pfauter p 400 used for sale

For sale a milling head without counter bearing

For sale a milling head at the company Pfauter ca.2012 completely overhauled.

Description: SUBMERSIBLE SLURP PUMP, IP55, 2.6KW, 3000 1/MIN, 220-240/380-420V 50HZ, FLOW RATE 600 L/MIN AT 12.0M, DELIVERY HEIGHT, SUPPLY DEPTH 570MM, PIPE CONNECTION G 2 1/2, MAX. SOUND PRESSURE LEVEL 76 DB (A), WITH HARTING PLUG-IN CONNECTOR: 10-PIN DESINA, TAL901/570-MVX+227. Used in milling or grinding machines to pump around the cooling oil. Approx. Onsite Dimension. (l x w x h): 1,400 x 1,400 x 1,300 mm, weight approx.: 100 kg

Div. Interchangeable wheels for the gearbox Speed...

Various interchangeable wheels for the gearbox Speed...

Magnetic chip conveyor of a PFAUTER PA320 can be used universally. Length 135cm

One servo motor for each X/Z/A/ and C-Axis

max. wheel diameter: 4400 mm gear width: 645 mm max. module: 35 Control: Siemens main drive motor: 37 kW table diameter: 2500 mm max.helical angle: +/- 30 ° workpiece weight: 40000 kg total power requirement: 142 kVA weight of the machine ca.: 75 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,9 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,9 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,9 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

P1251

workpiece dia.: 100 mm module: 3.0 mm fixture slide travel: 400 mm Control: Siemens - Sinumerik 840 D max. milling cutter diameter: 80 mm cutter length max.: 180 mm turning speed range: 50 - 12.000 U/min table turning speeds: 3.000 U/min Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached extraction system: Ringler, - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle - AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - Workspace, - tailstock, - measuring device, - refrigeration system, - Industrial robots: Epson, - goods carrier, - conveyor belts, - control panel, The machine is in very goo ...

workpiece dia.: 80 mm module: 2,5 mm fixture slide travel: 220 mm Control: Siemens - Sinumerik 840 D max. milling cutter diameter: 100 mm cutter length max.: 160 mm turning speed range: 200 - 5.000 U/min table turning speeds: 3.000 U/min Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached exhaust system for dry processing: Ringler, - Noise insulation for dry milling machine - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - coolant device, - Automation unit: AMZ, The machine is in very good condition. For additional equipment information p ...

max. wheel diameter:180 mm gear width: mm max. module:4 total power requirement:14 kW weight of the machine ca.:8 t slide travel axial ( Z-axis ):300 mm work piece - max.:490-640 mm

Key data: 3000 mm, 32

1 CNC Gear Milling Machine Make: Gleason-Pfauter Model No.: P2001/3000 Year of manufacture: 1980 / Retrovit 2000 Largest milling diameter: 3000 mm Largest module: 32 Face plate diameter: 1920 mm Power main drive: 30 kw. max. workpiece weight: 25 tons. Equipment / Accessories: CNC control made by Siemens Internal gear milling head Setting Stick - Counter Holder Workpiece fixtures Interchangeable wheels various milling cutters various cutter mounts Conveyor

max. wheel diameter: 2400 mm gear width: 600 mm max. module: 30 Control: Sinumerik 840 D workpiece external diameter max.: 3400 rim strength max.: 500 radial slide travel: 1050 mm axial slide travel: 1600 mm swivelling range milling head: +- 15 ° table diameter: 1870 mm table hole: diameter: 600 mm depth: 875 mm table load capacity - central/maximum: 30000 kg workpiece: tip circle diameter: 440 mm root circle dia. min.: 310 mm cutter width - max.: 120 mm total power requirement: 100 kW weight of the machine ca.: 37,5 t dimensions of the machine ca.: 12,3 x 5,6 x 4,4 m machine can be used only for internal gears - dry cutting type Equipment/accessories: - column increased - internal head IKF2 - big clamping table - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece dia.: 100 mm Control: Siemens 840D weight of the machine ca.: 5 t Worm milling head with toothed belt drive. With infinitely variable high-performance drive and maintenance-free bearing. Spindle with hollow shank taper for holding milling arbor with counter bearing. - Workpiece spindle with direct and maintenance-free drive. Equipment: - CNC Siemens 840D - Cooling tank - chip conveyor Product data : - Diameter : 100 mm - Nominal module hobbing : approx. 3.0 mm Endless screw milling : approx. 5.0 mm - Max. axial movement : 320 mm - Cutting head orientation : -45 / + 115 ° - Main milling cutter max. diameter : 118 mm - Max. Max. cut-out length of the post cutter : 180 mm - Max. Mill movement ( shifting) : 160 mm - Max. Spindle speed of the workpiece carrier : 3000 t/mm - Min./max. distance between axes : 10/100 mm - Cutting head motor power : 14 kW - Main milling speed : 50-12 ...

