pfauter p 400 used for sale

The machine is in good technical condition, after prior agreement it is possible to test it. approx. 3000 hours of TRIPS 550X400

: gebraucht : 2020 : 1658 : prompt, Zwischenverkauf v : Bulgarien : 26500 € : 1 : 22600 € : 400 mm : 1000 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 MK : 12 : 50-2.240 1/min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 4 kW : 2750 mm : 1100 mm : 1600 mm : 1540 kg This machine is used in our workshop for repair work, therefore it has only been used very little so far. (New price € 36,070.00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection saf ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 8200 € : 158.26 € : 1250 kg : 1300 mm : 450 - 550 mm : 400 mm : 50 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 1250 400 M D1300) € 10.900,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sliding table length: 3200 mm; cutting width at the fence: 1350 mm; cutting width at the cross cut: 3200 mm; cutting depth: 125 mm; scoring unit: ja; sawblade diameter: electric; tilting adjustment sawblade: electric; adjustment fence: manuell; readout sawblade tilting: Scala; read out sawblade height: -; read out fence: Scala; read out crosscut stop: Scala; sawblade diameter: 400mm; number of speeds: 3000 / 4000 / 5000 U/min; motor power: 7 kW; motor brake: yes, automatic; suction connection: 80mm und 120mm; machine length: 3400mm; machine width: 2000mm; weight: 900kg;

working width: 400 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 Bürsteinheiten centrally adjustable and each with a single fine adjustment; 1. brush: methal brush, diameter 220mm; 2. brush: thynex brush granulation 80, diameter 220mm; height adjustment: handwheel; readout workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 3 kW; motor power feed: 0,37 kW; machine length: machine width: weight: In this machine, the brushes are pivotable diagonally to the feed direction, As a result, the edges are broken similar to oscillating brushes.

working width: 400 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units separately adjustable; 1. brush: metal brush 220mm; 2. brush: tynex brush, granulation 80, diameter 220mm; height adjustment: handwheel; height adjustment: mechanical counter; feed speed: 4 - 12 m/min; motor power brush: 2 x 3 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 900mm; weight: 500kg;

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

General SKU244Y171 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor11 KW Inlet diameter22 mm Specified Features - Basket centrifuge MaterialStainless steel 1.4404 (316L) Basket centrifugecheck Closed basketDuplex 2205 Capacity100 dm³ Basket sizesø 800 x 400 mm Max. loading weight125 kg Hydraulic operatedcheck Liquid outletDN100 With hydraulic unitHydra power Motor1,50 kW, 400 V, 1445 rpm With variable speed drivecheck Max. basket speed2600 rpm Max. temperature0° / 80 °C Information MakeRiera Nadeu Serial10590/P19/00726 Magento base g_extra_specificationsBasket dia. 800mm, Max. 2.600 Rpm, solid wall basket, contact parts in stainless steel AISI-316L / DIN1.4404, Basket wall in Duplex 2205, Max. allowable weight 125 KG according to technical documentation (manufacturer tag mentions 180 KG), motor 11,0 KW, 400/690 Volt, with control cabine ...

General SKU098A526 MakeRPA Aoustin Process Technologies Darnetal TypeNovamix NX-400 Mach.No.891-A Year of construction2002 Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume400 Ltr. Motor30 KW Specified Features - Universal mixer Universal mixer(1x) Capacity400 Ltr Vessel sizesdia. 915x700mm With covercheck Pneumatic operated outletdia. 200mm With jacket(24 Ltr) With motor30,0 KW (Ex) With lump breakercheck With motor5,5 KW, 380 Volt (Ex) MaterialStainless steel 1.4404 (316L) Information LocationBarneveld Floorspace2,5x2,3 M Total height2,6 M Weight3600 KG ATEX compatiblecheckUniversal mixersDiscountRpa AoustinMixers > Universal mixersDiscountBrand > Rpa Aoustin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...

