pin used for sale

Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of Make: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Tapping (steel/casting): M25 / M38 Projection (column to spindle centre): 330 – 1,230 mm Headstock travel: 880 mm Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 levels (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Boom height adjustment: 620 mm

Professional Pineapple Peeling & Slicing Machine PINABAR Type: T7 S The Pinabar peels, seeds and cuts pineapples within a few seconds, providing customers with an attractive self-service solution for fresh, ready-to-eat pineapples. Technical data: 230 Volt / 50 Hz Year of Make: 2019 Meter reading only 20,811 cycles Manufacturer: Dutch Industrial Manufacturing (DIM) Application: Supermarket, retail, gastronomy, fruit processing Function checked, machine immediately ready for use Condition, see original pictures!

General SKUR0155 MakePink GmbH Thermosysteme Wertheim (DE) TypeVSD-e 300-300-120-2 Machine number2008 4823 Year of construction2008 Pressure Working pressure0.1 Bar Vacuum possiblecheck Main Features MaterialHastelloy Volume35 Ltr. Surface0.18 m2 Specified Features - Tray dryer Tray dryer:vacuum: Stainless steel housingcheck Stainless steel trayscheck Heating surface0.18 m2 Drying chamber capacity35 Ltr Max. temperature150 degr. C Number of trays2 Tray sizes300x300mm Distance between the trays120mm Max. temperature150 degr.C. With 1 doorcheck Connection for the vacuum pumpDN25 Connections(2x) DN10 Without vacuum pumpcheck MaterialStainless steel 2.4602 (Hastelloy C-22) General Mounted on framecheck LocationBarneveld With switchgearcheck Floorspace2.2x1,0 M Total height2,4 M Weight1150 Kg CEcheck Extra Specificationsin Pink Isolator, Type ISO 1900-700 ...

This Pinacho Taurus 260 was manufactured in 2000. A robust horizontal turning machine, it features a maximum turning length of 1500 mm and a diameter of 520 mm. Equipped with a spindle speed of up to 2500 1/min and a main spindle power of 11 kW, it includes accessories like steady rests, a hydraulic chuck, and tool holders. Consider the opportunity to buy this Pinacho Taurus 260 horizontal turning machine. Contact us for more information about this machine.

This 3-axis Pinnacle LV116 vertical machining center was manufactured in 2008. It offers robust and precise machining capabilities, ideal for a variety of applications. If you are looking to get high-quality milling capabilities, consider the Pinnacle LV116 machine we have for sale. Contact us for more information.

This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information.

Horizontal turning machine manufactured in 2007. This Pinacho Smart-turn6 260 features a distance between centers of 1,500 mm and a maximum turning diameter with soft jaws of 500 mm. It is equipped with a spindle speed of 2,400 rpm and a spindle bore of 80 mm. If you are looking to get high-quality turning capabilities, consider the Pinacho Smart-turn6 260 machine we have for sale. Contact us for further details.

Pink VT 1650-850-1950-14 vacuum tray dryer for a total of 42 trays/inserts with the dimensions of 500 x 800 mm (3 per shelve), usable inner dimensions of the chamber 1710 x 985 x 1950 mm (WxDxH), outer dimensions of the chamber 1940 x 1200 x 2230 mm (WxDxH), 13 shelves with the usable dimensions of 1650 x 850 x 110 mm (WxDxH), total shelf area approx. 19,6 m2, total of 14 shelves including floor, heating medium hot water, heating of the trays/inserts, floor and ceiling, maximum temperature 95 °C, maximum operating pressure vacuum chamber -1/+0.1 bar, maximum operating pressure heating system 3 bar, unladen weight approx. 3700 kg, (2 units available)

PINETTE PEI Vertical compression press 1500T SMC, closing force 1500T

Ref. -No.: 10314 Manufacturer: PINACHO Year of construction: 2005 Type of control: Konventionell Storage location: Halberstadt Country of origin: Spain Travel quill: 180 mm Turning Diameter: 630 mm Turning Length: 3000 mm Turning Diameter Over Bed: 620 mm Cross Movement. (X-Axis): 365 mm Tailstock Quill Diameter: 72 mm Turning diameter over cross slide: 880 mm

Kay Pini wood sawmill ground clearance 650mm frame stroke 500mm Full hydraulics Saw tensioning hydraulic switchgear

