pharmaceutical machines used for sale

MARTIN T90 Year of construction 1996 Nominal current: 64 A max. planing width: 260 mm max. planing height: 160 mm 5 spindles: 4x Tersa planer head + 1x universal spindle Spindle arrangement: Bottom – Right – Left – Top – Universal Spindle 1 – 4: 4 knife shaft – Tersa Use of profile knives for chamfers and radii possible (spindle R + L + O) Spindle 5: Universal 40 mm spindle (max. tool diameter: 220 mm) swivel (- 45° / + 90°) Bottom: 5.5 kW Left+Right: 5.5 kW Top: 5.5 kW Universal: 7.5 kW Feed speed: 4 – 25 m/min. (infinitely variable) electronic positioning control (storage of up to 100 pairs of dimensions possible) Engine brake Central lubrication Extras: Universal spindle Table extension at the spout Hold-down device for joining shaft right incl. 8 new rubber pull-out rollers Suction connection: 250 + 160 mm Dimensions: L: 524.5 cm W: ...

Automatic labeller for the application of self-adhesive vignettes and tamper evident seals. Balcony design. Capacity: up to 180 pcs/min. The machine is equipped with: - PLC SIEMENS, type S7-300. - HMI PC SIEMENS IPC 677 - Dopple REAJET printing system, type HRpro with camera control system - Preparation for Vision System LAETUS WT Commandor - Carton Transport Belt: pitch 250 mm - Various control systems for label presence with ejection etc.

A used spiral kneading machine Kemper SP 125 L is currently for sale and immediately available in our warehouse in Bielefeld. Spiral kneading machine Kemper SP 125 L - Stainless steel boiler - Stainless steel spiral - 2 x automatic timers - 2 x slow and fast speeds - with flour dust cover - for 125 kg of flour or 200 kg of dough The machine can be inspected and tested in our warehouse. Shipping and trade-in as well as further information and pictures on request.

Snowblower Westa Demonstration unit Hydraulic drive 3 point mount - hydraulically swivelling Pipe Hydraulic Adjustment Weight 615 kg Bolt bottom 28 mm Bolt top 25 mm

Brake boring device Hunger 6.5 A 400 V System Brake drum & disc with accessories Grinding spindle Safety grilles

Horizontal milling machine Reckermann EW 900 Pony TNC 135 380 V 32 A 12,35 KW X 720 mm Y 370 mm Z 350 mm ISO 40 Weight 4 tons Vogel central lubrication Grooves 18 mm Speed range 40 - 2000 rpm Feed in all axes Data

Universal milling machine Speed 90 - 2000 rpm x 650 mm Y 300 mm Z 400 mm Feed rate in x electric Coolant pump Accessories Weight 1 ton

MBO T 460 folding machine; good condition; cleaned and tested; new folding rollers; new warehouses; new straps; 4 folding pockets; shed display; .max. Format 46x66cm;, min.15x17cm; MS control; knife shafts; Flat stack feeder. Folding machine MBO T 460; good condition; cleaned and checked; new rollers; new bearings; new belts; four pockets; stream delivery; max.size 46x66cm, min.15x17cm; MS counter; slitter shaft rollers; Folding Pile Feeder.

Manufacturer | Manufacturer: Chemnitzer Maschinenbau GmbH Chemnitz Type | Type: CMB 16 Pinole Lift | Quill stroke: 120 mm Speed (infinitely variable) | speed (stepless): 460 - 1840 rpm ; 140 - 560 rpm Dimensions table | Table dimensions: 280 x 360 mm Adjustment range table | Adjustment travel table: 540 mm Recording | Holder: MK 2 Connected load | Connection Value: 0.8 kW Total weight | Total Weight: 350 kg

CATALOGUE NO. 6943 TECHNICAL SPECIFICATIONS - loading hopper inlet 1600x1500mm - rotor working width 1500mm - main engine 45kW - pump motor 5,5kW - number of knives 44pcs - knife size 50x50mm - sieve 59mm - pressure drawer - autorewers - dimensions length / width / height 3430x2800x2850mm - weight about 9000kg ADVANTAGES – French production - new knives put on – autorewers – pressure drawer – very good condition – used chipper Net price: 189900 PLN Net price: 42200 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

Radial drilling machine, used Manufacturer: KOVOSVIT Type: VO 50 Year built:1999 Projection: 1600 mm Drilling capacity: 60 mm Quill stroke 310 mm Table / footprint 1470 x 986 mm Weight: approx. 5 t

horizontal slotting machine / high-speed planer Manafacture: Klopp Model: 550 Year of construction: 1982 Planer length: 550mm Weight: approx. 1250 kg

Lathe Manufacturer: Schaerer Model: UN 200 Center distance: 1600mm

Sharpening machine for band saw blades Manafacture: Alber Sharpening machine for band saw blades Sharpening circuit Fabr. Alber Model: TB1 - AE2 Year of construction: 1978

