pipes used for sale

Butt welding machine PROSVAR S 315 PLUS with hydraulic drive. Serves for reliable connection of pipes made of polyethylene, polypropylene, PVDF and other polymer materials with a diameter of 40 to 315 mm

Overview The brewhouse, including fermentation and storage tanks and a KEG washer, was built in 2013 by the Austrian manufacturer Flecks. The whole equipment is in a very good condition and can be visited. Equipment Mash and brew kettle incl. whirlpool function, agitator, stainless: 1.000 L net Lauter tun, stainless: 1000 L net Calandria system (outdoor cooker), electrical heating, stainless. Integration of existing gas, heating + electrical: 72 kW Vapour-condensation system Whirlpool- system Mash and wort pump: 2,2 kW Hot water tank with electrical heating, stainless: 1000 L, 9 kW Wortcooler GEA 2-stages pT 100, electron. Thermometers Incl. all pipes, fittings, valves in stainless. Full automation upgrade: electrical switch board for full automatic process control switches, fuses: 100 kW Main connection 400 V Emergency switch PC-databus and modem Visualisations and automation software  ...

Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.

Pipe clamping system, clamps for butt welding device, butt welding device, mirror welding device, pipe welding device, assembly device for pipes -Recording from: 100-400 mm -Double clamping device: for pipe mounting -Dimensions: 1000/450/H260 mm -Weight: 22 kg

Pipe clamping system, clamps for butt welding device, butt welding device, mirror welding device, pipe welding device, assembly device for pipes -Sockets diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg

Pipe clamping system, clamps for butt welding device, butt welding device, mirror welding device, pipe welding device, assembly device for pipes -Recording from: 110-400 mm -Angle: 22.5 °/45 °/90 °/180 ° degrees -Double clamping device: for pipe mounting -Transport box -Dimensions: 830/290/H260 mm -Weight: 50 kg

Pipe saber saw, pipe jigsaw, beam jigsaw, saber saw, foxtail -Nominal consumption: 750 W -Stroke length: 60 mm -Max. Material thickness -Pipes up to: max. Ø 300 mm -div. Saw blades -Weight: 5 kg

Products: chrome-nickel steel pipes, internal pipe diameter: 1-40mm, cleaning process: immersion degreasing, steam degreasing, drying, output: 1-2 batches/h, degreasing cycle: approx. 45min, max. batch weight: 500kg, connected load: 85kW, with extensive documentation, hardware, current software backup and spare parts, including Distillation Unit Hösel EMO Devac 100, weight: 1t, has been serviced regularly.

Max. coil diameter: 2000mm, max. coil width: 1500mm, max. coil weight: 5t, max. tensile force: 550kg, winding speed: 0-20m/min, connected load: 4kW, with pressure roller system and documentation, suitable for the production of stainless steel pipes, an inspection is possible.

Connected load: 3.8kW, with pipes, two containers and suction funnel, without documentation.

Length: 9401mm, width: 2091mm, height: 5668mm, weight: 8.816t, with pipes and documentation, the dust collector was not used much.

Steel products, flat steel, round steel, bar steel, tubes, profile tubes, square tubes, rectangular tubes, sheets, shaped steel, wide flange beams, narrow flange beams, plates, structural steel, rolled steel, drawn steel, I-beams -For our customers in the area, we offer material cut-to-size and contract manufacturing and a large selection of materials in stock -Sheets, pipes, profiles, bars and sections made of steel, stainless steel and non-ferrous metals such as aluminum, brass and gunmetal

Double nipples, steel pipes, seamless steel pipe -Steel tube: thread on both sides -Pipe thread: Outside 4 inches Ø 112 mm -Number: 5 pieces -Price: complete -Dimension: Ø 114 x 300 mm -Weight: 3 kg/piece

Expanding pliers, expander set, expanding pliers, socket pliers -for pipes: 15/18/22/28 mm -Dimensions: 430/230/H80 mm -Weight: 3.5 kg

Temperature controller, temperature sensor, setting for temperature -Type: QAE2121.015 -Passive sensors for recording the water temperature in pipes and containers. The sensors are used in ventilation and air conditioning systems for: -Regulation and limitation of the flow temperature -Limitation of the return temperature -Control of the hot water temperature -Immersion length 150 mm -protection class: IP42 -Weight: 0.2 kg

