pin used for sale

Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: OMAP, Lead screw and feed screw lathe type Al.Pin 180 -Turning length: 1600 mm -Turning diameter over bed: 410 mm -Turning diameter without bed: 570 mm -Turning diameter over support: 230 mm -Spindle bore: Ø 53 mm -Spindle speeds: 12 - 1650 rpm -Three-jaw chuck: Röhm Ø 250 mm -Tailstock mount: MK3 -Drive: 2.2 kW -Accessories included, see photos -Dimensions: 2670/900/H1355 mm -Weight: 1460 kg

Lathe Pinacho Rayo 180

A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible

x-travel: 1140 mm y-travel: 710 mm z-travel: 610 mm CNC-control: Heidenhain TNC640 table-size: 1300 x 700 mm max. table load: 1000 kg spindle taper: SK 40 spindle turning speed range: 10.000 U/min feed stepless: max. 10.000 mm/min rapid traverse: 24/24/24 m/min tool change unit: 30 Pos. coolant: IKZ 40 bar drive capacity - spindle motor: 7,5 / 11 kW voltage: 400 V total power requirement: 25 kVA weight of the machine ca.: 9,0 t dimensions of the machine ca.: 3,25 x 3,08 x 3,00 m chip conveyor: 4,30 x 0,80 x 1,60 m band filter unit: 2,00 x 1,00 x 1,30 m coolant tank: 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor - X- and Z-Axis with 6 roller supports for each axis! The data for this ad was cre ...

turning diameter:570 mm turning length:- mm control:- Diameter of rotation above the bed slide:360 mm Maximum width:2.000 mm revolutions per minute:max. 2500 U/min :11 kW max. longitudinal feed:7,5 m/min max. transverse feed:7,5 m/min rapid traverse longitudinal:12 m/min rapid traverse cross:15 m/min Pinole diameter:95 mm Pinolenhub:220 mm Pinolen intake: MK 5 weight of the machine ca.:2,97 t dimensions of the machine ca.:3,8m x 1,3m x 2m m Technical description: - Tool turret - automatic - 8-fold (see also options) - CAPTO Revolver Disc - Machine bed - made of perlite casting GG-26 - high stiffness due to strong ribbing - Bed slides - guideways hardened and ground - automatic lubrication of the bed rail - Reitstock - manual - Quick clamp - Operator station - two movable handwheels on the operator panel - a movable handwheel - Control - "Siemens 828 D" CNC control - Siemens "Comfort" (in ...

Troester 150mm dia PIN extruder Type: QSM150K, Serial no. 8622/80, Year of manufacture: 1980, but refurbished by Troester 2000 (new screw and barrel section) Power roller feed, L/D ratio 16:1 8 rows of 8 pins, fitted with ASEA 212kW DC variable speed motor and controls (1800rpm). Complete with controls etc and in very good condition.

Ball-lock pins d = 10 mm Wearing length 50 mm Stainless steel with 2 balls 40 pieces in stock

Drive: 30 KW

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Cone cutter and profiling machine First working area - OPENING TABLE WITH TRANSPORTBAND Length: 2600 mm, adjustable speed, inverter controlled. Second work area: PRODUCTION AREA Group of eight with movable longitudinal slide and cone cutter unit, numerically controlled. MULTIPLE CONE CUTTER UNIT: Motor with 7.5 HP, 3000 rpm, inverter-controlled, Spindle diameter: 50 mm, length: 270 mm WORKPIECE RETURN

Roller die line consisting of:- 1 x Troester 200mm pin barrel extruder Type QSM200K-16D power roller feed, 10 rows of 8 pins, L/D ratio 16:1 Serial no. 1816/88, year 1988, With temperature regulation unit, 282kW ASEA DC variable speed motor mounted on rails (moves away from calender to clean out etc) Hydraulic sheeting head linked directly to:- 1 x Adamson 24in dia x 68in wide two roll calender, peripherally drilled rolls cross axis, bush type bearings, motorised nip adjustment with unidrive gearbox 277kW ASEA DC variable speed motor Hydraulic clamping device for extruder Set of 4 x cooling drums Dual wind up and liner applicator Chalking Unit Siemens PLC control. Complete line in excellent condition. PRICE: On request.

I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.

Servo motor with pinion, 3HAC029031 004, ABB, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in its original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Stock# U2448-1 Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 22 kW, 2945 rpm, 380 V, 50 Hz. Machine is equipped with a carbon steel feeding hopper and bottom unloading. The set includes a stainless steel hopper tank mounted on 4 carbon steel legs and a belt conveyor with a polyurethane fabric/plastic belt with a working width of 245 mm and a length of 3800 mm, conveyor construction is made of carbon steel and mounted on legs. The belt is driven by a gearbox with a ratio of i=15, an ex proof electric motor with a power of 1,1 kW, 1415 rpm, 380 V, 50 Hz. Whole thing is mounted on a frame made of carbon steel. Also includes a spare set of ...

