We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,580 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Control cables, adapter cables, interface cables AMT, ALFING MONTAGETECHNIK GmbH 7016700 Length: approx. 4.0 m 23-pin Manufacturer: ERNST+ENGBRING used, tested ! Dimensions ( packaging ): 450 x 400 x 50 mm
used
Control cables, adapter cables, interface cables AMT, ALFING MONTAGETECHNIK GmbH 7017129 Length: approx. 4.0 m 25-pin Manufacturer: ERNST+ENGBRING used, tested ! Dimensions ( packaging ): 470 x 400 x 50 mm
used
Decentralized valve terminal connection B & R 7XV124.50-12 24 digital outputs 24 VDC for 25-pin DSUB multipole connector New ! Dimensions: 83 x 58 x 20 mm
used
Circular connectors, angled cable socket AMPHENOL-TUCHEL C164 R C164 10E 005 933 1 5-pin max. 15A 250V AC / 75V DC Housing: Plastic, red 2x LED New ! Dimensions: 73 x 52 x 30 mm
used
Adapter cable, control cable, interface cable KREMLIN 129.381.095 Length: approx. 200 mm 6-pin ADEMS25 ADEMS 24 New ! Dimensions ( cable ): 200 x 65 x 25 mm Dimensions ( packaging ): 280 x 200 x 30 mm
used
Plug set, socket and plug HARTING HAN 24 E ( HAN24E ) socket insert screw connection 24 E 09330242701 pin insert screw connection 24 E 09330242601 socket housing M25 19300241231 grommet housing PG21 09300241520 New ! Dimensions: 130 x 60 x 130 mm
used
Throttle valve, hydraulic valve, for pipeline installation ORSTA HYDRAULIK 20-1.01 RV TGL 26243 / 30 Nominal pressure: 16 MPa (160 bar) Nominal diameter: 20 mm Adjusting device: Adjusting pin with lock nut, sealable ! New ! Dimensions: 140 x 80 x 45 mm
used
Throttle valve, hydraulic valve, for pipeline installation ORSTA HYDRAULIK 06-1.01 TGL 26243 / 20 Nominal pressure: 32 MPa (320 bar) Nominal diameter: 06 mm Adjusting device: Adjusting pin with lock nut, sealable ! New ! Dimensions: 78 x 34 x 34 mm
used
Flow relief valve with valve interlinking unit ORSTA 10-02.01 TGL 26244 / 20 Nominal flow rate: 40 dm3/min ( 40 l/min ) Nominal pressure: 32 MPa (320 bar) Actuator: Adjusting pin with lock nut ! Valve Interlinking Unit 10-05 TGL 26265 / 20 New ! Dimensions: 180 x 80 x 60 mm
used
Throttle valve, hydraulic valve ORSTA, EINSPRITZGERÄTEWERK AKEN AOS 16 TGL 10962 nominal pressure: 160 kp/cm² ( approx. 160 bar ) nominal diameter: 16 mm Flow rate max: 40 l/min Pipeline installation, without check valve, with adjusting pin 2x Connection thread: M26 x 1.5 Installation length: 122 mm used, tested ! Dimensions: 122 x 142 x 62 mm
used
Hydraulic cylinder, double-acting ORSTA C1-50/32x320 TGL 10906/8 Piston diameter: Ø 50 mm Rod diameter: Ø 32 mm stroke: 320 mm Nominal pressure: 16 MPa ( 160 bar ) Rod thread: M18 x 1,5, length: 15 mm 2x pivot pin: Ø 30 mm, length. 20 mm New ! Dimensions: 490 x 120 x 85 mm
used
Hydraulic cylinder, double-acting, with pivot pin REXROTH CD 70 S 25/16 - 0040 ( CD70S25/16-0040 ) Z11/13HEDM11A N20559 piston diameter: Ø 25 mm rod diameter: Ø 16 mm stroke: 40 mm rod female thread: M10 x 1.0 5, Depth: 25 mm 2x pivot: Ø 19 mm, Length: 18 mm used, tested ! Dimensions: 160 x 76 x 54 mm
used
Throttle valve, hydraulic valve ORSTA, EINSPRITZGERÄTEWERK AKEN AOS 8 TGL 10962 nominal pressure: 160 kp/cm² ( approx. 160 bar ) nominal diameter: 8 mm Flow rate max: 10 l/min pipe installation, without check valve, with adjusting pin 2x Connection thread: M16 x 1.5 Installation length: 90 mm used, tested ! Dimensions: 90 x 100 x 47 mm
used
Throttle valve, hydraulic valve ORSTA, EINSPRITZGERÄTEWERK AKEN AOS 13 TGL 10962 nominal pressure: 160 kp/cm² ( approx. 160 bar ) nominal diameter: 13 mm Flow rate max: 25 l/min Pipeline installation, without check valve, with adjusting pin 2x Connection thread: M22 x 1.5 Installation length: 104 mm used, tested ! Dimensions: 104 x 112 x 52 mm
