pieces used for sale

Monitors BENQ BL2405 2 pieces, out of order

Tumble dryer 2 pieces, manufacturer and type not visible, in pallet rack, probably exhibition goods

Table shear cutting knife, replacement knife for table shear, replacement cutting, cutting knife, shear knife -Spare knife: for guillotine shears, from stock for guillotine shears Fischer DHS 12/3000 -Quantity: 4 pieces available -Lengths: 2x 2650/100/25 mm / 2x 450/100/25 mm -Hole spacing: 200/250 mm, see photos -Accessories: incl. Box with fastening screws -Price: complete -Weight: 126 kg

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, shaft washer -Manufacturer: INA, bearing washer shaft washer for axial cylindrical roller bearings 20 pcs. unused OVP -Type: WS 811 12 -Carton: with 20 pieces of bearing washers -Quantity: 2 boxes available -Price/Sale: per carton -Carton dimensions: 100/150/H95 mm -Weight: 2.1 kg/piece

Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Width: 730 mm -Extendable to: 1600 mm -Number: 2x covers available -Price: complete for 2 pieces -Dimensions: 1600/730/165 mm -Weight: 34 kg/piece

Tool holder, milling holder, milling tool -Number: 3x SK40 holders -various: versions -Sale: only complete -Weight: 6 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -1x holder: Ø 27x 85 mm -1x holder: Ø 70 x 220 mm -Sale: only complete -Weight: 18 kg

Manufacturer: Keithley Instruments Model No.: 3721 Type: Dual 1×20 multiplexer card Features: 40 two-pole or 20 four-pole channels for general switching 2 dedicated channels for current measurements (up to 3 A) Automatic CJC (Cold Junction Compensation) for temperature measurements Supports 4-wire resistance measurements Switching capacity: Voltage: up to 300 V Current: 2 A switched, 3 A signal carrying capacity Power: 60 W, 125 VA Connector: 2× 50-pin D-Sub Compatible with: Keithley 3706A Mainframe Weight incl. packaging 4kg Auction-ID: A1-45208-1065

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, finishing unit, buffing unit -Manufacturer: Homag, 2 milling units and 2 buffing units from BRANDT KS 25 edgebanding machine -buffing units: motor KMER 0.18 kW 1360 rpm -Polishing roller: Ø 145 mm, height and depth adjustable / swiveling -Milling units: Motor Perske / Homag, see photos of nameplates -Voltage: 220 V / 200 Hz -Price/Fee: complete -Overall dimensions: 1200/800/H590 mm Total weight: 175 kg

Vacuum lifter, vacuum lifting device, vacuum suction device, plate lifter, vacuum lifting frame -Suction surface: Ø 66 mm -Price complete -Quantity: 150 pieces -Dimensions: O 66/29 mm -Weight: 0.03kg / piece

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 32 pieces adapter sleeves -different: sizes and manufacturers -Sale: only as a package

Pharyngeal theory, border pharyngeal theory, double-mouthed -Throat study including: good and reject sides -Measuring range: 3/4/5/6/7/8/9/10/12/14/15/25/53 mm -various manufacturers -List: in the photos -Sale: only complete set -Weight: 4.9 kg

Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube -for: scribing plate, clamping plate -2x prisms: as a set -Price: for one set -Dimensions: 130/75/H150 mm -Weight: 10 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price/Sale: complete -Overall dimensions: 500/560/H670 mm -Weight: 51 kg

Glass scale, glass measuring scale, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display, linear encoder -Length measuring device: from Battenfeld BA-T2400 injection molding machine, 2 pieces -Measuring length: approx. 950 mm -Price/Sale: complete -Dimensions: 1060/35/H85 mm -Weight: 4 kg/pc.

