltage: 400 V - Rated current: 9 A - Mains frequency: 50 Hz Dimensions and weights: - Length: approx. 2,000 mm - Width/depth: approx. 1,100 mm - Weight: approx. 430 kg Dressing: - Total length of the tables: 2,000 mm - Task table length: 1,034 mm - Working height: 900 mm - Chip removal max. dressing: 5 mm - Dressing stop length: 1,200 mm - Dressing stop height: 160 mm Connection suction: - Suction nozzle - Ø: 2 x 120 mm Installation information: - Space requirement length: 2,000 mm - Space requirement width/ depth ...

CATALOG NO. 7223 TECHNICAL DATA - max planing width 770mm - max planing height on both sides 200mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - 2 rows of pressure - pulling shaft, toothed - pressure - planing shaft 770mm, 4-knife 7.5kW - pressure - pulling, smooth, output shaft from down: - guide strip - introduction table with a divided sliding shaft - introductory tabletop adjustable up/down - planing shaft 770mm, 4-knife 5.5kW - 2 smooth, pulling, adjustable shafts in the back: - 2 side spindles + clamps 1) vertical right 100mm 4kW 2) vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - electric setting of planing thickness - 4 types of feed speeds 6;9;12.5;18 m/min - 2kW feed motor - diameters of the exhaust pipe: 2x120mm, 2x180mm - dimensions length/width/heigh ...

CATALOG NO. 7186 TECHNICAL DATA - max planing width 510mm - max planing height on both sides 170mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - pulling shaft, toothed - pressure - planing shaft 510mm, 4-knife (2 knives installed) 4kW - pulling, smooth, output shaft from down: - guide strip - sliding roller – adjustable top with an up/down roller - planing shaft 510mm, 2-knife 4kW - 2 smooth, sliding, adjustable shafts in the back: - 2 side spindles + pressure - 1) vertical right 100mm 2.35kW - 2) vertical left 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual setting of planing thickness - 4 types of feed speeds - feed motor 1.5kW - dimensions length/width/height 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, floor tiles, etc. – pro ...

Gubisch Type 147 4-Side planer Planing width 180 mm Planing height 150 mm Feed stepless with 7 spindles of which a universal spindle with length dressing table Drive 34.6 kW with lots of tools, planing knives, etc. with planing heads and several groove and spring sets at least 4 planing heads, with chamfering knife and spacer discs

Order No. 6716 TECHNICAL DATA - max planing width 510mm - maximum planing height on both sides 190mm - maximum four-sided planing height 130mm from down: - guide rails - preliminary table, adjustable - smooth skid roller - 510mm planing shaft, 4-knife 5.5kW - 2 smooth, sliding shafts - adjustable rollers in the lower table top in advance: - pulling shaft, toothed - pressure - pulling shaft, toothed 2 pcs - pressure - 520mm planing shaft, 4-knife approximately 7.5kW - pressure - pulling shaft, smooth - pressure in the back: - side spindles 2 pieces - 1.right, vertical 130mm 4kW - 2nd left vertical 130mm 4kW - manual spindle feed - diameter of the spindles 40mm - adjustable spindles up / down, right / left - the axes are positioned alternately - side clamp 2 pcs - locking spindles - 2 types of feed speed + smooth about 3kW - diameter of the extraction conn ...

Part Number 6322 TECHNICAL DATA - max width of the workpiece 260mm - max height of the workpiece 160mm 6 spindles: 1) horizontal bottom 260mm 7,5kW 2) vertical right 160mm 7,5kW 3) vertical left 160mm 7.5kW - 3 spindles electrically adjustable front/rear 0.4kW 4) horizontal top 260mm 11kW - 4 spindles electrically adjustable up/down 0.4kW 5) horizontal bottom 260mm 7,5kW 6) universal 230mm 7,5kW - universal spindle electrically adjustable up/down - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 1,2,3,4,5 50mm - universal spindle diameter 40mm - from above 6 pulling, toothed, metal, torsional introductory shafts, including 2 double - from above 5 pulling leads shafts, rubber, smooth including 3 double - from the bottom from the side of the pressure on the inlet - from below 2 pulling, metal, toothe ...