Description: SN 13135 Toothing width - max. 25 mm Pitch circle diameter - external toothing 120 mm Pitch circle diameter - internal toothing 120 mm z-way 150 mm Spindle diameter 85 mm Mounting taper - steep taper PKP 45 Workpiece table - Ø 160 mm Table bore 63 mm Stroke rate - infinitely variable 500 / 2500 strokes/min Workpiece speed max. 125 1/min. Bevelling angle - max. + / - 45 ° Tool diameter max. 125 mm Table load max. 1000 KG Minimum distance table surface - tool spindle 0 / + 180 mm Maximum distance table surface - tool spindle 200 mm Maximum distance table surface - tool spindle 350 mm Connected load 40 kVA Description: Motorised stroke adjustment, workpiece storage, automatic workpiece change, chip conveyor (magnetic), coolant device Dialogue program, fault diagnosis max. wheel diameter: max. 250 mm, module min./max.: max. 3,5, control: SINUMERIK 840 C S ...

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

max. wheel diameter:1500 mm gear width:600 mm max. module:16 min. module:1 total power requirement:38 kW weight of the machine ca.:18,7 t dimensions of the machine ca.:7,7 x 3,6 x 4,5 m m Retrofit in 2004, original from the 80s No internal hobbing device

max. wheel diameter: 3000 mm gear width: 1200 mm max. module: 30/40 min. module: 2 table diameter: 2500 mm table load capacity: 400 kN hob dia. - max.: 450 x 500 mm milling spindle speeds: 10 - 165 U/min hob length max.: 500 mm tip circle diameter: 2050 mm tooth helical angle min/max: 0 - 45 ° center distance betw. workpiece-tool min/max.: 150 - 1750 mm milling slide swivelling: 50 Grad distance table / counter stay: 1050 - 2050 mm shifting: 300 mm workpiece weight: 40 t table bore diameter: 800 mm depth of hole: 1100 mm main drive motor: 37 kW min. workpiece diameter: 290 mm min. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1800 mm/min radial feed: 1 - 500 mm/min feed: Tangential 1 - 450 mm/min rapid traverse: 1875 / 530 / 470 mm/min electrics - voltage/frequency: 380 / 50 V/Hz control: Siemens Sinumerik 3M total power requirement: ...

Diameter: 0 mm Width: 0 mm Bore: mm Tangential head for gear hobber RS 2 - also available: Tangential head for gear hobber RS 00 ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1800 mm gear width: 735 mm max. module: 12 min. module: 1 total power requirement: 30 kW weight of the machine ca.: 23 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 350 mm gear width: 350 mm max. module: 8 min. module: total power requirement: 7,5 - 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Gear hobber with gear shaping device, 2-cut cycle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kW tool adaptor: 0 total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 900 mm gear width: 500 mm max. module: 1 min. module: 10 total power requirement: 16 kW weight of the machine ca.: 8.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4400

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4401

Hobbing machine make PFAUTER type RS 1Machine -No: 3108 built in 1941Technical specifications:largest diameter for face and worm gearswith / without counter holder: 400/750 mmlargest milling width for spur gears (up to 275 mm dia.over 275 mm diameter): 295 - 315 mmSmallest number of teeth to be milled: 12largest module division: 8Helical gearsHelical tooth angle: 10 ° 30 ° 45 ° 60 °largest millable wheel diameter: 750/600/500/200 mmMillable widths for the largest diameter: 270/270/270/270 mmmillable widths at Drm. under 275 mm: 260/250/245/235 mmClamping table diameter: 580 mmTable bore: 100 mmgreatest collet tension for shafts (large material passage64 mm): 65 mmsmallest axis distance between milling cutter and workpiece: 30 mmlargest axis distance between milling cutter and workpiece: 440 mmDrm. of the workpiece mandrel: 36 mmDrm. of the milling arbors: 27-32-40 mmLargest clampable ...