Nock C460 Meat derinder Serial: 1956290 Stainless, cutting width 430mm, cutting speed 19m/min, with 10 spare brand new blades, 0.75Kw, mobile, 3Ph

DEA GLOBAL S 07.05.05 coordinate measuring machine was manufactured in Italy in 2004. The machine performs fast and highly accurate measurements of workpieces with complex shapes using the contact or non-contact method, represented as a set of coordinate points. The excellent quality and precision of the process is guaranteed thanks to the mounted in the DEA GLOBAL S 07 05 05 CMM machine an indexable RENISHAW PH10MQ measuring head with a RENISHAW SP25M scanning probe, performing measurements in the X,Y,Z axes with feeds of 700 mm (X axis), 500 mm (Y axis) and 500 mm (Z axis). The DEA GLOBAL Status 07.05.05 measuring machine is also equipped with the highly advanced metrology software PC-DMIS 2019 R1, performing detailed geometric measurements. Technical specifications of the DEA GLOBAL S 07.05.05 measuring machine - maximum permissible error of length measurement MPEe: ± 2.3 + 3L/10 ...

mandrel bending machine Tansfluid DB 628 Year of construction: year 1995 Drive power Drive power 1.5 kW Drive drive hydraulic cylinder & roller chain Pipe range bending type 4-28 mm Bending angle bending angle 190° (without tube) Bending radius bending radius 1.5 x D – 2.0 x D Nominal pressure nominal pressure 250 bar Operating pressure 3095 mm n. right. Flow rate delivery rate 4.5 l/min

used thermoforming machine TYPE Powerpak NT 420 year 2011 for sale Machine was taken out of production - ran to the last. Foil width 420 VZ 590 mm Price on request

Bundle clamping device manual

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2008 21.7g 96cav mold Expected delivery July2023 Can be inspected and seen in production

Diosna spiral mixer SP 160 AD/T 2 vats extendable - Extendable spiral mixer - for max. 160kg dough or .max. 100kg flour - with 2 timers - Automatic switch-on and switch-off via clocks - Flour dust cover made of stainless steel - 2 speeds - Boiler locking via pliers operated with hydraulics - Tub capacity 260 litres - robust and strong

Dough part and warp knitting machine Kemper semi-automatic BT30 - Type: BT30 30-100g - Size 3 - 30 pieces - 380 volts - 0.55 kW 1.5A 50 Hz - Weight range 30grams to 100 grams - Weight insert 9000 grams to 3000 grams We will be happy to send you further pictures and details on request. You can visit the machine at our company during opening hours or by appointment, a test run with your own is also no problem. The machine is immediately available in the warehouse in Bielefeld.

HUSKY HPETL230E-RSE95D-95 + 48 CAV HOT RUNNER + AUX inc CHILLER DEC 2015 Mold: INCLUDED (HUSKY) ATTENTION NO COLD HALF INCLUDED Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FAST DELIVERY LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2010 Expected delivery July2023 Can be inspected and seen in production

Arburg April 2014 model 920H 5000-4600 500 ton Can be inspected and seen in production

thread dia.: M5 - M24 metrisch : max. 200 U/min. working area: max. 1200 mm engine output: 1,2 kW weight: 25 kg dimensions: 740 x 800 x 400 mm Electric tapping machines for M5 - M24 threads, Angle adjustable. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Options: Clamping table with grooves Type: FL-WB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bandsäge Karl Müller Cutting width 70 cm Cooling 2 cutting speeds Weight 400 kg Length 2 m Width 0.80 m Height 1.20 m

Universal milling machine UF20 LVQE Table Y 320 mm X 1200 mm Z 800 mm Table length 1.55 m Speeds: 45 - 2000 rpm 16 A 380 V Length 1.30 m Width 1.20 m Height 1.90 m Swivel head Coolant pump Feed Accessories

Horizontal milling machine Table length 65 cm x 400 mm y 120 mm Z 300 mm Length 1.20 m Width 1 m Height 1.60 m Vice

Lathe Speeds: 40 - 2000 rpm Tension - lead screw Distance between centers 1 m Center height 230 mm Length 2.50 m Width 1.20 m Height 1.60 m Multifix B recording Accessories Machine unchecked

Box column drill Alzstar 40S 16 A 380 V Speed 160 - 2250 rpm Length 1 m Width 0.80 m Height 1.80 m Weight 270 kg Work lamp Color: White

In-line drilling machine Height adjustable 3150 - 18 000 rpm Year of manufacture 1960 1600 - 9000 rpm BJ 1665 Chuck 0 -6 mm Chuck 0 - 4 mm 16 A 380 V

Roller bench Material thickness 1 mm Usable length 1,275 m Weight 200 kg

Standard, 2 drilling heads

1 drilling head

Standard, 2 drilling heads

Size: 570 x 330 x 60 mm, speed: 1.600 c/h, 8 clamps, hotmelt spine gluing unit, hotmelt side gluing unit, milling and roughening station, cover station, pressing station, delivery

