133,684 used machines on RESALE, but how to find them? Machine Search
PART NUMBER: 7503 SPECIFICATIONS: - max planing width 610mm - max planing height on both sides 200mm - max planing height on four sides 100mm in advance: - 2 rubber pull rollers - 2 toothed pulling rollers - metal pulling roller - Pulling insertion shaft, toothed -Triggers -Pressure - pulling shaft, toothed 2 pcs -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - Pulling roller, smooth, metal -Pressure - profiling roller 7.5kW -Pressure - rubber pulling roller From below: - scoring unit, axle 35mm, axle length 130mm 2.2kW - guide strip 2 pcs - Introductory table top - Pulling shaft, smooth - planer shaft 610mm, 4-knife (2 knives installed) 7.5kW - 2 pulling shafts, smooth - Split metal skid roller - side pressure behind: - Side spindles + clamps 2 - 1) vertical right 95mm 4kW - 2) vertical left 95mm 4kW - spindle diameter 35mm - spindles adjust ...
Key data: 7 , 230 mm, 160 mm
SPECIFICATIONS: Maximum processing height: 160 mm Maximum machining width: 230 mm Length of inlet planer: 2100 mm Spindle diameter: 40 mm Number of Spindles: 7 (6 + 1 Universal) Grid table Shaft drive (3.7 kW) Self-braking motors Voltage: 380 V Spindle configuration: 1ST: BOTTOM (5.5 kW) 2ND: RIGHT (5.5 kW) 3.: LEFT movable (5.5 kW) 4TH: RIGHT (5.5 kW) 5TH: TOP (7.5 kW) 6TH: BOTTOM (7.5 kW) 7TH: UNIVERSAL SPINDLE 360° (7.5 kW)
Heavy Duty Four-Sided Combined Calibration Milling Planer with Additional Scoring Saw for Relief Grooves Detailed technical description in the PDF document (as an attachment in the photo gallery).
Number of boring spindles: 8 St. Working width: 20 - 230 mm Working height: 8 - 120 mm Length of the planing table: 2.500 mm Feed motor: 4 kW Feed speed: 5 - 24 m/min. total power requirement: ca. 60 kw Dimensions (L/W/H): mm weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of boring spindles: 4 St. Working width: 220 mm Working height: 120 mm Length of the planing table: 2.000 mm Feed motor: 1,5 kW Feed speed: 4,5 - 27 m/min. total power requirement: 15,5 kw Dimensions (L/W/H): 3.700 x 1.500 x 1.300 mm weight of the machine ca.: 1.600 kg turning speeds: 6.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 520 mm, 1750 mm, 4 St.
Surface planing machine 520mm Planing width, support table 1750mm, removal table 1150mm. - Aigner strip planer stop - Angle stop 90° -45°
SCM F5L planer Working width 500mm 4kw main motor 4-knife shaft Traditional knives Main fence adjustable at an angle up to 45 Table top length 2600mm
Weinig Profimat 23E four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Bottom 5.5kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 7.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pulling roller clamps Electric pressure beam adjustment Tabletop lubrication system Year of production 1998
Key data: 5 , 260 mm, 160 mm
Number of Spindles: 5 Spindle arrangement: u-r-l-o-u Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Working width adjustment: digital Working height adjustment: digital Feed speed: 20 m/min Table height constant: approx. 800 mm Bevel units: 1 Diameter of the suction nozzles: 140 mm Weight: 2500 kg Space requirement: 3650x1500x2000 mm Voltage/Frequency: 380V
Key data: 4 , 23 mm, 10 mm
Exhibition machine! Working width (mm): 23 - 180 Minimum workpiece length (mm): 300 Feed speed (r/min): 6 - 12 Engine: Feed: 0.7/1.1 kW (1/1.5 HP); Horizontal spindle (single): 7.5 kW (10 hp); Vertical spindles (single): 7.5 kW (10 hp) Speed (r/min): 6000 Spindle ø (mm): 35 Feed table length (mm): 1700 Working height (mm): 10 - 105 Suction nozzle ø (mm): 120
Key data: 410 mm, 240 mm, 4 kW
SCM 2041 FS Planer and Thicknesser Manufacturer SCM Italy AB 66989 Ref 110830 Year of manufacture approx. 1994, from school use in good condition 3 cutterblock Planing shaft speed 5000 rpm Planing: Table length 2000 mm Planing width 410 mm Support table length 1040 mm Support table length 910 mm Max. Chip thickness: 10 mm Jointing fence swivelling 0 - 45° Table adjustment for planer with rotary lever Pressure link vibration guard Thickness planing: Planing width 410 mm Max. chip thickness: 7.5 mm Chip thickness: 7.5 mm Min. planer thickness: 3 mm Max. planer thickness: 240 mm Planing thickness: 240 mm Thicknessing table length: 730 mm Sliding table roller Planing shaft speed 5000 rpm Feed speeds 6 and 10 m/min Height adjustment of thicknessing table with handwheel Infeed roller steel Exit roller steel Connections: Motor power: 4 kW with motor brake ...
