pl used for sale

Model: PLT-400 Year: 2022 Condition: Used Serial Number: 10492297 Stock Number: 3190J Belt width: 400 mm Product thickness 3 - 51 mm Belt speed: 0.36 - 24 m/min Compressed air: 0.7 l/min Power: 3 x 400V, 50Hz, 3kW Dimensions: 3300 x 1100 x 1500 mm Weight: 650 kg With extra long infeed conveyor of 1600 mm

BIG Hydraulic Dozer Blade, - Angle adjustment right - left, - width 210 cm, - Net weight 336 kg, - Wheel height adjustable, - Category 2, - Steel share HB500, - support foot

Key data: 2000 mm, 23 mm, 18 mm

4-roll plate bending machine Imcar-Italy capacity 2000 x18/23 mm year 1995, model 4RH12/3 , TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 18 mm Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed

Key data: 2000 mm, 6 mm, 10 mm

4 ROLL HYDRAULIC PLATE BENDING MACHINE MODEL M2006P _NC EASY COMMAND 15” -MATR. C072/25 MACHINE NEW PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BEND BRAND MG SRL ITALY CNC_PROGRAMMABLE AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls dimensions: -Surface length mm. 2050 -Top roll  mm. 160 - Lower roll  mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, plate edges pre-bend automatic programmable • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system f ...

grinding diameter: 200 mm grinding length: 340 mm centre height: 100 mm Control: CNC : 25 kVA voltage: 110 / 220 / 3x165 / 3x380 VAC control voltage: 24 VDC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

volume capacity: 1000 (1400) m³ / h accessories and equipment:: KUA - 3 / H Welding fume class: W3 total power requirement: 1,1 kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bread slicer Schickart TS / 30 plus stainless steel â Product description âœ" Manufacturer: Schickart âœ" Type: TS / 30 plus âœ" Condition: used, functional, baker's condition âœ" Material: stainless steel âœ" On castors, mobile âœ" Power supply: 400 Volt / 0.75 kW Details see pictures

Oil Spray Sprayer Manufacturer : ZELA Techniek Type : Plug & Spray 230 V Details see picture

Lifting kneader Diosna D 240 Plus Description Lifting kneader Diosna D 240 Plus with fixed boiler Manufacturer: Diosna Dierks &, Söhne GmbH Type: D 240 Plus Condition: Machine is revised and repainted With stainless steel boiler Kettle for max. 240 kg dough, or for max. 150 kg flour With 2 speeds, slow and fast With flour dust cover Mobile on castors 380 Volt

Lifting kneading machine Diosna S 120 Plus Description A used lifting kneading machine Diosna S 120 Plus Manufacturer: Diosna Dierks &, Söhne GmbH Type: S 120 Plus Condition: Machine is revised and repainted Lifting kneader Diosna S 120For max. 120 kg dough With 1 automatic timer Machine is revised and repainted With 2 gears, slow and fast With stainless steel kettle With flour dust cover Mobile on castors with brake

Lifting kneader Diosna D 200 Plus Description Lifting kneader Diosna D 200 Plus with fixed boiler Manufacturer: Diosna Dierks &, Söhne GmbH Type: D 200 Plus Condition: revised and repainted With stainless steel kettle Kettle for max. 200 kg dough or for max. 125 kg flour 2 speeds slow and fast With flour dust cover Mobile on casters Machine completely repainted With stainless steel control box With 1 timer NEW Many parts renewed Boiler polished 380 Volt 

600 watts, grinds 200 grams of wheat per minute at a coarser setting several times the amountHopper capacity: 1200 g (wheat)Grinder: Corundum/ceramic infinitely adjustableGrinding fineness

volume capacity: - m³ / h total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bacher 2045 Registerpunching Rigister punching width: 425mm Max plate width: 800mm