Weibert WJ-FS-41 Profi Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height 4 reversible planing knives WJ-300200

Key data: 500 , 2600 , 4

Weinig planing machine Product name: Planing machine Type: AF51 Manufacturer: Weinig Machine number: unknown Year of manufacture: unknown Condition: Used Technical details: - Total table length: 2,600 mm - Feed table: 1,380 mm - Removal table: 1,080 mm - Table height: 810 mm - Chip removal: 0 – max. 8.0 mm - Stop (L x H): 1,250 x 155 mm (obliquely adjustable up to 45° without scaling) - Planing width: 500 mm - 4-knife shaft with 4 strip planing knives - Suction nozzle: 160 mm - Power: approx. 3kW - Weight: approx. 750 kg - 4 knives installed with slight signs of wear - 1 piece Barkomat adjustment gauge - the engine and the knife shafts have been re-mounted - the table lips have been re-milled (approx. 8 mm slots) to reduce the noise level. minimize Machine dimensions/set-up dimensions (L x W x H): 2,600 x 1,350 x 810 mm Transport dimensions (L  ...

Key data: 410 mm, 2600 mm, 4 St.

SCM planing machine F410 Product name: Planing machine Type: F410 Manufacturer: SCM (Italy) Machine number: AB.43770 Year of manufacture: unknown Condition: used, revised and checked Technical details: -Total length of both tables: 2,600 mm - Length of feed table: 1,450 mm - Length of acceptance table: 1,150 mm - Planing width: 410 mm - Diameter knife shaft: 120 mm - Number of planing knives: 4 pieces Tersa knives - Blade shaft speed: 5,000 rpm - max. chip removal: 5 mm - 1 x suction nozzle, diameter 120 mm - 1x joining stop (length: 1,100 mm, height: 170 mm, tiltable 90° - 45°) - 1x folding stop Engine data: - Voltage: 380 V - Current: 6.5 A - Frequency: 50 Hz - Power: 5.5 kW - Speed: 2,800 rpm Machine dimensions (set-up dimensions) L x W x H: 2,600 x 1,200 x 1,050 mm Transport dimensions (L x W x H): 2,700 x 1,200 x 1,200 mm (on pallet) - Number o ...

Used four-sided planer Int. Art. Ref. m3491 Manufacturer: SCM Type P 64 B Built in 1988 4 planer shafts YOC 1988 max. planing width 165 mm min. planing width 23 mm max. planing height 105 mm min. planing height 6 mm Spindle speed 6,000 rpm. Weight approx. 950 kg Location: 59425 Unna The machine can be viewed under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfe ...

CATALOG NO. 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm in advance: - pawls - sequential pulling shaft - 2 rows of clamps - pulling, sequential input shaft - 500mm planing shaft, 4-knife, 7.5kW engine - clamps - pulling, smooth, output shaft - pressure on the lead from down: - adjustable insertion table + pressure - slip shaft, smooth - 500mm planing shaft, 4-knife, 5.5kW engine - 2 slip shafts, smooth - side pressure in the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - smooth adjustment of feed speed 8-30m/min - electric tabletop lifting - diameters of the exhaust pipe: 2x145mm, 2x160mm - dimensions length/width/height 2050x1700x1700mm - weight 2100 kg ADVANTAGES – ideal for flooring processing – electric tabletop lifting ...

Multi-sided wide planing machine with chamfer unit LEDINEK SUPERLES 300 4V + 4F Planing width (min/max): 70 - 300 mm Planing height (min -max): 19 -300 mm Workpiece length (min): 2,000 mm Feed speeds: up to 230m/min Weight: 13.500 kg

Planer and multi-leaf saw, ideal for batten production. 2 planing shafts above and below with 5 knives per shaft. Planing height 200 mm Planing width 600 mm. Engines: Bottom 18.5 KW. Above 18.5 KW. Electric table adjustment. Feed up to 23 m /min. Attached multi-leaf saw Raimann DK 14. Cutting width 407 mm. Cutting height 50 mm. Motor 37 KW. Setback fuses and fluted feed rollers with pressure. Feed unit on the inlet side.