Four-sided planer Weinig with glazing bead saw Type: P 23 Year of Make: 1995 Planing width 230 mm Planing height 130 mm 6 planing shafts + glazing bead saw Shaft arrangement 1 Bottom 4 kW 2 right-hand lifting spindle clocked with 3 Left 7.5 kW 4 Top-clocked shaft 5.5 kW 5 Bottom 5.5 kW Glass bead saw Spindle diameter 40 mm Right and left shafts are driven by 1 motor with manual Waxilit pump with distributor for extraction pipes fully equipped with planer heads as well as 4 additional milling heads good, ready-to-use condition
x-travel: NA mm y-travel: NA mm workpiece height: mm stroke length max.: 450 mm table length: 450 mm table width: 350 mm total power requirement: 1,7 kW weight of the machine ca.: t dimensions of the machine ca.: m Shaper, horizontal,mechanic,vice hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 250 mm, 750 mm, 2 St.
ABH (Beuving) Chico Vlakbank Merk: ABH Type: Chico A3 Schaafbreedte 250 mm Spaanafname Max. 8 mm Aanvoertafel 750 mm Afvoertafel 750 mm Total panel length 1,500 mm Chisel-as Z-2 ø90 mm
Key data: 5 , 120 mm, 230 mm
Planing and moulding machine Profimat 23 E Working width: 230 mm Working height: 120 mm Dressing table length: 2000 mm Spindle arrangement 1: Dressing 5.5 kW, 6000 rpm, 40 mm diameter 2+3 Left+ Right 7.5 kW, 6000 rpm, 40 mm diameter 4: Thickness 5.5kW, 6000rpm, 40mm diameter 5: Bottom 4kW, 6000rpm, 40mm diameter Feed motor: 2.2 kW Feed speed infinitely variable 0-24 m/min Milling heads with adjustment gauge Total power requirement: 27 kW Dimensions set-up: 3400 x 1650 x 1970 mm Machine weight, approx.: 3500 kg
Key data: 410 mm, 220 mm
Dressing and thickness planing machine TOP Master FS 410 Function tested Working width: 410 mm Max. planing thickness: 220 mm 4-knife shaft Dressing table length: 2000 mm 2 feed speeds Feed and Pull Roller: Steel Table rollers Tiltable stop Very good condition Weight approx. 900 kg
PART NUMBER: 7679 SPECIFICATIONS - max planing width 610mm - max planing height on both sides 200mm - electric top, up/down adjustment - max planing height on four sides 100mm –in advance: - Pulling insertion shaft, toothed - Flingers -Pressure - 2 pulling shafts, toothed -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - pulling shaft, smooth, outfeed – from below: - guide strip - pulling roller, toothed - planer shaft 610mm, 4-knife 5.5kW - 2 smooth, pulling shafts –behind: - 2 side spindles + clamp 1) Vertical right 100mm 4kW 2) Vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - Manual planing width setting - 6 types of feed speeds: 7/9/11.5/14/18/23m/min - feed motor 3.1kW - dimensions length/width/height 2500x1800x600mm - weight about 3000kg ADVANTAGES – ideal for processin ...