Temperature controller, temperature sensor, setting for temperature -Type: QAE2120.015 -Passive sensors for recording the water temperature in pipes and containers. The sensors are used in ventilation and air conditioning systems for: -Regulation and limitation of the flow temperature -Limitation of the return temperature -Control of the hot water temperature -Immersion length: 150 mm -Immersion temperature sensor with protective tube -Technical specifications: -hreaded nipple: G1/2A, PN10 -Degree of protection: IP 42 IP 54 with cable gland -Measuring element: Ni 1000 Ohm -Application range: -30...+130 °C -Connection: 2-wire -Weight: 0.3 kg

Temperature controller, temperature sensor, setting for temperature -Type: QAE2120.010 -Passive sensors for recording the water temperature in pipes and containers. The sensors are used in ventilation and air conditioning systems for: -Regulation and limitation of the flow temperature -Limitation of the return temperature -Control of the hot water temperature -Immersion temperature sensor with protective tube Technical specifications: -Immersion length 100 mm -Protection class: IP42 -Threaded nipple: PN 10, G 1/2A -Measuring element: Ni 1000 Ohm -Application range: -30...+130 °C -Connection: 2-wire -Weight: 0.3 kg

Sputter target, tube, pipe -Tube dimensions: Outside: Ø 152 mm Inside: Ø 125 mm Total length: 3249 mm -Number: 2x pipes available -Price: Complete -Incl. Transport box -Dimensions box: 3600/570/H585 mm -Weight: 306 kg

Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm -Weight: 238 kg

Aluminum circular saw, miter saw, glass bead saw, aluminum saw, underfloor aluminum miter saw machine -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 350 mm -Drive: kW -Speed: 900/1700 rpm -Dimensions: 900/520/H1280 mm -Weight: 150 kg

Container turning device, welding turning device, roller block, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling flame straightening -Drainage channel and water pump -Roll diameter: Ø 180 mm -Drive: PIV gearbox -electric: adjustable -Load capacity: 1 to -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Hand switch -Counter bearing: laterally adjustable -Dimensions drive: 3600/820/H850 mm -Dimensions counter bearing: 2950/820/H850 mm -Own weight: 1300 kg

Container turning device, welding turning device, roller block, rotators, pipe straightening system, shaft straightening system -Pipe straightening system for: Flame straightening steel pipes or shafts with flame and water cooling -Drainage channel and water pump -2x: counter holder prism -Counter bearing: adjustable -Dimensions: 4000/870/H810 mm -Own weight: 500 kg

BA150E D285, This 6 inch diesel-driven waste water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/h and pressure up to 30 mwk, 80 mm bore and wear plate with cutting grooves., , Press x Suction (inches) 6 x 6, max. capacity (m3/hour) 470, max. head (mwc) 30, Dirt passage (mm) 80, Vacuum system (m3/hr) MP50 (50 m3/hr), Diesel engine Perkins, max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Sound level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1600, , Throughput capacity: 470 m3/h, Max dirt passage: 80 mm, Motor brand: Perkins, Max. head: 37 MWK, Weight: 2150 kg, , = More information =, , Year of manufacture: 2011, Applicable  ...

BA150E D285, This 6 inch diesel-driven waste water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/h and pressure up to 30 mwk, 80 mm bore and wear plate with cutting grooves., , Press x Suction (inches) 6 x 6, max. capacity (m3/hour) 470, max. head (mwc) 30, Dirt passage (mm) 80, Vacuum system (m3/hr) MP50 (50 m3/hr), Diesel engine Perkins, max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Sound level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1600, , Throughput capacity: 470 m3/h, Max dirt passage: 80 mm, Motor brand: Perkins, Max. head: 37 MWK, Weight: 2150 kg, , = More information =, , Year of manufacture: 2011, Applicable  ...

This Impulse IP-175 AbuDhabi piston pump is designed for vertical and horizontal dewatering. These positive displacement pumps are self-priming and extremely suitable for unlimited pumping of a mixture of water and air. Moreover, this pump can run dry without any worries, without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , 82 m3 per hour, MAX: 22 MWK, , Several pieces in stock, , Throughput capacity: 82 m3/h, Motor brand: Hatz, Max. head: 22 MWK, Weight: 1950 kg, , = More information =, , Year of manufacture: 2023, Applicable material: Water, Empty weight: 1.950 kg, Connector size: 4 Cardan, Cargo space capacity: 1.585 l, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more informat ...