technical details of the dressing planer: - Planing width: 310 mm - Total length of the planing tables: 1,400 mm - Diameter of the knife block: 70 mm - TERSA planing knife shaft - Number of knives: 3 - Knife dimensions: 310 x 25 x 3 mm - Rotation speed of the knife shaft: 5,500 rpm - Dimensions of the dressing stop: 1,300 x 150 mm - Swivel range of the dressing stop: 90° - 45° - Maximum cutting depth: 4 mm technical details of the thickness planer: - Dimensions of the thickness planer table: 430 x 310 mm - Capacity height of the thickness planer: 230 mm - Diameter of feed rollers: 30 mm - Maximum cutting depth: 4 mm - Feed speed: 6m/min - Handwheel with analog display for height adjustment - Diameter connection dust extraction: 100 mm - Weight: 280 kg Engine data: - Voltage: 400 V - Engine power: 3.72 kW / 5 hp Transport dimensions (W x D x H): 1,590 x 85 ...

CATALOG NUMBER 6674 TECHNICAL DATA - max planing width 150mm - max planing height 130mm 7 spindles: 1) horizontal lower 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal upper 150mm 4kW 5) horizontal lower 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all adjustable spindles up / down and right / left - from above, 4 pulling rollers, toothed - 4 rubber, pulling rollers from above - 2 clamps from above - electric adjustment of the planing thickness of 0.25kW - length of the introductory top 1970mm - central lubrication of the table top - smooth regulation of the feed speed - 1.5kW feed motor - diameters of the extraction ports 6x120mm - dimensions length / width / height 4000x1300x1600mm - weight about 3000 kg - German production - for 6 heads - used planer, very good condition Net price: PLN 36900  ...

– Italian production – year of manufacture 2007 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm 1) horizontal bottom 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2 and 3 spindle) 11 kW 4) horizontal top 230 mm 7.5 kW all spindles up/down, right/left spindle diameter 40 mm from above 3 insertion rollers pulling metal, swivel including 2 double pulling lead shaft from above, double rubber on the side, pressure 1 pc. in the lower table top a rubber pulling roller feed on cardan rollers pneumatic clamps infinitely variable feed speed 5-22 m/min feed motor 1,1 kW electrical setting of planing thickness lifting engine 0,37 kW introductory table length 2470 mm enclosed in the cabin central lubrication of the table top extraction pipe diameters 150 and 180 mm dimensions (L/W/H) 3650 / 1200 / 1600 mm wei ...

– German production – year of production 1995 – right and left spindles with a front milling cutter ensuring parallelism and a right angle of 90° – measurement of the width of the element – electronic width setting TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm control of the width of planing electronic 1 bottom spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (front milling) 4 right spindle 4.2 kW (front milling) 5 top spindle 7.5 kW element width measurement electric height adjustment of feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six steel top rollers one top rubber roller one roller in the working table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm connection diameter 140 mm dimensions of the machine (L/W/H) 456 / 240 / 220 ...

– German production – year of manufacture 1990 – for wet wood TECHNICAL PARAMETERS: planing width max. 310 mm planing height on both sides 300 mm planing height four-sided 100 mm spindle diameter 30 mm shaft motor power 2 x 11 kW spindle motor power 2 x 7.5 kW feed speed 14-86 m/min feed speed adjustable on the variator four upper pulling shafts two lower pulling shafts four rollers in the auxiliary countertop brake minimum element length 600 mm machine dimensions (L/W/H) 290 / 170 / 210 cm weight ~ 3500 kg

Key data: 4 , 220 , 120

Guiliet Profilier and Hobelautmat with Wepla heads Model: 220 KXR 220 Year built:1990 Condition: very good (used) MAX CROSS-SECTION 220 X 120 MM MIN CROSS-SECTION 30 X 6 MM ENTRANCE TABLE 2000 MM long. PLANING SHAFTS 40 MM Dressing shaft 5.5 kW right and left planing shaft combined 5,5kW Thickness planer shaft 5.5 kW WEIGHT APPROX. 1600 KG Cleaned, maintained and functionally tested. If necessary, we can gladly offer planing heads with continuous cutting edges.