Size: 320 x 480 mm Equipments: Quality control: Semko ASIR III Feeder: Number of feeder: 9 x 370 cover feeder 1x 1529 Card adhesive: 1x 423 AMRYS - Automatic Make Ready System Stitching unit: Typ: Prima Plus Amrys 390 2x stitching heads AMRYS - Automatic Make Ready System Delivery: Typ: Rapido 7525 year: 2001 serial number: MMZO 490 194 Display direction: left Technical data: Format min: 90 x 105 mm Format max: 320 x 480 mm Maximum mechanical speed: 14,000 cycles/hour. Three-knife Typ: Mueller Martini 449 AMRYS - Automatic Make Ready System

Plockmatic 60 binderpro year: 2000 by estimation up to 20 sheets stitching + folding delivery tray

bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer diameter range 14-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm

Working lenght 2540 mm Material thickness max (400 N/mm²) 2.5 mm Upper beam upstroke max 280 mm Gauging system (rectangular) 6-1550 mm Gauging system (T-shape) 6-3050 mm

Used Handtmann twisting and unscrewing line type PVLH 228 Plus. Line for sausages in natural intestines, collagen and artificial casings. • PLUS NEWS AND OPTIONS: Natural bowel pusher, minimal setup time, easy operation and much more... • STEP-BY-STEP PROCESS: portioning – twisting – twisting with butterflies – Equal portion length – hanging • TOP QUALITY PRODUCT thanks to gentle twisting with butterflies and a twisting unit • LARGE VARIETY OF PRODUCTS thanks to a wide range of applications and calibers and different stations butterflies spinning • FLEXIBILITY due to a variety of suspension module options: grouping, number of loops and distances between hooks, empty or full portions • HIGH PERFORMANCE thanks to rotating twin-funnel head • COST-EFFECTIVE by changing the cover in less than 2 seconds • SIGNIFICANT COST REDUCTION due to the highest w ...

Spur gear chain hoist, spur gear chain hoist, hand chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Load capacity: 1500 kg -Travel distance: 4.8 m -Chain: with ring eyelet, without hook -Dimension: 260/300/H500 mm -Weight: 51 kg

Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor, overvoltage protection switch, protective plug -Manufacturer: Phoenix Contact, surge protection plug Ovp -Type: PLT-SEC-T3-24-P -Number: 3 pieces available -Price: per piece -Dimensions: 60/17/H45 mm -Weight: 0.1 kg

Load stand, swivel stand, lifting stand, shackle, load jack, lashing eye, lashing ring, anchor point, load stand thread -Manufacturer: RUD, Threaded load block with folding, rotating load arm -Type: VLBG 4.0 t M 24 -Base plate: 160/150/H45 mm steel -Holes: Ø 17 mm -Number: 5x load stands available -Price: per piece -Weight: 9 kg/pc.

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, filter dryer housing -Manufacturer: Alco, filter drier housing unused in original packaging -Type: ADKS-PLUS 969-T/PCN 883556 -Max. Operating pressure: 34.5 bar -Connection: 1-1/8 -Dimension package: 480/210/H160 mm -Weight: 5.1 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, filter dryer housing -Manufacturer: Alco, filter drier housing unused in original packaging -Type: ADKS-PLUS 969-T/PCN 883556 -Max. Operating pressure: 34.5 bar -Connection: 1-1/8 -Dimension package: 330/200/H160 mm -Weight: 4.1 kg

Electric winch, cable winch, lifting winch, construction winch -Tensile force 1 layer: 365 kg -Tensile force 2nd layer: 332.5 kg -Tensile force 3rd layer: 300 kg -Rope speed 1 layer: 10 m/min -Rope speed 2nd layer: 11.25 m/min -Rope speed 3rd layer: 12.5 m/min -Wire rope: 10 mm -Max. rope length: 43 m -Power of geared motor: 1.4 kW at 1395 rpm -Features: electrically driven, with limit switch, without control unit -Dimensions: 900/650/H440 mm -Weight: 137 kg

Electric cable winch, cable winch, hoist winch, construction winch, electric cable hoist, cable hoist -Tension 1 layer: 2000 kg -rope speed 1 layer: 10 m/min - Wire rope: 10 mm -Cable length: 65 m per layer -electrically powered -without control -Number: 1x winches available -Dimensions: 1850/640/H650 mm -Own weight: 616 kg

Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: Planeta Coswig, broach push broach -Type: 16D11x2.7 34-120inSt 34-165inGG - Width: 16mm -Number: 1x available -Total dimensions: 1250/16/H30 mm -Weight: 4.2kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: Plan, industrial trailer platform truck -Platform: 2300/1190/H450 mm -Load capacity: 2920 kg -Total dimensions: 3820/1200/H450 mm -Weight: 360kg

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Manufacturer: Platten, scissor lift table type 6.0 T/F/A -Load capacity: 6000 kg -Platform: approx. 1740 x 1280 mm -Dimension when retracted: Height 975 mm -Extended dimension: Height 1390 mm -Hydraulic unit: Kunz/Elmot 1.5 kW / 180 bar -Transport dimensions: 1740/1280/H1985 mm -Empty weight: 1270 kg

Servo motor, electric motor, DC motor, servo geared motor -Manufacturer: Dunkermotoren, servo geared motor -Type: BG 44X25SI -Voltage: 24 V -Speed: 2860 rpm -Gearbox: PLG 52 i = 8:1 -Shaft: Ø 12 x 22 mm -Number: 7x geared motors available -Price: per piece -Dimensions: 172/58/H52 mm -Weight: 1.1 kg/pc.

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 11,000/3000/H1070 mm -Load capacity: 100 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel Size: 646/200-480 -Total dimensions: 12,300/3000/H1070 mm -Weight: 12200kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Platform: 11,000/3,000/H1,100 mm -Load capacity: 100 tons -Steering: possible on both sides -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Number of wheels: 32 pieces -Wheel size: 646/200-480 -Overall dimensions: 12,300/3,000/H1,100 mm -Weight: 12960 kg -Handover: in its current condition as inspected -Note: Check the condition of the wheels

Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: Beckhoff Neuigart, servo geared motor with brake -Motor: Beckhoff type: AM8022-0D11-0000 -Voltage: 400 V -Power: 0.59 kW -Speed: 8000 rpm -Transmission: Neugart type PLE080-040-SSSA3AE-Z9 -Shaft: Ø 20 x 35 mm -Protection class: IP54 -Brake: 11 W -Technical data: see photos, nameplate -Dimensions: 320/80/H100 mm -Weight: 4.2 kg

Machine light, machine lamp, work area light, recessed light, LED recessed light, test light, panel light, ceiling recessed light -Manufacturer: Planistar, recessed light with LED 24V / 19W -Type: 35-Sled-3-BD-19w-O-disher -Connection: WAGO 5-pin connector -Number: 2 lights available -Price: per piece -Dimensions: 415/60/H30 mm -Weight: 0.6 kg/pc.

Servo motor, electric motor, DC motor, servo geared motor -Manufacturer: Dunkermotoren, servomotor with gearbox from lowering unit for ultrasonic welding machines -Type: GR 42x40 88842 -Voltage: 24 V -Speed: 3100 rpm -Gearbox: RE30-2.500 PLG42S i = 25:1 -Shaft: Ø 8 x 23 mm -Number: 5x geared motors available -Price: per piece -Dimensions: 185/42/H54 mm -Weight: 0.9 kg/pc.

Jack, support jack, lifting stand, bottle jack, mechanical lifting stand, axle jack, aluminum jack, hydraulic lifting stand -Manufacturer: Tangye, Aluminum jack, hydraulic lifting jack 6.5 ton -Type: Hydramite plus -Stroke travel: 76 mm -Shaft: Ø 30 mm -Quantity: 1x lifting jack available -Dimensions: 240/100/H135 mm -Weight: 3.9 kg/pc.