Universal CNC cycle separation machine of the brand Pinacho suitable for tooling, fixture construction, training and mold making Circumferential diameter 360mm Center width 1000mm Control Fagor 8055 Tailstock MK 3 Tool station Barufaldi 6-fold Speed 1-4000rpm Connection 380V - 5.5 KW

Universal CNC cycle separation machine of the brand Pinacho suitable for tooling, fixture construction, training and mold making Circumferential diameter 360mm Center width 1000mm Control Fagor 8055 Tailstock MK 3 Tool station Barufaldi 6-fold Speed 1-4000rpm Connection 380V - 5.5 KW

Key data: 400 mm, 1000 mm

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2001 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW - Power DC motor Z-axis: 6.8 Nm - Power DC motor X-axis: 3.4 Nm - Motor pump power: 0.57 ...

Pinomatic cross conveyor for a planing and sawing line Year of construction 2001 Manufacturer Pinomtatic OY Type POS 9+10 S/N P1033 motorised cross conveyor with 7 chain hoists length of the arms: : 6000mm Width of the cross conveyor up to 4000mm ( variable adjustable ) Height: 900mm 6 chain hoists fixed mounted 1 chain hoist can be variably adjusted Voltage 230/ 400VAC

A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible

General SKU446W1481 LocationBarneveld CEcheck MakePink Wertheim GmbH Themosysteme Pressure Working pressure0.1 Bar Vacuum possiblecheck Working pressure trays4 Bar Main Features MaterialHastelloy Volume350 Ltr. Surface2.53 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housing1.4301 Heating surface2,53 m2 Max. temperature95°C Number of trays6 Tray sizes650 x 650 mm Distance between the trays120 mm With 1 doorcheck Connectionscheck MaterialStainless steel 2.4602 (Hastelloy C-22) General TypeWSD 650-650-129-6 Machine number2002 4712 Year of construction2002 Mounted on framecheck Floorspace1,20 x 1,70 m Total height1,90 m Weight1060 kg Extra SpecificationsWith QVF glass condensor bowl, volume 7 l.&:nbsp:Paints & coatingsPowdered foodsGeneric medicinesTray dryersTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyAgrochemica ...

Manufacturer: Pinacho Model: Smart Turn 6/180 Power: 7.5 kW Frequency: 50 Hz Control: FANUC CAPACITY • Center height: 180 mm • Center width: 750–1000 mm • Permissible diameter over bed: 360 mm • Permissible diameter over longitudinal slide: 335 mm • Permissible diameter over cross slide: 198 mm • Bed width: 250 mm SPINDLE • Spindle bore: 42 mm • Spindle nose: CAMLOCK no. 5 (DIN 55027 no. 5) • Spindle taper: Morse taper no. 4 • Number of spindle speeds: 1 • Cutting speed (constant surface speed): 0–4000 U/min FEED • Working feed Z,X (mm/min): 0–10000 mm/min • Rapid traverse Z,X (m/min): 10 m/min TAILSTOCK • Tailstock quill diameter: 58 mm • Tailstock quill travel: 200 mm • Tailstock taper: Morse taper no. 3 MOTORS • Main motor power: 5.5 kW • Feed force longitudinal (N): 4500 N • Feed force cross (N): 3500 N • Cool ...

Lathe Pinacho smart turn 6 BJ 2006

This Pinacho SE325 was manufactured in 2018. A reliable horizontal turning machine, it offers consistent performance for various machining tasks. Ideal for workshops seeking a dependable solution for turning operations. Contact us for more information.

General SKUR0159 MakePink GmbH Thermosysteme TypeVSD-EX 650-650-140-4 Machine number2005 4783 Year of construction2005 Pressure Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialHastelloy Volume250 Ltr. Surface2.7 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface2,7 m² Drying chamber sizes670x670x140mm (4x) With jacketcheck Max. temperature115 degr. C Number of trays4 Tray sizes670x670mm Distance between the trays140mm Max. temperature115 degr.C With containers4x Container sizes650x650x40mm With 1 doorcheck MaterialStainless steel 2.4602 (Hastelloy C-22) With jacketcheck General LocationBarneveld With switchgearcheck Floorspace1,6x1,2 M Total height2,3 M Weight1400 Kg CEcheckPaints & coatingsPowdered foodsGeneric medicinesTray dryersTea, herbs & coffeeFine  ...