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

Weibert FS 32 Dressing-thickness planing machine Dressing table length of 1500mm Planing width of 320mm Motor 3KW (4HP) S1 100% continuous load operation Max. chip removal of 5mm Dual folding system of the tables to the rear with spring support Thickness height from 4-225mm 3 Automatic planer knife shaft Feed speed. from 8m/min. Table dimension of the thickness table 700x316mm Weight approx. 420 kg Machine tables and aggregate made of cast iron WJ-300100 mreE The following options are available at an additional cost: Engine 4.0 KW (5,5 HP)S1 100% WJ-300103 Wescott Chuck 0-16mm WJ-300102 Slotted hole drilling rig FS 32 WJ-300101 Professional planing stop FS 32 WJ-300104 Side planer stop WJ-300105 Planer knife 320 HSS G&WJ-BA-320-HSS PLEASE INQUIRE ABOUT SPECIAL PRICES!

Four-sided planer copper mill Type: Vuin 605 Planing width 605 mm Planing thickness 3 – 200 mm in the horizontal area Planing thickness at the rear in the vertical area 80 mm Upper and lower planer shafts as 4-knife shafts 4 planer shafts 1. Bottom 5.5 kW 2. Top 7.5 kW 3. Left 4 kW 4. Right 4 kW Shortest piece length, self-continuing: 350 mm Electrically height-adjustable table Width adjustment for the rear planer heads manually via crank 2 feed speeds Suction nozzle diameter 3x120mm, 1x150mm Weight approx. 2700 kg Space requirement L 2350 x W 1400 x H 1800 mm Control cabinet 1200 mm x 420 mm x H 1050 mm

Four-side planer KUPFERMUHLE 600x200mm - after technical review - German production - PLANING HEIGHT ON TWO AND FOUR-SIDES 200 mm - ideal for wet wood - electric height adjustment - electric adjustment of the left head - double feed chain planing width 600 mm planing height on two and four sides 200 mm power of vertical spindle motors 2 x 8.6 kW motor power of the lower shaft 5.5 kW upper shaft motor power 7.5 kW guiding ruler electric height adjustment adjustable vertical heads four upper pulling rollers four lower pulling rollers two take-up pull rollers 4 knives per shaft diameter of shafts 150 mm six types of feed speed 7 / 9 / 11.5 / 14 / 18 / 23 m/min row of anti-recoil pawls spindle diameter 30 mm / 100 mm material pressure at the left head dimensions (length/width/height) 260 x 190 x 205 cm weight 3500 kg

REX U 41K four-sided planer - German production - DTR - numerical control - year of production 1997 - milling heads - for wet wood - total power 51.5 kW TECHNICAL PARAMETERS: - planing width 410 mm - planing height on 2nd and 4th side 260 mm - electronic adjustment of planing height and width with the possibility of programming fixed dimensions 1 lower shaft 7.5 kW 2 upper shaft 11 kW 3 right spindle 7.5 kW 4 left spindle 11 kW milling units 2 x 1.85 kW - feed smoothly adjustable electrically - feed speed range 5-30 m/min - 3 kW feed motor - five pull rollers in the tabletop - two auxiliary rollers in the tabletop - five upper pulling rollers - four pressure rollers on vertical spindles - pneumatic side pressure of the material - adjustable heads - adjustable lower shaft - minimum material length 400 mm Transport dimensions 420 x 230 x 230 cm weight ~ 5  ...

Four-sided planer REX HOMS-410 – made in Germany – for wet wood TECHNICAL PARAMETERS: planing width max. 410 mm planing height on both sides 200 mm planing height on four sides 200 mm spindle diameter 40 mm shaft motor power 2 x 11 kW spindle motor power 2 x 5.5 kW feed speed infinitely adjustable feed speed adjustable on the inverter three upper pulling rollers three lower pulling rollers two auxiliary rollers in the table top brake minimum workpiece length 450 mm dimensions of the machine (length/width/height) 250 / 220 / 180 cm weight ~ 3500 kg

