pfauter p 400 used for sale

Working width: 630 mm Working height: 3,300 mm Motor output: 7,5 kW Number of knives: 4 St. Feed speed: 7 + 14 m/min. loading dimensions L x W x H: 1070 x 1200 x 1060 mm weight: 1050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 410 mm Length of the planing table: 2850 mm Number of knives: 4 (Tersa) St. Motor output: 5,5 kW loading dimensions L x W x H: 2950 x 1260 mm weight: 870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Attachment: eccentric screw pump Manufacturer: Allweiler Type: On BP 6.2 E21 P01 Machine number: 7612455 Year of construction: 1998 Performance: 1.67 8.3 l / h Speed: 120-600 1 / min Engine: Nord, type SK Voltage: 400 V Length: approx. 900 mm Condition: used, ready

Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.

Keyboard for Maho machines Philips 432/9. Please note: Board and pot are not included in the offer; New

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

; ready for operation

; ready for operation

Rotary vane vacuum pump oel circulation lubricated Manufacturer: Pfeiffer Type: UN 1001 SW Number: PK D00 131 Status: Used (On request, a general ization is possible) suction digesters: approx. 1000 m3/h final pressure: Small 20 mbar (98% vacuum) cleaner: mineraloil Cooling: water cooling Delivery time: ex stock; ready for use

; ready for operation

3D-SYSTEMS ProJet 660 Pro 3D Printer Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. This means that even large models can be produced without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one printing process. 3D color printers with tremendous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. As a result, even with complex and detailed printouts, these 3D printers do not require dedicated support structures. The non-solidified powder supports the components during printing and is then recycled semi-automatically. Applications Communication of form and design, installation analyses, first fun ...

Eos EOSINT Here we offer an Eos EOSINT plastic laser sintering system. The following things are included with the EOS P380 system Installation space containers Powder containers Overflow container Cooler: Termo TEK Termochiller Type: P411-12448-1 3DM 8 zones process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Sannung 3/N/PE/ 400V AC Frequency 50 Hz Current value 8 kW Fuse 32 A MAX Power Laser 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t

Rotary vane vacuum pump Two-stage oel lubricated Manufacturer: Pfeiffer Type: DUO 250 Cat.-No.: PK D27 602 / K141 Status: Used (functional!) (A general recovery is offered) suction power: approx. 250 m3/h Endduck: > 5x10e-3 mbar Performance: 12 months (in case of general recovery) Including: user manual and oil Delivery time: ex works ; ready for use

Pneumatically operated. Diameter: 180 mm 200 mm 220 mm 250 mm

PLC for Desma presses

Rotary vane vacuum pump manufacturer: Pfeiffer Type: BA251 Status: Generalueberholt Gewaehrl: 12 months Zubehoer: User manual equipment: mineral oil or by arrangement suction power: 250 m3/h end pressure with gasb.: approx.: <5x10e-1 hPa (mbar) delivery time: approx. 1-3 weeks and more Delivery: ex works; ready for use

We offer you here a used pallet rack stand of the Manufacturer Polypal for sale. Technical data for the pallet rack stand: Shelving system: Polypal Type: Stockpal Included in delivery are: 01x pallet rack stand, used Material color: sendzimir galvanized Profile abm.: 85 x 63 x 2,00 mm Profile Type: SKMO5220P Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 1,800 mm high 1,100 mm deep General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

DYNAJET 500th HELI Blue Performance INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. Construction: • 1-axle chassis for easy manoeuvring • Self-supporting and indestructible framework for weight optimization • Central crane eyelet for optimal transport in hard-to-reach places • Frame in dip painting technology for high corrosion protection and hi ...

Dynajet 500mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 500mg with up to 500 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...

ynajet 350mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 350mg with up to 350 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery  ...