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with single-axle turntable steering -Platform: 6005/2000/H710 mm -Load capacity: 16 t -Tires: Solideal 425/150-305 solid rubber dual tires -Overall dimensions: 7795/2000/H710 mm -Total transport dimensions: 6615/2000/H710 mm -Weight: 1850 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with single-axle turntable steering -Platform: 7015/2000/H730 mm -Load capacity: 16 t -Tires: Solid rubber dual tires, see photos -Overall dimensions: 8675/2000/H730 mm -Transport dimensions: 7015/2000/H730 mm -Weight: 1940 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with single-axle turntable steering -Platform: 7000/2000/H730 mm -Load capacity: 15 t -Tires: Solid rubber dual tires 425/150-305 see photos -Overall dimensions: 8665/2000/H730 mm -Transport dimensions: 7000/2000/H730 mm -Weight: 1940 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with 1-axle turntable steering -Platform: 6520/2500/H755 mm -Load capacity: 20 t -Tires: Solid rubber dual tires, 8 pieces, 405/130-305, see photos -Overall dimensions: 8020/2500/H755 mm -Transport dimensions: 6520/2500/H755 mm -Weight: 2640 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with 1-axle turntable steering -Platform: 7000/1500/H735 mm -Load capacity: 15 t -Tires: Solid rubber dual tires, 4 pieces, 425/150-305, see photos -Overall dimensions: 8570/1500/H735 mm -Transport dimensions: 7000/1500/H735 mm -Weight: 1840 kg

Railcar, platform wagon, heavy-duty transport wagon, transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon, trailer -Manufacturer: Plan, railcar with 48-volt drive and battery -Type: EGB 50 -Platform: 4640 x 2000 mm -Load capacity: 50,000 kg -Drive: with 48-volt electric geared motor -Track width: mm -Wheel arch width: mm -Dimensions: 2000/4640/H770 mm -Empty weight: 4140 kg

Margarine pilot plant with 1x high pressure pump, 3x crystalizer scrap surface heat exchangers (SSHE), 1x pin worker (1 - 2 and 3 liter), 1x phase inverter, 1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour., - High Pressure Pump, High Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S, type Labo Pump 2-22-4 , serial number 12.211, year 1990, product pressure max 80 bar, temperature max 100 °C, capacity max 200 kg/h, motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC., - Scraped Surface Heat Exchanger 01, Cooler., Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity, pumpable food like margarine. Gerstenberg & Agger A/S, type Perfector Lab 1x57, serial number 12910, year 1993, dut ...

Lifting mixer DIOSNA, type: S120 Plus -In very good condition- - for 120 kg rye dough and 90 kg wheat dough - for 75 kg rye flour and 58 kg wheat flour - The "Plus" kneader runs faster than a normal lifting kneader - New two-step switch, no footswitch - More powerful "plus engine" - 2 speeds - Plastic flour dust cover - Machine can be driven on wheels - With rotary wheel to lock or release the wheel brake - Condition: technically very good, everything checked - The machine runs very smoothly, we can send a video - Ready for immediate use The machine is in very good condition and is ready for immediate use. Visits and test runs are possible by arrangement.

ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of pressure (Ton), speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece., The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material., Power (Ton): 30, Number of rollers: 2, PLC: YES

Air table 2 side tables 2 knives Photo cells Program

volume capacity: - m³ / h total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 406,4 mm gear width: 66 mm max. module: ca. 12,5 min. module: Control: Zyklengesteuert total power requirement: 21 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 3,3 x 2,5 m The GLEASON 641 G-PLETE bevel gear generating machine is a proven and robust solution for the production of spiral bevel gears, hypoid gears, and Zerol bevel gears usingthe well-established Gleason generating method. Designed for reliable and repeatable machining processes, this machine is ideally suited for small to medium batch production in industrial gear manufacturing. The 641 supports both roughing and finishing operations in a single setup (completing process), ensuring consistent gear quality while reducing handling time. Its mechanical generating system with variable roll ratio and plunge feedmechanism allows precise control of the tooth geometry, making it a depend ...

Size: 380 mm Equipments: cold glue, Exhaust, Paper mill max.lenght 380mm; max.thikness 40mm; max.hight 350mm; with mill and vacuum device

The 2012 Prima Power Platino 1530 is a professional-grade CNC laser cutting machine designed for high-precision sheet metal fabrication. Manufactured by the Italian company Prima Industrie (now Prima Power), the "1530" designation refers to its working area of 1,500 mm x 3,000 mm (roughly 5´ x 10´). Find more here - / Contact us at -