pipe bender used for sale

Steel pipes, flushing pipes -Diameter: 508 mm -Wall thickness: 8.8 mm -Length: 4,400 mm -Weight: 108 kg/m

AF/Armafix pipe supports, pipe supports -Manufacturer: Armacell, Armafix AF pipe support FX-2-60/64 AF-2 box with 24 pcs. -Article No.: 38407000 -Tube: Ø 60/64 mm -Quantity: 5x box available -Price: per box -Dimensions box: 390/200/H200 mm -Weight: 1,5/pc.

Corrugated pipe, plastic hose, empty pipe -KG Pipe: Bend 15° KG 2000 Polypropylene 4 pieces -Type: KGB DN 110x15° -Nominal diameter: 110 mm / inner diameter 104 mm -Delivery/Price: complete -Dimensions: Ø 130 x 190 mm -Weight: 0.4 kg/piece

Immediately available used exhaust pipe

Immediately available used exhaust pipe

PIPE ASSEMBLY, GALLERY LINE

Flexible extraction arm for welding smoke filter, welding smoke extraction -Welding fume extraction pipe: flexible -Tube: Ø 325 mm -Total length: 2300 mm -Transport dimensions: Ø 325 x 240 mm -Weight: 5.4 kg

Pipe vise, pipe stand, pipe vise, plumber vise -Pipe vise: foldable -Max. clamping range: up to Ø 120 mm -Dimensions: 250/80/H435 mm -Weight: 9.6 kg

Stainless steel couplings, pipe coupling, pipe sleeve, pipe connection -Manufacturer: TEEKAY, pipe coupling AXILOCK-S Type IV -Inside: Ø 57 mm / 2.2 inch -Pressure: 16 bar -Number: 1x clutch available -Dimensions: 95/85/H90 mm -Weight: 0.9 kg

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 250 pieces -Type: RSGU 11/15 D1 W1 -Clamping range: 11 mm -Band width: 15 mm -Quantity: 3x bags with 250 pieces available -Price: per bag -Bag dimensions: 400/300/H60 mm -Weight: 2.5 kg/cart.

Offer gebr. Pipe saw, pipe cutting and chamfering machine Fabr. GF Type RA6 Specifications: Tube Outer Diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz Stepless speed 150 -270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate used, in good condition

Inv. Num. : 7914 Type: PBM 7074 Producer: WEGENER Created: 2015 Parameters: Control system: Siemens Maximum bending angle: 90

Screw clamps, pipe clamps, pipe fixings, hose clamps, cable clamps -Manufacturer: Norma, pipe clamps, 100 pieces -Type: Ø26x15 MM W1D -Clamping range: 26 mm -Band width: 15 mm -Quantity: 7 bags of 100 pieces each available -Price: per bag -Bag dimensions: 400/300/H60 mm -Weight: 1.9 kg/bag

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 33 pieces -Type: RSGU 8/15 -Clamping range: 8 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 30/21/H15 mm -Weight: kg

OPTIONS INCLUDED: - Laser TruFlow 3600 incl. LensLine - TruTops Tube license software - Ejector station 6m with brush table - Outer circuit diameter 250mm incl. set of clamping jaws incl. guide rollers for ejection station - SeamLine Tube - Tropical version - MDE interface - LoadMaster Tube 6m with bundling cavity, 2 clamps - Scratch-free grouping cavity LoadMaster Tube 6m - LoadMaster Tube 6m oscillating transport stroke - Pitch mandrel - Max. outer circle diameter of rectangular tubes: 250 mm - Max. raw material length for automatic loading: 6.500 mm - Max. finished part length: 6.500 mm - Max. workpiece weight: 25 kg/m / 37.5 kg/m kg - Laser Output: 3,6 kW - Laser Type: CO2 - Maximum material thickness mild steel: 10 mm - Maximum material thickness stainless steel: 6 mm - Maximum material thickness aluminium: 5 mm - Control: SIEMENS SINUMERIK 840D - Machine ON  ...