KUPFERMUHLE four-sided planer with additional table, multi-saw 600x200mm - after technical inspection - German production - DOUBLE-SIDED PLANING HEIGHT 200 mm - ideal for wet wood - electric height adjustment - double feed chain - additional preliminary table with a 340 mm head - additional material feed systems TECHNICAL PARAMETERS: planing width 600 mm cutting height on both sides planing height on four sides 200 mm 100mm power of vertical spindle motors 2 x 5.5 kW lower shaft motor power 7.5 kW upper shaft motor power 11 kW engine power of the first head 4 kW multi-saw engine power 15 kW adjustable vertical heads four upper pulling rollers three lower pulling rollers two receiving pull rollers 4 knives per shaft, shaft diameter 145mm six types of feed speeds 7 / 9 / 11.5 / 14 / 18 / 23 m/min 2 rows of anti-kickback pawls spindle diameter 40 mm disc  ...

410mm planing width electrical height adjustment of the Thicknesser table 3,7KW 5HP 400V 50 Hz star-triangle switch Dressing table length 2000 mm Thickness length 860 mm (890 mm) 4 Column guide in the thicknessing table Planing height 250 mm Dual hinged dressing tables Dressing Guide from 45 ° to 90 ° now only a short time in the price with 4 Tersa knife shaft Special price: NET 4990,- . Options: The comfort package NET 390,-contains Digital display of the thickness table setting 2 Advance speeds 6 and 12 m/1 Thickness Planer table extension 4,8KW 6.6 PS 400V 50 Hz star-triangle switch

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Weibert form7 52 digital Dressing thickness Planer Planing width 520 mm Tersa 4 drum Dressing table length 2250 mm Planing stroke 1500 mm 90 °-45 ° Machine cast iron tables 7 KW (9,5 HP) 400V 50 HZ Thicknessing table 850x520mm Passage of 3 / 240mm Electrical height adjustment of the Thicknesser table 4 speeds 5 / 8 / 12 / 18 m / min Dual opening system of the tables to the rear Max depth of cut 5 mm Speed 5000 min/1 1-suction port 120 mm Weight approx. 700 kg G & PIECES 5503511

SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm

Weibert ADH 410C Abrichtdickenhobel Dressing table (LxW): 1640 x 425 mm Thick table (LxW):600 x 410 mm Working height 850 mm Thickness: 5-225 mm Max. chip acceptance 3 mm Planing shaft diameter: 70 mm Planing knife 3 Speed 5200 rpm Feed 7 m/min Engine: 3 kW 400 V 50HZ Suction nozzle diameter: 120 mm Weight 260 kg G&STÜ-5904041

Specifications: Planing width: 245 mm Planing depth: 0 - 4 mm Nominal stroke rate: idle 8500 1/min Cutting speed: 32.9 m/s Rated power consumption: 2300 W Weight: 13.2 kg Knife head diameter: 74 mm Universal motor: 230 V / 50 Hz

SD 410 Exhibition Machine Dressing thickness planer 410mm planing width electric height adjustment of the thickness table 4KW 400V 50HZ Star Triangle Switch Dressing table length 2000mm Thickness table length 860mm (890mm) 4 column guides in the thickness table Planing height 250mm Dressing tables can be folded up twice Dressing stop from 45° to 90° now only a short time in the price with 4 Tersa knife shaft G&RO-SD410TERSA Exhibition machine

– German production – corrugated top – year of production 1996 – rollers in the countertop pulling TECHNICAL PARAMETERS: planing width 230 mm planing height 160 mm corrugated top spindle diameter 40 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 bottom spindle 7.5 kW smoothly adjustable feed 6-36 m/min feed motor power 5.5 kW six upper steel pulling rollers two top rubber pulling rollers three rollers in the countertop pulling pneumatic feed pressure pneumatic shoe pressure spindles with brakes length of the pre-worktop 1970 mm electric height adjustment central lubrication (split) connection diameter 140 mm dimensions of the machine (L/W/H) 410 / 200 / 180 cm weight ~ 3000 kg

–DTR – German production – electric adjustment of the left head – adjustable spindles TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) bottom head 4 kW 2) right head 3) left head 5.5 kW 4) top head 4 kW 5) universal head 360° 4 kW feed motor 2.2 kW feed speed 5 – 20 m/min four steel pulling rollers two top rollers pulling rubber one pulling roller in the countertop feed on cardan shafts electric height adjustment length of the pre-worktop 1970 mm central lubrication pneumatic clamps dimensions of the machine (L/W/H) 380 / 200 / 170 cm weight ~ 2000 kg

