pipe bending machine used for sale

The tube processing machine is mounted on a mobile base frame.

Additional technical specifications: • Walzendurchmesser jeweils: 100 mm

Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Manufacturer: Carl Kneusel, 3-roll bending machine, hand-operated -Max. sheet width: 1020 mm -Max. sheet thickness: mm -Roller diameter: 55 mm -Dimensions: 1670/580/H1150 mm -Weight: 156 kg

sheet width: 2050 mm plate thickness: 8.0 mm pre-bending capacity: 6.0 mm upper roll diameter: 190 mm lower roll diameter: 180 mm bending speed: 5.2 m/min work height max.: ca. 980 mm total power requirement: 5.5 kW weight of the machine ca.: 3500 kg. range L-W-H: 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device Inclination of the side rollers by handwheels Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50% - free-moving operation electric delivery rollers electric turning/rolling movement digital position display of the ...

GASPARINI electronic folding machine mod. PSG-250/5000 FP FEATURES Axes: R – X – Y1 – Y2 , Z1 , Z2 Folding length: 5,100 mm Pitch between uprights: 4,555 mm Strength: 250 tons. Gooseneck: 465 mm Slide travel: 250 mm Distance between table-slide: 450 mm Control unit: delem Weight: 25,500 kg. Overall dimensions: 6500 x 2300 x 3200 mm Year of manufacture: 2004 Year rebuilt: 2021 CE compliant. PROMECAN pneumatic tie-down. Self-centered lower table with pneumatic tie-down. 1,000 mm motorized backgauge ("X" axle) Height adjustment "R" axis 250 mm. CNC DELEM DA 66W. 4 adjustable motorized turrets Z1, Z2. Folded penetration (axis "Y1, Y2") Low voltage electric pedal operation. Emergency stoppages. Hydrodynamic anti-bending table by hydraulic pumping. Side protections. Level IV safety laser.

sheet width: 3100 mm plate thickness: 9 mm pre-bending: 6 mm diameter of upper rolls: 220 mm diameter of lower rolls: 200 mm side roll diameter: 170 mm min. dia.: 250 mm roll speed: 6 m/min total power requirement: 10,3 kW weight of the machine ca.: 4651 kg dimensions of the machine ca.: 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics  ...

Control Conventional Drive Hydraulic Power [kW] 2.2 Max. sheet thickness [mm] 2 Max. working width [mm] 6020 Max. opening [mm] 150 Max. bending angle [°] 135 Options Long press brake Auction-ID: A1-40982-5

Auction-ID: A1-50251-532

Control Conventional Drive Hydraulic Number of rolls [pcs.] 3 Number of driven rollers [pcs.] 3 Shaft diameter [mm] 75 Diameter upper roller [mm] 225 Capacity diameter round [mm] 60 Auction-ID: A1-40982-35

Auction-ID: A1-40982-140

On metal column With round steel handle length approx. 147 cm Auction-ID: A1-50251-200

sheet width: 2040 mm plate thickness: 6,0 mm distance between columns: 2100 mm roll diam. toproll: 180 mm roll diam. bottom roll: 160 mm total power requirement: KW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 3,5 x 0,85 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working length: 1270 mm Roller Ø: 120 mm Max. sheet thickness: 4.5 mm Sheet thickness at bending: 4 mm electr. Connection: 400 V, 2.2 kW Weight: 1250 kg Space requirement: 2300 x 800 x 1100 mm

brewing length: 2050 mm; size L: 2750 mm; size W: 950 mm; dimension H: 1500 mm; Auction-ID: A1-50090-230

Hand bending machine flat bar max. 16 mm square steel 16 mm round steel 16 mm Weight 45 Kg bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-50523-892

Hand bending machine flat bar 30 x 8 mm square steel 12 mm round steel 15 mm Weight 0.025 t Pack size max. 51 x 31 x 22 cm Condition: never used / new (5) Auction-ID: A7-50523-881

In coffin. Auction-ID: A1-50090-80

Flat bar bending machine Flat steel 100 x 5 mm Square steel 16 x 16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions L x W x H 400 x 290 x 280 mm Weight 35 Kg Auction-ID: A7-50523-869