Turbomolecular pump Manufacturer: Pfeiffer Type: TPU 2000S Status: Used Nr.: PMP01141/9007 A 12-month service is possible; ready for use

Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 1000 suction moulds: approx. 1000 m3/h Status: As new in original packaging Gewaehrleitung: 12 months from delivery Zubehoer: User Manual; Spare parts list Further accessories by arrangement; ready for use

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm Max 700 x 2,500 mm

unicraft Generator PG 800 TRA Product Name: Synchronous Generator Type: PG 800 TRA Manufacturer: unicraft Item number: 6701083 Year of construction: 2021 Condition: New technical details drive: - Drive motor: Honda GX390 - Starter: Hand start (wire rope hoist) - Fuel type: Petrol - Tank capacity: 11 liters - Consumption at 75% load: 2.2 l/h - Sound pressure level (Lp): 72 dB(A) - Sound power level (Lw): 97 dB(A) technical details power generators: - Type: nsm-ZR100-SC Synchronous - Rated voltage: 230 / 400 V - Apparent power at LTP: 5500 / 8300 VA - Active power at LTP: 4.9 / 6.6 kW - Apparent power at COP: 4100 / 7000 VA - Active power at COP: 3.7 / 5.6 kW - Protection class of the generator: IP 23 - Sockets: 1 x 230 V Schuko, 16 A / 1 x 400 V, 16 A - Protection class of the sockets: IP 44 - short-term power up to 3 times the rated power possible (LTP = ...

Plate bender Heidelberg, fit\'s from size 52 up to 105, max. plate lenght 811 mm; Ready for operation

Hot and cold water high-pressure cleaner Working pressure: infinitely variable up to 500 bar Maximum requirement quantity: 14-30l /min Pump:3-Plunger,All-Ceramic Engine: Hatz,3-cylinder diesel (water-throated) Motor power:42kW Speed motor/pump: 2,350 /1,450 rpm Pump drive:V-belts Fuel consumption:approx. 5.3 l/h Volume fuel tanks:70l/105 l Volume water tank: 1000 l Pressure outlet:(water): M241.5 IG Heating capacity olburner: 291 kW (ca 95 °C) Consumption olburner: approx. 9.1 l/h Construction: self-supporting frame on frame with forklift pockets Empty weight: approx. 1,450 kg Mass: (LWH) 220+147177 Ground open (LWH) 307147246 Article no.: 1 491 030

We offer: New Tetra Pak ® spare parts for TBA 8, PT 8, TBA 21, PT 21, TCBP 70, TCAP 21, 75 ... -> In the list that we send to you on request. you will usually find new spare parts for Tetra Pak ® machines such as TBA 8 PT 8 TBA 21 PT 21 TBA 19 (mainly volume flaps for TPA330SQ) TCBP 70 TCAP 47 (little) TCAP 21 (little) TCAP 75 (little) ... Intermediate sale reserved Prices on request

Tetra Pak ® spare parts We can offer new or used Tetra Pak ® spare parts, -> We send you our list on request See list which we send on request to you

I sell a stacking / destacking system MEINERT (IMA Group) P620 E/S - 2500 / 1300 system, year of construction 2011. Stacking system One-sided steering / also suitable for pallets. Vacuum system (with pump) Rotazion head Automatic charging. Entrance table motorized roller system Exit table on the floor with lifting mechanism motorized roller system Exit table front roller system Entry of feeding roller stazion for stilted material. Security fence fully complete ! Working capacity Approx. 16 cycles / min Plate height 10 - 50mm Min. plate dimensions 250 x 320 mm plate dimensions 1300 x 3000 mm Combined area L.10200mm x W.8700mm Combined power 45kW Year of construction 2011 Available the same. Ready for use, possible to check. With CE certificate and full document.

Single-chamber vacuum packaging machine - model PlusVac 21 Main characteristics: – Completely stainless; – Automatic lid opening; – Floor model; – Equipped with a highly efficient Bush vacuum pump with a capacity of 21m³/h; – External dimensions: W 480 x L 655 x H 975 mm. (1550mm. with open lid); – El. connection: 1.1kW, 3Ph, 400V, 50Hz; – Weight 65 kg; – Camera size: W 430 x L 505 x H 175 mm; – Maximum dimensions of a bag: 400 x 500 mm; – Sealing length: 1 x 405 mm. in front; – Double sealing seam; – Control Comfort; Options /not included in the price/: – Gas injection; – Additional sealing at the back; – Sealing with cutting; – Additional sealing at the back, with gas – Vacuum pump 40m³/h – Vacuum pump 60m³/h. 1 year warranty Categories: Packaging in envelopes , Packaging technolog ...