– after technical inspection – year of production 1999 – chrome tops – electronic height setting TECHNICAL PARAMETERS: planing width 230 mm planing height 130 mm electric adjustment of the left head electric adjustment of the upper head electronic height adjustment five steel top rollers one top rubber roller spindle diameter 40 mm 1 bottom spindle 5.5 kW 2 right spindle 3 left spindle 7.5 kW 4 upper spindle 7.5 kW tool diameters 160 and 180 mm pneumatic clamps feed on cardan shafts smoothly adjustable feed 6-20 m/min feed motor power 2.2 kW chrome tops pre-table top length 1980 mm connection diameter 4 x 130 mm dimensions of the machine (L/W/H) 340 / 190 / 200 cm weight 2200 kg

- year of manufacture 2000 -DTR - electronic height and width adjustment - the ability to save fixed parameters TECHNICAL PARAMETERS: planing width 230 mm planing height 140 mm spindle diameter 40 mm 1 bottom spindle 7.5 kW 2 right spindle 5.5 kW 3 left spindle 5.5 kW 4 upper spindle 7.5 kW 5 bottom spindle 7.5 kW feed smoothly adjustable feed motor power 3 kW electronic height adjustment electronic adjustment of the left head feed on cardan shafts five upper steel pull rollers two pulling rollers rubber top one role in the countertop pulling pneumatic material pressure minimum material length 400 mm pre-table length 2000 mm chrome tables connection diameter 5 x 125 mm Machine dimensions (L / W / H) 370 / 200 / 190 cm weight ~ 3000 kg

– German production – year of production 1999 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm spindle diameter 40 mm feed 10 m/min feed motor power 3 x 0.85 kW first bottom spindle 4 kW second right spindle third left spindle 7.5 kW fourth top spindle 5.5 kW .max. diameter of horizontal / vertical tools 140 mm / 180 mm two upper steel pulling rollers one top roller rubber pulling one rubber roller in the countertop central lubrication of the table top table top length 2465 mm pneumatic clamps upper head shoe connection diameter 250 mm dimensions of the machine (L/W/H) 360 / 140 / 175 cm weight ~ 1000 kg

– German production – year of manufacture 2002 –DTR TECHNICAL PARAMETERS: planing width 230 mm planing height 170 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 bottom spindle 7.5 kW 6 upper spindle 7.5 kW spindle diameter 40 mm electric height adjustment five steel top rollers four rubber top rollers pneumatic pressure table top length 1980 mm central lubrication feed adjustable on the inverter 6-26 m/min feed on cardan shafts feed motor power 4 kW connection diameter 140 mm machine dimensions (L/W/H) 520 / 210 / 210 cm weight 4000 kg

– German production –DTR – for wet wood – hydrohebel TECHNICAL PARAMETERS: planing width 230 mm planing height 160 mm rollers in the countertop pulling spindle diameter 1-4 - 40 mm spindle diameter 5-6 - 50 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 bottom spindle 7.5 kW 6 upper spindle 7.5 kW feed motor power 4 kW feed adjustable smoothly on the inverter 5-26 m/min jointers on the last two heads five upper steel pulling rollers four top rollers rubber pulling four rollers in the countertop pulling pneumatic pressure feed on cardan shafts electric brakes electric height adjustment length of the pre-worktop 1950 mm connection diameter 140 mm dimensions of the machine (L/W/H) 685 / 230 / 230 cm weight 4000 kg

- German production - universal head 360" TECHNICAL PARAMETERS: - planing width 230 mm - planing height 130 mm - spindle diameter 40 mm 1 bottom spindle 5.5 kW 2 right spindle 4 kW 3 left spindle 4 kW 4 top spindle 4 kW 5 universal spindle 4 kW electric height adjustment feed on cardan shafts two types of feed speed pre-table top length 2500 mm minimum element length 350 mm connection diameter 140 mm Machine dimensions 450x170x160 cm weight ~ 1400 kg

