128,422 used machines on RESALE, but how to find them? Machine Search
turning diameter:500 mm turning length:1000 mm control:Siemens 840 D spindle:42 / 28 kW spindle turning speed - stepless:31 - 4000 1/min max. torque on the spindle:345 Nm c-axis:360000 x 0,001° feeds -stepless-:0 - 10000 mm/min rapid traverse:10000 mm/min turret stations / rotary tool stations:12/12 VDI 40 RPM of rotary tools:2000 1/min diameter of quill:90 mm quill stroke:80 mm tailstock quill taper ISO:SK 30 Tailstock Travel:600 mm Power rotary tools:3,5 kW :22,5 Nm Rotary tool holders:4 ax./ 4 rad. spindle passage:66 mm total power requirement:30 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:8x 3 x 4 m
turning diameter:356 mm turning length:705 mm control:MSX 850 MAPPS II swing dia.:755 mm standard turning diameter:275 mm travel -x axis:260 mm travel -y axis:100 (+-50) mm travel -z axis:795 mm rapid travel - longitudinal/face:30 / 30 m/min rapid traverse Y-axis:10 m/min Rapid travel B-axis (parts transfer subspindle):30 m/min Spindle 1 RPM:4000 1/min Spindle 1 Power:18,5/18,5/15 kW Spindle 1 max. bar diameter:80 mm Spindle 2 RPM:6000 1/min Spindle 2 power:11 / 7,5 kW turret stations / rotary tool stations:16 / 16 VDI 30 :5.5/5,5/3,7 kW speed of driven tools:6000 1/min total power requirement:39,2 kVA weight of the machine ca.:6,2 t dimensions of the machine ca.:3,1 x 2,0 x 2,2 m Spindle 1 Chuck:Kitagawa B 210 (250 mm) Spindle 2 Chuck:Kitagawa B 206 (160 mm) High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by MAPPS II Control.
We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts
max. workpiece diameter:29 mm min. workpiece diameter:26 mm workpiece length:66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. Workpiece: Piston pin Drawing number: WHT 000 718, WHT 000 718 A Workpiece dimensions (Ø, WxH): Ø26 x 66; Ø29 x 65 Length: 66 or 65 mm Material: 17Cr3 Quantity: xxx parts / year Cycle time: 5 sec. However, workpiece lengths up to 600mm are manageable. The machining diameter can be adjusted if the appropriate tools are available. The clamping station can currently only accommodate this product. However, this can be adapted by changing th ...
turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.
turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock version Chip conveyor, belt filter press, hydraulic unit, as well as infeed and outfeed chain conveyor EWAP, with 33 pallets. The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.
turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with automatic loading and unloading system, chip conveyor G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.
turning diameter:120 mm turning length:650 mm weight of the machine ca.:11 t dimensions of the machine ca.:5,032 x 3,048 x 2,445 m Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.
turning diameter:120 mm turning length:650 mm weight of the machine ca.:11 t dimensions of the machine ca.:5,032 x 3,048 x 2,445 m Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.
max. wheel diameter:300 mm max. number of teeth:999 max. module:5 total power requirement:10 kW weight of the machine ca.:1.800 Kos. dimensions of the machine ca.:1300 x 1450 x 2250 mm The Gear Tooth Deburring machine ? ZEM 300 for deburring of splines gear wheels and shafts The advantages at a glance - Vertical workpiece spindle - Chamferring, debburing and smoothing - Simultaneous Processing of 2 Gears - Dry Processing - Repeat accuracy when adjusting the tools - Simple integrated Pick up swing arm or linear loader - Crane hook machine Workspace Swing Diameter: 300 mm Process Diameter: 300 mm Workpiece Length: 450 mm Main Spindle Spindle Flange: Zylindrisch D=120 mm Front bearing spindle: 100 mm RPM max: 1500 U/min AC-Synchronmotor: 50 Nm Clamping cylinder : pneumatic Clamping force (5 bar): 10 kN Working axis swing arm for chamferring tool Feed force: 3 kN Ball screw drive: 25x5 P ...