General SKU023C129 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure vapour evaporator6 Bar Main Features Surface12.5 m2 Specified Features - Falling film evaporator Falling film evaporator(1x) Heating surface12,5 m2 Tube capacity120 Ltr Number of tubes:34 Tube diameter40mm Tube length3000mm Shell capacity210 Ltr Max. temperature140 Degr. C. Capacityvessel 550 Ltr With jacket(coil), Capacity 10 Ltr MaterialStainless steel 1.4571 (316Ti)Falling film evaporatorsDiscountRutzColumns > Falling film evaporatorsDiscountBrand > Rutz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

A horizontal flow-wrapping packaging machine Hugo Beck is available. Cycle rate: 5000/h, max. product width: 480mm, max. product height: 150mm, min. product length: 40mm, working height range: 820mm-900mm, max. roll diameter: 400mm, max. roll width: 600mm, roll materials: PO/PE/PP, machine width: approx. 1700mm, weight: approx. 2100kg. Including film folding device FF700-IN, print mark control, seal welding, overlap longitudinal sealing 10mm-30mm, pressure belt and pressure roller. Documentation available. An on-site inspection is possible.

Two heat-resistant flat belt conveyors Integra are available. 1) Center distance: 15200mm, belt length: 15800mm, belt width: 1180mm, overall height: 600mm, belt width: 800mm, max. operating temperature: 130°C, conveying capacity: 30t/h, motor power: 3kW. Including spare edge protection rubber and motor bracket. 2) Center distance: 7500mm, belt length: 8100mm, belt width: 1080mm, overall height: 600mm, belt width: 800mm, max. operating temperature: 130°C, conveying capacity: 30t/h, motor power: 3kW. Including 6× Kito chain hoists. Documentation available. An on-site inspection is possible.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 62400 € : 1179.36 € : 4100 mm : 6 mm : 4 mm : 50 mm : 12 1/min : 1.5 ° : 20 : 17 to : 1000 mm : 200 mm/s : 15 kW : 200 l : 3 Stk. : 865 mm : 580 mm : 4510 mm : 5230 mm : 2300 mm : 3600 mm : 2150 mm : 11460 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 13760 € : 264.19 € : 0.4 - 2 mm : 400 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...

x-travel:560 mm y-travel:560 mm z-travel:660 mm control:Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds:20 - 20.000 1/min spindle drive:25/ 35 kW max. torque on the spindle:86 / 130 tool taper:HSK-A63 Number of tool station:60 diameter of tools max.:70 mm Tool diameter with no neighbouring tools:170 mm tool length - max.:450 mm weight of tools max.:12 kg numbers of pallets:2 Pallet dimension:400 x 400 mm max. workpiece diameter:630 mm workpiece height max.:900 mm table load:400 kg rapid travel x/y/z:60 m/min Feed x/y/z:60 m/min internal coolant system feed:70 bar weight of the machine ca.:8,5 t dimensions:3200 x 4800 x 2900 mm Renishaw probe (spindle):Vorbereitung / preparation only Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. The machine has just received a new milling spind ...

x-travel:600 mm y-travel:580 mm z-travel:530 mm distance spindle center to column:630 mm distance spindle center to table:100-600 mm milling feed range:1-10.000 mm/min max. table load:200/100 kg max. tool weight:8 kg positioning accuracy:+/- 0,01 mm :8000/15000 1/min spindle drive:7,5/11,5 /5,5 kW repeating accuracy:+/- 0,008 mm weight of the machine ca.:7,4 / 7,65 t Brand-new CNC vertical machining center with CNC control FANUC or HEIDENHAIN Warranty: 12 months More information can be found in the Appendix.

rotor dia:30-500 mm hobbing length:500-1000 mm total power requirement:80 kW weight of the machine ca.:15 t dimensions of the machine ca.:3,6 x 2,5 x 3,0 m max. module:8 Max. module Et milling = 12 Max. module hobbing = 12 Max. axial travel = 110 to 1100mm Max. cutter speed = 300rpm Max. cutter displacement tangential = -350 to -55mm Max. table speed = 100rpm Table drive: torque motor Filter system: chip conveyor is for magnetic materials, belt filter is for all suspended matter that floats in the oil Including milling mandrel

turning diameter:830 mm turning length:4.000 mm turning diameter over bed slide:540 spindle bore:130 mm turning speed range:2 - 1.600 U/min rapid speed:4/5 m/min feed speeds:1 - 2.000 mm/min total power requirement:55 kW dimensions of the machine ca.:7 x 2,2 x 2 m weight of the machine ca.:7,5 t