used
Throttle valve, hydraulic valve ORSTA, EINSPRITZGERÄTEWERK AKEN AOS 20 TGL 10962 nominal pressure: 160 kp/cm² ( approx. 160 bar ) nominal diameter: 20 mm Flow rate max: 63 l/min pipe installation, without check valve, with control pin 2x Connection thread: M30 x 2.0 Installation length: 126 mm used, tested ! Dimensions: 126 x 142 x 60 mm
used
Hydraulic cylinder ORSTA C1-40/25x630 TGL 10906 piston diameter: Ø 40 mm rod diameter: Ø 25 mm stroke: 630 mm pivot pin diameter: Ø 25 mm used ! Dimensions: 790 x 100 x 105 mm
used
Mounting shaft MK2 with pump, rotary union for coolant FEIN 6 39 03 070 03 7 for FEIN core drill including hand pump and centering pin New ! Dimensions: 320 x 140 x 80 mm
used
pneumatic cylinder, round cylinder, double-acting CKD CMK2-C-32-30 stroke: 30 mm piston diameter: Ø 32 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, length: 20 mm with pivot pin: M1-TA-30 diameter: Ø 10 mm, length: 12 mm pmax: 0.1 - 1.0 MPa ( 1 - 10 bar ) Mounting thread: M26 x 1.5, length: 15 mm New ! Dimensions: 162 x 64 x 47 mm
used
Pneumatic cylinder with pivot pin FESTO DNGZK-125-500PPVA 34446 stroke: 500 mm rod diameter: Ø 32 mm pmax: 10 bar with approx. 1.5 m hose and sensor cable ! used, checked ! Dimensions: 910 x 210 x 185 mm
used
TRUMPF TruPunch 3000-1300 (S11) punching machine was built in Germany in 2013. The reliable machine with extensive equipment and modern components offers its user unparalleled precision and accuracy in machining both thick and thin sheet metal. In addition to standard punching and marking, the punching machine also allows fast grooving, surface embossing, forming and chipless threading in stainless steel, structural steel and aluminium. On the machine’s sturdy and welded C” shaped structure, sits a specially designed brush table with integrated balls, designed to facilitate the loading and unloading of workpieces. The use of this type of table prevents scratches and nicks from appearing on the surface of the sheet, which results in a significant increase in the quality of the machining. During the entire production process, the sheet is held rigidly by hydraulic clamps fixed to th ...
used
Steel winch, rack and pinion winch, stick winch J.d.n., j. d. NEUHAUS Typ 200 Jumbo Load capacity: 7500 kg ( 7.5 t ) stroke: 180 mm Attachment height: 75 / 385 mm Lifting height: 255 / 565 mm Lifting pin: Ø 55 x 55 mm Attachment surface: 60 / 95 mm Base: 130 x 140 mm used, tested ! Dimensions ( standing ): 270 x 230 x 385 mm
used
3-blade mixing propeller, plastic propeller, marine propeller, stirring propeller PAGUS Ø 225 mm set screw : M16 x 2,0, Length: 35 mm Width across flats: 8 mm Material ( grub pin ): Stainless steel Material ( propeller ): Plastic, PP Material ( gasket ): PTFE New ! Dimensions ( packaging ): 210 x 200 x 105 mm
used
Pressure gauge shut-off valve with clamping socket and threaded pin, 3 pieces PAGUS PN400 Clamping socket: G 1/2 ( inch ) Threaded spigot: G 1/2 ( inch ) Material: Steel New ! Dimensions ( valve ): 125 x 120 x 62 mm Dimensions ( packaging ): 230 x 165 x 115 mm
used
CEE plug, plug, safety plug STAHL 8575/12-306 16 A - 6h 3-pin 220 / 240 V 50 / 60 Hz 2P + PE explosion-proof New ! Dimensions ( Plug ) : 160 x 60 x 62 mm Dimensions ( Packaging ) : 165 x 60 x 65 mm
used
Rotary actuator, hydraulic motor HKS rotary actuators Type: DA-H 125 - 180 Rotation angle 180 Operating pressure max. 210 bar Nominal torque max. approx. 5000 Nm Shaft diameter 70 mm Shaft pin length 140 mm Keyway width in the shaft 20 mm Flange diameter 222 mm Centering diameter 150 mm bolt circle 195 mm Connection thread 1/2 flange with 8 mounting holes 18 mm - 2 pieces screw-in fittings from 1/2 to 16S Overall length housing without drive shaft, without centering edge 384 mm Overall length housing with drive shaft 535 mm Weight 70 kg very good condition - New, unused from stock dissolution; used
used
TELESCOPIC JIG(POST JIG TYPE 1) INNER JIG(80A1900L) -INNER JIG(80A Telescopic Pin jig with bracket. Approximately 2,700 pcs. Size and Diameter; Telescopic Jig: Length - 850mm Diameter - 115mm Inner Jig: Length - 1400mm and 1900mm Diameter - 90mm Please note: This lot is subject to a buyer's surcharge of 10%, VAT might be applicable, and is sold subject to award. Type JIG
used
Manufacturer: Wemhöner Membranenpresse, Year: 1996, Type: KT-VP 28, Number of tables: 1, Automatisches Rüsten: no, Pin-Sytem: no, Heating system: Elektro, Nutzfläche : 2500 X 1300, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10--60, Working widht max mm: 1300, Press length mm: 2500, Pressing width mm: 1350, Kw Heizleistung obere Heizplatte: yes, Max. temperature °C: 220, Foil magazin spaces: 8, Veneer/ foil thickness max mm: möglich, Through running machine: yes, Folienpaternoster: yes, Through running machine: yes, Year :1996
used
Manufacturer: Wemhöner, Year: 1994, Type: Membranepresse, Number of tables: 2, Automatisches Rüsten: no, Pin-Sytem: no, Heating system: Thermoöl, Max.Teilegrösse mm: 3.200 x 1.300, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 3.200, Min.-max. workpiece height in mm: 10 - 50, Membrane: yes, Durchmesser Presskolben: ca 180, Placing table: 2, Membrane: yes, Pressing cylinder: 5, Landing opening mm: 220, Automatische Entleerung: yes, Folienschneidmaschine Hersteller: yes, Folienkalander: 16 Rollen, Foil cutter: 2, Year :1994
used
Manufacturer: Italpresse, Year: 2005, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: 2, Size of heating plate mm: 1450 x 2800, Pin system: no, Multifunktionsrahmen: yes, Automatical glue supply: yes, Year :2005
used
Manufacturer: SCM , Year: ca.1995, Control: hand, Number of profile spindle: 1, Tracer: yes, Max. operating height mm: 50, Spindle travel range total mm: 110, Number of milling spindles: 1, Milling spindle kW: ca.1,5, Milling engine rpm: 10000/20000, Grid depth setting: yes, Tracer pin in the table: yes, Number of tables: 1, Table size in mm: 7700 X 900, FREE TEXT: Tischub per Handrad 200 mm/pneumatisch Fusspedal, Year :ca.1995
used
Manufacturer: Wemhöner, Year: 1997, Type: KTV 28/15 - 165, Work piece width min-max mm: 1500, Min.-max. workpiece length in mm: 2800, Min.-max. workpiece height in mm: 10-40, Max. temperature °C: 90 / 180, Placing table: yes, Through running machine: yes, Pressing cylinder: 6, Pin system: no, Landing opening mm: 1, Foil cutter: yes, Through running machine: yes, Year :1997
used
Manufacturer: Italpresse, Year: 2002, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: yes, Size of heating plate mm: 1450 x 2800, Pressing cylinder: 2, Pin system: yes, Automatical glue supply: yes, Year :2002
used
Stylus holder M&H INPROCESS MESSTECHNIK GmbH MH 21.00-TA-5 flange diameter: Ø 45 / 25 mm bolt circle diameter: Ø 36 mm hole diameter: Ø 4.5 mm 4x bore: Ø 4.1 mm taper diameter ( cable side ): Ø 30 / 24 mm, cone: 45° 5-pin connection cable, Length: 5 m New, with underlays ! Dimensions (packaging): 250 x 170 x 50 mm
used
Photoelectric sensor BALLUFF BOS01E6 BOS 18M-NA-RD20-S4 10 - 30 V DC reach: 600 mm thread: M18 x 1,0 Length: 48 mm 2x nut, wrench width: 24 mm connector connector: M12 x 1, 4-pin Material: Brass, nickel-plated New, with backings ! Dimensions (sensor, without nuts): 75 x 18 x 18 mm Dimensions (packaging): 110 x 100 x 20 mm
used
