137,476 used machines on RESALE, but how to find them? Machine Search
This lot must be collected by the buyer himself. Auction-ID: A1-51062-169
Auction-ID: A1-51267-5073
Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamps, pipe clamps, pipe clamping systems, mounting devices for pipes, quick-release pipe clamps, pipe quick-release clamps -Pipe clamping bracket: Pipe quick-release clamp -Clamping range: Ø 25 to 180 mm, see photos -Number: 3x tensioning brackets available -Price: per piece -Dimensions: 160/100/H270 mm -Weight: 3.5 kg/piece
Pipe reciprocating saw, pipe jigsaw, beam jigsaw, reciprocating saw, guide holder, pipe clamp -Manufacturer: Fein, holder for pipe reciprocating saw type AST 663 or similar -Clamping: with lashing strap -Number: 2x holders available -Price: per piece -Box dimensions: 390/310/H425 mm -Weight: 25 kg/piece
Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamps, pipe clamps, pipe clamping systems, mounting devices for pipes, quick-release pipe clamps, pipe quick-release clamps -Pipe clamping bracket: Pipe quick-release clamp -Clamping range: Ø 70 to 250 mm, see photos -Quantity: 1x tensioning bracket available -Dimensions: 400/200/125 mm -Weight: 6.8 kg
Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, serial hole punch, punching machine, punching press -Box tube punch: 50 x 30 mm -2x quick-change tool holders (for round tubes and rectangular tubes) -with tools round tube punch and rectangular tube punch -Coordinate stop -Protrusion: 155 mm -Quick-change system punching -Side and depth stops -Max. punching capacity: 36 t -Weight: approx. 2000 kg
bending speed: 2.1 m/min Bending capacity - square: 30x30 mm bending capacity - flat iron: 80x15 mm Bending capacity - flat iron on edge: 50x10 mm tube diameter: 1 oder 60x2 mm Shaft diameter - upper: 35 mm Shaft diameter - lower: 30 mm total power requirement: 0,75 kw range L-W-H: 650 x 500 x 1300 mm weight: 170 kg Standard features: - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
steel pipes fi 51 mm, wallthikness ca 2,3 mm , lenght 6,5 meter Auction-ID: A1-51511-45
Equipped with foot control and various accessories. Auction-ID: A1-50997-15
UNUSED, Metal casing pipes for pile driving. Normally used in the construction of bridges, ports, decks, and piers. The driven pipes is filled with concrete, creating an extremely resistant structure. Total available weight is 750 tons. SALES VALUE PER TON $ .990,00 USD / KG
Waste stainless steel pipes ( 42CrNi18-10 ) Dimension 20 x 1 x3000 mm 39 pieces à'3 meters s
steel pipes fi 38 mm, wallthikness ca 2,3 mm , lenght 6,0 meter Auction-ID: A1-51511-59
steel pipes fi 34 mm, wallthikness ca 2,3 mm , lenght 6 meter Auction-ID: A1-51511-58
Pipe belt conveyor in mint condition VECOPLAN type VRF 500 P. Never used before! Including drive station and deflection station, without belt! Drive station with 15 kW Flow rate approx. 200 m³/h Length approx. 65 running metres, diameter 500 mm
steel pipes fi 27 mm, wallthikness ca 2,3 mm , lenght 6 meter Auction-ID: A1-51511-57
Offer 26161 Technical data: - Rated power at 50% ED 25 kVA - Max. welding power 107 kVA - Adjustable projection 140 - 500 mm - Welding values - sheet steel 6 + 6 mm - Brass sheet 3 + 3 mm - Aluminum sheet 1.2 + 1.2 mm - Electrode force adjustable 17 - 278 daN - Required air pressure 6 - 10 bar - Cooling water volume 8 l/min - Drive 400 V - Space requirement approx. W 670 x H 1250 x D 1600 mm - Weight approx. 240 kg - with : - DALEX MPS 200 welding control - E. Foot Switch
Kieserling WRUW1 bar straightener for 5 -30mm bar diameters. Speed 40m/min. New set of spare straightening rolls
This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information.
