planing used for sale

Weibert WJ-FS32-W7 Dressing thickness planer 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables G&2972-2036-W7

Key data: 4 mm, 80 , 20

Heavy Duty Four-Sided Planer Still in operation until the end of July 2024! Detailed technical description in the PDF document (attached in the photo gallery).

4 SIDE PLANER machine model GUILLET KXR with n.4 spindles second hand machine in Excellent working condition - Composition : 1° shaft : surface planer . motor power Hp 7,5 2° and 3° shaft : spindle moulder . motor power Hp 7,5 4° shaft : thickness planer . motor power Hp 7,5 inlet length mm. 2000 feed speed: from 4,5 to 27 mt./min . motor power Hp 2 automatic lifting. motor power Hp 0.35 vertical and horizontal movement of 2nd and 3rd shaft vertical and horizontal movement of 4th shaft max. useful working width mm. 220 max. useful working height mm. 120 weight kgs. 1600 volt. 380/50

Key data: 5 , 230 mm, 130 mm

I sell the Weinig Unimat 300 four-sided planer, built in 2004 Feed speed 5-30 m/min. Working width 230mm Working height 130mm 5 Spindle Configuration: bottom - right - left - up - down Combined power 28kW 3-zone pneumatic pressure Good condition. Fully operational! Available soon. Includes full documentation and CE certification.

Weibert SD 510 Dressing thickness planer including 4-tersa knife shaft Planer width 510mm Dressing table length 2250mm Planer fence 1500 mm 90°-45° Machine Grey Cast Iron Tables 5.5 KW (7.5 HP) 400V Thicknessing table 1050 x 510mm Passage of 250mm Numerical display thickness table Electric height adjustment of the thickness table 2 infeed speeds 6 & 12 m/min Dual folding system of the tables to the rear Weight of 900 kg G&RO-SD510NE-TER

Weibert FS 32 Dressing thickness planer Planing width 320 mm 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables WJ-300100

Key data: 530 mm, 3000 mm, 4 St.

SPECIFICATIONS: Working dimensions mm: 3000 x 530 Speed 5000 rpm Number of knives: 04 Installed capacity: KW 5.5

SPECIFICATIONS Pilot plane on the entrance side: 2000 mm Grooved table Machinable width: max. 180 mm Machinable height: max. 150 mm Spindle diameter: 40 mm Shaft drive Drive shaft power: 4.0 Kw Soundproof booth Spindle Configuration: I Shaft: Bottom 4.0 kW II Shaft: Right 4.0 kW III Shaft: Left 5.5 kW IV Shaft: Right 5.5 kW V Shaft: Top 11.0 kW VI Shaft: Bottom 4.0 kW VII Shaft: Top 11.0 kW VIII Shaft: Universal 4.0 kW

SCM fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

Surface Grinding Machine BLANCHARD type 20D Shelf diameter: Ø 915 mm Shelf speed: from 5 to 27 RPM Grindstone diameter: Ø 500 mm Maxi height under wheel: 450 mm Spindle motor: 30 CV - 715 RPM Electromagnetic chuck Rapid Up/Down Voltage 220 V Tri Dimensions (L x W x H): 3700 x 2000 x 2600 mm Weight: 6 T

Key data: 6 , 200 mm

Front side planer / automatic planer

Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Spindle arrangement Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material clamps divided into 4 sections Feed speed adjustable by variator 4-24m/min Input table length 1980mm Drive on cardan shafts Thick soundproof cab Machine dimensions 380x226x178cmH CE Certified

2 KW, 400 V, 50 Hz, 3-knife shaft 250 mm, Chip removal max. 3 mm, Thickness height max. 180 mm, Dressing tables each 525x255 mm, Thickness table 600x250 mm, Dressing stop adjustable up to 45°, Suction nozzle 100 mm, Weight 147 kg

Key data: 410 mm, 2 St.

Loading table each 1200 mm, 4 Kw, weight approx. 500 kg

Key data: 4

EXHIBITION MACHINE Specifications: - Max. dimension (WxH) Finished part 180x105mm - Working width min. 23mm - Working height min. 6mm - Long min. single workpieces 300mm - Feed speed 6 - 12m/min. - Spindle speed 6,000 rpm. - Spindle diameter 35mm - Usable length horizontal spindle 190mm - Usable length vertical spindle 120mm - Adjustment of feed table and infeed guide 10mm - Horizontal spindle tool diameter 100mm - Min./Max. tool diameter Verticel spindle 100/124mm - Roll forming option Verticel spindle 12mm - Unit adjustment range for the planing heads +/- 1mm - Motor power horizontal spindle 7.5 kW - Motor power Verticel spindle 7.5kW - Motor power feed 0.75 / 1.1 kW - Length of material feeding table 2300mm - Diameter of extraction hoods 1x150mm, 2x120mm

