pieces used for sale

Control Solenoid, Solenoid, 2 pcs HERION, NORGREN Type 0200 42 VAC 50 Hz 15 VA Inner diameter: Ø 13 mm Length: 40 mm New ! Dimensions ( without contacts ): 38 x 30 x 40 mm

Dematic conveyor system Roller conveyors 20370-600-540 RA2369 Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: 1987 Condition: good (used) Conveyor length (NL):20370 mm, 7 elements between 2620 and 3000 mm, Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Roller width (RB): 540 mm Frame height: 140 mm Overall height including motor: 240 Roller pitch: 62.5 Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.7m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Electric data: 380-415 condition: gut Conveying length in mm: 20370 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5 Driven:  ...

Marine diesel piston, diesel engine piston -Piston: Ø 199 mm -Piston height: 265 mm -Piston pin: Ø 75 mm -Distance from center of piston pin to top of piston: 155 mm -Quantity: 2 pieces available -Price: per piece -Weight: 9.025 kg

proximity switch -Ø: 3.6 x 20.5 -stainless -Protection class: IP 67 -Number: 7 pieces -Price: complete -Weight: 70 g

Solid state relays, switchgear, switching components -Manufacturer: Gavazzi -Type: RAM1A69D100 3 pieces mounted on heat sink -Price: complete -Dimensions: 300/200/H80 mm -Weight: 3.3 kg

Machine foot set with side orientation, wedge feet, levelling shoe PAGUS support height: 84 - 90 mm side orientation: 10 mm support surface: 170 x 110 mm weight: 14.25 kg 2 pieces each Dimensions: 260 x 165 x 125 mm

Dematic conveyor system Roller conveyors 19500-600-540 RA2370 Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: 1987 Condition: good (used) Conveyor length (NL): 19500mm, 7 elements between 2620 and 3000 mm, Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Roller width (RB): 540 mm Frame height: 140 mm Overall height including motor: 240 Roller pitch: 62.5 Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.7m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Electric data: 380-415 condition: gut Conveying length in mm: 19500 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5 Driven:  ...

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet, spring elements -Leveling elements: 4 pieces, for machine tools and systems -Price: complete -Dimension: Ø 220 x 105 mm -Weight: 5,5 kg/piece

Module converter, electronic module -Number: 11 electronic modules from Pilz -Module carrier: C-P8-GA-14 -Power supply: C-P8 NT-24 24 V -Price: complete -Dimensions: 480/175/H140 mm -Weight: 4.9 kg

Deep Groove Ball Bearings, DKF 627 ( 10 pieces ) d = Inside = 7 mm D = Outside = 22 mm B = Width = 7 mm Price for 10 pieces ! for larger quantities, please ask for prices Minimum order value 50,- €

It is a used Kemper head machine Quadro-Round for sale. The machine is functional. For the production of rustic, square and round buns. Price on request.

Footplate, site fence foot, barrier foot -9 pieces: TL plastic footplate -Price/fee: complete -Dimensions: 820/420/H110 mm each -Weight 27 kg/piece -Total weight: 246 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -different recordings: 10 -from: WNT-Mastertool -Sale: only complete -Price: complete -Weight: 36 kg

Deep Groove Ball Bearings, DKF 629 ( 10 pieces ) d = Inside = 9 mm D = Outside = 26 mm B = Width = 8 mm Price for 10 pieces ! for larger quantities please ask for prices Minimum order value 50,- €

Unloading plate for cherries 29-20,, Original Ferrum plate,, 50 holes,, outer diameter: 29 mm,, inner diameter: 20 mm,, very good condition.

Tool holder, milling tool holder -Number: 2x SK50 recordings -various: versions -Price/Sale: only complete set -Weight: 12 kg

Connectors, plugs, sensor modules, G2 flat modules -4-pin -Quantity: 10 pieces -Price/Sale: complete -Weight: 0.1 kg

Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Milling tool holders: 8 pieces MK4 tool holder -Sizes: see pictures -Price: complete -Box dimensions: 630/330/H60 mm -Weight: 20.5 kg

Deep groove ball bearings, DKF 6302 Z ( 10 pieces ) d = Inside = 15 mm D = Outside = 42 mm B = Width = 13 mm Price for 10 pieces ! for larger quantities please ask for prices Minimum order value 50,- €

Stüer conveyor system Roller conveyors 16950-620-600 RA2456 Further information Manufacturer: Stüer Type: Roller conveyor Condition: good (used) Conveyor length (NL): 16950 mm, 6 elements between 1700 and 4200 mm, Roller width (RB): 600 mm Nominal/outer width (NB): 620 mm Frame height: 140 mm Overall height including motor: 240 mm Roller pitch: 75 mm Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.5 m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: gut Conveying length in mm: 16950 Nominal / outside width in mm: 620 Roll width in mm: 600 Roll division in mm: 75 Driven: YES scope of delivery: mit Motor, without supports and side guides Für e ...

Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, mounting bracket -Milling tool holders: 10 pieces MK5 mounting boring heads/reducing sleeves/spindle tools/mounting holders -Sizes: see pictures -Price/Sale: complete -Overall dimensions: 670/470/H80 mm -Total weight: 41.7 kg

Deep Groove Ball Bearings, DKF 6202 ( 10 pieces ) d = Inside = 15 mm D = Outside = 35 mm B = Width = 11 mm Price for 10 pieces ! for larger quantities please ask for prices Minimum order value 50,- €

Stüer conveyor system Roller conveyors 15890-620-600 RA2457 Further information Manufacturer: Stüer Type: Roller conveyor Condition: good (used) Conveyor length (NL): 15890 mm, 3 elements Roller width (RB): 600 mm Nominal/outer width (NB): 620 mm Frame height: 140 mm Overall height including motor: 240 mm Roller pitch: 75 mm Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.5 m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: gut Conveying length in mm: 15890 Nominal / outside width in mm: 620 Roll width in mm: 600 Roll division in mm: 75 Driven: YES scope of delivery: mit Motor, without supports and side guides Für eine individuelle, fachmän ...

Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different recording sizes: see pictures -Sale: only complete -Weight: 12 kg

Thyristor -Type: S6070W -Price: complete -Number: 3x 250 pieces -Dimensions: 175/130/H215 mm per package

Thyristor -Type: S6070W -Price: complete -Number: 250 pieces -Dimensions: 175/130/H215 mm -Weight: 1.3 kg

Deep Groove Ball Bearings, DKF 6202 Z ( 10 pieces ) d = Inside = 15 mm D = Outside = 35 mm B = Width = 11 mm Price for 10 pieces ! for larger quantities, please ask for prices Minimum order value 50,- €

3 pcs proportional valves + control unit, R900948284 + VT-HNC100-2…, Rexroth, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - The parts were removed from die-casting machines. The scope of delivery consists of: 3 used Rexroth proportional valves. It is possible that the valves function without any problems or that some may require refurbishment. The current market price of the new valve is approximately € 20,000. Our selling price is € 490 per unit. 1 used Rexroth control unit VT-HNC100-2-30/P-I-00/000. These control units are no longer available on the market, but are necessary for these valves. Our selling price is € 990. Applies to both items. Sale ...

Deep groove ball bearings, DKF 6202 ( 10 pieces ) d = Inside = 15 mm D = Outside = 32 mm B = Width = 9 mm Price for 10 pieces ! for larger quantities, please ask for prices Minimum order value 50,- €

Set of 70 bearing housings and roller bearings, SKF, SNR, INA… , mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An exceptional special price of € 6 per item, excluding VAT. The original price is at least 10 to 15 times higher. We can divide the bearings into 3 groups: 1) Approx. 44 pieces in original cardboard packaging 2) Approx. 15 pieces in original foil packaging 3) Approx. 11 pieces open, unused, fully functional bearings. See stock list on photo. Minor defects of 1-2% possible. These are brand-name products only. Due to the extremely low package price, we cannot offer any guarantee/warranty in this case. For these goods, we must exclude the buyer's war ...

Thyristor -Type: S8070W -Price: complete -Number: approx. 250 pieces -Dimensions: 175/130/H215 mm

used Fortuna head machine KM6, 6 rows with Mehler. Easy cleaning of the parts because it is easily accessible. Capacity up to max. 4800 pieces/hour Weight range of the head machine between 35-80 grams. Dividing and shaping doughs as if by hand. Trade-in and shipping on request. -Stainless steel - 6 rows - Weight range 35-80 grams - Flour shakers

Lot of approx. 265 small roller bearings, SKF, FAG, INA, , mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An absolute special price of € 0.7/piece excluding VAT. The total original price is at least 7 to 10 times higher. We can divide the bearings into 3 groups: 1) Approx. 225 pieces in cardboard or foil original packaging, including one item with 50 pieces (various SKF items such as minimal bearings, seal sets, etc.). Many bearings are from a large package where the individual bearings are not packaged. 2) Approx. 40 open, unused, fully functional bearing units. See bearing list on photo. Minor erro ...