turning diameter:33 mm turning length:330 mm control: 840 total power requirement:20 kW weight of the machine ca.:6 t dimensions of the machine ca.:3850,2000,2100 m 17 axes 3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axes Barfeeder Machine On-time 58,133 hours
spindle diameter:130 mm spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-travel:1000 mm w-axis:1075 mm table surface area:2000 x 1800 mm workpiece weight max.:8000 kg spindle turning speed range:4,5 x 900 U/min spindle taper: ISO:50 faceplate turning speed range:4,5 x 180 U/min faceplate diameter:785 mm rapid traverse::5000 mm/min total power requirement:40 kW weight of the machine ca.:35 t dimensions of the machine ca.:5,5 x 6,9 x 5,2 m Machine retrofit and overhould with TNC 360 Heidenhain in 2023 and stepless spindle speeds - table indexing 4 x 90° - facing head 785 mm - exhauster - various arbors and tooling
spindle diameter:150 mm x-travel:10000 mm y-travel:2500 mm bore spindle stroke:700 mm Speed of boring spindles:1,25 - 1250 U/min. ram stroke:700 mm dimension of the ram:340 x 340 mm mm spindle taper ISO:50 rapid traverse:5 m/min total power requirement:120 kW weight of the machine ca.:115 t dimensions of the machine ca.:15,1 x 10 x 6,4 m CNC control Siemens 840 Dsl completely modernized 2010 FIBRO CNC drilling work table 2500 x 2500 mm 50 to. workpiece weight Longitudinal travel 2500 mm Angular milling head 4 x 90° Universal angular milling head Panel area approx. 10000 x 5000 mm Chip conveyor and coolant device Aerostatic guides
bore capacity in steel (diameter):- mm throat:- mm bore stroke:- mm x-axis:1.800 mm y-axis:1.600 mm z-axis:1.250 mm w-axis:630 mm max. table load:5.000 kg table length:1.400 mm table width:1.600 mm spindle diameter:105 mm spindle turning speed range:3.300 U/min numbers of positions in the tool changer:40 internal coolant system feed:40 bar Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe Renishaw RMP60 Upgrades in 2024 and 2025 Retrofit of X and Z axis ball screws at producer ? KSK Kurim CZ New linear scales Heidenhain in X and Z axis including cabling retrofit of Z axis - new Biplast V lining on guideways, hand scraped Biplast lining on Z axis new TOS Varnsdorf parts for tool clamping and automatic tool changer arm Overhaul of X, Z and Y axis feed motors at authorized Siemens service (new bearings and sensor) New Siemens hand wheel
turning diameter:220 mm turning length:- mm control:- distance between milling spindels:800 mm spindle speed max.:12.000 U/min daylight:66 mm machine weight ab.:11 t total power requirement:90 kVA Fanuc control Two turrets Two spindles Spindle bore 66 mm on both spindles Two Y-axes Parts gripper Hainbuch chuck on both spindles Tailstock function Chip conveyor Tool eye Short bar loader Tool holder package
spindle diameter:100 mm x-travel:1250 mm y-travel:1100 mm z-travel:950 mm spindle turning speed range:2500 U/min Rotary-table:1100 x 1000 mm table surface area:1000 x 1100 mm tool clamping:69871 DIN spindle stroke:630 mm spindle taper:SK50 total power requirement:22/34 kW max. workpiece weight:3000 kg weight of the machine ca.:13000 kg
x-travel:3500 mm y-travel:2500 mm z-travel:1250 mm bore spindle speeds:2500 U/min table load:12 t dia. of rotary table:1800 x 2200 mm numbers of positions in the tool changer:60 Lifting operator platform External tool cooling Spindle clamping support
turning diameter:760 mm turning length:1.524 mm spindle speeds::3.300/12.000 MILL/3.300 spindle diameter:78/78 mm no. of tools in magazin:80 tool taper:Capto max. tool length:400 mm max. tool diameter:125/90 mm weight of the machine ca.:13,4 t Machine with Mazak Matrix CNC control Main and counter spindles Milling unit (milling spindle) Kitagawa QJ-312 dual-action chuck Pallet pool with robot IKZ Exhaust system not included