Escofier I300V Gear Rolling Machine CNC Thread Roller & Polishing Machine Fabr. Escofier, type Flex 40 Syncroll, YOC 2011 Siemens control system, type Sinumerik

max. wheel diameter: 330 mm gear width: - mm max. module: 7 min. module: 0,5 Control: Siemens 840 C total power requirement: 72 kVA weight of the machine ca.: 11,7 t dimensions of the machine ca.: m We offer a Pfauter model G 320 gear grinding machine for sale numerical control on 8 axes for the machining of gears with straight and helical toothing, with rolled profile for enveloping cuts, the one Worm profile disc used. Technical specifications: CNC control Siemens 840 C Controlled axes: X Radial axis Y Tangential Shift Z Vertical axis A Workhead rotation B Worm rotation during processing C Table rotation U Radial axis dresser V Tangential axis dresser Module 0.5 – 7.0 Minimum workpiece diameter 10 mm Maximum workpiece diameter 330 mm Number of teeth 10 - 600 Vertical carriage thrust Z 200 mm Horizontal grinding wheel - carriage stroke X 230 mm Tangential slide stroke Y 135 mm Angle o ...

amount: 36 STK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Talladora de fresa madre PFAUTER PA 210, Ø max. gear: 430 mm, Module: 8, Hobbing length: 275 mm, Brand cnc: SIEMENS, Cone milling spindle: MORSE 5, Hob spindle speeds: Max 550 r.p.m., Maximum inclination: +/- 40º, Maximum length tool: 228 mm, Maximum ø of tool: 163 mm, Minimum number milling teeth: 4, Number of axles cnc: 4 (Z, X, B and C), Tangential tour: 170 mm, Ø hole table: 90 mm, Ø table: 240 mm, Axial power motor (z): 13 Nm, Radial power motor (x): 13 Nm., Motor power table (c): 20 Nm., Power tool motor (b): 12 Kw, Total power: 36Kw, Voltage: 220/380 V, High: 3.085 mm, Long: 5.970 mm, Weight: 3.085 mm, Width: 2.940 mm

liter capacity: 3000 l range L-W-H: 1400 x 1400 x 1300 mm weight: ca. 100 kg total power requirement: 6 kW weight of the machine ca.: 450 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2800 mm gear width: - mm max. module: 20/30 min. module: Control: Siemens 840 D total power requirement: 40 kW weight of the machine ca.: 50 t dimensions of the machine ca.: 7 x 4,5 x 4,75 m The machine has only a few working hours and is like new. The machine is under power and may be inspected by prior arrangement. CNC control Siemens 840 D Nominal workpiece diameter: 2800 mm Table diameter: 2500 mm Pitch wheel diameter: 2,200 mm Table bore diameter: 800 mm Table bore depth: 875 mm Machine nominal module Hobbing aprrox. 20 mm gear Milling approx.: 30 mm Smallest/largest distance between milling cutter and workpiece axis: 600/1,735 mm Largest axial slide path – special design: 1,000 mm Largest champable hob diameter: 350 mm Largest champable hob length: 375 mm Swivel range of the milling head: + 30/- 45o cutter arbor cone: HSK-B160 (hollow shank taper according t ...

Pfauter gear hobbing machine / module 2.5 x250 -Module 2.5mm -Wheel diameter 250mm -Mandrels -Interchangeable wheels -otherwise as pictured Dimensions: Ji7pv08nrp LxWxH 1.4x0.9x1.7 meters Weight approx. 900Kg

max. wheel diameter: 1200 mm gear width: 1000 mm max. module: 25/36 Modul min. module: 1 Control: Siemens 840 D PowerLine table diameter: 1200 mm table load: 15 t total power requirement: kW weight of the machine ca.: 24 t dimensions of the machine ca.: 6,5 x 4 x 3,75 m Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - Power clamping device - 2 x fume separator make 3nine type EMMA - Chip scraper conveyor - Set of adjust ...

max. wheel diameter: 1200 mm gear width: 350 mm max. module: 16 min. module: 0,5 max. workpiece diameter: 1400 mm table diameter: 1200 mm table hole: 300 mm control: Siemens 840D Powerline total power requirement: 75 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 5x3x3,8 m Gleason-PFAUTER CNC gear shaping machine P 1200 S for the production of internally and externally cylindrical gears with internal and external teeth and other rolling profiles and moulds profiles and moulds that regularly occur on the cylindrical workpiece circumference and for the production of profiles in the single part process. Special version with hydraulic shaping head H1 SCOPE OF EQUIPMENT: - Basic machine P1200S, Siemens 840D Powerline (XP) - Hydraulic shaping head H1 - Signal light (3-colour) - Extended software for fault diagnosis - Telephone diagnosis system - Chip disposal through table b ...