Key data: 6 , 190 mm, 120 mm
SPECIFICATIONS: Feed length: 1900 mm Machinable width: 190 mm Machinable height: 120 mm Spindle Ø 35 mm Number of Spindles: 6 Chain drive SPINDLE CONFIGURATION: Bottom (3 kW) Right (2.2 kW) Top (4 kW) Bottom (4 kW) Right (4 kW) Left (4 kW)
Key data: 4 , 180 mm, 105 mm
Profiset 40 EP with 2 axis control and 99 programs Finished size maxi. 180.mm / mini. 25.mm Engines. 2 x 7.5 KW 380 V. 50 H. Dressing table 2300 mm Feed roller in front of the dressing room 4 x planer heads TERSA Suisse 1st year warranty after delivery and commissioning
Key data: 500 mm, 8 mm, 6 kW
Martin T54 Surface Planer, with Tersa Z-4 and Hydraulic Table Lift Brand: Martin Type: T54 Year of Make: 1997 M. No.: V240171 Motor power: 5.5 kW Knife shaft: 5,000 tpm Z-4 Tersa Solid Steel Shaft ø125 mm Planing width: 5 Spahn removal: 8 mm Table length: 2,850 mm Task - table length: 1,640 mm Acceptance - table length: 1,200 mm Table height: 855 mm Dressing fence: 45° tiltable with Dun planing bar and width adjustment on lineair guides Weight: 1,200 KG Option: SuvaMatic protection device Condition: Full-function tested
Key data: 500 mm, 1640 mm, 4 St.
Martin T52 Surface Planer Brand Martin Type T52 Year of manufacture 1987 M. Nr V 151674 Motor power 5.5 kW (7.5 hp) Knife shaft speed 5000 rpm Knife shaft Z-4 Circle ø125 mm Planing width 500 mm Blade length 510 mm Spahn removal 8 mm foot pedal adjustment with display at table level Table length 2840 mm Task - Table length 1640 mm Acceptance - table length 1200 mm Table height 800 mm Dressing tank 1,100165mm Tilt 45° Weight approx. 950 KG Condition: Function tested
Key data: 500 mm, 1640 mm, 4 St.
Martin T52 Surface Planer Brand Martin Type T52 Year of manufacture: 1986 M. No V144098 Motor power 5.5 kW (7.5 hp) Knife shaft speed 5000 rpm Knife shaft Z-4 Tersa Circle ø125 mm Planing width 500 mm Blade length 510 mm Spahnabnahme Praxis 16 mm foot pedal adjustment with display at table level, limited to 8 mm for safety. Table length 2840 mm Task - Table length 1640 mm Acceptance - table length 1200 mm Table height 800 mm Dressing tank 1,100165mm Stop tilt 45° Weight approx. 950 KG Condition: Function tested
Key data: 630 mm, 8 mm, 8 kW
Panhans 446-B Dressing-Thickness Planer Combi Machine Brand: Panhans Type: 446B Year of Make: 2005 Planing width dressing/thickness planer: 630mm Knife shaft: ø120 - Z-4 Speed: 5,000 rpm Engine: 7.5 kW Planing height: 4- 225 mm Table length dressers: 2,250 mm Table length thicknesses: 1,040 mm Extra Uitvoer taflelengte: 1.000 mm, automatische hoogte versetlling met tafelblad Chip removal: max. 8 mm Feed: 7 + 14 m/min. Weight: 1,300 KG Extraction ø160 mm Condition: Fully functional tested
Waco planing line HM-225 with bundling and stacking, High speed planing line 120 m/min with de-stacking and infeed system, outfeed with bundling and automatic stacking system, Consisting of:, - Infeed with tilt hoist, - Unscrambler, - Automatic infeed system, - Waco moulder, type HM-225, 9 spindles: B-T-B-R-L-R-L-T-B, max. 120 m/min, - Outfeed with buffer conveyor, - Semi-automatic bundle, - Mosca strapping machine, - Stacking system, - Outfeed for wood packages
Key data: 510 mm
Rex Trainers Surface planing machine Type A 510/3 Machine No. 18.752 Year of manufacture 1980 Working width 510 mm 2 knife shaft Slit table lips Chip removal 6.5 mm Table length 1550 mm + 1180 mm Stop length 1000 mm, height 140 mm Swivel stop Blade shaft speed 5500 rpm. Motor power 4.0 kW Extraction connection diameter 140 mm Weight with pallet 635 kg Dimensions 2800 mm x 950 mm x H 1000 mm
used
Stroke speed cut/return: 80m/min, feed cross support/long support: 27mm/stroke, table dimensions X/Y: 4000mm/1250mm, max. table load (table center): 2000kg, tool holder: planing steels with rectangular cross-section, tool dimensions X/Y: 50mm/50mm, bed length: 9400mm, planing length: 4500mm, planing width: 1520mm, planing height without/with cross support: 1310mm/1250mm, connected load: 64kVA. Total system dimensions X/Y/Z: approx. 10000mm/3300mm/2500mm, weight: approx. 26000kg, foundation weight: 60000kg. The machine was electrically re-equipped in 1986. Documentation available. On-site inspection is possible.