Complete Reifenhäuser extrusion line for thin-walled PP pipes For sale is a complete extrusion line for the production of thin-walled pipes made of polypropylene (PP). The system covers the entire production process – from material supply and extrusion to vacuum calibration, cooling, hauffing and length measurement to automatic cutting and outfeeding. The line is currently under construction at the Alicante site in Spain and can be visited by appointment. The sale is preferably carried out as a complete system. TECHNICAL SPECIFICATIONS • Application: Production of thin-walled PP tubes• Documented tube diameters: 40, 50, 60, 80 and 90 mm• Adjustable cutting lengths: approx. 100 to 2,500 mm• Extruder: Reifenhäuser single-screw extruder• Drive power extruder: 4 kW• Electrical modernization: 2005• Drive control: frequency converter• Tube cutting: moving Batten ...
Tube & profiles bending machine ,Tauring Slalom 60-3A 8 rollers for left and right hand bending sense Operation in manual and automatic programmable axis with digital screen readout One-pass bending programmable in different planes manipulator programmable tube turner” 12 mtrs length tube feeder Complete with several set of rolls for tube from 14 to 60 mm - 8 pcs each set = total 140 rolls. Power rotation 3 kw voltage Vac 400/50 power hydraulic bending 2,2 Kw
A TRUMPF CNC laser tube cutting system is offered. Max. tube length/outer circle diameter: 6500mm/150mm, Z-axis travel: 170mm, laser power: 2700W, max. material thickness steel/stainless steel/aluminum: 8mm/5mm/4mm, operating hours: 86567h, laser operating hours (laser on/beam on): 81557h/27316h. Including PRS 3001 part-removal station with brush table and LoadMaster Tube with bundle magazine LD 6000. Overall dimensions X/Y/Z: approx. 16000mm/8200mm/2800mm, weight: approx. 17.5t. An on-site inspection is possible.
tube diameter: 60 mm wall strength: 6 mm bending radius min.: 180 mm total power requirement: 5,5 kW weight of the machine ca.: 1300 t dimensions of the machine ca.: 3500 x 1250 x 1300 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 22186 Technical data: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Solid material up to approx. 30 mm - Max. bending angle 180 ° - Bending radius 2 x D - Drive 400 V / 1.5 kW - Space requirement approx. W 4500 x H 1400 x D 1000 mm - Weight approx. 600 kg - with - Digital bending angle display + bending angle fine adjustment - Mandrel bending device 3.0 m. with hydr. Withdrawal - Bending tools 20 R 60 ; 22 R 66 ; 25 R 75 mm - 25 R 50 ; 38 R 114 mm - various bending mandrel e 3000 mm
: gebraucht : 1988 : 090151 : prompt, Zwischenverkauf v : Italien : 12800 € : 1 : 42 mm : 4665 mm : 800 mm : 1160 mm : 1470 kg : 42 x 2,5 mm : 40 x 1,2 mm : 30 x 40 x 1,7 mm : 40 x 30 x 1,3 mm : 255 mm : 22 mm : 180 ° : 90 °/s : 5.5 kW : 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you ma ...
: neu : ca. 12 - 14 Wochen ab Auf : Italien : 38900 € : 742.99 € : 64 mm : 4000 mm : 950 mm : 1250 mm : 850 kg : 10 cm³ : 64 x 3,3 mm : 2 mm : 60,3 x 2,2 mm : 60 x 60 x 2 mm : 40 x 60 x 4 mm : 60 x 40 x 3 mm : 76 mm : 200 mm : 20 mm : 210 ° : 4.2 kW : 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending spee ...