spindle diameter:150 mm x-travel:3.000 mm y-travel:2.000 mm spindle stroke:700 mm dimension of the ram:340 x 340 mm ram stroke:700 mm column travel:1.500 mm high speed spindle taper ISO:50 bore spindle turning speed range:3,2 - 1.600 U/min table surface area:2.000 x 2.500 mm max. table load:25.000 kg rapid traverse speed:5/10 m/min feed speeds:1 - 1.500 mm/min faceplate speeds from - to:3,2 - 140 U/min dimensions of the machine ca.:8,4 x 6,8 x 5,9 m weight of the machine ca.:57 t total power requirement:100 kW Full B-axis Aerostatic guides Coolant system with IKZ
bore capacity in steel (diameter):5 - 30 mm x-travel:450 mm y-travel:380 mm total power requirement:1,4 / 2,2 kW weight of the machine ca.:1.100 kg dimensions of the machine ca.:1.000 x 1.400 x 2.900 mm gear box:85 - 2.000 U/min spindle diameter:72 mm bore depth:700 mm throat:300 mm spindle taper MT:3 T-slots:3 x 16/25 mm table-size:700 x 300 mm spindle turning speed range:85/170/250/355/475/710/1000/2000 U/min motor speeds::705/1425 Year:ca. 1975
x-travel:1190 mm total power requirement:25 kW feeds::3 - 2000 mm/min weight of the machine ca.:4,3 t table-size:1600 x 400, 5 Spannbacken mm dimensions of the machine ca.:4000 x 3600 x 2200 mm speeds:45 - 1800 U/min y-travel:530 mm z-travel:540 mm tool taper:ISO 50 control cabinet:940 kg
x-travel:850 mm y-travel:280 mm z-travel:355 mm total power requirement:8 kW weight of the machine ca.:4 t dimensions of the machine ca.:2 x 2 x2.40 m revolutions per minute: 28-1.400 U/min table-size:1.200 x 370 mm surface area:1.060 x 260 mm spindle taper:SK 50
spindle diameter:180 mm x-travel:6.000 mm y-travel:2.900 mm total power requirement:95 kW weight of the machine ca.:130 mit Zubehör t z-travel:1.250 Ram mm w-axis:1000 Spindel mm ram stroke:1250 mm dimension of the ram:450 x 450 mm bore spindle stroke:1000 mm bore spindle turning speed range:920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table:3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter:Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross:Längs 1230 mm table load of rotary table max.:40 Tonnen clamping plate:3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped.
throat:580 mm tool adaptor:drm. 130 weight of the machine ca.:0,1 t dimensions of the machine ca.:0,4 x 0,4 x 0,58 m used spindle support bearing for spindle diameter 130 mm Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.
spindle diameter:150 mm x-travel:10000 mm y-travel:2500 mm bore spindle stroke:700 mm ram stroke:700 dimension of the ram:340 x 340 mm spindle taper ISO:50 Speed of boring spindles:1,25 - 1250 U/min. feed speeds infinitely variable:1 - 5000 mm/min rapid traverse:5 m/min total power requirement:120 kW weight of the machine ca.:115 t dimensions of the machine ca.:15,1 x 10 x 6,4 m with CNC SIEMENS 840 Dsl complete retrofit in 2010 FIBRO CNC rotary table 2500 x 2500 mm, 50 to. loading capacity, longitudinal movement 2500 mm, angular milling head 4 x 90° universal milling head floor plate area ca. 12000 x 6000 mm ( 72 m²) chip conveyor and coolant attachment aerostatic guideways
turning diameter:275 mm turning length:900 mm spindle passage:65 mm power capacity at 100 % load:25/20 kW spindle turning speed range:1 - 5000 U/min spindle diameter in front bearing:110 mm c-axis:1 - 500 U/min. number of workpiece supports:4 tool turret:1 x-axis:290 mm y-axis:165 mm z-axis:360 mm b-axis:360 ° rapid speed:18/30 m/min number of tools:2x2 + 2x2 number of driven tools:2x2 + 2x2 mm toolpiece turning speed range:8000 / 2000 U/min power capacity:25% ED 5,8 kW tool taper:TRAUB 60 tool turret:2/3/4 x-axis:170 mm z-axis:600/950 mm y-axis:+/- 60 mm rapid speed:18/15/30 m/min number of driven tools:10 mm toolpiece turning speed range:1 - 6000 U/min power capacity:25% ED 5,8 kW tool taper:DIN 69880 40 x 63 total power requirement:95 kW weight of the machine ca.:16 t dimensions of the machine ca.:10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and ...