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 99 pieces -Type: RSGU1 10/15 -Clamping range: 10 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 35/23/H15 mm -Weight: kg

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 200 pieces -Type: Ø11x15 W1 -Clamping range: 11 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 35/23/H15 mm -Weight: kg

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Pipe clamps: 90 pieces -Type: Ø12x15 -Clamping range: 12 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 40/28/H15 mm -Weight: kg

Used machine in good condition. Available for immediate delivery. - Laser Type: CO2 - Max. workpiece weight: 120 kg - Laser Output: 3 kW - Maximum material thickness mild steel: 8 mm - Maximum material thickness stainless steel: 4 mm - Maximum material thickness aluminium: 4 mm - Control: CNC - Weight: 17.500 kg - Dimensions (long x wide x high): 18.725 x 6.635 x 2.500 mm

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 89 pieces -Type: RSGU1 15/15 -Clamping range: 15 mm -Band width: 15 mm -Dimensions each: 40/28/H15 mm -Weight: kg

Automatic loading up to 6.5m LoadMaster tube 6,5m with bundle cavity Minimal scratches for LoadMaster tube 6,5m Tube diameter 15mm LoadMaster Tube 6,5 (12mm semi-automatic) Ejection station 3m (incl. conveyor belt) Piece length +1,5m Workpiece tray Nitroline FocusLine ControlLine Laser power control Programmable cutting gas Lens cutting head with 150? focal length SeamLine Tube with interior detection Adaptive clamping technology - feed station Adaptive clamping - sliding chuck - Max. outside diameter of round tubes: 152 mm - Max. outer circle diameter of rectangular tubes: 170 mm - Max. raw material length for automatic loading: 6.500 mm - Max. finished part length: 4.500 mm - Max. workpiece weight: 20 kg - Laser Output: 2 kW - Laser Type: fiber TruDisk 2001 - Maximum material thickness brass: 3 mm - Maximum material thickness cupper: 3 mm - Maximum material t ...

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Kale, pipe clamps 139 pieces -Type: Ø26x15 mm W1 -Clamping range: 26 mm -Band width: 15 mm -Dimensions each: 54/38/H15 mm -Weight: kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: Item No.: 12 00 00 204 RT8 -Profile diameter: 25 mm / 1 -Dimensions: see photos -Dimensions: 175/140/H82 mm -Weight: 3.8 kg

Inv. Num. : 8043 Type: ML 100 3Z Producer: NS MAQUINAS Created: 2017 Parameters: Max. workpiece diameter: 10-114 mm Minimum length of the workpiece: 335 mm Number of sanding belts: 6 pieces Abrasive belt speed: 10-30 m/s Sanding belt dimensions: 50 x 940 mm Weight: 600 kg

tube diameter: 45 mm wall strength: 2 mm bending radius min.: . mm Control: total power requirement: kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 5x0,85x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 47 mm -Mounting: Ø 33 mm -Dimensions: see photos -Dimensions: Ø 125 x 84 mm -Weight: 4.3 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: mm -Hole: Ø 20 mm -Dimensions: see photos -Shipping/Price: complete -Transport dimensions: 163/82/H98 mm -Weight: 4.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 22 mm -Dimensions: see photos -Dimensions: Ø 102 x 113 mm -Weight: 4.0 kg

Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Pipe freezing device ROLLER, S Roller ́s Polar Application range: 20- 60 mm with plastic case and documents ! used, tested ! Dimensions ( case ): 520 x 375 x 125 mm

Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: 3/4 -Hole: Ø 30 mm -Dimensions: see photos -Dimensions: 110/75/H55 mm -Weight: 1.5 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 36 mm -Dimensions: see photos -Dimensions: 91/63/H51 mm -Weight: 0.9 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 15 mm -Dimensions: see photos -Dimensions: 130/65/H65 mm -Weight: 1.3 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: 1 1/4 -Hole: Ø 20 mm -Dimensions: see photos -Dimensions: Ø 72 x 90 mm -Weight: 1.6 kg