Key data: 4 , 180 mm, 110 mm
SPECIFICATIONS: Length of the planer: 2300 mm Working width: 180 mm Working height: 110 mm Spindles: Ø 35 mm Number of spindles: 4 Chain drive (1.70 kW) Speed: 6000 rpm Installed power: 16.5 kW Voltage: 380 V SHAFT CONFIGURATION: I bottom (5.5 kW) II right (5.5 kW) III left (5.5 kW) IV top (5.5 kW) EQUIPMENT: 01 Unloader 01 Return Conveyor
Key data: 510 mm, 2850 mm, 4 St.
Martin T54 Surface Planer Brand: Martin Type: T54 Year of manufacture: 2018 M. No.: V555076 Control panel: Sliding control panel with stop, digital readout, electric planing thickness adjustment Motor power: 5.5 kW Knife shaft speed: 6,000 tpm (increased speed) Knife shaft: X-Plane ø125 mm Contactor: Suvamatic Planing width: 5000 mm Dressing stop: 45° tiltable with Dun planing bar Spahn removal: 8 mm Table length: 2,850 mm Task - table length: 1,640 mm Acceptance - table length: 1,200 mm Table height: 850 mm Weight: 1,400 KG
Key data: 4 , 180 mm, 120 mm
SPECIFICATIONS: Length of the planer: 1700 mm Working width: 180 mm Planing height: 120 mm Spindles: Ø 35 mm Number of spindles: 4 Chain drive (1.70 kW) Speed: 6000 rpm Installed power: 16.5 kW Voltage: 380 V CONFIGURATION OF THE SPINDLES: I bottom (5.5 kW) II right (5.5 kW) III left (5.5 kW) IV top (5.5 kW)
An old plano milling machine (guideway grinding machine) Waldrich Coburg is available. Bed length: 5500mm, bed width: 750mm, machine dimensions X/Y/Z: approx. 12000mm/300mm/3000mm, weight: approx. 37500kg. An on-site inspection is possible.
Weinig Profimat 22N four-sided planer Working width 220mm Working height 120mm Number of spindles: 4 Spindle arrangement Bottom 4wkw Rights Left 5.5kw Top 4kw Feed speed adjustable by variator 4-20m/min Total power 16kw
Number of boring spindles: 4 St. Working width: 220 mm Working height: 120 mm Length of the planing table: mm Feed motor: 2,2 kW Feed speed: 5 - 22 , Stufenlos m/min. total power requirement: 17 kw Dimensions (L/W/H): 3.310 x 1.740 x 1.700 mm weight of the machine ca.: kg spindle diameter: 40 mm turning speeds: 6.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 4 , 240 mm, 130 mm
SPECIFICATIONS: Feed length: 2500 mm Machining width: 240 mm Processing height: 130 mm Spindles: Ø 40 mm Number of Spindles: 4 Shaft drive (2.9 kW) Installed power: 24 kW Voltage: 380 V CONFIGURATION OF THE SPINDLES: I bottom (5.5 kW) II right (7.5 kW) III left with electronic sideshift (7.5 kW) IV top (7.5 kW) EQUIPMENT: Complete with tools
Control: Siemens 840 D weight of the machine ca.: 13,5 t dimensions of the machine ca.: 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 530 mm, 2900 mm, 4 St.