spindle diameter:150 mm x-travel:3000 mm y-travel:2000 mm spindle stroke:700 mm dimension of the ram:340 x 340 mm ram stroke:700 column travel:1500 mm spindle taper ISO:50 bore spindle turning speed range:3,2 - 1600 U/min table surface area:2000 x 2500 mm max. table load:25000 kg rapid speed:5 / 10 m/min feed speeds:1 - 5000 mm/min total power requirement:100 kW weight of the machine ca.:57 t dimensions of the machine ca.:8,4 x 6,8 x 5,9 m with CNC SIEMENS 840 D full B-axis aerostatic guideways facing head ( 3,2 - 140 rpm ) angular milling head 1000 Nm coolant attahcmnet with internal cooling supply
spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-axis:1520 mm w-axis:1000 mm table surface area:2000 x 1800 mm workpiece weight:8 t spindle motor:18 kW spindle taper ISO:50 spindle turning speed range:4,5 - 900 U/min faceplate diameter:785 mm rapid traverse:5 m/min total power requirement:40 kW dimensions of the machine ca.:5,5 x 6,9 x 5,2 m weight of the machine ca.:35 t Machine was retrofitted in 2023 with HEIDENHAIN TNC 360 CNC control - inf. variable spindle spped - 4 x 90° table positioning - diverse toolholders - dDust exhauster
spindle diameter:120 mm x-travel:1250 mm y-travel:1250 mm z-travel:800 mm W-axis (spindle longitudinal):600 mm Speed of boring spindles:1- 2000 U/min. spindle taper ISO:50 table surface area:1000 x 1000 mm total power requirement:55 kW weight of the machine ca.:18 t with CNC HEIDENHAIN TNC 426 autom. toolchnager 40-pockets coolant attachment
spindle diameter:200 mm x-travel:10000 mm y-travel:4000 mm z-axis:1500 mm W-axis (spindle longitudinal):1000 mm bore spindle turning speed range:1 - 2000 U/min dimension of the ram:600 x 530 mm high speed spindle taper ISO:60/50 rapid motion - x-axis:8000 mm/min rapid motion - y-axis:8000 mm/min rapid traverse Z-axis:5 m/min total power requirement:120 kW weight of the machine ca.:135 t dimensions of the machine ca.:16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm chip conveyor and coolant attachment
turning diameter:445 mm turning length:2000 mm turning diameter over bed slide:660 spindle bore:65 mm spindle speeds::16 - 3150 U/min. rapid motion - x-axis:10 mm/min rapid traverse Z-axis:15 m/min total power requirement:34 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:6 x 2,5 x 2,2 m with CNC Control TX 8 D C-axis driven tooling 14 station turret head 3 jaw chuck dia. 315 mm tailstock, steady as NC-axis diverse driven toolholders diverse turning toolholders chip conveyor and coolant attachment
Mitutoyo digital measuring system consisting of an ABSOLUTE digital dial gauge ID-C112B, mounted on a measuring stand with granite top, including Digimatic mini processor DP-1VR with integrated print function. The system is intended for precise measuring, comparison and testing tasks in the measurement and quality sector. The granite slab is part of the measurement setup and is included in the scope of delivery. Condition • Used Scope of Delivery • Mitutoyo Digital Dial Gauge ID-C112B • Measuring Stand • Granite Slab (300 × 200 × 50 mm) • Digimatic Mini Processor DP-1VR with Push Function • Connection Cable Digital Dial Gauge • Manufacturer: Mitutoyo • Model: ID-C112B (ABSOLUTE) • Code: 543-250B • Measuring Range: 0 – 12.7 mm • Resolution: 0.001 mm • Measuring System: Absolute Measuring System (ABS) • Display: Digital • Data Interface: Mitutoyo Digimatic ...
Bundle of compression springs for tool and mould making The pictured cabinet is not part of the offer. Quantity: approx. 112 pieces of storage viewing containers, each filled Content / Description • Extensive collection of compression springs for tool and mould making • Different diameters, lengths and spring thicknesses • Sorted in mixed colour storage viewing containers • Partly labelled (internal article numbers / dimensions) • Material apparently spring steel, suitable for industrial use No individual counting, no measurement, no variety or completeness guarantee Sale exclusively as a complete bundle, no partial sale. The sale is without a cabinet Contents: Sorted stock of compression springs for tool and mould making. The springs are labeled according to spring class (light, medium, heavy, extra heavy), outer diameter and free length. ...