Axial fan, axial tubular fan VENTILATORENFABRIK BUCURESTI, IDV BUCURESTI VAS400-4 0,0,0 695 - 1,125 m3/s speed: 1400 rpm motor : 0.25 kW 220 / 380 V inner diameter: Ø 400 mm New !' Dimensions: 460 x 310 x 460 mm

Flexible Piping PAGUS NW 50 flange: Ø 75 mm New ! Stainless steel ! Dimensions: 500 x 80 x 80 mm

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 16 mm -Dimensions: see photos -Dimensions: 300/97/H100 mm -Weight: 3.1 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Hilmor, aluminum tube bending tool for profile bending machine -Profile diameter: 16 mm -Dimensions: see photos -Dimensions: 118/110/H58 mm -Weight: 0.6 kg

Centrifugal fan, centrifugal duct fan RUCK RK125L max. 330 m3/h impeller: Ø 180 mm Pipe diameter: Ø 120 mm motor: 0.0.00 mm 07 kW 230 V AC 50 Hz approx. 1.8 m connection cable New !' Dimensions: 270 x 220 x 250 mm

S-Mouth Pipe Wrench ALARM 1 1/2 11021 DIN 5234 68 mm Chrome Vanadium Steel New ! Dimensions: 440 x 80 x 25 mm

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Ulisch, tube bending tool made for profile bending machine -Type: 3/8 -Hole: Ø 26 mm -Dimensions: see photos -Dimensions: 76/40/H80 mm -Weight: 0.7 kg

ABC Open-end Pipe Wrench ALARM 1 1/2 11034 DIN 5234 67 mm Corner O-Point Jaw Shape for Round and Square Workpieces and Sheets Chrome Vanadium Steel New ! Dimensions: 445 x 90 x 25 mm

Corner Pipe Wrench Set VBW 1 1/2 and 1 No. 951 and No. 115 DIN 5234 Chrome Vanadium Steel New ! Dimensions: 440 x 80 x 25 mm

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Klaeger, pipe bending tool for profile bending machine -Type: R1/2 -Hole: Ø 30 mm -Dimensions: see photos -Dimensions: 86/57/H56 mm -Weight: 1.1 kg

Thread cutting machine, pipe thread cutter -Pipe deburrer: for thread cutting machine -Pipe size: up to inner Ø 58 mm -Dimensions: see photos -Dimensions: 270/250/H75 mm -Weight: 2.7 kg

Clamping device, clamp bracket, clamp clamp, clamping bracket, pipe clamp bracket, pipe clamp, pipe clamping system, mounting device for pipes, pipe quick clamp, pipe quick clamp -Pipe clamp: pipe quick release -Clamping range: Ø 40 to 180 mm, see photos -Dimensions: 230/120/H310 mm -Weight: 3.5 kg

We offer new, unused seamless hot-finished line pipes with high-quality PE and PP coating. The pipes have never been installed and have been stored at their designated location since delivery. Available Specifications: 230 tons – 273 mm x 12.4 mm x 13 m, PE coating, standard: EN 10208-2, L290NB 50 tons – 273 mm x 16 mm x 13 m, PP coating, standard: EN 10208, L290NB Manufacturer Certificate (Mannesmann) available Coating by Rhenania Additional Services: Custom Pipe Cutting – Tailored to fit 40-foot containers for efficient transport International Shipping Available (Shipping costs to be covered by the buyer) Loading Services – We handle the loading process

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 4 pieces -Profile diameter: 21 mm -Hole: Ø 36 mm -Dimensions: see photos -Shipping/Price: complete -Transport dimensions: 205/93/H65 mm -Weight: 4.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 26 mm -Hole: Ø 36 mm -Dimensions: see photos -Dimensions: 87/50/H66 mm -Weight: 0.9 kg