Stock No.: 4040 PROFILE BENDING MACHINE Manufacturer: ROUNDO, Type: R5 Serial No.: -, Year of manufacture: 1974 Specifications: Upper roller 360 mm Ø Lower roller 360 mm Ø Flat steel 250 x 30 mm Frame steel upright 100 + 140 x 30 dia. 1000 mm Angle steel 120 x 12 mm U-steel UNP 20 mm Load by steel 40 Kg/mm2 48 cm3 Total performance 7.5 Hydraulic.                          Dimensions: Length: 1700 mm, Height: 1200 mm, Width: 1500 mm, Weight: 3800 kg

Auction-ID: A1-50076-524

Plate bending machine 3 ROLL HYDRAULIC MODEL 3000 X 40 MM - YEAR 1997 PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH Nameplate Bending capacity -Plate width : 3000 mm -Rolling plate thickness: 40 mm -Prebend thickness: 30 mm --- minimum rolling ID 550 mm depending on plate thickness and width Rolls dimensions: -Useful length 3100 mm -top roll D 450 mm -side rolls D 410 mm Accessories installed: Central upper support hydraulic control to hold the plate formed into large diameters Side arm hydraulic to support the large diameter being formed Conical bending attachment with hydraulic control of the angle setting for cone rolling, cone bending stopper hardened pad swing-down on the drop-end of the machine. Technical d ...

According to photos, weight estimated Auction-ID: A1-50541-156

: neu : 2024 : 9741 : prompt, Zwischenverkauf v : Türkei : 6500 € : 125.45 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

JUTEC 3000 Bending Machine -Year of construction 2021 -CE marking -Footswitch Dimensions: LxWxH 0.7x0.5x1.3 meters / Weight 200Kg

sheet width: 3200 mm plate thickness: 4.0 mm ST distance between columns: 3300 mm upper clamping bar adjustment: 400 mm Adjustment folding beam: 80.0 mm pivoting angle: 180 Grad clamping capacity max.: 200 KN rear stop: 10.0 - 1600 mm oil volume: 160 Liter total power requirement: 9.8 kW weight: 8500 kg range L-W-H: ~ 4900 x 2000 x 2300 mm from a maintenance workshop good / well-maintained condition () - inspected condition - machine video - https://www.youtube.com/watch?v=RY-amZooeX4 Equipment: - robust CNC folding machine - CNC control unit - CYBELEC DNC 80 PP swiveling control panel, front right 2D graphic display for visualization and multi-simulation 2D graphic programming easy operation - CNC motorized backgauge travel range 10.0 - 1,600 mm pneumatic / retractable gauge fingers adjustment speed max. 250 mm/sec. rear sheet support table with brushes - motorized lower beam  ...

Tube bending machine, Macri Provar, max diam 45 Auction-ID: A1-50595-60

CONTROLS   conventional WORKING RANGE (BENDING)   plate thickness rolling (max.): 6.3 mm   length of straight piece (prebending): 2000 mm ELECTRICAL SPECIFICATIONS   total power consumption: 9 kW DIMENSIONS / WEIGHTS   space requirements -left/right-: 3800 mm   space requirements -front/back-: 850 mm   total height: 1750 mm   total weight approx.: 3700 kg Technology for the production of tanks, mixers, cylindrical vessels, welding technologies... MACHINERY FOR TANK PRODUCTION -Sheet metal rolling machine, length 2 meters, Jelšingrad 2000/6.3mm with the option of rolling pipes and profiles at the end of the rollers. –Roller lines for assembly and welding of shells and dish ends with automatic movement, complete set of driven rollers –Welding device for automatic longitudinal welding of shells VARSTROJ - Fronius, length 2 m with welding power source –Machine for di ...