Socolest DAS 200 double shaft multi rip saw infeed and outfeed table - Italian production - centering feeding table - Dump receiving table - upper pulling rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - motor power 2 x 55 kW - track width 630 mm - diameter of discs max 350 mm - feed speed 40 m/min - Hydraulic height adjustment of the shafts - Hydraulic cutting height adjustment - hydraulic feed - Four upper pulling rollers - Four rows of anti-kickback latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side centring clamp - diameter of stub pipes 2 x 250 mm - minimum workpiece length 720 mm -laser - belt feeding table 5700 mm - table width 600 mm - pneumatic pressure roller - table speed adjustable on the inverter - take-up table 9200 mm - roll width 800 mm - roll diameter 135 mm - Four d ...

A second-hand line for milling and pressing fruit and vegetable pulp. The line consists of: - BELT PRESS TYPE B FRU 800 HK WITH CONTROL PROBE IN FEED HOPPER FLOTTWEG 2008 - FEED HOPPER MEGA 2012 - ROTARY SIEVE WITH EXTERNAL INFLUX DIA. DRUM 355MM LENGTH DRUM LENGTH 1600 MMDRUM 1600 MM MEGA (FLOTTWEG) 2012/14 - METERING RUNG ELEVATOR - BRUSH POLISHER MEGA 2008 - INSPECTION ROLLER CONVEYOR MEGA 2008 - FLOTTWEG SCREW CONVEYOR 2017 - PULP CONTAINER 400L - CENTRIFUGAL PUMP FOR PULP - 500L FLUSHING WATER TANK - CENTRIFUGAL PRESSURE PUMP - PIPES, FITTINGS, ELECTRICAL CONTROL CABINET FLOTTWEG 2008 - JUICE COOLING SYSTEM STM 2018 - TUBE BEAKER SPOMASZ 2018

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2008. The 14 metre long and 4 metre wide stable frame of the machine allows for efficient cutting of large-size details while maintaining excellent precision and quality of processing. In order to ensure a high level of comfort and safety, the work table is equipped with ventilation and an extraction system for exhaust fumes into tanks and feed bags, which effectively eliminates the dust generated during cutting. The JANTAR 2 plasma cutting machine can be expanded with other elements, such as devices for cutting and processing steel pipes or welding thin metal sheets using the piezoelectric method, giving the possibility of adapting the machine to the individual needs of a production facility. In addition, the machine comes with extensive equipment, including an easy-to-use ECKERT CNC controller and FastCAM software with a  ...

TORNOS MICRO-8 CNC turning centre built in 2008 in Switzerland is distinguished by its extensive machining capabilities, sturdy design made of the highest quality cast iron and compact size. The machine designed for ultra-precise machining of workpieces with a maximum diameter of 10 mm is equipped with two reliable spindles to maximise production efficiency in any production facility, even during the most demanding challenges. The main spindle and counter spindle with integrated thermal control, retractable collet and ceramic ball bearing run on guides with increased rigidity. Both spindles are powered by reliable FANUC motors, ensuring that the necessary power is supplied for the versatile use of all the cutting tools located in the 20-position linear magazine. The arrangement of the tools in the magazine has been made in such a way as to allow simultaneous machining on the main spin ...

DECO 2000-26 year 2001 IEMCA BOSS 445 bar feeder + SERMETO chip conveyor + parts conveyor belt. 40269 Working hours S1 spindle capacity 32 mm (main headstock spindle) S4 spindle capacity 32 mm (against spindle) main operation: 2 combs capacity 5 tools each S2 motorization at reed 2 with mounting of 4 rotary tools possible A device at the end capacity 4 tools S3 motorization at the end device with mounting of 4 rotary tools possible Counter operation: 4 longitudinal fixed or rotating tools 3 transverse fixed or rotating tools S5 transverse and longitudinal engines. Pneumatic part ejector + jaws for part recovery (basket or mounted jaws) Many rotating and fixed tool holders supplied Many clamps and barrel provided Complete overhaul carried out by the machine manufacturer in December 2022 During this overhaul, the following elements were re ...