Photoelectric sensor BALLUFF BOS01EZ BOS 18M-NA-ID20-S4 10 - 30 V DC reach: 800 mm thread: M18 x 1,0 Length: 48 mm 2x nut, wrench width: 24 mm connector connector: M12 x 1, 4-pin Material: Brass, nickel-plated New ! Dimensions (sensor, without nuts): 75 x 18 x 18 mm Dimensions (packaging): 150 x 40 x 20 mm
used
Make : Armfield Capacity : 40 litres Mixing : Silverson Mixer Processing vessel with cooling Usage : Pasteuriser and mixing vesle Model: FT 40 Make : Armfield Model : FT 75 Usage : Crystaliser Pin mixer Single tube Usage : Margarine and ice cream Make : Armfield Model : UHT Usage : UHT Pasteuriser All in excellent condition came out of university in UK
used
TIG hose package, welding torch, hand welding torch, TIG torch -with torch body -Length 6 m -Tuchel connector: 5 pin -Euro plug -Air cooled -Number: 2x hose packages available -Price: per piece -Weight: 5 kg
used
TIG hose package, welding torch, hand welding torch, TIG torch -with torch body -Length: 6 m -Tuchel connector: 5 pin -Dinse connector -Air cooled -Number: 4x hose packages available -Price: per piece -Weight: 5 kg
used
TIG hose package, welding torch, hand welding torch, TIG torch -with torch body -Length: 6 m -Tuchel connector: 5 pin -Air cooled -Number: 2x hose packages available -Price: per piece -Weight: 5 kg
used
CEE plug -4 pin connector -16 A -Type: GHG 531 7406 V 0 -EX protected -Weight: 0.5 kg
used
Tilt bucket, excavator bucket, tilt bucket, ditch cleaning bucket, trench bucket -hydraulically controllable -Total width: 1600 mm -Height inside: 400 mm -Depth: 500 mm -Locating pin: Ø 45 mm -Intermediate dimension: 165 mm -Weight: 200 kg
used
IBS bus terminal -Interbus ST bus terminal: 24 V DC with 8-pin Mini-Combicon connector -consisting of: Terminal part with -screw connection and module electronics -Number: 19x module available -Price per piece -Dimension: 115/45/H115 mm -Weight: 0.2 kg/pc.
used
Valve islands, multi-pin connection, directional valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve island CPV14 -Type: CPV14-GE-DI01-8 CPV14-VI -Valves: Festo 161 3618 pieces -Individual components: see photos -Dimensions: 250/150/H100 mm -Weight: 2.6 kg
used
Valve islands, multi-pin connection, directional valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve island CPV14 -Type: CPV14-GE-DI01-8 CPV14-VI -Valves: Festo 161 361 / 162550 / 162 551 / 161 362 -Individual components: see photos -Dimensions: 280/160/H110 mm -Weight: 1.8 kg
used
TIG hose package, welding torch, hand welding torch, TIG torch -TIG hose package: air-cooled -Length: 5.4 m -Tuchel connector: 5 pin -Weight: 2.7 kg
used
TIG hose package, welding torch, hand welding torch, TIG torch -TIG hose package: air-cooled -Length: 5.2 m -Tuchel connector: 5 pin -Weight: 2.9 kg
used
TIG hose package, welding torch, hand welding torch, TIG torch -TIG hose package: air-cooled -Length: 5.1 m -Tuchel connector: 5 pin -Weight: 2.9 kg
used
Reinforcing steel bending machine, shaft bending machine, round steel bending machine -max bending capacity: Ø 32 mm -Drive: 1.3/2.1 kW -Bending angle: Pin-controlled, two-speed, each with pins for left/right to set the angle -Equipment: adjustable counterholder strips, standard bending tool -Dimensions: 750/660/H970 mm -Weight: 356 kg
used
Earth cable for inert gas device, electrode device, stud welding device -Welding cable: Extension / connecting cable for stud welding device -Length: 25m -Plug: 4-pin -Transport dimension: 570/480/H130 mm -Weight: 17.8 kg
used
Ground cable for inert gas device, electrode device, stud welding device, MIG/MAG hose package -Welding cable: MIG/MAG hose package extension -Length: 30m -Plug: 10 pin -gas hose -Cooling water hoses -Transport dimension: 760/760/H400 mm -Weight: 47 kg