pipe grinding used for sale

MAX DIAMETER 200 MAX LENGHT 2500

drill diameter: 2 - 13 mm drilling length: ca.160 mm lip angle: 90 - 135 ° total power requirement: 150 W weight of the machine ca.: 8,5 Kg dimensions of the machine ca.: 20 x 40 x 20 cm Grinding range from 2 - 13 mm Accesories: CBN grinding wheel for HSS tools ER 29/12 pliers set 12 pieces from 2 - 13 mm, increasing by 1 mm, double slotted for intermediate sizes Operation manual Spare part list The machine can be demonstrated in our company. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 150 mm no. of working stations: 2 Stück total power requirement: 0,25 kW motor speeds:: 2900 min 1 Workshop grinding machine 0.25 kW, 400/3 V, 50 Hz., 2900 rpm, Equipped with normal corundum grinding wheels 150x25x51 mm, grain 36 PQ and 60 M, with closed, adjustable steel protective hoods and workpiece supports Includes cable with CEE plug 2 pieces of eye protection shields, size 1 140 x 150 mm, complete with bracket, €60.00 Option: - In stand version Euro 1,192.00 net - With electronically controlled countercurrent brake which the grinding wheels after switching off brakes to a standstill within approx. 3 seconds, Emergency stop mushroom button, as a table machine Euro 1,665,-- net - In stand version with brakes Euro 2,042,-- net ? The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KED II HDZ drum sander or belt sander for sanding timber and other materials. Technical data: Sanding belt: 300 x 1,010 mm Motor: 2.2 kW Dimensions (L x W x H) approx.: 1,050 x 600 x 1,000 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible.

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: ! We have almost all spare parts for Decken S 11 machines in stock! DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL with CE marking 400 V, 50 Hz, with CEE plug and cable #2385 Color white Motorized height adjustment, axial grinding spindle adjustment Machine stand milled + ground, new carrier plate Basic equipment: - including Waldmann LED light - including dust extraction completely without a vacuum cleaner - including protective cover for grinding wheels up to Ø 125 mm - incl. set of techni ...

This 3-axis OKAMOTO ACC 84DX surface grinding machine was manufactured in 2013. It features a table size of 800 x 400 mm and a stone diameter of ø355 mm. With its robust design, this machine is ideal for precision grinding applications. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 84DX machine we have for sale. Contact us for further details.

Cylindrical grinding machine manufactured in 2015. This OKAMOTO OGM 250 UNC III features a maximum machining diameter of 200 mm and a distance between centres of 500 mm. It includes an X-axis travel of 215 mm and a Z-axis travel of 762 mm, providing efficient grinding capabilities. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO OGM 250 UNC III machine we have for sale. Contact us for further details.

This 3-axis FALCON FSG-3A1224H surface grinding machine was manufactured in 2015. It features handwheel graduations of 0.01 mm, 0.002 mm, and 0.2 mm for precise adjustments. The dedicated pendant control panel includes an emergency stop button and an analog meter for enhanced operational safety. If you are looking to get high-quality grinding capabilities, consider the FALCON FSG-3A1224H machine we have for sale. Contact us for further details.

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 10000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW The machine can be viewed under current.: operating key and instruction: DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL 2178 / 02 380 V, 50 Hz, with CEE plug and cable Original paint ! ! Machine is in delivery condition, depending on customer request the machine can be overhauled ! motorised height adjustment, axial grinding spindle adjustment Accessories: Dividing head Sk 40 with dividing disc 24 R with mounting points for optics Dust extraction device without suction cup Halogen lamp Protective cover 3 pcs. transport lugs 1 set of technical sanding instructions Operating key, operating instructions, spare parts list, wiring diagram The ...

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 10000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW The machine can be viewed under current.: operating key and instruction: DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL 465 / 84 380 V, 50 Hz Colour: green ! Original paint ! ! Machine is in conditon from seller ! motorised height adjustment, axial grinding spindle adjustment Accessories: Dividing head Sk 40 with dividing disc 24 R with mounting points for optics Dust extraction device without suction cup Protective cover 3 pcs. transport lugs 1 set of technical sanding instructions Operating key, operating instructions, spare parts list, wiring diagram The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Robotic grinding cell with a KAWASAKI RS50N robot was built in 2018 in Italy by DAN di De Antoni Srl. The system is designed for the automatic grinding of aluminium castings, door handles and other components that require a precise surface finish. The cell can also be adapted for polishing and other finishing processes. Grinding takes place within a closed work space using a specially designed grinding unit. It is equipped with two vertical grinding wheels and an intelligent pressure force system that automatically adjusts the pressure force during operation. This solution effectively removes surface irregularities and ensures repeatable machining results, which is particularly important in mass production. Any contamination generated during grinding is removed on an ongoing basis. The robotic grinding station is equipped with a KAWASAKI RS50N grinding robot with a payload of 50 kg ...

Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, No. of regulating wheel speeds: 4, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.500 mm, Tall: 1.535 mm, Weight: 2.200 kg

Surface grinding machine manufactured in 2016. This OKAMOTO ACC 52 SA features a grinding length of 500 mm and a grinding width of 200 mm, with a maximum table load of 200 kg. The hydraulic table feed rate reaches up to 27 m/min, and the spindle speed can go up to 3,500 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 52 SA machine we have for sale. Contact us for further details.

Hydraulic surface grinding machine Kair TM800x400. Max. table travel: 800mm. Max. cross travel: 400mm. Height over grindstone: 260mm. Main motor power: 3hp. Speed: 2000rpm. Grindstone: 250x40x76mm. Max. dimensions magnetic chuck: 600x300mm. Weight: 1800kgs. Dimensions: 2500x1500x1900mm.

Cylindrical grinding machine manufactured in 2019. This TOS HOSTIVAR UB 25-1000 features a maximum swing diameter of 280 mm and a distance between centres of 1,000 mm. It includes a grinding head swivel range of ±45° and a rapid traverse speed of 2,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the TOS HOSTIVAR UB 25-1000 machine we have for sale. Contact us for further details.

A Studer CNC universal cylindrical grinding machine in need of repair is offered. Mains voltage/frequency: 380V/50Hz, control: Siemens SINUMERIK System 3, drive system: Siemens SIMODRIVE, measuring system: Marposs E5. Including various accessories. Documentation available. An on-site inspection is possible.

The STUDER Internal Grinding Spindle Type 102560B 60,000 rpm is available for sale as a kit with accessories and tools as shown in the photographs. The set includes: STUDER Internal Grinding Spindle Type 102560B Different wheel chucks / accessories for internal grinding Tools and wrenches for assembly and adjustment Support and auxiliary elements Wooden box for storage and transport Condition: Used, from industrial machinery. Ideal set as a spare part or equipment for compatible STUDER grinding machines. The complete kit shown in the photographs is sold. For more information, price, measurements, compatibility or shipping conditions, please do not hesitate to contact us. Available for domestic and international shipping.

Equipment: Precision Six-Jaw Chuck 1. Cylindrical grinding device Partial Setup Coolant system Instruction manual

CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...

Key data: 500 mm, 200 mm

Automatic grinding wheel feeding, automatic transverse adjustment, Table longitudinal movement hydraulically or manually, wet grinding device, electromagnetic clamping plate, Accessories Grinding length: 500 mm Grinding width: 200 mm max. workpiece height: 250 mm Speed 2800 rpm Clamping surface: 600 x 200 mm Total power requirement: 3.7 kW Machine weight approx.: 1,6 t Operating instructions with circuit diagrams Machine can be demonstrated

Weight: 2000Kg approx., Dimensions (L x W x H): 2000x1800x1700 mm, Total power: 8kW

TECHNICAL INFORMATION:, Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm, Dimensions of the regulating grinding wheel (od x id x width): Ø304,8xØ152.4x204 mm, Main motor power: 20 Kw, Voltage: 380 V, Height: 1700 mm, Length: 2000 mm, Width: 1080 mm, Weight: 4230 Kg approx.

Length of the grinding (mm) 6000 Width of the grinding (mm) 2000 Height of the grinding (mm) 1250 Weight: 60T Overall dimensions Width 2940 mm Height 5120 mm Length 16640 mm

Working width: 950 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 970 x 2150 mm Feed motor: 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CALIBRATING SANDING machine SANDINGMASTER SCSB2-900 second hand machine max. working width mm.900 composed by n.2 belts ( 2 separate motors ): 1° belt . calibrating roller in rubber diam.mm.260 . motor power Hp 15 2° belt . pneumatic pad . motor power Hp 10 belt dimension mm. 1900 x 920 volt. 380/50 weigth kgs. 2000

Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS Unitek wide belt sander Excel LC 1350 1N KRT --------------------------- 1-BELT MACHINE WITH COMBI UNIT ROLLER/SHOE FOR SOLID WOOD VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm 1350 - GRINDING BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - Steel CALIBRATION ROLLER mm 180 - GRINDING SHOE WIDTH mm 50 - BAND MOTOR POWER HP 15 - BELT SPEED m/s 18 - FEED MOTOR POWER HP 0.75 - Adjustment gear feed carpet with infinitely adjustable speed m/min 4/ 20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BAND OSCILLATION ECO GEAR PATENT SYSTEM” - 1 PC. DRUM BRAKE for belt braking - Swivel ROLLER for belt tension - 2 pcs. PRESSURE ROLLERS, with rubber coating - EMERGENCY STOP SWITCH EDGE in the inlet - ELECTRONIC DISPLAY ...

Inv. Num. : 7323 Type: BUAJ 30 Producer: Junker Created: 1999 Parameters: Table dimensions: 1380x160 mm Distance between tips: 630 mm Machine weight: 2800 kg

Surface grinding machine STEFOR 8/5 RTB Year of manufacture 1985 Grinding wheel 400 x 127 2 grinding wheel holders Sanding paths 800x x 500 x 480 Weight 3700 kg Length 2.60 m Width 1.60 m Height 1.80 m

Orbital sander Comec LC/15AV Element diameter min/max 10-100mm 4kw main motor 2×0.25kw feed motor Sanding belt dimensions 1220x70mm CE Certified

SPECIFICATIONS: Aggregates: 04 1 fixed unit 3 more swivelling/oscillating units Max. machining thickness mm: 100 Grinding speed adjustable Installed capacity KW: 15.0 Conveyor belt width mm: 250 Pneumatic adjustment Upper pushers arranged on 2 rubberized rails Side bracket for wide workpieces

Inv. Num. : 7287 Type: KGS- 250 AHD Producer: KENT Created: 2001 Parameters: Work table length: 540 mm Work table width: 260 mm Machine weight: 1300 kg

Walter AG Helitronic Power CNC Universal 5-Axis Tool Grinding Machine CNC control HMC 400 CNC X-axis travel 400 mm Y-axis travel 250 mm Z-axis travel 580 mm C-axis (table rotation) ± 200° Max. grinding wheel diameter Ø 200 mm Spindle speed (grinding) 3000 / 6000 rpm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Grinding lenght 6000 mm Grinding diameter 1050 mm

Workpiece holder head compatible with STUDER S30 and S40 grinding machines, completely rebuilt, overhauled and repainted by specialists in grinding machinery retrofit. The unit has undergone a complete reconditioning process to ensure excellent mechanical condition and a presentation in keeping with a rebuilt machine. Features: - Completely rebuilt and overhauled. - Mechanical components inspected and adjusted. - Revised engine and assembly. - Completely renewed paint. - Excellent general condition. - Ready for installation. - Compatible with STUDER S30 / S40. An excellent choice for replacing a worn head or for repair and retrofit projects of STUDER grinding machines. Immediate availability. For more information, photographs, technical characteristics or price, contact us.

Height of points: 150 mm, Dot height: 150mm, Distance between points: 1000 mm, Grinding wheel dimensions (od x id x width): Ø400xØ127x50mm, Indoor head: 4 units, Internal grinding head: 4 units, Centre height: 150mm, Center Height: 150mm, Max. piece weight: 80Kg, Max. workpiece weight: 80Kg, X-axis travel (transverse): 350mm, X-axis speed: 10 meters per minute, Z-axis travel (longitudinal): 1000mm, Z-axis speed: 12 meters per minute, Z-axis resolution: 0.00004, B-axis swivel range: 210°, B-axis rotation range: 210 °, B-axis resolution: 0.0001°, Drive capacity: 10 HP, Grinding wheel diameter: 400mm, Max. width Grinding wheel width: 63mm, Max. Width Grinding Wheel Width: 63mm, Spindle speed range: 0-1000 RPM, Spindle swivel range: 0° - 90°, Head rotation range: 0° - 90°, Tailstock stroke: 30mm, Counterpoint race: 30mm, Equipped with: Fanuc 21i-TB CNC Control, Dimensions: 3350x 213 ...

width of the strips: 100 mm band length: 1250 mm band speed: m/sec tube diameter: 16,5 - 90 mm angle adjustable from - to: 0 - 65 Grad connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0,18 t dimensions of the machine ca.: 1,2 x 0,6 x 1,3 m ipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm Documentation (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mm band length: 2000 mm band speed: m/sec tube diameter: 16,5 - 76 mm angle adjustable from - to: 0 - 65 Grad connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0,17 t dimensions of the machine ca.: 1,3 x 0,7 x 1,1 m ipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface grinder BPH 320A/1000

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Version R: Maschine hat Zentral ...