Infrared camera system FLIR ThermaCAM P60 PAL To detect, collect, analyze and document of thermal conditions in industrial and automotive technology needed from business, built in 2004, little used, has in the meantime been calibrated with documentation

Angle gearbox Bondioli Pavesi type 2061 Used gear brands make "Bondioli Pavesi", i = 1 : 1.93 for up to 59 kw input power at 1,000 1/min. With mounting plate with oblong holes, with or without 4-grooved pulley and Taperlock for sale.

Washing machine Pero3/u (2 tank) with odolejaczem

Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 500 A Suction moulds: approx. 500 m3/h Cat. Nr.: PP W31 001 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, operating instructions; ready to use

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

Waelz piston pump (rootsblowesis) Manufacturer: Pfeiffer Type: WKP 2000 A Suction suction systems: approx. 2065 m3/h engine: 5.5 KW Cat. Nr.: PP W61 000 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, user manual; ready to use

L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

Used crown corks press SACMI /Italy/ type PTC 027. Perfect working condition. 27 dies, 27 strokes. Produced in Italy.

Used lining machine PMC 250. Profile 916. Produced in SACMI Italy. Perfect working condition.

Protec Optimax • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Herman Schwabe Die Cutting Shaping Press Mechanical Press Model DG-HD Platen size 770mm x 1000mm Die cut shapes Manual cut / load pressure 4" stroke, 7" bore, 10 H.P. Motor, 415 volts 50 cycles 3 phase 14.84 full load current Made in Brooklyn, New York Serial number 50367 Complete with starter Overall dimensions 1.2m x 1.5m high x 3.3m long

Planetary grinders Manufacturer Precise In a suitcase with extensive zubehoer Rule transformer Tool holder SK40 with interchangeable tightening bolt Control range: 15000 - 45000 rpm Orbital speed 70 - 120 rpm when working horizontally max.: 70 rpm Radial delivery: 0.0001 - 0.002 mm Reception: SK40 electr. Connection: 220 V, 600 W Special price

Nominal Rating 1000 l/h; prepared - top condition

capacity 90 l/h electric power 6 kW electric outlet 400V 50Hz (3 phases) fuse 16 A weight 10 kg material 1.4301 / AISI 304 suitable for fruit and vegetable juices ; new machine - top condition

approx. 8.40 running metres, H: 650cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 650 cm D : approx. 110 cm L : approx. 8,40 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR65 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 04 x Stand approx. 650 cm x 110 cm, disassembled. 18 x traverse approx. 270 x 14 x 5 cm, D30. 36 x locking pins. Levels: Floor + 3 36 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1520,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.

approx. 5.70 running metres, H: 650cm, compartment load: 3000 kg, pallet racks, heavy-duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 650 cm D : approx. 110 cm L : approx. 5,70 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR65 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 03 x Stand approx. 650 cm x 110 cm, disassembled. 12 x traverse approx. 270 x 14 x 5 cm, D30. 24 x locking pins. Levels: Floor + 3 24 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1080,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.

approx. 100,16 running meters, H: 550cm, Compartment load: 3000 kg, pallet racks, Heavy duty racks, High racks, Industrial shelves, Shelves immediately from stock Data: H : approx. 550 cm D : approx. 110 cm L : approx. 100,16 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR55 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 37 x stand approx. 550 cm x 110 cm, disassembled. 216 x traverse approx. 270 x 14 x 5 cm, D30. 432 x locking pins. Levels: Floor + 3 432 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 14.930,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / n ...

approx. 36,30 running metres, H: 550cm, Compartment load: 3000 kg, pallet racks, Heavy duty racks, High racks, Industrial shelves, Shelves immediately from stock Data: H : approx. 550 cm D : approx. 110 cm L : approx. 36,30 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR55 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 14 x stand approx. 550 cm x 110 cm, disassembled. 78 x traverse approx. 270 x 14 x 5 cm, D30. 156 x locking pins. Levels: Floor + 3 156 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 5500 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.