Fixators, leveling units, leveling elements, machine feet, leveling shoes, vibration dampers, spring elements, spring bodies -Manufacturer: Gerb, spring body 3 pieces, for machine tools and systems -Type: D1-81 -Mounting hole: M12 -Load capacity: 4.00-5.04 kN / 408 - 550 kg -Price: complete -Dimensions: 180/120/H110 mm -Weight: 3.5 kg/piece

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal -Manufacturer: Beckhoff, 2 pieces 2-channel digital output terminal -Type: KL 2012 -Nominal voltage: 24 V DC -Price: complete -Dimensions: 12/68/H100 mm -Weight: 0.07 kg/piece

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -Manufacturer: WMW PWS, 17 hob cutters -Hole: Ø 27 mm 4 pieces, Ø 32 mm 7 pieces, Ø 40 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 400/400/H150 mm -Total weight: 52.5 kg

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -Manufacturer: Fette/JAL, 23 hob cutters -Hole: Ø 16 mm 13 pieces, Ø 22 mm 4 pieces, Ø 27 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 250/170/H90 mm -Total weight: 9.8 kg

CNC drawbar, tool holder, tool holder, milling tool holder - Quantity: 28 pieces -with: ring groove -for: SK50 recordings -Thread: M24 - Price: complete -Weight: 6.8 kg

Tool holder, milling holder, milling tool -Number: 8x SK40 holders -1x: Tapping chuck, compensating chuck -35: Mount MK2, compensating chuck -suitable for: tool changer -Sale: only complete -Weight: 58 kg

collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 14 pieces clamping sleeves type ER25 -various sizes: 2-14 mm -Drawing in the pictures -Only sold as a package -Weight: 1 kg

Spline hobs, gear cutters, modular milling cutters, gear hobbing cutters, gear form cutters, modular milling heads, shell end mills, cylindrical milling cutters, milling cutters, hobs, spline hobs -Manufacturer: WMW PWS, 29 hob cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 490/300/H70 mm -Total weight: 30.7 kg

End mill, milling cutter, shank thread milling cutter, thread cutter -Manufacturer: JAL PWS P, 29 pieces shank thread milling cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Various types: see photos -Sizes: see photo parts list -Price/Sale: complete -Dimensions: 240/180/H150 mm -Total weight: 4.2 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, bar gripper, thread cutting head, boring bar holder -Number: 25 pieces turning tools -Take: Ø 30 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/655/H630 mm -Weight: 34 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, driven tool, bar gripper, thread cutting head -Manufacturer: Sandvik, 17 pieces turning tools with tool stand -Socket: Ø 40 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/660/H500 mm -Weight: 25.6 kg

Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Manufacturer: Matrinor, load racks lashing points 4 pieces -Original use: aerospace industry -Payload: 9840 kg -Shackle mount: Ø 120 mm / M42 -Price: complete -Dimensions: 555/252 / H175 mm -Weight: 62 kg / pc.

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 2 pieces, for machine tools and systems -min. height: 86 mm -Max. Height: 91 mm -Price: complete -Dimensions each: 230/110/H86 mm -Weight 6 kg/piece

Lens, lenses -Number: 6x lenses -packed: individually -Dimensions: 110/110/H35 mm -Price: complete for all 6 pieces -is only sold complete -Weight: 0.3 kg/piece

Tool holder, milling holder, milling tool -Number: 4x holder SK40 -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 5 kg

Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Ø 56 x 110 mm -Ø 46 x 130 mm -Ø 52 x 90 mm -Ø 42 x 80 mm -Ø 42 x 55 mm -Ø 32 x 60 mm -End milling cutter -Price/Sale: complete -Total weight: 24 kg

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Leveling elements: 5 pieces, for machine tools and systems -Price/Sale: complete -Dimensions: Ø 220 x 167 mm -Total weight: 34.5 kg

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 32 mm -Price: complete -Dimensions each: 140/140/H32 mm -Weight 2.5 kg/piece

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet, spring elements -Leveling elements: 2 pieces, for machine tools and systems -Construction height: 50 mm -mount: M22 -Price: complete -Dimensions: Ø 219 x 50 mm -Weight: 6.3 kg/piece

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet, spring elements -Leveling elements: 4 pieces, for machine tools and systems -Price: complete -Dimension: Ø 150 x 60 mm -Weight: 2,1 kg/piece