Lg.Nr. 26254 Technical data: - Max. working width 1310 mm - Max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Upper beam is operated with side hand crank - Max. stroke upper beam 85 mm - Max. adjustment bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 2250 x H 1250 x D 450 mm - Weight approx. 620 kg

MEBUSA KM 50/25 SY hydraulic bending machine. Nominal bending force: 50 t.Folding length: 2,500 mm.Equipped with 2 axes and numerical control. Hydraulic drive. Pedal drive. Main motor power: 4 kW. Machine refurbished in 2022 by AXIAL MACHINERY. During the refurbishment, new hydraulic tie-downs were installed. According to the information provided, the machine was in good working order as of 13/11/2024. Total weight and dimensions of the machine not verified. It is recommended to confirm the weight and dimensions before organising transport. Possibility of loading onto a truck by overhead crane available on the premises. Condition and content as shown in the photographs. Auction-ID: A7-49809-9

sheet width: 2050 mm plate thickness: 10.0 mm ST pre-bending: 8.0 mm ST diameter of upper rolls: ~ 220 mm side roll diameter: ~ 170 mm diameter of lower rolls: ~ 190 mm bending speed: ca. 2.0 + 5.0 m/min Control: ELAP LYNX oil volume: 80.0 Liter voltage: 380 V total power requirement: 5.5 kW weight: 5000 kg range L-W-H: 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit ELAP LYNX Operation – control of all rolls and machine axes Digital position display Manual operation via joysticks Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending o ...

plate width: 1020 mm plate thickness: 4 mm pre-bending: - diameter of upper rolls: 110 mm total power requirement: 2,2 kW weight of the machine ca.: 900 Kg dimensions of the machine ca.: 2,1 x 0,7 x 1,2 m Fasti three-roll plate bending machine / plate rolling machine In excellent condition. The machine was completely overhauled in 2016. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5-color R23847/15 PROPHETEER flexographic printing machine 18" Model: 1800 Built: 1998 available: immediately 5- Colors for labels and other products e.g. for cups / cups 18 Corona Car register Stacker Video Scanner Flat-in diameter: 1016 mm Available: immediately

R25532/08W Cosmos Vega Folding Carton Gluing Machine Model: 145 Built: 2003 refurbished 2010 for corrugated board Available: immediately

Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

6-Colors R25476/17 ALLIED GEAR Labels Flexographic Printing Machine Model: Flexomaster Built: 1995 Availability: instantly 6 colors 6 Anilox rollers Paper cutters Lamination Transporter Power unit UV dryer Video body plate (JM Heaford) Still in operation: Yes Available: by arrangement

R26107/09 FISCHER & KRECKE Two-sewn flat bag machine Model: Perfect Built: 60s available: immediately Bag width: 80 - 200 mm Bag length: 160 - 480 mm 4-colour printing unit Available: immediately

CAP.: 10 000 BTLS/H OF 1.5 L,

4-color R23240/17 SHIKI label press Model: PC 45 M Built: 1992 Web width: 280 mm Availability: instantly 3 - coloured or 4 - coloured (optional) Printing width: 270 mm, min. 50 mm max. feed: 7, approx. 180 mm Accessories: Rolling unit for rollers up to 100 cm in diameter Winding unit for small rolls pneumatic remaline hole on both sides Speed: 7000 cycles/h max. Products: Hole edge adhesive labels, adhesive labels, hole edge cardboard labels, tickets with and without printing - can punch, print, embosse, number, perforate, punch Available: immediately

R25591/08V KECK Folding Carton Adhesive Machine Model: SF 80 Built: 1990 Availability: instantly Unused: 800 mm Fasson glue work from the cliché Longitudinal cross-gluing, selective - Striped glue for 1 x longitudinal bonding, cliché glue for cross-gluing Still in operation: Yes Available: immediately

refurp-up in 2007 Spare parts Still in operation: Yes Available: immediately

BOTTLES & JARS!

Machinery and equipment for the production of cement, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own e ...

Machinery and equipment for the production of concrete blocks, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buye ...

Format: 700 x 1020 mm R26060/18 SAKURAI screen printing machine Model: SCA 102 Built: 1989 max. print size: 700 x 1020 mm Availability: instantly automatic screen printing line high speed cylinder Special version: min: 500 x 350 mm Sheet transfer station can be folded on one side optical front edge control mechanical double-arch control via friction rollers pneumatic squeegee pressure control and sieve clamping PERFECTION high-performance dryer 1120/4: Inlet width 1100mm, 2 warm and 2 cooling zones with UV dryer MIRUS forklift model SV Etc. Available: immediately

R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately

Ladies and gentlemen, we offer: Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own ex ...

8-color format: 70 x 100 cm<br><br><br><><<br>Verf Gbar: Instant

4 + 4 bags Sniffer Output Available: Immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately