pieces used for sale

Description Item # 7526 – DOUBLE TWIST WRAPPER for comfit pieces, chocolate creams and sweets with solid or soft filling Manufactured by NAGEMA Model EU7 up to 300 pieces per minute, With appropriate parts would be suitable for product sizes 20 to 60mms long x 13 to 27mms wide x 8 to 20mms high,

Used complete technological line for slaughtering pigs with a capacity of 80 pcs/hour The line consists of the following components: DIRTY PART - Feed pass 1.8 mb with spray and blocking - Restrainer box for BO-4AT deafening - Bleeding tub with rollers 4.5 mb - Conveyor mobile bleeding table - Consumable blood collection device UZK - 2 Z - Differential lift for bleeding track - Synchronizer - Three-shaft brush washer - Self-exuding loop lowerer - Self-pulling loop washer - Photo-cell sink - Single station knife sterilizer - Apron rinser - Hanging scaler 80 pcs/hour heated with steam - Loop extractor - Gantry sealer Super B 80 pcs/hour - Bristle conveyor belt 7 mb - Bath under the bristle brushing machine. - Hood over the bristle scalding set - Exponential table for brushing machine with air curtain - Tubular cleaning table - Bath under the  ...

Laveuse de pièces Nr. 37 ist eine Reinigungsanlage, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Angaben zu Durchmessern, Modulen, Längen oder Werkstückmaßen liegen nicht vor. Technische Daten (Drehzahlen, Vorschübe, Stromversorgung, Abmessungen, Gewicht) sind nicht angegeben. Zubehör nicht aufgeführt. Erreicht enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrenindustrie, Maschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

Pilot plant with 3x used Tetra Laval Food - Schroder Kombinator VWK01/60-400 Scraped Surface Heat Exchangers (SSHE) for heating and/or cooling of liquid, viscous, high viscous and crystalline products. 1x used for heating, 1x used for cooling with city water and 1x used for cooling with R22 (Freon). 3x independent motors with mechanical variators for adjusting the speed. Hotwater preparation unit. Stainless steel control panel with relays controls, 3x Ampere meters, Temperature control unit, controls for feedpump and cleaningpump (pumps itself excluded). Cooling compressor (R22 Freon). Power: 380 Volt - 50 Hz - 3 Ph - 31 A. Manual available., Capacity: 20 - 100 kg/h (depending on product / trial specifications), Max. working pressure: Up to 25 bar, Cooling medium: R22 (Freon), Total Power Consumption: 380 Volt - 50 Hz - 3 Ph - 31 A, Dimensions: 240 x 140 x 200 cm, Weight: 1.000 kg

Flange connection, V-flange, pipe coupling, welding reduction, reduction, clapper base, pipe bend, welding bend, pipe angle, support clamp, flange clamp, support clamp -Pipe elbow/support clamps: 11 p. / 82 pcs. -Type: various versions, see photos/parts list -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H200 mm -Weight: 189 kg

used industrial head machine King I-REX T4/3S-1/1-85/9 for sharing and circular action of Teigen. -4 in sequence -Industrial design -Stainless steel clad

Kemper Langwirker-I-L

Kegelrundwirker W&P CR 59 -Bread dough Rundwirker Werner & Pfleiderer -Model CR 59 -with oiling -With Teflon Kegel -with hot air

10,000 pieces of grating gratings for pallet shelves galvanized Insertion grids available in different sizes, mesh widths, support rod and weight load: Negotiation price: from € 5,-- net per piece from stock Price with € 5,-- refers to the insert ingerate with the size 24.5 x 104.5 cm Larger quantities on request! Insertion grid Mesh width 80 x 89 cm 2.5 x 2.5 cm 99.5 x 49.5 cm 3 x 3 cm 99.5 x 99.5 cm 3.5 x 3.5 cm 100.5 x 98.5 cm 4.5 x 1.1 cm 104.5 x 24.5 cm 6.5 x 3 cm 108.5 x 111 cm 6.5 x 6.5 cm 120 x 89.5 cm 7 x 3.5 cm 120 x 109 cm 7 x 4.5 cm 125.5 x 59 cm 7 x 7 cm 128.5 x 81 cm 129 x 118 cm support rod 132.5 x 111 cm 20 mm x 2 mm 134 x 76.5 cm 25 mm x 2 mm 134 x 92 cm 30 mm x 2 mm 134.5 x 99.5 cm 35 mm x 2 mm 134.5 x 122 cm 40 mm x 2 mm 143.5 x 124 cm 45 mm x 2 mm 157.5 x 81 cm 170 x 150 cm 179 x 121 cm Used goods, very good condition, see  ...