HH fuse, firing pin fuse -HH fuse: 10/24 kV -Reduction at purchase: min. 3 pieces -Number: 3x fuses available -Price per piece -Weight: 3.6kg/pcs

Gauge block box, gauge blocks, parallel gauge blocks, test pin set, test pins, plug gauge -Manufacturer: Cary, plug gauge test pin set: 3.01 - 3.49 mm -Content / nominal dimensions: see photos -Dimension box: 135/85 / H60 mm -Weight: 0.3 kg

SPECIFICATIONS: Cross-cut saws - saw blade diameter: mm 250 Milling unit - shank diameter: mm 35 Height of trunnion cutting shaft: mm 150 Manual guide carriage with 2 tilting guide rails

rack, toothed rail -Rack: Toothed rail, straight teeth -Length: 1000 mm -Width: 60 mm -Height: ha 60 mm -Module: 6 (see photo) -Dimensions: 1000/60/H60 mm -Weight: 25.1 kg

Connector, plug, pin header, socket header -Connector: 3-pin 54 pieces -Type: 3-pin -Article No.: 10170676 PO5017941 -Price/Delivery: complete -Dimensions: 23/11/H8 mm -Weight: 0.02 kg/pc.

Press-fit device for ceramic pins in rotor shafts Principle: The ceramic pins are fed to a test station via a pneumatic hose by means of a vibrating conveying bowl, where the position of any single-sided bore is checked. This is done with an optical sensor. Wrongly positioned parts are conveyed through a pneumatic slide into a collection container. Pins that are correctly positioned are fed through another pneumatic hose to the separator of the press-fit tool. The actual press-fit process is also carried out pneumatically with a roller bearing guided punch. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too easily into the shaft. With a pressure p2, which can also be adjusted manually, the pin is then pressed into the rotor shaft at full stop. A 5,000 N preloaded disc spring package prevents excessive force from being exerted on  ...

Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Sprocket: 2 pinions, 3/4 inch 14 teeth -Diameter: 93 mm -Shaft mount: inner Ø 40 mm -Dimensions: see photos -Quantity: 70x sprocket available -Price: per piece -Total dimensions: Ø 93 x 80 mm -Weight: 1.5 kg/piece

I am selling an Automatic CNC Machining Center for BLOCK-HOUSE production AUER BL100. Built in 2001. Entrance table / max. element length 9.00m Trunnion cutter up to dia.200mm / 4kW Horizontal milling machine up to dia.200mm / 4kW Vertical milling machine up to dia.200mm / 4kW Automatic feed system AUER Austria BL100MS Programming Zebra Label Print TOS Svitavy PWM 45.11 End-cut Saw Rear Favorable for timber constructions! Available soon.

grinding stone, grinding pin -for internal grinding machine -1 Collet chuck -Cone mount: Ø 53 mm -Grinding pins: various diameters -Outer diameter: 1-40 mm -Sale: only complete set -Weight: 6 kg

Punch holder, die holder, notching tool, punching tool, punch, mounting pin, clamping pin, eccentric press, hydraulic press -Mounting pin: Clamping pin for punching tool press tool -Hole: Ø 50 mm / Thread M24 -Quantity: 1x cone available -Dimensions: Ø 50 x 109 mm -Weight: 1.2 kg

Tenon milling machine / tenon cutting and slitting machine Manufacturer: Kölle Model: Z40 Year of construction: 1992 1 x Sawing 1 x Milling

Cone cutter Martin Tenon cutting and slitting machine Type T27 Speed of the milling shaft 3000 + 4500 rpm Height adjustment range of the milling shaft 145 mm Largest diameter milling tool 390 mm Maximum clamping height 135 mm Spindle diameter 40 mm Milling motor 5.5 / 7.5 kW Speed of the cut-off saw 3000 rpm Height adjustability of the cut-off saw 190 mm Maximum cutting height cut-off saw 100 mm Maximum saw blade diameter 350 mm Lateral adjustability of the cut-off saw 250 mm Engine power cut-off saw 1.1 kW Saw blade spindle diameter 30 mm Travel of the sliding table 1270 mm Shipping Dimensions Machine on pallet 670 kg 1800 mm x 1050 mm x H 1600 mm Sliding table on pallet 83 kg 1200 mm x 800 mm x H 1300 mm Stop rail approx. 10 kg 1860 mm x 160 mm x 160 mm

Pin Puller, Pneumatic Pin Pulling Cylinder FESTO stroke: 24 mm rod diameter: Ø 30 mm Pneumatic cylinder: ADVU-50-25-PA 156553 0.8 - 10 bar New ! Dimensions: 290 x 90 x 150 mm

Measuring pins set PAGUS 10 - 13 mm 63 pins step: 0.05 mm in wooden support used ! Dimensions: 240 x 150 x 60 mm

Zelfuitlijnende draaiinrichting één aangedreven eenheid één niet-aangedreven eenheid WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 10 ton Number of wheels: 8 wheels Coating material on wheels: rubber

Pin Puller, Pneumatic Pin Pulling Cylinder FESTO stroke: 48 mm rod diameter: Ø 30 mm Pneumatic cylinder: ADVU-50-50-PA 156556 0.8 - 10 bar New ! Dimensions: 375 x 90 x 150 mm

Swivel pin FESTO ZNG-125 31760 Spigot diameter: Ø 25 mm New ! Dimensions: 144 x 210 x 50 mm

ca.110 990436110005 New Auction-ID: A1-50849-619

Alignment pin set WMW D 45 ( D45 ) 751 82 453 10 SK 45 Spigot: Ø 40 mm Dimensions: 177 x Ø 58 mm Set consists of 2 pieces ! New !' Dimensions(Packing): 260 x 120 x 90 mm

Auction-ID: A1-47450-2354

Stock# U2448-2 Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 22kW, 2940 rpm, 380 V, 50 Hz. Machine is equipped with a carbon steel feeding hopper and bottom unloading. Whole thing is mounted on a frame made of carbon steel. The set includes a spare set of milling discs and pins. Not included technical documentation.

Kaj Olesen TWP54 Pin Bone remover Serial: 10810 2019, stainless pin bone remover, capacity up to 350 - 700Kgs per hour, belt dimensions 1650mm x 350mm, 1Ph

hobbing length: 2100 mm milling width: 300 mm max. module: 16/18 min. module: total power requirement: 10 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: SAR400 - self-aligning 1 driven unit 3 non-driven units diameter of wheel: 370 mm

Mobile Plastering Machine 80 Auction-ID: A1-50663-1529

This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system., Capacity: 2000 bottles per hour , Aluminium Cutting: Fords systems , Format: 1 Pint Milk Bottles , Sealing Device: Included , Construction: Fully Stainless steel on product connection Parts , Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over, Collection Table: Inclu ...

Dimensions (L/W/H): 2160x1080x1650 mm Weight: 1500 kg Total power requirement: 12 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1760x1150x1320 mm Weight: 1100 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Winkelanlage Schneider Type: SK-Z3 Milling spindle Diameter 30 mm; motor with 4.8/5.6 kW and 1450/2900 rpm Spindle clamping length 150 mm Tool diameter maximum 200 mm Table size 1150 x 850 mm Extendable table support length 2000 mm Slotted spindle Diameter 40 mm; motor with 4.6 kW and 2830 rpm Spindle clamping length 130 mm Cross-cut saw with carbide-tipped saw blade; Motor 3 kW and 2860 rpm Tenon table Dimensions 780 mm x 330 mm With stop rail, with pneumatic workpiece holder Travel 2000 mm 3 suction connections 1 milling fence with fine adjustment, DBGM SH-System 90/1 from S. Hoomann GmbH with 3-roller feed Dimensions Dimensions 3100 mm x 2000 mm x H 1500 mm Weight 1200 kg Packing Dimension 1 pallet 2000 mm x 2200 mm x H 1500 mm Weight approx. 1000 kg 1 pallet 1200 mm x 800 mm H 1000 mm Weight approx. 200 kg

Tenon cutting and slitting machine No further data known

Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall  ...

pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material -pinch valve pneumatic -Connection: DN125 -Width: 180 mm -Nominal pressure: PN16 -Quantity: 2 pieces available -Price: per piece -Dimensions: 251/265/H345 mm -Weight: 20 kg/piece

Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Manufacturer: Prema-Service, Permaflex - pinch valve -Pinch valve pneumatic -Connection: DN100 -Hole circle: Ø 180 x 18 mm -Quantity: 2x valves available -Price per piece -Dimensions: Ø225 x 280 mm -Weight: 15 kg/piece

Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Manufacturer: Prema-Service, PQV - pneumatic pinch valve -Type: PQV DN 125 -Hole circle: Ø 210 x 18 mm -Quantity: 5x valves available -Price per piece -Dimensions: 350/270/H250 mm -Weight: 17kg/piece

Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Manufacturer: Prema-Service, PQV - pneumatic pinch valve -Type: PQV DN 150 -Hole circle: Ø 240 x 23 mm -Quantity: 3x valves available -Price per piece -Dimensions: 420/285/H310 mm -Weight: 46 kg/piece

Welding manipulator Type: P82 14VF Hydraulic lifting and tilting Electric turning MANIPULATOR: yes Capacity: 9,5 ton