76 x 114 cm Feeder Laminator Cutter Bridge Collater Year 2016 (Achillas) Electrical Cabinet 2 x Heaters Vacum Pumps, Fans Covers, Rollers, Pipes Laminator Fan, Manuals, Connecting Tools Pressure Roll It is very good condition Available immediately

Niles brand german mali borverk bench x : 1600 mm y : 1600 mm z : 1800 mm Turntable works flawlessly. gear sets bronze nut all maintenance is done. It has an opening mirror. counter bed is available. The opposite bed was sandblasted and painted for cleaning. it is well maintained. There is no non-working place in the electrical unit. the machine is about 20 tons 11 tons of material was processed on the table before. By producing the apparatus, it can be processed with a chuck that opens pipes up to q 1800 mm diameter. gasket surface can be opened to flanges.

The column saw is designed to cut metals from aluminum and its castings, through non-ferrous metals, to high-quality metals such as stainless steel. The saw has a stable structure and reliable technology for automatic material feeding and cutting, which only takes place at an angle of 90°. The saw is also equipped with a cooling system, which is responsible for cooling, lubrication and protection against corrosion of tools and cut elements. The main materials cut on a frame saw are profiles, shafts, pipes, rods, angles, C-sections, T-sections and other shapes. Producer: KASTO Model HBA-360 AU Year of production 1995 Automatic operation type Tape cutting tool 5334x38x1.3 mm Max. dimensions of the cut material 360 x 360 mm Max. diameter of cut material 360 mm Angle cutting missing Arm feed speed 20 - 130 m/min Hydraulic vice pressing Engine power 7.5 kW Producer: KASTO Max. ...

The column saw is designed to cut metals from aluminum and its castings, through non-ferrous metals, to high-quality metals such as stainless steel. The saw has a stable structure and reliable technology for automatic material feeding and cutting, which only takes place at an angle of 90°. The saw is also equipped with a cooling system, which is responsible for cooling, lubrication and protection against corrosion of tools and cut elements. The main materials cut on a frame saw are profiles, shafts, pipes, rods, angles, C-sections, T-sections and other shapes. Producer: KASTO Model HBA-420 Cutting area approximately 420 mm Square cutting surface 420x420 mm Material feeding with automatic 600 mm Multi-material feeding 9999 mm Cutting speed continuously 20-130 m/min Total drive power 8 kW The driving power of the saw engine is 5.5 kW Stepless regulation of pressure reduction ...

New OSTAS SMR-S 1270x190 mm sheet rolling mill The SMR-S models are one of the most popular metalworking solutions for light to medium duty applications; this is due to their robust body and the driving of the upper and lower rollers by electric motors. STANDARD EQUIPMENT and TECHNICAL SPECIFICATION • Precisely matched shafts made of high-grade steel SAE 1050 (CK-45) • Spiral reducer with chain and belt drive and wheels gears driving the upper and lower rollers • Machine body made of ST-52 steel • Rear roller motor • Manual top roll opening • Roller for conical bending • Top roller support system • Centralized lubrication system • Mobile electric control panel • Compliant with CE standards • User manual SPECIAL EQUIPMENT • Stepless speed regulation • Digital display for rear roller • Rear roller dr ...

Ajan PP 260 A CNC Plasma and Oxygen Cutting Machine 260 Amper Cutting length : 1500 mm X 6000 mm 4 Kw Ducting fan : 5.5 Kw and 6000 M3/H, year : 2012 Generator PP260A 52KW,year : 2012 Pipes have been changed recently All maintenance has been recently serviced by Ajan service

Crippa cnc pipe bending machine All hydraulic elements have been revised It bends up to 323mm pipes. It is fast and sensitive. It has Turkish software and touch screen panel. There are 5 types of bending dies and mandrels. Rotation and advancement are servos. Our machine has no problems and can make very serial bending.