Centerless cylindrical grinding machine KÖNIG & Bauer M130 MULTIMAT 130 Condition: very good, used Specifications Grinding wheel rotation speeds 35/45 (60) m/sec. Largest grinding diameter 35 mm Smallest grinding diameter 0.8 mm Maximum workpiece length for continuous grinding approx. 200 mm Maximum workpiece length for plunge grinding 130 mm The machine can be viewed by arrangement in our factory in Krefeld. – Errors, modifications and prior sale excepted –

ELB Perfect BD 10 750, grinding area 1000 x 750 mm, year of construction 2004, grinding spindle 10 KW, grinding wheel 400 x 100 mm, automatic dresser with compensation, electric perm magnetic clamping plate 1000 x 750 mm, partial enclosure with suction, water tank with paper belt filter, the machine is partially overhauled, geometry according to the standard of new machine, we are happy to take over the installation / training on site, as well as the subsequent service.

Precision surface grinding machine, COSMOS 7040 SPS, grinding area 700 x 400, grinding wheel 300 x 50 mm, magnetic clamping plate 700 x 400 mm, Mitsubishi PLC control and drive technology, automatic grinding cycle with roughing, finishing, firing and lifting, dressing amount is automatically compensated, highest quality with unbeatable cost-benefit ratio. Machines can be viewed under electricity, test grinding of your workpieces is possible. We are also happy to take care of the installation and training on site, as well as the subsequent service.

COSMOS 1050 precision surface grinding machine, grinding area 1000 x 500 mm, grinding wheel 400 x 80 mm, magnetic clamping plate 1000 x 500 mm, Mitsubishi PLC control and drive technology, automatic grinding cycle with roughing, finishing, firing and lifting, dressing amount is automatically compensated, highest quality with unbeatable cost-benefit ratio. Machines can be viewed under electricity, test grinding of your workpieces is possible. We are also happy to take over the installation and training on site, as well as the subsequent service. For more information, please visit: long-grinding technology

gr. grinding length: 300 mm large grinding width: 150 mm Table movement - longitudinal movement: 2 - 20 m/min Grinding wheel speeds: 3000 rpm electr. Power supply: 380 V, 1.1 kW Dimensions: 1500 x 1100 x 1750 mm Weight: 920 kg

grinding length: 4200 mm grinding width: 1300 mm workpiece height: 550 mm Control: Siemens 840D passage width: 1300 mm electro-magnetic table: 4200 x 1300 mm grinding height: 550 mm grinding motor: 306 kW grinding motor turning speeds up to: 370 U/min grinding motor feed, infinitely variable: 0,5-35 m/min coolant flow rate: 2000 l/min weight of the machine ca.: 50 t dimensions of the machine ca.: 11,21 x 5,25 x 3,85 m Equipment / Accessories: - segment head - diameter 1400 mm - for segment dimensions 120/106 x 41 x 250 mm - number of segments: 1 set = 26 pieces - grinding motor adjustment - in steps: 0,002 - 1 mm - continuous: up to 5 mm/min stepless The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PPSM Habrama 2200 Precision Profile Grinding Machine Rack and Pinion Grinding Machine Manufacturer [manufacturer]: Habrama Type [ type]: PPSM 2200 Control unit: Siemens 840D sl Sinumerik Construction year: 10/2009 Travel paths: X-axis (longitudinal): 2200(2500)mm Y-axis (transverse): 500mm Z-axis (vertical): 410mm C-axis: +30°/-30° B-axis: +20°/-20° U-axis: 105mm W axis: 125mm B2 axis: +20°/-20° Workbench: 390 x 3.750mm Max. table load: 4000kg Feed speed X-axis [feed speed]: 21m/min Feed speed Y-axis [feed speed]: 10m/min Feed speed Z-axis [feed speed]: 6m/min Feed speed C-axis [feed speed]: 2m/min Feed speed B-axis [feed speed]: 6m/min Feed speed U-axis [feed speed]: 4m/min Feed speed W-axis [feed speed]: 4m/min Feed speed B2 axis [feed speed]: 6m/min Grinding head Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 1/min Grinding ...