Equipment: 3-axis digital display. Pinole path has separate digi display. Automatic feed in X-axis and quill. Motorized Z-axis. Tapping device. Coolant system. Machine base. Collet set, SK tool holder. Other machine accessories in box. Drilling capacity in steel45 mm Quill stroke 125 mm Table adjustment transverse 560 mm Table adjustment longitudinal 230 mm Table clamping area 800 x 240 mm Spindle speeds 75 - 3200 rpm max. cutter diameter 80 mm Spindle holder ISO 30 max. distance between work table and spindle nose 460 mm Projection 230 mm Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 580 kg Space requirements approx. 1.2 x 1.0 x 2.1 m Condition: never used / new (5)
" Double-spindle deburring machine / grinding and brushing machine Stationary deburring or grinding machine in heavy industrial design with two horizontally arranged spindles. A main spindle with clamped abrasive media, an additional spindle (according to the switch "additional spindle") can be switched on separately. Machine with protective tray/work tray, emergency stop, main switch and separate control cabinet. Extraction connection available (pipe connection on the side). Control panel with: • Main switch • Emergency stop • On/off button • Switch additional spindle • Brake switch • Operating hour meter (Kübler Codix) Solid welded steel construction, can be screwed together stably. Used condition with usual signs of wear. External dimensions approx.: 1200 x 1100 x 1300 mm (W x D x H) Double-spindle design Electrical connection via separate control cabinet Extraction con ...
3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake Removable chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5)
Tool holders and clamping adapters for BAZ special tool holders and clamping adapters for machining centres of the STAMA-MC series (including MC 440). Stock: Mixed lot with approx. several tool holders, chucks, reducers and spindle adapters. Typical designs include: STAMA special adapter with bayonet/form-fit contour Chuck with slotted clamping heads Reduction adapter for STAMA unit interfaces Mounting elements for special tools Tool carrier with STAMA logo and part numbers (including 150 864 / 150 865)
Lot of inserts consisting of a mixed stock of different inserts in original packaging. Included are different manufacturers, geometries and ISO grades. Partly unopened, partly opened packaging. The item is handed over in its entirety as shown. Content (excerpt from visible brands/types): Sandvik Coromant – numerous ISO plates (PMKNSH), various geometries and grades (e.g. 1044, 12055164, 880-05 06 05H-C-LM, etc.) Walter – ISO plates, including WXP45 and other grades Wohlhaupter – inserts for fine boring tools (XOMT12T308, WHC102 and others) Korloy – various milling and turning inserts Wetec / JD-Tools – ISO plates of various geometries Other manufacturers such as Innotec, Nine9 etc. General features: mixed stock of indexable inserts many original packaging available partly full, partly opened packs Manufacturer mix, mainly branded goods Condition: mostly unused (visible), indiv ...
2× Machine vise BB 120 and 90 mm • Design: machine vice • Adjustment: manual, degree scale available (with a vice) • 1× jaw width approx. 120 mm • 1× jaw width approx. 90 mm • Solid cast/steel construction • Manual spindle actuation
Drilling and milling machine with Powerful 2-speed engine. Recording MC 3 - B16. Drill chuck 3 - 16 mm. Left/right switch. Spindle protection. Fine tuning. Ejection wedge. Clamping threaded rod for tool Related tools. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 70 mm Capacity finger milling machine 16 mm Spindle mount MK3 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 425 mm Table clamping area 700 x 210 mm Connection voltage Vmax. Distance between work table and spindle nose 470 mm Total power requirement 1.5 kW Machine weight approx. 230 kg Dimensions approx. 0.75 x 1.05 x 1.2 m Condition: never used / new (5)
Drilling and milling machine (demonstration machine) with - Cross support - Feed via hand crank - Chip protection - 16mm drill chuck - Mechanical MK tool clamping Drilling capacity in steel 16 mm Projection 180 mm Drilling stroke 85 mm Spindle Holder MK 2 Spindle diameter 47 mm Spindle speeds 320 - 3300 rpm Table adjustment transverse 230 mm Table adjustment longitudinal 100 mm Table clamping area 420 x 155 mm Connection voltage 230 V Total power requirement 0.75 kW Condition: never used / new (5)