tube diameter: 48 mm bending radius max.: 90 ° total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,8 x 0,8 x 1,2 m Electro-hydraulic mandrel tube bending machine with - four-position bending angle pre-selection - bending tools: 48.3, 42.4, 33.7, 1/2 - mandrel length: 4500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS PLC SIEMENS SIMATIC FEEDSTOCK TUBE external diameter min.: 15 mm external diameter max.: 70 mm wall thickness min.: 1 mm wall thickness max.: 5 mm lenght max.: 7000 mm PRODUCT (PROFILE, TUBE) length min.: 100 mm lenght max.: 1000 mm ELECTRICAL SPECIFICATIONS total power consumption: 7.5 kW Components: - RASACUT SC - Tube feeding system 1000 - RASAFAS 1000 - RASAPLAN XY 1000 - RASACHECK 1000 - RASACLEAN ET / Turbodry 1000 - Dust extractor
CONTROLS PLC SIEMENS SIMATIC MULTI PANEL FEEDSTOCK TUBE external diameter min.: 8 mm external diameter max.: 90 mm Round tube min. 8 mm max. 90 mm Square tube min. 8x8 mm max. 80x80 mm Rectangular tube min. 15x10 mm max. 60x85 mm
Sell pipe track system from the manufacturer BANSS with storage and retrieval conveyor and pneumatic pipe track switches. Pipe tracks are equipped with sliding rails. System is already professionally dismantled and ready for loading. Was only slightly in operation. Very neat condition. Plans of the company BANSS available. Empty hook conveyors and empty hook tracks included in the package. Pictures show the condition before dismantling
Highly automated CNC tube bending cell Rosenberger RB20 Typical application The RB20 series is designed for cold bending of one or more bends on pipes It is used in industries such as the automotive industry, furniture manufacturing or plant engineering, where precise series bending is required. Technical features and function Type: ROSENBERGER RB20 (built in 2003) Performance & geometry: Servo-electric precision drive with a cold bending capacity of max. Ø 20 x 1.5 mm in steel. High flexibility due to freely selectable bending planes within the 78 mm tool height as well as generous 3-axis travel paths (X/Y/Z: 260 × 146 × 1,170 mm) Control technology: The logical processing is carried out via a robust Siemens Simatic S7-300 PLC, paired with an industrial control panel from B&R Robot automation: Fully automatic handling (loading/unloading) by means of an integrate ...
Serial Number: 72211351013 • Power: 1200 W • Condition: new old stock • Additional Notes: Speed range 2700–7000 rpm. Voltage 230 V, 50 Hz. Delivered in metal case with accessories, manuals, and exploded parts diagram. Ideal for sanding and polishing pipework and tubing. • A professional-grade tube polishing system. Auction-ID: A7-50988-108
The ratchet thread set is suitable for threading galvanized iron pipes or gas pipelines. Auction-ID: A7-50799-182
The ratchet thread set is suitable for threading galvanized iron pipes or gas pipelines. Auction-ID: A7-50799-282
The ratchet thread set is suitable for threading galvanized iron pipes or gas pipelines. Auction-ID: A7-50799-82
Pressing tool, sheet metal former, forming tool, straightening tool, special punches/mandrel elements, centering or positioning tool -Manufacturer: Mubea, Punching tool: Pipe notching tool, 18 pieces -Matrices: 8 pieces, sizes 1 to 1 1/4 -Stamps: 10 pieces, sizes 1 to 2 -Quantity/Dimensions: see photos/parts list -Submission/Price: complete -Transport dimensions: 360/170/H45 mm 170/150/H30 mm -Weight: 10.7 kg / 3 kg
Thermo Scientific ClipTip F1 12-Channel Micropipette | 30 - 300 PIPETMAN single-channel micropipette | 1 - 10 Auction-ID: A1-51251-104
Various sizes; unused; on 4 pallets; as well as 1x mobile storage bin with various used tubes. Auction-ID: A1-50892-29
1st yoke tube diameter 220mm. 2nd yoke diameter tube 175mm. Lengths of 1090mm and 2450mm. Auction-ID: A1-50892-105
Some with lifting eyes. Lengths varying between 50 and 90 cm. Auction-ID: A1-50663-1437
Tube diameter 42 mm; insulation thickness 25 mm; length 1000 mm; in 2 boxes; Auction-ID: A1-50707-246
Lengths: 67, 77 and 101 cm. Otherwise parcelled items visible in the photos are not included. Auction-ID: A1-50663-1422
1st yoke tube diameter 220mm. 2nd yoke diameter tube 220mm. 3rd yoke diameter tube 220mm. Lengths of 1590mm and 2080mm. Auction-ID: A1-50892-103
Lengths: 67, 77 and 101 cm. Otherwise parcelled items visible in the photos are not included. Auction-ID: A1-50663-1423
maximum number of results exceeded
please refine your search
10 € 