High-current terminal, terminal, series terminal, through terminal, switch-disconnector -Manufacturer: Phoenix Contact -91 pieces: high-current terminals, type PTPOWER 95 -99 pieces: high-current terminals, type PTPOWER 95-PE -290 pieces: high-current terminals type PTPOWER 95 (P) -130 pieces: type EB 2-25/PT -Manufacturer: DILOS -3 pieces: switch disconnector type D/061324-201 -Component: are sold together -Price: complete -Weight including packaging: 130 kg

Stacking boxes, stacking boxes, plastic boxes, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, Euro stacking containers, small load carriers, storage boxes, shelf boxes -6620x Storage bins: various sizes -771x storage bins Dimensions: 550/174/H110 mm -3483x Storage bins Dimensions: 175/135/H110 mm -2112x storage bins Dimensions: 275/175/H110 mm -30x storage boxes dimensions: 138/86/H110 mm -172x storage bins Dimensions: 174/136/H96 mm -56x storage boxes dimensions: 274/174/H96 mm -Sale: only complete

Tool holder, milling tool holder -Number: 13x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set -Weight: 54 kg

Tool holder, milling tool holder -Adapter -Recording: SK50 -Recording tool: 2x MK3 1x MK2 -Drill chuck reducing sleeves spindle tool -Price/Sale: complete -Weight: 9 kg

Tool holder, milling holder, milling tool -Number: 17x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -is only sold complete -Weight: 70 kg

PE pipe electrofusion socket, electrofusion fittings -PE pipe electrofusion fittings -Manufacturer: Wavin/Plasson/Friatec ... -various: designs and quantities -Bends: Ø 90/45°, Ø 63/45°, Ø 63/90°, Ø 32/90° -Reducers: Ø 63/40, Ø 50/40, Ø 40/32 2x -End cap: Ø 32 mm -Price: complete -Total weight: 2.3 kg

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread, lashing point -Hersteller.RUD, Loadbock thread with foldable rotatable load bracket unused Ovp -Type: VLBG 5 t M 30 Ident-No .: 850 08 13 -Carton: content 4 pieces -Quantity: 12 cartons available -Price: per box -Weight: 15 kg / box

Micrometer screws, micrometer screws, tooth width measurement, plate measuring surfaces -Measuring range: 25-200 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -large measuring surfaces -Measuring force: Ratchet -Including case -Adjustable dimensions -Hand protection -Key Other sizes also available -Weight: 5 kg

Respiratory protection filter, pocket filter -WxHxL: 592x490x360 mm: AUT-Pak C86-8 KK: 1 piece -WxHxL: 592x287x360 mm: AUT-Pak C86-8 KK: 1 piece -WxHxL: 592x592x500 mm: AUT-Pak C86-8 KK: 3 pieces -WxHxL: 592x287x500 mm: AUT-Pak C86-8 KK: 1 piece -WxHxL: 287x592x500 mm: AUT-Pak C86-4 KK: 1 piece -WxHxL: 490x592x360 mm: AUT-Pak C86-6: 4 pieces -WxHxL: 592x287x360 mm: C-8T-K: 5 pieces -WxHxL: 592x592x500 mm: AUT-Pak C86-6: 9 pieces -WxHxL: 592x592x600 mm: HTH 76600/6: 4 pieces -WxHxL: 592x287x600 mm: HTH 72600/8: 4 pieces -Price: complete -Number: 33 pieces -Weight: 45 kg

Tool holder, milling tool holder -Number: 9x SK30 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -with transport box -Price/Sale: complete -Weight: 10 kg

Tool holder, milling tool holder -Number: 4x SK40 recording -various versions -Collet: Ø 8/10/12/20 mm -Sale/Price: complete -Weight: 4 kg

Tool holder, milling holder, milling tool -Number: 8x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 32 kg

Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Drill chucks: Surface chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Weight: 24 kg

Tool holder, milling tool holder -Number: 14x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/320/H540 mm -Weight: 58 kg

Tool holder, milling tool holder -Number: 8x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set -Weight: 26 kg