SPECIFICATIONS: Table size: 2900 x 530 mm Working width: 530 mm Roller with 4 knives
4-Wellen Hobelautomat SCM COMPACT 23 Gebraucht Maschine 4 spindeln Betriebszustand: exzellent CE-Zeichen: Ja volt. 380/50 mit werkzeug: Ja . No.04 Werkzeuge mit austauschbar Einwegmessern Kompositionsmaschine : 1st Spindel: Hobel. Motorleistung PS 5.5 (Kw 4) 2° Spindel und 3° Spindel : rechts vertikal und links vertical . Motorleistung PS 7.5 (Kw 5.5) 4th Spindel: Dickenhobel. Motorleistung PS 5.5 (Kw 4) Technische Details : 2-Gang-Vorschub. Motorleistung PS 1.3/1.7 (Kw 1/1.3) wellendrehzahl U/min 6000 Vorschubgeschwindigkeit : 6 / 12 mt./min max. nutzbare Arbeitsbreite mm. 230 max. nutzbare Arbeitshöhe mm. 125 wellendurchmesser mm.40 einlasslänge mm. 2300 SchmierSystem elektrische Höhenverstellung. motorleistung: 0.5 HP (0.37 kW) Gewicht kg. 1600 Bedienungsanleitung CE-zertifizierung
automatische 4-wellen hobelautomat modell FUTURA MODUL 4 220 Gebraucht Maschine 4 spindeln Betriebszustand: exzellent CE-Zeichen: Ja volt. 380/50 mit werkzeug: Ja . No.04 Werkzeuge mit austauschbar Einwegmessern kompositionsmaschine (4 Spindeln, 4 unabhängige Motoren): 1st Spindel: Hobel. Motorleistung PS 5.5 (Kw 4) 2nd Spindel : rechts vertikal . Motorleistung PS 4 Kw 3) 3rd Spindel : links vertical . Motorleistung PS 4 Kw 3) 4th Spindel: Dickenhobel. Motorleistung PS 5.5 (Kw 4) Technische Details : 2-Gang-Vorschub. Motorleistung PS 1.3/1.7 (Kw 1/1.3) wellendrehzahl U/min 6000 Vorschubgeschwindigkeit : 8 / 16 mt./min max. nutzbare Arbeitsbreite mm. 220 max. nutzbare Arbeitshöhe mm. 120 wellendurchmesser mm.40 einlasslänge mm. 2300 SchmierSystem elektrische Höhenverstellung. motorleistung: 0.25 HP (0.2 kW) gesamtleistung installiert PS 18,6 (Kw 14) Bedienun ...
Key data: 4 , 180 mm, 105 mm
Profiset 40 EP with 2 axis control and 99 programs Finished size maxi. 180.mm / mini. 25.mm Engines. 2 x 7.5 KW 380 V. 50 H. Dressing table 2300 mm Feed roller in front of the dressing room 4 x planer heads TERSA Suisse 1st year warranty after delivery and commissioning
Number of spindles: 8 St. Working width: 230 mm Working height: 120 mm Weinig Planing and moulding line ------------------------------- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 4 , 230 mm, 120 mm
Chambon Made in France Four-way planer with 2 axis control (width and height) Maximum 230 x120mm Minimum 25x6 mm Feed. 6 and 12m/min. Engines; Pos. 1-2-3 = 5.5 KW Motor: Position 4 = 7.5 KW Tools: 4 planer heads standard Immediately available from stock
turning speeds: 2905 U/min weight: 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Weinig Profimat 26 Super four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle system 7.5kw Down Left 11kw rights Mount 75kw Down 5.5kw Pneumatic clamps divided into 2 sections Feed speed adjustable by variator 5-24m/min CE Certificate Technical documentation Net price 68,000zł
Dimensions (L/W/H): 37,8 mm Weight: 5500 kg Total power requirement: 37, kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 4
Technical data/equipment: 4 planing shafts Voltage 380 V/ 50 Hz Power consumption 20 kW Weight approx. 1500 kg More dates to follow The sale is carried out on behalf of the owner, in the condition as it is, excl. Warranty.
Dimensions (L/W/H): 3760x1730x1750 mm Weight: 4500 kg Total power requirement: 37,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Weinig Hydromat 23C four-sided planer Working width 230mm Working height 160mm Number of spindles 7 Spindle layout: 1.Down 15kw 2.7.5kw rights 3.Left 7.5kw 4.Top 15kw 5.Lower 30kw (multi-saw) 6.Lower 7.5kw (hydro support) 7.Upper 7.5kw (hydro support) Spindle speed 6000r.p.m Spindle Diameter 50mm 4 pulling rollers in the working table Inverter-adjustable feed speed up to 36m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation
Weinig Profimat 22N four-sided planer Working width 220mm Working height 120mm Number of spindles 6 Spindle layout: Lower 4kw Rights Left 5.5kw Upper 5.5kw Lower 4kw Universal 4 Feed speed adjustable by variator 6-22m/min 3kw feed motor power Adjustable spindles
Dimensions (L/W/H): 4280x1900x1700 mm Weight: 4600 kg Total power requirement: 38,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