Rotor brake, disc brake, electro-hydraulic disc brake, crane brake, disc, drum and storm brakes, overhead crane brake -Manufacturer: Pintsch Bubenzer, rotor brake disc brake unused -Type: SB 23-450x30-80/6 -Braking torque: 1850 Nm -Accessories: incl. 3 sets of replacement burners -Quantity: 2 pieces brake available -Price: per piece -Dimensions: 370/330/H650 mm -Total weight: 105.7 kg/pc.

Manufacturer PINACHO Model RHINO SK – 425 Year 2005 CNC GE Fanuc Series 21i-T Capabilities and advances Distance between points 5,000 mm. Stitch height 425 mm. Support Guides 2 Maximum allowable turning on a bed 850 mm. Maximum turning on transverse carriage 560 mm. Bed width 425 mm. Fast Forward X/Z Axes 10,000 mm/min Work progress X/Z axes 7,000 mm/min Head Head shaft pitch 85 mm. Nose head DIN 55027-nº8 Main Spindle Morse Taper 5 Head speed 0-2,000 rpm Automatic head ranges 2 Main Motor Power 11 kW Turret Automatic Turret Type Turret Positions 8 Counterpoint Hydraulic tailstock rod outlet INCLUDED Ø of the tailstock shaft 96 mm. Tailstock shank travel 215 mm MORSE 6 tailstock cone Equipment Self-centering 3-jaw hydraulic chuck, diameter 300 mm INCLUDED 4-support bezel Ø450 mm. INCLUDED 3-support bezel Ø250 mm. INCLUDED Plate Protection INCLUD ...

General SKULY009 MakePink Wertheim Serial2023 5156 Year of construction2023 Floor space4000 kg Extra Specifications2 m³ Circulation Air-Vacuum Tray dryer, internal dimensions: W=1250W, D=1900 mm H=850mm, external B02000 mm, T=2400 mm, H=2200 mm, Heating 1: heated jacket with oil, electrically heated, heating 2 circ. air heating/cooing - heating oil, electrically heated - all cooling to be supplied by the customer(cooling water), surfcae Ra Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesDryers > Tray dryersIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustr ...

Manufacturer: Pinnacle Model: VMC 2000S Year: 2015 Condition: Used Stock number: 9499 Control system: HEIDENHAIN Work table length: 2200 mm Work table width: 850 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 2000 mm Y-axis travel: 900 mm Travel Z axis: 850 mm Machine weight: 16000 kg

turning diameter:570 mm turning length:- mm control:- Diameter of rotation above the bed slide:360 mm Maximum width:2.000 mm revolutions per minute:max. 2500 U/min :11 kW max. longitudinal feed:7,5 m/min max. transverse feed:7,5 m/min rapid traverse longitudinal:12 m/min rapid traverse cross:15 m/min Pinole diameter:95 mm Pinolenhub:220 mm Pinolen intake: MK 5 weight of the machine ca.:2,97 t dimensions of the machine ca.:3,8m x 1,3m x 2m m Technical description: - Tool turret - automatic - 8-fold (see also options) - CAPTO Revolver Disc - Machine bed - made of perlite casting GG-26 - high stiffness due to strong ribbing - Bed slides - guideways hardened and ground - automatic lubrication of the bed rail - Reitstock - manual - Quick clamp - Operator station - two movable handwheels on the operator panel - a movable handwheel - Control - "Siemens 828 D" CNC control - Siemens "Comfort" (in ...

Details Turning diameter 165 mm Turning length 1000 mm Total power requirement 2 kW Turning diameter over bed 335 mm Rotary diameter via tool carriage 310 mm large turning diameter via cross slide 168 mm Bed width 250 mm Main spindle diameter 42 mm Main spindle nose CAMLOCK n-5 - DIN 55027 Morse taper 4 Spindle speeds 9 Speed range: 60-2000 rpm max. working feed 0-5000 mm/sec Rapid traverse 5 m/min Shaft diameter 48 mm Tailstock-Spindle Travel 140 mm Machine weight approx. 1100 kg Control CNC Control Name FANUC 21i/210i

Digital Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Tailstock

Center height: 225mm, distance between centers: 1000mm, swing over bed/cross slide: 450mm/260mm, spindle bore: 65mm, max. spindle speed: 3000rpm, max. feed rate: 10m/min, tool turret: 4, main motor power: 7.5kW, control: Fanuc 0i Mate TC. Machine dimensions X/Y/Z: approx. 3500mm/1500mm/1700mm, weight: approx. 1550kg, operating hours: approx. 27000h, feed hours: approx. 1329h. Documentation available. An on-site inspection is possible.