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collet sleeves -Clamping sleeves: 6 pieces -Recording: SK50 -Various sizes: 6-32 mm -Sale: only to be sold as a complete set -Box dimensions: 280/220/H155 mm -Weight: 13 kg

Plug, connector, cable socket -Manufacturer: Siemens, connector 11 pieces -Type: AGA67/GDML 2016 GB 1 -Price: complete -Dimensions: 50/30/35 mm -Weight: 0.1 kg/piece

Properties: + Semi-automatic + very good value for money + already as standard: mobile machine, optimal for quick ground wiping + Stainless steel partial knife + coated knife head + even division of the dough + excellent round inges, the dough pieces + ergonomic knife cleaning position (head swivelable 90 degrees forward) + easy and fast adjustment of the chamber height + side bracket for actuator, immediately at hand SERIES equipment: + 3 impact plates included SPECIAL accessories, available at an extra cost: - additional impact plates for DivObun Size 4-30: EUR 93,-- net / Pcs Technical data: Pieces: 30 dough pieces Unit weight: 40 - 120 grams (dough/ product dependent) Dough insert: 1,200 - 3,600 grams (dough/ product dependent) Power: 0.75 kW Connection values: 400V - 3Ph - 50Hz Fuse: 16A-CEE plug Dimensions: 60 x 70 x 152 cm (WxDxH) Height with lever: 2 ...

Tool holder, milling holder, milling tool, cutter head -Take: SK40 3 pieces -Sizes: see pictures -Price: complete -Dimension box: 320/110/H150 mm -Weight: 3.5 kg

Pasta and automatic machine Fortuna head machine KM 4 used Fortuna head machine KM4, 4-row with flour. Easy cleaning of the parts because easily accessible. Capacity up to max. 4800 pieces/hr weight range of the head machine between 35-80 grams. Divide and act of dough as if by hand. Payment and shipping on request. 4-row Weight range 35-80 grams Hourly capacity max. 4800 pcs. Flour spreader mobile on wheels

Tool holder, milling holder, milling tool -Intake: SK50 5 pieces -Sizes: see pictures -Price: complete -Dimensions box: 400/300/H270 mm -Weight: 42.1 kg

Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.

Total lenght 2800mm

Kemper Long Knitter - L analog control with flour spreader Spreader adjustable Speed treadmill adjustable Height of the bands adjustable with CE plug for linking to bread system No separate power connection required on rolls Metrics: Height: 170cm Width: 200cm Depth: 90cm

Cable duct, cable tray, cable channel, cable route, cable profile, protective conduit, protective profile -Cable duct: 61 pieces -Dimensions: 3000 x 50 x 37 mm -Material: Steel, galvanized -Price: complete -Dimensions: 3000/820/H120 mm -Weight: 212 kg

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Caster: Ø 85 x 105 mm, 2 pieces -Inside: Ø approx. 25 mm -Price: complete -Weight: 2 kg/piece

Sinmag conical round knitter with flour spreader - with flour spreader - Cones and gutters with Teflon coating - with stainless steel base - with emergency switch - on swivel castors with parking brake

Kemper Soft-Star dough dividing and warp knitting machine Head machine Kemper Soft-Star 6-row dough part and automatic knitting machine with plastic funnel. The maximum hourly output of the machine is 2400 pieces per row and for our machine a total of 14,400 pieces per hour. The clock frequency is 40 strokes per minute. The operating side is in the direction of travel on the left side. The active range of the active drum is between 50 and 60 grams. - 6 rows - with plastic hopper - with Siemens Touch Panel control - Year of construction 09/2004 Electrical data Operating voltage: 400/230 Volt 50Hz Control voltage: 24 Volt DC Rated current: approx. 4kW

Belt round knitter Kemper SBR-2500 Kemper belt round knitter with 2500mm long belts, with flour spreader.Speed adjustable via pot, machine can be moved on rollers, height adjustable. The machine is visually and technically in good condition, can be visited and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request.