Specifications: Production line for EPE foam sheets EPE foam tube (optional; ask for the cost) Working hours 1200h, Like new, Include two changeable line for tube & sheet to one extruder L/D54, Include all auxiliaries (special pumps, spare parts, pipes e.t.c), To run immediately, Capacity 80 kg foam per hour Production: 500.000 m2 foam sheet per 20 days & 500.000 m foam tube 28 mm per 20 days Full equipment & complete without any other needs or auxiliaries Other Details: Guarantee: Without guarantee Current condition: Dismantled. Cant be seen in running condition Availability: Immediate Voltage: 90 Kw

Line for plastic coating of metal profiles. It has HEADS FOR PLASTICING closed steel profiles with mouthpieces of dimensions 40mm x 60mm and 60mm x 60mm. Mouthpieces can be of any shape for D100mm pipes and 80x100mm profiles But you can cover any profiles. Capacity 45 kg of plastic per hour. Feed rate depends on the profiles, max 45 kg/h. year of construction 2015. Unused, still packed. Steel pipe PVC Coating production line 1 SJ55/25 single screw extruder 2 Coating Mould 3 Steel straighter pipe feeder 4 Water tank 5 Haul-off (2 claws) 6 stacker SJ55/25 single screw extruder Output capacity: max. 45kg/h Screw : Diameter of screw: Ф55mm L/D: 25/1 Material of screw: 38CrMoAl Surface treatment: Nitride processing, thickness: 0.6 ~ 0,8mm, Polishing Max. rotating speed: 50rpm Barrel: Material of Barrel: 38CrMoAlA Inner processing: Nitride with thickness: 0.6 ~ ...

This listing includes the following components for Fiber filling machine/pillow filling machine: 1. Foam Shredder Model:FX- 001 Capacity: 40-50 kg/h Voltage : 380v/50hz/3phase Power: 4kw Size:681×596× 1178mm Weight: 80kg 2. Fan with T-joint- Transfer your raw material to the Mixer machine 3. Cotton filling machine: Model: FX-1500 Voltage :380v Power : 1.5kw ＋2.2kw Size:150011002050mm Weight:330KG Cotton outlet number :2 Air pressure:0.7-0.8MP 4. Filling Pipes- 12,16,19,28,38,53,61 mm 5. Filling machine - Filling your raw material into your product Filling machine is produced in China and shipped in Europe, Bulgaria, all duty fees paid for European Union. Machine is installed on site for testing the work of it. Worldwide shipping may vary depending on Country. Please feel free to ask any questions1. Brief introduction of the cotton filling  ...

The sale is intended for the entire brewery in the body, only and exclusively in the body. Steamed room from two 15hl semi automatic vats Ecobrewtech Touchscreen system control panel with recipe programming Very high precision electronic fiscal meter Cold (glycol) and hot (steam) storage tank of 30hl each. Double stage heat exchanger (cold water and direct glycol) 158hl cellar (2 45hl fermenters, 1 24hl fermenter, 1 29hl fermenter and 1 15hl fermenter) Steam generator year 2020 of 150kg / hour with pressure reducer (low pressure work but also high if necessary) Softener Chiller year 2020 from 23kw Manual 4-jaw isobaric bottling machine, July 2021 Cold room about 30sqm year 2020 Wheeled pump for washing year 2020 Product transfer tubes 2020 Skid 2 pumps for glycol and glycol tank 500lt 2 stainless steel control panels for fermenters control (total 10 slots, 7 active therm ...

Use: The machine is made of stainless steel, it is suitable for use in food, cosmetic and chemical operations. (Not suitable for explosive atmosphere) The machine is suitable for filling liquids with low and high viscosity. E.g: - Water, sanitizing agents, paints, creams, dairy products, sauces and flavorings, spreads, salads, delicate meat mixes, etc. Function description: The machine doses the product on the principle of volumetric dosing. The machine can be equipped with a weighing platform for mass dosing. The tank is filled with the dosed product, it can be filled manually or with the help of a refilling pump, for which a flange is prepared in the lid (a level sensor for automatic refilling can also be connected). The dosing unit takes the product from the tank and pumps it through the pipe to the nozzle. The nozzle will be manufactured according to the specifications of the ...