Center width: 1000mm, turning diameter over bed/crank/trolley: 360mm/510mm/205mm, spindle bore: 42mm, speed: 2100rpm, machine dimensions X/Y/Z: approx. 1950mm/900mm/1350mm, weight: approx. 750kg. On-site inspection is possible.

weight of the machine ca.: 3,9 t : 50 control: Fanuc changer: 6 fach centre distance: 1500 mm spindle bore: 80 mm available since 22th of september: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1140 mm y-travel: 710 mm z-travel: 610 mm CNC-control: Heidenhain TNC640 table-size: 1300 x 700 mm max. table load: 1000 kg spindle taper ISO: ISO 40 spindle turning speed range: 8.000 U/min feed stepless: max. 10.000 mm/min rapid traverse: 24/24/24 m/min drive capacity - spindle motor: 7,5 / 11 kW tool change unit: 30 Pos. coolant: IKZ 40 bar chip conveyor: kW voltage: 400 V total power requirement: 25 kVA weight of the machine ca.: 9,0 t dimensions of the machine ca.: 3,25 x 3,08 x 3,00 m - Serial No.: 4P11152J1 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - X- and Z-Axis with 6 roller supports for each axis! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: GE Fanuc Series 21i-T Distance between centres: 5000 mm center bore: 425 swing over bed: 850 mm bed width: 425 mm rapid feed: 10000 mm/min working feed: 7000 mm/min main spindle bore: 85 mm Main spindle: DIN 55027-n°8 taper: 5 spindle speeds: 0-2000 U/min Spindle power: 11 KW tailstock quill diameter: 96 mm tailstock travel: 215 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 7.300x1.700x1.900 m Support Guides 2 Swing over cross carriage 560 mm. Automatic ranges 2 Turret type Automatic Turret positions 8 Hydraulic tailstock quill stroke INCLUDED Tailstock taper MORSE 6 3 Jaw Auto-centering hydraulic chuck Ø 300 mm. INCLUDED 4 support steady rest Ø 450 mm. INCLUDED 3 support steady rest Ø 250 mm INCLUDED Chuck protection INCLUDED Complete rear protection INCLUDED Dual handwheel for carriage control INCLUDED Foot pedals for hydraulic chuck operati ...

Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Manufacturer: Prema-Service, Permaflex - pinch valve -Pinch valve pneumatic -Connection: DN100 -Hole circle: Ø 180 x 18 mm -Quantity: 2x valves available -Price per piece -Dimensions: Ø225 x 280 mm -Weight: 15 kg/piece

Punch holder, die holder, notching tool, punching tool, punch, mounting pin, clamping pin, eccentric press, hydraulic press -Mounting pin: Clamping pin for punching tool press tool -Hole: Ø 50 mm / Thread M24 -Quantity: 1x cone available -Dimensions: Ø 50 x 109 mm -Weight: 1.2 kg

Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Manufacturer: Prema-Service, PQV - pneumatic pinch valve -Type: PQV DN 125 -Hole circle: Ø 210 x 18 mm -Quantity: 5x valves available -Price per piece -Dimensions: 350/270/H250 mm -Weight: 17kg/piece

Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Manufacturer: Prema-Service, PQV - pneumatic pinch valve -Type: PQV DN 150 -Hole circle: Ø 240 x 23 mm -Quantity: 3x valves available -Price per piece -Dimensions: 420/285/H310 mm -Weight: 46 kg/piece

Punch holder, die holder, notching tool, punching tool, punch, mounting pin, clamping pin, eccentric press, hydraulic press -Manufacturer: Fibro, mounting pin, clamping pin for punching tool, press tool -Type: 211 12.50.030 -Hole: Ø 50 mm / Thread M30 -Number: 3x cones available -Price: €45 per piece / complete set -Dimensions: Ø 50 x 98 mm -Weight: 1.2 kg