Weibert FS32 Spiral Dressing thickness planer FS32 Dressing Thickness Planer with Spiral Knife Shaft Weibert FS32 Planing width: 320mm Spiral knife shaft Motor power: 4KW n=4500rpm, 400V Passage height: 4-225mm Professional stop Digital height adjustment WJ-300100 Special price: OPTIONS AT EXTRA COST: Slotted Hole Drilling Device Wescott Drill Chuck 0-16mm Driving equipment Dressing table extension adjustable 750mm

Weinig H30N four-sided planer Working width 300mm Working height 200mm Number of spindles 5 Spindle system: Bottom 11kw Right 11kw Left 11kw spindle angle adjustable up to 90° Right 7.5kw spindle angle adjustable up to 45° Top 11kw Feed speed adjustable via variator up to 22m/min 9kw Feed Motor Drive in the work table: – 3 rows of grooved pulling rollers in front of the first head – 5 rows of smooth pulling rollers Top drive: – 9 rows of pulling rollers Machine weight 6100kg Machine dimensions 470x190x160cmH

Thicknesser SP 400 Working width 400mm Working height 250mm Electric lifting and lowering of the worktop 4-knife shaft with traditional knives Plough shaft speed 5000r.p.m 4kw main motor Extraction spigot fi120 Machine dimensions 800 x 1000 x 1080mmH Weight 410kg Net price

Key data: 6 , 220 mm, 120 mm

WEINIG 4-sided planing machine model U22A with soundproof cabin Spindle arrangement: R - L - R - O - U - L

PISANI TR4 4-shaft beam planer: – working dimensions L=400 x H=300 mm – variable feed speed – motorized width and thickness adjustment, with digital displays on the control panel – pneumatic approaches at the inlet and in the machine center – with idle roller conveyors at the machine inlet and outlet – complete with 4 knife heads – total installed power 55 kw, volt 380 – weight about 5500 kg Trees: – under 11 kW / 15 HP – above 18.5 kw / 25 hp – right kw 11 / hp 15 – left kw 11 / hp 15 Machine not CE compliant, for export

Key data: 4 , 180 mm, 120 mm

Connected load 380V 46A Planing width 180 mm Planing height 120 mm Length of mounting table 2300 mm 4x Leitz reversible knife heads with 4 knives each 2x feed speeds Electric height adjustment 4x star-delta switch 2x Low Pressure Holder Iewdlj0 1x Side Pressure Holder 2x steel feed shafts 1x rubberized pull-out roller Extraction connection 4x120 mm Workshop overhauled

Key data: 4 , 180 mm, 105 mm

Planing width min max 23 – 180 mm Planing height min max 6 – 105 mm Min workpiece length 300 mm Feed speed 6 and 12 mm Spindle speed 6000 rpm Spindle 35 mm Vertical shaft engine 7.5 kw / 10 hp Horizontal shaft motor 7.5 kw / 10 hp Clamping length of vertical shafts 120 mm Clamping length of horizontal shafts 190 mm Min max tool diameter On vertical shafts 100-120 mm Profiling option without axial adjustment on the vertical shafts Feed rollers D 120 mm Dressing table length 1700 mm Manual lubricant pump included as standard Planer heads Tersa (on request) Suction nozzle D 120 mm 4 pcs. Ce version

Key data: 500 mm, 2850 mm, 3 St.

Power connection 400V 4.0kW Planing width 500 mm Extraction 1x140 mm Stop angle adjustment 3-knife shaft with strip planer blades WxDxH: 2850 x 910 x 940 mm Weight approx. 750 kg Workshop overhauled

Surfaces reference plates, roughness measures MASSI planing TGL 4763 Rz 1.0 μm - Rz 10 μm in wooden box Dimensions: 345 x 125 x 40 mm

Weinig Unimat 1000 Star four-sided planer Working width 20-230mm Working height 8-160mm Number of spindles 6 Spindle system: Bottom 5.5kw 6000r.p.m Right 4kw 7000r.p.m Left 5.5kw 7000r.p.m Mountain 7.5kw 7000r.p.m Bottom 7.5kw 7000r.p.m Universal 7.5kw 7000r.p.m Automatic height and width setting Automatic Countertop Lubrication Pump Countertop driven rollers (1 corrugated roller for wet wood) Pusuw speed adjustable by variator 5-24m/min Weinig EM10 automatic material feeder