Professional lathe 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill mount MK 3 Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5)
Drilling and milling machine with - Variable spindle speed - Digital depth display - Left/right switch - Cross support - Swivelling spindle head - Feeds via hand crank - Tool case with contents Drilling capacity in steel 13 mm Projection 170 mm Drilling stroke 50 mm Capacity finger milling machine 13 mm Spindle Holder MK 2 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 160 mm Table clamping area 500 x 140 mm Connection voltage 230 V Total power requirement 0.5 kW Machine weight approx. 0.06 t Space requirement approx. 0.6 x 0.45 x 0.76 m Attention: Machine is without digital display! Condition: never used / new (5)
Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right Switch Head swivel left/right 90° Spindle protection. incl. toolbox with various tools Drilling capacity in steel25 mm Projection 175 mm Drilling stroke 50 mm Capacity finger milling machine 16 mm Spindle holder ISO 30 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 380 mm Table adjustment longitudinal 175 mm Table clamping area 700 x 180 mm Connection voltage 230 V max. distance between work table and spindle nose max. 320 mm Total power requirement 0.75 kW Machine weight approx. 130 kg Dimensions approx. 670 x 550 x 910 m Condition: never used / new (5)
1x 1308EKTN9/C3 SKF 5x 2720/QCL7C SKF 9x ASNA510V SKF 10x GLY. PG657030A SKF 9x LUCE16-2LS SKF 1x PCM202315M SKF 1x SY1.3/16TF SKF 1x TSN608C SKF 1x U207 SKF 3x 51316 FAG 1x F-50463 INA 1x G18X26X4 INA 1x NKI9/16TN INA 3x M-ASPF207 NTN 2x 1308K J30 SNR 6x MB0 SNR 1x SC232-532EC SNR 1x UCFE205 SNR 1x 1313KJ NSK 19x SAS20CLZ NSK 310x BAM2416OH IKO 103x BAM2816OH IKO 2x BR324120UU IKO 4x LWL15C2R440CST1H/LR IKO 48x ZE3260LWE25Q IKO 44x 90311-52006 Koyo 30x NI2091 Koyo 60x T01264 Koyo 4x JR12X16X13 Torrington 25x NU303E. TVP. C3 NKE and more
Drilling/milling machine with: • Tapping device • Cross table with adjustable guides • Drill quill feed • Manual transmission • SK 40 mount Drilling capacity in steel 40 mm Projection 275 mm Drilling stroke 120 mm Spindle Holder MK 4 Speed range 75 - 3200 rpm Table adjustment transverse 190 mm Table adjustment longitudinal 490 mm Table clamping area 700 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1/1.5 kW Condition: never used / new (5)
Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. Powerful 2-speed engine. Left/Right Switch Head swivel left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. Spindle protection. incl. toolbox with various tools Drilling capacity in steel30 mm Projection 200 mm Drilling stroke 70 mm Capacity finger milling machine 16 mm Spindle mount MK3 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 565 mm Table adjustment longitudinal 220 mm Table clamping area 840 x 210 mm Connection voltage 400 V max. distance between work table and spindle nose max. 470 mm Total power requirement 1.1 kW Machine weight approx. 230 kg Space requirements approx. 0.75 x 1.05 x 1.3 m Condition: never used / new (5)
IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed: B ...
Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...
This Palletising line consists of, Box transport belts, KRONES, Type 465, Model Κ465-924, Y.o.M 1999, Maximum width 350mm/ total length 13m/ 6 pieces (2m/piece)/0.75KW- 400V/ control panel, Palletizer, KETTNER, Type BELADER PRESS ON, Model 99/0441/004, Y.o.M 1999, Available control panel (30 pulses/hour in 61.5L box), Empty pallet station with finished pallet exit roller conveyor, KRONES, Type 454, Model LPMT, Y.o.M N/A, Maximum number of empty pallets: 15pcs/ Available control panel/ 100pallets/hour, Strech Wrapping Machine, FRANPACK, Type 101, Model 991553, Y.o.M 1999, Available control panel, Protective barriers with safety switches, Available with the machines, Available: Immediately , Pallet Sizes: 100 x 120 cm , Capacity: 100 pallets per hour , Condition: Good
maximum number of results exceeded
please refine your search