–DTR – German production – electric adjustment of the left head – adjustable spindles TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) bottom head 5.5 kW 2) right head 3) left head 7.5 kW 4) top head 5.5 kW 5) universal head 360° 5.5 kW feed motor 2.2 kW feed speed 5 – 20 m/min four steel pulling rollers two top rollers pulling rubber one pulling roller in the countertop feed on cardan shafts electric height adjustment length of the pre-worktop 1970 mm central lubrication pneumatic clamps dimensions of the machine (L/W/H) 380 / 200 / 170 cm weight ~ 2000 kg

– after technical inspection – Italian production – year of manufacture 2011 TECHNICAL PARAMETERS: planing width 240 mm planing height 130 mm spindle diameter 40 mm spindle speed 6000 rpm 1 bottom spindle 3 kW 2 right spindle 7.5 kW 3 left spindle 5.5 kW 4 upper spindle 6 kW 5 bottom spindle 5.5 kW six upper pulling rollers pneumatic pressure feed adjustable on the inverter feed speed range 5-25 m/min adjustable heads table top length 2480 mm electric brakes connection diameter 2 x 180 mm and 2 x 150 mm dimensions of the machine (L/W/H) 340 / 160 / 170 cm weight 2480 kg

Planer WEINIG UNIMAT SUPER 4 – German production – very good condition – year of manufacture 2004 –DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools adjustable top head 1) bottom head 11 kW 6000 U/min 2) top head 18,5 kW 7000 U/min 3) bottom head 5,5 kW 6000 U/min feed motor 2,2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic pressure three upper fixed pulling rollers one rubber top roller corrugated top length of the pre-worktop 1950 mm total power 37 kW central lubrication Trzansport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Four side planer Griggio G240 P/5U for wet Maximum planing width 240mm Maximum planing height 160mm Number of spindles 5 Spindle arrangement Bottom Rights Left Mountain Universal Drive: in the table Infinitely adjustable feed on the inverter Year 2007 Weight: 4060 CE Certificate Net price

Four-sided planer WEINIG PROFIMAT 22N. No 4 –DTR – German production – year of manufacture 1988 – adjustable heads TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) bottom head 5.5 kW 2) head of the law 3) left head 7.5 kW 4) top head 7.5 kW feed engine 2.2 kW feed speed 6 – 20 m/min four steel top pulling rollers one upper rubber pulling roller one pulling roller in the countertop feed on cardan shafts electric height adjustment pre-table top length 1975 mm central lubrication pneumatic clamps dimensions of the machine (length / width / height) 350 / 200 / 170 cm weight ~ 1800 kg

Four-sided planer Weinig Profimat 23E Planing width 230mm Planing height 130mm Number of spindles 5 Spindle arrangement Bottom 4kw Right 7.5kw Left Top 7.5kw Bottom 4kw Spindle diameter 40mm Feed on cardan shafts Spindles with brakes Smooth feed regulation on the inverter 1-20m/min Pneumatic material pressure

Four-sided planer Ledinek 400/160/5 – Slovenian production – for wet wood – adjustable heads TECHNICAL PARAMETERS: planing width 400 mm planing height 160 mm spindle diameter 35 mm 1) bottom shaft 4 kW 2) upper shaft 5.5 kW 3) right head 4 kW 4) left head 4 kW 5) lower head 4 kW two feed speeds feed motor power 2.2 kW minimum material length 400 mm three upper toothed pulling shafts three upper smooth pulling rollers six upper pressure rollers pinion shaft pulling in the tabletop in front of the first head three auxiliary rollers in the top spigot diameter 5 x 110 mm machine dimensions (length / width / height) 310 / 180 / 170 cm weight ~2000 kg

Four-sided planer Weinig Hydromat 23C Planing width 20-230mm Planing height 8-160mm Number of heads 6 Head system Bottom 7.5kw Right 7.5kw Left 7.5kw Top 11kw Top 7,5kw Bottom 7.5kw Total power 54kw Pulling rollers in the working table 4 Pneumatic clamps 5 rows of gear pulling wheels 2 rows of rubber pulling wheels Feed speed adjustable on the inverter Soundproofing the cab in the machine CE Certificate Year 2000