Dishwasher / Quaker No. 1 (complete) - as in the picture: Manufacturer: TOPLINE Catalog number: E/473/O/2.12 Year of purchase: 2017 Quaker No. 2 (no bowl and rods) - to be completed or for spare parts Manufacturer: TOPLINE Catalog number: E/346/O/2.11 Year of purchase: 2012 The dishwasher performs a special washing process involving the action of hot steam from distilled water or nitric acid. Particularly useful in the laboratory using AAS, ICP and ICP-MS techniques for trace analysis. It allows you to wash glass, ceramic, Teflon (PTFE/PFA), quartz and borosilicate glass dishes. The heating element is a heater with a power of 1800 W. There is a tank on it, which is filled with water or nitric acid. The evaporating liquid is sent in the form of steam to the washed dishes through glass pipes. This steam can be reused after it has been liquefied. The entire device should be ...

Automatic Machine For Extrusion 90 ° T Fittings For Flue Pipes Complete With 14 Molds The diameters supplied are: 80/100/120/130/140/150/160/180/200/220/230/250/300/350/400 The machine is perfect like new

130 pipe bending machine There are 8 types of molds for pipes and profiles, cnc 3 axis, 6 meters pipe processing capacity, 2008 model, self-winding brand, very solid and alive machine [130 mm diameter 5 mm thickness Can bend 60x60 10 mm profile can be bent easily

This BBA PT150 with strong 7.5 kW electric motor can be used well on large construction projects, where the power supply is often well regulated. Then this PT150 with electric motor is a good choice., Environmentally friendly, not much maintenance, so an investment that pays for itself quickly., This PT150 is electrically powered and built into a robust galvanized stacking frame., , Max. capacity :90 (m3/hour), Max. head :20 (mwc), Max. suction height : 9.6 (meter), , Throughput capacity: 90 m3/h, Max. head: 20 MWK, Max dirt passag: 1485 rpm, , = More information =, , Year of manufacture: 2016, Applicable material: Water, Empty weight: 1.500 kg, Connector size: 4, Cargo space capacity: 1.500 l, Technical condition: good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, ,  ...

combined fiber laser with a power of 3kw. In perfect condition, under WARRANTY. The machine is still in operation, information and experience will be passed on directly by the laser operator. ! Premium PRECITEC cutting head (top of Raytools) ! Additional IPG Source - the best source that prevents the beam from returning to the source. This extends the lifetime of the source several times. ! Tuned cutting parameters Two-table exchange system Work surface 3000 × 1500 mm W axis rotation angle n360 Maximum speed of the W axis 80 rpm Maximum movement speed 120m/min Max. 1.5G acceleration 4. rotary axis for cutting pipes with a diameter of 20-220 mm, steel 140/140 s maximum length 6000 mm.

This Eisele sound-dampened dirty water pump is a jack of all trades. , Whether it is sewage, slip, bentonite or sludge water or just surface water, this, Eisele BS 440 dirty water pump can do it all., , Max. flow: 80 m3/h, Max head: 15 MWK, Max. dirt passage: 20 mm, , If you are interested, please feel free to contact us, we will be happy to help you., , Throughput capacity: 80 m3/h, Max dirt passage: 20 mm, Motor brand: Hatz, Max. head: 15 MWK, Max dirt passag: 1800 rpm, Weight: 1150 kg, , = More information =, , Year of manufacture: 2017, Applicable material: Water, Empty weight: 1.150 kg, Connector size: 4, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer a ...

Key data: 265

Biogas Schnell module with Scania Engine availble for immediate delivery. Engine is in good condition and full maintenance contract carried out by Schnell . Make: Scania Schnell Model: 6R20.1B Power: 265kW Hour: 28,200h Year: 2018 Fuel: Biogas Scope of supply: Engine, alternator (Stamford), frame, control panel, radiators, exhaust system, active carbon filter, gas cooler, pipes, large set of gas and diesel filters. Price: €60,000

This Eisele sound-dampened dirty water pump is a jack of all trades. , Whether it is sewage, slip, bentonite or sludge water or just surface water, this, Eisele BS 440 dirty water pump can do it all., , Max. flow: 80 m3/h, Max head: 15 MWK, Max. dirt passage: 20 mm, , If you are interested, please feel free to contact us, we will be happy to help you., , Throughput capacity: 80 m3/h, Max dirt passage: 20 mm, Motor brand: Hatz, Max. head: 15 MWK, Max dirt passag: 1800 rpm, Weight: 1150 kg, , = More information =, , Year of manufacture: 2016, Applicable material: Water, Empty weight: 1.000 kg, Connector size: 4, Technical condition: good, Visual appearance: good, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses  ...