max. wheel diameter:275 mm gear width:58 mm max. module:8 min. module:0,5 weight of the machine ca.:10 t max. number of teeth:200 min. number of teeth:5

Max. disk diameter: 275mm, connected load: 100kVA, weight: 10t, was maintained regularly, with cooling system, an on-site inspection is possible.

max. wheel diameter: 1200 mm gear width: 1000 mm max. module: 25/36 min. module: 1 Control: Siemens 840 D table load: 15 t total power requirement: 75 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 6,5x4x3,75 m Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - 2 x fume separator make 3nine type EMMA - Chip scraper conveyor - Set of adjusting wedges - Dialogue program Milling in single-part process - Sw ...

max. wheel diameter: 130 mm gear width: 25 mm max. module: 4 min. module: 0,5 Control: Siemens 840 D strokes - infinitely variable: 500-2500 Hub/min stroke: 30 mm work-spindle diameter: 85 mm total power requirement: 49 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 6,4x4,5x4,4 m Counterhold without center hydraulically operated counter arm and Linear guides. For automatic ring loader, with 4 stations The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1600 mm gear width: 700 mm max. module: 25 min. module: 2 x-axis: 875 mm z-axis: 1000 mm control: Siemens 840 C weight: 38 t milling arbors: HSK-B160 table load: 15 to t arbor support: 900 verfahrbar total power requirement: 100 kW weight of the machine ca.: 27 t dimensions of the machine ca.: 7,9 x 7,4 x 4,0 m Sonderfräskopf M2 - Max Fräserdurchmesser 350 mm - Max Fräserlänge 375 mm - Max Fräserverschiebung 300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 630 mm gear width: 410 mm max. module: 8 min. module: 1 milling spindle speeds (infinitely variable): 62 - 390 U/min max. milling cutter diameter: 192 mm cutter length max.: 258 mm table diameter: 550 mm total power requirement: 16 kW weight of the machine ca.: 7,9 t dimensions of the machine ca.: 3,7 x 2,5 x 2,1 m Chip conveyor, change gears, arbors, toolings. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1200 mm gear width: ca. 800 mm max. module: 25/35 Control: Simens 840 D PL workpiece diameter: 1200 mm Hobbing approx.: 25 mm tooth form milling approx.: 35 mm axial slide travel: 1000 mm table diameter: 1200 mm table bore diameter: 300 mm table load: 15000 kg total power requirement: 110 kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 8,1 x 6,2 x 3,8 m Equipment/Accessoires: - Motor milling head M3 special speed series - Colum - increased 1. 000 mm - Clamping device - Dialogue program Milling in single-indexing process” - Telephone diagnostic system - swivelable counter bearing holder - measuring device - machine with counter steady - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1200 mm gear width: 350 mm max. module: 16 control: Sinumerik 840 D max. swing diameter: 1400 mm max. table load: 15000 kg table bore diameter: 300 mm table diameter: 1200 mm total power requirement: 150 kW weight of the machine ca.: 24 t dimensions of the machine ca.: m Workpiece with external gearing Largest modulus (in steel with approx. 600N/mm²) 16 mm - Maximum gear width 350 mm - Largest outside diameter 1. 200 mm Workpiece with internal gearing Largest modulu (in steel with approx. 600N/mm²) 16 mm - Maximum gear width 350 mm - Maximum swing diameter 1. 400 mm - Maximum inner diameter 1. 200 mm Tool - Maximum impeller diameter 260 mm - Stroke length 50 mm – 380 mm Equipment/Accessoires: Special version with hydraulic cutting head H1 workpiece diameter: External gears 1. 200 mm Internal gears 1. 200 mm Largest workpiece swing diameter - without steady rest 1 ...

Description: Additional information: Pfauter control cabinet for P 750 NC, - Heldt & Rossi servo amplifier SM 807 DC 1750-90, serial no. according to photo, good condition, weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,800 mm

Description: Technical details: inner cone of the Sk40 milling spindle, speed range 300 to 3000 rpm, drive motor 15 kW, max. milling cutter 120 x 170 mm, milling head was overhauled by Pfauter 3 years ago Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 500 mm, weight approx.: 800 kg