Brake disc -Brake discs: conversion kit -Sprocket: Ø approx 34 mm -Hole circle: Ø 80/M10 -Price: complete -Dimension: Ø 221 x 50 mm -Weight: 3.7 kg/piece

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

Relay, contactor, semiconductor contactor, contactor, coupling relay -Manufacturer: Finder, coupling relay -Type: 38.51.0.240.0060 60 volts -Number: 1 boxes with 10 pieces of relays each -Price: per box -Dimension: 65/90/H80 mm -Weight: 0.3 kg/box

It is a used, reconditioned Fortuna bun press semi-automatic size 3 (30 pieces) for sale. The bun press is in top condition, fully functional and runs very quietly. A new knife rack was installed. The engine was re-mounted and a new main switch was installed. The machine was repainted. The weight range of the machine is 32gr. - 70gr. per piece of dough (30 pieces). If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates (further plates on request). Price on request.

Dough dividing and warp knitting machine WP Rotamat CN 30 pieces -30 pieces -for dividing and rounding doughs -Weight range per dough piece from 30grams to 70grams -Dough insert up to a maximum of 2100gr. -with plastic knife -Dimensions 62x53x140 WxDxH -including 3 knitting plates

SECOND-HAND SANDING MACHINE FOR TURNED PIECES LOCATELLI MOD. ORIENTAL MATIK 1200 - With automatic loader - No. 2 abrasive belts -Brushes - No. 6 spindles - Working length 1200 mm

Transformer, transformer, converter, three-phase autotransformer -2 pieces: three-phase transformers DTST 7.5 -with: additional electronic modules -Primary: 400 V -Power: 5.5 kVA each -Dimensions: total 200/430/H740 mm -Total weight: 164 kg

Dough part and warp knitting machine Kemper semi-automatic BT30 - Type: BT30 30-100g - Size 3 - 30 pieces - 380 volts - 0.55 kW 1.5A 50 Hz - Weight range 30grams to 100 grams - Weight insert 9000 grams to 3000 grams We will be happy to send you further pictures and details on request. You can visit the machine at our company during opening hours or by appointment, a test run with your own is also no problem. The machine is immediately available in the warehouse in Bielefeld.

Tool holder, milling holder, milling tool, cutter head, adapter -Mill holders: SK40 3 pieces, clamping sleeve O 54/16 mm -Sizes: see pictures -Price: complete -Dimensions: 240/180/H70 mm -Weight: 4.8 kg

Set of 5 feed rollers for gathering machine c.p. bourg AE 10/15/30/46 (black) Manufacturer number 9260011, 9260148 Art.: PS5062

Tool holder, milling holder, milling tool, cutter head -Adapter: SK40 M20 2 pieces -Sizes: see pictures -Price: complete -Dimension box: 205/105/H140 mm -Weight: 3 kg

Dividing head, dividing head, gearwheel, gears, lathe -Gears: 8 pieces -Shaft mount: Ø 28 mm -Teeth: 57/78/87/99/104/114/126/130 -Dimensions: see photo parts list -Dimension total. Ø 198 x 143 mm -Weight: 18.9 kg

Fixators, leveling units, leveling elements, machine feet, leveling shoes, vibration dampers, spring elements -Manufacturer: Stop Choc, vibration dampers, 6 pieces, for machine tools and equipment -Type: Ø 129 mm -Installation height: 27 mm -Price/Sale: complete -Total weight: 9 kg

Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Load lifter: 4 pieces, holder Ø 80 mm -Shackle: M24 2 pieces per part -Price: complete -Dimensions: 250/155 / H250 mm -Weight: 36 kg / pc.

Pallet rack, heavy duty rack, high rack, boltless rack, storage rack stand -Storage rack stands: 12 pieces -Depth: 1245 mm -Height: 7x 2520 mm, 4x 2370 mm, 1x 2275 mm -Material: steel, galvanized -Cross struts: not included -Price: complete -Dimensions: 2600/1370/H710 mm -Total weight: 454 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 65/49 mm -Recording: dimensions see photos -Price: complete -Dimensions: 195/400/H220 mm -Weight: 42.7 kg