Dough dividing machine Kemper Imperator II-MB Kemper Imperator dough divider weigher with stainless steel hopper. The machine is in good visual and technical condition and can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - Dough weigher Kemper - Model: Imperator II-MB - Year of construction 2007

Cross support, cross support, cross table, cross sliding table, cover plate -Manufacturer: Kunzmann, 2 pcs. Cover plates from milling machine type UFV 600 -Price/Sale: complete -Dimensions each: 263/161/H38 mm -Weight: 9.7 kg

Tool holder, milling holder, milling tool -Number: 7x SK40 mounts with tool carrier -Executions: different -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Dimensions: 590/120/H210 mm -Weight: 12 kg

Demolition hammer, chisel hammer, Bosch hammer, mortising hammer -Length: 450 mm -Price: complete -Number: 4 pieces -Dimensions: 450/17/H17 mm -Weight: 0.8 kg/piece

4 pieces of adjustable jaws INGERSOLL for face plateChuck jaws for lathe chuck, mechanical clamping device, clamping blockNo: 39.02.10000 / 501.397Jaw width 70 mmJaw length 180 mmJaw carrier height 150 mmBase plate 325 x 265 mm- Step jaws for turning as rotary and drilling jaws- Jaw adjustment via trapezoidal threaded spindle- Jaw support with 6 recesses 40 x 30 mm for fastening- Distance between recesses 280 x 133 and 220 x 90 mm (center)Dimensions L x W x H 325 x 265 x 215 mmWeight per jaw 36.5

Demolition hammer, chisel hammer, Bosch hammer, caulking hammer -Length: 570 mm -Price/Sale: complete -Quantity: 2 pieces -Dimensions: 570/21/H21 mm -Weight: 2.6 kg

Cable protection ring -Design: extra long -EWEM / XL: 4 x 35 - 150 mm² -Number: 2 pieces -Price: complete -Dimension: Ø 62 x 220 mm -Weight: 0.1 kg/piece

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/16011 piece Punching bracket, punching unit for press brakeYear of construction approx. 1990Throat: 160 mmPunching capacity: 0.3 to 5 mm Material thicknessHole diameter: 2 to 7 mmInstallation height: 203 mm (only the punching bracket individually with punching tool)Installed is a round hole tool ø 5 mmPunching bracket distance: 195 mm- the tool unit was mounted on a hydraulic press brakeDimensions punching bracket base plate L x W x H: 2500 x 345 x 37.5 mmDimensions of punching bracket printing plate L x W x H: 2500 x 173 x

4 pieces damping elements BILZMachine feet, oscillating elementsType Faebi 430 HDBeload 27500-65000 NBload 2750-6500 kgWorking height: 95 mmBase plate: 500 x 500 mm x 10 mmSupport diameter: 315 mmNominal diameter 480 mmAir pressure: max. 6 bar- Fastening thread M20 in the center of the damper- Damper with two-chamber systemvery good conditionIdeal for press, punching machine or punching nibbling machines.Weight per piece: 53 kggood condition; used

Demolition hammer, chisel hammer, Bosch hammer, mortising hammer -Length: 290 mm -Hexagon -Price: complete -Number: 4 pieces -Dimensions: Ø 19 x 290 mm -Weight: 0.5 kg/piece

Demolition hammer, chisel hammer, Bosch hammer, caulking hammer -Length: 390 mm -Price/Sale: complete -Quantity: 3 pieces -Dimensions: 390/21/H21 mm -Weight: 0.8 kg/piece

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack -Height adjustable: 590 - 645 mm -Number: 3x feet available -Price: complete -Dimensions: Ø 410/H600 mm -Weight: 93 kg/piece

Heating cartridge -Diameter: 10 mm -Length: 226 mm -Volt: 230 V. -Watt: 230 W -Number: 2 pieces -Price: complete -Weight: 0.15kg

8 pieces - Tugger train Tow tractor STILL - Electric tow tractor STILL Type CX TLogistic train Towing vehicles, tugger train for logistics trains Year of construction all around 2010 or laterBatteries from 2010 to 2017Plus a chargerScope of delivery for the offer price:8 pieces Electric tow tractor STILL type CX Each tractor has a battery installed.1 piece chargerAll devices workA battery is defective, so a device does not work. Technical data:Tensile load: max. 4000 kgNominal drive power: 3 kWBatteria voltage: 24

Channel folding machine, folding machine, folding former, seam locking machine, folding former, sheet metal bending machine, profiling machine -Number: 14 pieces rolls -various: versions -Recording: Ø 28 mm -Price: complete -Weight: 22.5 kg

Transport rollers, wheels, casters, carrying rollers -Rubber-coated drive rollers, various designs -Roller diameter: 145 mm -Hole: Ø 20 mm -Roles: 11 -Price: complete -Design/Quantity: see photo -Total weight: 10.2 kg