Press-fit device for ceramic pins in rotor shafts Principle: The ceramic pins are fed to a test station via a pneumatic hose by means of a vibrating conveying bowl, where the position of any single-sided bore is checked. This is done with an optical sensor. Wrongly positioned parts are conveyed through a pneumatic slide into a collection container. Pins that are correctly positioned are fed through another pneumatic hose to the separator of the press-fit tool. The actual press-fit process is also carried out pneumatically with a roller bearing guided punch. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too easily into the shaft. With a pressure p2, which can also be adjusted manually, the pin is then pressed into the rotor shaft at full stop. A 5,000 N preloaded disc spring package prevents excessive force from being exerted on  ...

Connector, plug, pin header, socket header -Connector: 3-pin 54 pieces -Type: 3-pin -Article No.: 10170676 PO5017941 -Price/Delivery: complete -Dimensions: 23/11/H8 mm -Weight: 0.02 kg/pc.

I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.

Verboom tenon milling machine Brand: Verboom Type: PN 5 LINKS Standard: BHG / SHA adapted according to the currently valid regulations Labour legislation applicable within the EU Machine data: Pinon milling machine with 5 processing units (1 saw + 4 milling machines) 1. Saw unit positioned over the workpiece, 4.0 kW, ø400 mm 2 tenon milling unit over the workpiece with 2.2 kW 3. Pinon milling unit below the workpiece with 2.2 kW 4. Vertical milling spindle (slot milling unit) with ø40 spindle and 200 mm Clamping length, 4.0 kW direct drive 5. Vertical milling spindle (slot milling unit) with ø40 spindle and 200 mm Clamping length, 4.0 kW direct drive All motors are equipped with zero branch safety, The machine has a pressure guard so that the workpiece must be clamped before the aggregates start, The hood and the protective curtain are equipped with door switch. ...

Gauge block box, gauge blocks, parallel gauge blocks, test pin set, test pins, plug gauge -Manufacturer: Cary, plug gauge test pin set: 3.01 - 3.49 mm -Content / nominal dimensions: see photos -Dimension box: 135/85 / H60 mm -Weight: 0.3 kg

Pin Puller, Pneumatic Pin Pulling Cylinder FESTO stroke: 24 mm rod diameter: Ø 30 mm Pneumatic cylinder: ADVU-50-25-PA 156553 0.8 - 10 bar New ! Dimensions: 290 x 90 x 150 mm

Measuring pins set PAGUS 10 - 13 mm 63 pins step: 0.05 mm in wooden support used ! Dimensions: 240 x 150 x 60 mm

Pin Puller, Pneumatic Pin Pulling Cylinder FESTO stroke: 48 mm rod diameter: Ø 30 mm Pneumatic cylinder: ADVU-50-50-PA 156556 0.8 - 10 bar New ! Dimensions: 375 x 90 x 150 mm

Kaj Olesen TWP54 Pin Bone remover Serial: 10810 2019, stainless pin bone remover, capacity up to 350 - 700Kgs per hour, belt dimensions 1650mm x 350mm, 1Ph

This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system., Capacity: 2000 bottles per hour , Aluminium Cutting: Fords systems , Format: 1 Pint Milk Bottles , Sealing Device: Included , Construction: Fully Stainless steel on product connection Parts , Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over, Collection Table: Inclu ...

pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material -pinch valve pneumatic -Connection: DN125 -Width: 180 mm -Nominal pressure: PN16 -Quantity: 2 pieces available -Price: per piece -Dimensions: 251/265/H345 mm -Weight: 20 kg/piece

Pinion shaft, robot 7th axis, AD138mm, 23 teeth, MG1-02634, ABB, new Attention: This is an original product and not a replica from Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! - Has never been used before and is completely new, - comes from a spare parts warehouse of a certified production company, - is in the original packaging, - We will be happy to measure the pinion shaft for you 12 months warranty We give you a 12-month warranty for these goods from the date of invoice. In the event of a defect that is not the fault of the buyer, the goods can be returned. We will only refund the buyer the price of the product paid to us. Updating in the case of digital components is excluded. Liability for direct and indirect consequential damage is also excluded. Our terms and conditions apply, see our website. Austrian law  ...