Surfaces of reference plates, roughness measures MASSI planing TGL 4763 Rz 10 μm - Rz 80 μm in wooden box Dimensions: 345 x 125 x 40 mm

Surfaces Reference plates, roughness measures MASSI planing TGL 4763 Rz 6.3 μm - Rz 160 μm in wooden box used, tested ! Dimensions: 345 x 125 x 35 mm

Surface comparison plate set, roughness measures MASSI Planing, face milling, turning TGL 4763 Planing: Rz 6,Rz 3 μm - Rz 160 μm Face milling: Rz 6.3 μm - Rz 80 μm Turning: Rz 3.2 μm - Rz 80 μm in 3 wooden boxes used, tested ! Dimensions: 345 x 125 x 105 mm

Surface reference plates, roughness measures MASSI planing TGL 4763 Rz 6.3 μm - Rz 160 μm in wooden box Dimensions: 345 x 125 x 40 mm

Key data: 500 mm, 2800 mm, 3 St.

SPECIFICATIONS: Working width: max. 500 mm 2 tables with a total length of: 2800 mm Installed power: 5 kW Roller with 3 knives

PART NUMBER: 7503 SPECIFICATIONS: - max planing width 610mm - max planing height on both sides 200mm - max planing height on four sides 100mm in advance: - 2 rubber pull rollers - 2 toothed pulling rollers - metal pulling roller - Pulling insertion shaft, toothed -Triggers -Pressure - pulling shaft, toothed 2 pcs -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - Pulling roller, smooth, metal -Pressure - profiling roller 7.5kW -Pressure - rubber pulling roller From below: - scoring unit, axle 35mm, axle length 130mm 2.2kW - guide strip 2 pcs - Introductory table top - Pulling shaft, smooth - planer shaft 610mm, 4-knife (2 knives installed) 7.5kW - 2 pulling shafts, smooth - Split metal skid roller - side pressure behind: - Side spindles + clamps 2 - 1) vertical right 95mm 4kW - 2) vertical left 95mm 4kW - spindle diameter 35mm - spindles adjust ...

Key data: 7 , 230 mm, 160 mm

SPECIFICATIONS: Maximum processing height: 160 mm Maximum machining width: 230 mm Length of inlet planer: 2100 mm Spindle diameter: 40 mm Number of Spindles: 7 (6 + 1 Universal) Grid table Shaft drive (3.7 kW) Self-braking motors Voltage: 380 V Spindle configuration: 1ST: BOTTOM (5.5 kW) 2ND: RIGHT (5.5 kW) 3.: LEFT movable (5.5 kW) 4TH: RIGHT (5.5 kW) 5TH: TOP (7.5 kW) 6TH: BOTTOM (7.5 kW) 7TH: UNIVERSAL SPINDLE 360° (7.5 kW)

Heavy Duty Four-Sided Combined Calibration Milling Planer with Additional Scoring Saw for Relief Grooves Detailed technical description in the PDF document (as an attachment in the photo gallery).

Key data: 520 mm, 1750 mm, 4 St.

Surface planing machine 520mm Planing width, support table 1750mm, removal table 1150mm. - Aigner strip planer stop - Angle stop 90° -45°

Weinig Profiamt 22N four-sided planer Working width 230mmm Working height 120mm Number of spindles 5 1.Bottom 4kw 2.Rights 3.Left 5.5kw 4.Top 5.5kw 5.Universal 4kw Pneumatic material clamps Feed speed adjustable via variator 6-22m/min Feed motor 2.2kw Automatic worktop lubrication Worktop air cushion Length of the material insertion table 1970mm

Weinig Profimat 23E four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Bottom 5.5kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 7.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pulling roller clamps Electric pressure beam adjustment Tabletop lubrication system Year of production 1998

SCM F5L planer Working width 500mm 4kw main motor 4-knife shaft Traditional knives Main fence adjustable at an angle up to 45 Table top length 2600mm

Key data: 410 mm, 240 mm, 4 kW

SCM 2041 FS Planer and Thicknesser Manufacturer SCM Italy AB 66989 Ref 110830 Year of manufacture approx. 1994, from school use in good condition 3 cutterblock Planing shaft speed 5000 rpm Planing: Table length 2000 mm Planing width 410 mm Support table length 1040 mm Support table length 910 mm Max. Chip thickness: 10 mm Jointing fence swivelling 0 - 45° Table adjustment for planer with rotary lever Pressure link vibration guard Thickness planing: Planing width 410 mm Max. chip thickness: 7.5 mm Chip thickness: 7.5 mm Min. planer thickness: 3 mm Max. planer thickness: 240 mm Planing thickness: 240 mm Thicknessing table length: 730 mm Sliding table roller Planing shaft speed 5000 rpm Feed speeds 6 and 10 m/min Height adjustment of thicknessing table with handwheel Infeed roller steel Exit roller steel Connections: Motor power: 4 kW with motor brake  ...