SPECIFICATIONS: Workspace: Maximum width: 1600 mm Minimum length: 550 mm Working height: min. 10 mm - may. 120 mm PLC control COMPOSITION: I. Group: 02 Side brushes with automatic adjustment II. Group: 01 Transverse rotation brush (immersion brush) III. Group: 03 Interchangeable heads with disc brushes or brushes IV. Group: 02 edge strip heads V. Group: 03 Interchangeable heads with disc brushes or brushes VI. Group: 01 Transverse rotation brush (immersion brush) EQUIPMENT: 01 Motorized transport carpet: 2200 x 1600 mm 01 Self-cleaning motorized unloading belt (conveyor belt) 2500 x 1600 mm

Lid FP4A Id No. 2284-0242 CNC 2301 control x 560 y 500 Z 450 Weight 2.2 t Hydraulic Data Machine has a malfunction in the startup procedure !

Gear milling machine Micron 106 16 A 380 V

STIGAL DYNAMIC SPEED HQ plasma cutting machine manufactured in 2012, precisely cuts workpieces made of plain steel, stainless steel and aluminium on a large work table with dimensions (L x W) of 4000 x 2000 mm (the table grate will be replaced with a new one before sale). The numerically-controlled plasma cutting machine ensures a high degree of operational safety, as the machine is equipped with an extraction table designed to eliminate the contamination generated during cutting. The plasma cutting machine is also equipped with a reliable CEBORA PROF 165 HQC plasma source and GudePol GO-R refrigeration dryer. Technical data of the plasma cutting machine STIGAL DYNAMIC SPEED HQ - work table surface (L x W): 4000 x 2000 mm - cutting length: 4000 mm - cutting width: 2000 mm - maximum sheet thickness: 20 mm - plasma source power: 120 A - power consumption: 7000 W - DYNAMIC SPEED H ...

Weibert W7-32 5-fold station wagon Planer width: 320mm Cutting length 1700mm Milling stop for tool max. D=220mm 3 motors 3kW Price 5967,-€ excl. VAT Price 7100,-€ incl. VAT

Weibert W7-32 Profi 5-fold station wagon Planer width: 320mm Cutting length 2100mm Milling stop for tool max. D=220mm 3 motors 3kW Price 6975,-€ excl. VAT Price 8300,-€ with VAT.

Many of our machines are available from stock. Call us to find out more. Fiber Laser Cutter FLV-3015-OE 3kW / VF1530-3000W Technical parameters - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable positioning accuracy of X and Y axes: ±0.03 mm - Maximum speed: 60000 mm/min - Maximum acceleration: 0.7 G - Maximum load: 1200 kg - Power: 3.0 kW - Power requirement: 24.0 kW - Source brand: MAX Photonics - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Cutting thickness - Black steel: recommended thickness 20.0 mm, maximum thickness 22.0 mm - Stainless steel: recommended thickness 8.0 mm, maximum thickness 10.0 mm - Aluminum: recommended thickness 6.0 mm, maximum thickness 8.0 mm - Brass: recommended thickness 5.0 mm, maximum thickness 6.0 mm Construction - Construction type: welded - Number of support legs: 8 - ...

Weibert W7-32 Top 5-fold station wagon Planer width: 320mm Cutting length 2600mm Milling stop for tool max. D=220mm 3 motors 3kW Price 7984,-€ excl. VAT Price 9500,-€ with VAT.

ESAB EAGLE 2000 plasma cutting machine was built in 2009 in Germany. The machine is designed for machining stainless steel, structural steel, low-alloy steel and aluminium with a maximum thickness of 30 mm and has a very stable and vibration-free welded construction. Excellent cutting precision with simultaneous low operating costs is ensured by the ESAB Precision Plasmarc 201 plasma source with a power of 200 A, which generates a narrow plasma beam with high energy density per small area of material. The plasma cutting machine portal was fixed by two dynamic servo drives operating with low backlash on the machined profile rails (X axis). The dynamic servo drive in the transverse carriage drives the spur gear, which then meshes with the toothed bar of the machine portal, causing transverse movement (Y axis). The plasma cutting machine is equipped with an ESAB CNC control with the late ...

Batch mixer dough kneading machine extendable WP UC 80 A Spiral mixer Batch mixer W&P UC 80 A - Manufacturer: Werner & Pfleiderer - Type: UC 80 A - suitable for soft dough - with stainless steel spiral tool - with 2 stainless steel shells - with 2 automatic timers - slow and fast at 2 speeds - with flour dust cover - 380 volts 50 Hz

In 2001 we acquired the license and production rights of Strausak. These rights include the entire 57 U / W conventional series as well as the CNC machines of the type U / W CNC in the tool grinding range 3 G / 4 G / 5 G as well as in the universal cylindrical grinding area, the 2 axes / 3 axes and 4 axes CNC machine and special machines 81 CNC. We have an extensive stock of spare parts. Our specialization is the general overhaul of these machines, as well as the new production of the above-mentioned machine types and the production of special machines.

Seam closer Schechtel MS Manual Length 1 m

Clamping claw box made of solid steel GR 9 (new) 4 pieces