Key data: 5 , 260 mm, 160 mm

Number of Spindles: 5 Spindle arrangement: u-r-l-o-u Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Working width adjustment: digital Working height adjustment: digital Feed speed: 20 m/min Table height constant: approx. 800 mm Bevel units: 1 Diameter of the suction nozzles: 140 mm Weight: 2500 kg Space requirement: 3650x1500x2000 mm Voltage/Frequency: 380V

Key data: 4 , 23 mm, 10 mm

Exhibition machine! Working width (mm): 23 - 180 Minimum workpiece length (mm): 300 Feed speed (r/min): 6 - 12 Engine: Feed: 0.7/1.1 kW (1/1.5 HP); Horizontal spindle (single): 7.5 kW (10 hp); Vertical spindles (single): 7.5 kW (10 hp) Speed (r/min): 6000 Spindle ø (mm): 35 Feed table length (mm): 1700 Working height (mm): 10 - 105 Suction nozzle ø (mm): 120

SCM surface planer mod. Used F410 useful working width mm. 410 total length of the tops mm. 2610 Nr. 4 knives Year of manufacture 2000 EC

Four-sided planer Weinig with glazing bead saw Type: P 23 Year of Make: 1995 Planing width 230 mm Planing height 130 mm 6 planing shafts + glazing bead saw Shaft arrangement 1 Bottom 4 kW 2 right-hand lifting spindle clocked with 3 Left 7.5 kW 4 Top-clocked shaft 5.5 kW 5 Bottom 5.5 kW Glass bead saw Spindle diameter 40 mm Right and left shafts are driven by 1 motor with manual Waxilit pump with distributor for extraction pipes fully equipped with planer heads as well as 4 additional milling heads good, ready-to-use condition

A Weinig four-sided planer including automation, double cross-cut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Kellfass automation unit consisting of double cross-cut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. On-site inspection is possible.

Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible.

x-travel: NA mm y-travel: NA mm workpiece height: mm stroke length max.: 450 mm table length: 450 mm table width: 350 mm total power requirement: 1,7 kW weight of the machine ca.: t dimensions of the machine ca.: m Shaper, horizontal,mechanic,vice hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm, 2100 mm, 3 St.

SPECIFICATIONS: Table dimensions: 2100 x 400 Roller with 3 knives EQUIPMENT: 01 Knife adjustment device 03 Spare blades

Key data: 5 , 120 mm, 230 mm

Planing and moulding machine Profimat 23 E Working width: 230 mm Working height: 120 mm Dressing table length: 2000 mm Spindle arrangement 1: Dressing 5.5 kW, 6000 rpm, 40 mm diameter 2+3 Left+ Right 7.5 kW, 6000 rpm, 40 mm diameter 4: Thickness 5.5kW, 6000rpm, 40mm diameter 5: Bottom 4kW, 6000rpm, 40mm diameter Feed motor: 2.2 kW Feed speed infinitely variable 0-24 m/min Milling heads with adjustment gauge Total power requirement: 27 kW Dimensions set-up: 3400 x 1650 x 1970 mm Machine weight, approx.: 3500 kg

Key data: 410 mm, 220 mm

Dressing and thickness planing machine TOP Master FS 410 Function tested Working width: 410 mm Max. planing thickness: 220 mm 4-knife shaft Dressing table length: 2000 mm 2 feed speeds Feed and Pull Roller: Steel Table rollers Tiltable stop Very good condition Weight approx. 900 kg

Key data: 250 mm, 750 mm, 2 St.

ABH (Beuving) Chico Vlakbank Merk: ABH Type: Chico A3 Schaafbreedte 250 mm Spaanafname Max. 8 mm Aanvoertafel 750 mm Afvoertafel 750 mm Total panel length 1,500 mm Chisel-as Z-2 ø90 mm

Key data: 6 , 190 mm, 120 mm

SPECIFICATIONS: Feed length: 1900 mm Machinable width: 190 mm Machinable height: 120 mm Spindle Ø 35 mm Number of Spindles: 6 Chain drive SPINDLE CONFIGURATION: Bottom (3 kW) Right (2.2 kW) Top (4 kW) Bottom (4 kW) Right (4 kW) Left (4 kW)