x-travel:500 mm y-travel:400 mm z-travel:330 mm table-size:710 x 410 mm spindle taper ISO:40 quill stroke:100 mm control:HEIDENHAIN TNC 335 B table load:180 kg no. of flutes:8 groove width:14/25 mm tool taper:SK 40 speeds::20 - 3000 U/min feeds:infinitely variable1-1250 mm/min rapid traverse:5000 mm/min total power requirement:13 kW weight of the machine ca.:2500 kg dimensions of the machine ca.:2000 x 2800 x 2300 mm Year:ca. 1984 Zusatzinformationen ? Schile-Elektroschrank mit CNC-Steuerung Heidenhain TNC 355 ? Starrer Winkeltisch 710 x 400mm ? Spritzschutzverkleidung / Halbkabine ? Kopf nach Skala präzise drehbar über Kurbel ? Kopf komplett wegschwenkbar für horizontal Spindel

x-travel:1190 mm total power requirement:25 kW feeds::3 - 2000 mm/min weight of the machine ca.:4,3 t table-size:1600 x 400, 5 Spannbacken mm dimensions of the machine ca.:4000 x 3600 x 2200 mm speeds:45 - 1800 U/min y-travel:530 mm z-travel:540 mm tool taper:ISO 50 control cabinet:940 kg

x-travel:500 mm y-travel:400 mm z-travel:330 mm table-size:400 x 710 mm spindle taper ISO:40 quill stroke:100 mm control:HEIDENHAIN TNC 335 table load:180 kg no. of flutes:8 groove width:14/45 mm tool taper:ISA 40 speeds::20 - 3000 /28- 4000 U/min feeds:infinitely variable1-1250 mm/min rapid traverse:5000 mm/min total power requirement:13 kW weight of the machine ca.:2500 kg dimensions of the machine ca.:2000 x 2800 x 2300 mm Documents:inkl. Zusatzinformationen ? Schile-Elektroschrank mit CNC-Steuerung Heidenhain TNC 355 ? Starrer Winkeltisch 710 x 400mm ? Spritzschutzverkleidung / Halbkabine ? Kopf nach Skala präzise drehbar über Kurbel ? Kopf komplett wegschwenkbar für horizontal Spindel

x-travel:500 mm y-travel:250 mm z-travel:325 mm table-size:400 x 200 mm T-slots:10/ 20 mm T-slots:4 St workpiece height max.:300 mm template table:380 x 380 mm speeds::2500 - 20000 U/min no. of turning speeds:3 total power requirement:0,25 kW weight of the machine ca.:430 kg dimensions of the machine ca.:1000 x 1200 x 1500 mm

saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden

x-travel:850 mm y-travel:500 mm z-travel:610 mm rotary table::400 mm spindle turning speed range:12.000 1/min drive capacity - spindle motor:17/10 kW control:HEIDENHAIN iTNC 530 Tool changer:40- fach spindle taper ISO:SK 40 weight of the machine ca.:7,7 t total power requirement:28,5 kW dimensions of the machine ca.:3 x 2.70 x 3,2 m 5-axis simultaneously universal-machining center, NC-rotary-swivelling table dia. 400mm, 3D infrared touchprobe, el. handwheel, chipconveyor, airblast through spindle, internal coolant supply 40bar, flushgun, direct measuring system, approx. 38.000h "machine on", approx. 14.500h "spindle on"

x-travel:600 mm y-travel:580 mm z-travel:580 mm numbers of pallets:2 pallet size::400 x 400 mm max. workpiece weight:400 kg spindle taper ISO:40 spindle speeds::35 - 12000 feed speeds:1 - 50000 mm/min rapid speed:50 m/min total power requirement:25 kW weight of the machine ca.:12 t dimensions of the machine ca.:3,6 x 3,6 x 2,9 m with CNC SEICOS 16 M ( FANUC base ) autom. toolchanger 61-pockets pallet indexing 1° chip conveyor and coolant attachment exhauster clamping cube and diverse toolholders

turning diameter:830 mm turning length:4000 mm turning diameter over bed slide:540 mm spindle bore:130 mm turning speed range:2 - 1600 U/min rapid speed:4 / 5 m/min feed speeds:1 - 2000 mm/min total power requirement:55 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment

material width:400 mm coil weight:3,0 t material thickness:0,5 - 4,0 mm coil internal diameter:460 - 530 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:50 mm no. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mm material cross-cut:1600 mm² speed of coil line:0 - 20 m/min power requirement:35,0 kW weight:10,5 t dimensions (WxDxH):10,0 x 2,5 x 2,9 m straightening machine:KRE 50.400/9 adjustment of straightening rolls :motoric insertion wedge:hydraulic adjustable decoiler:3000.1 snubber roll:hydraulic expansion:hydraulic sideway adjustment:motoric pivoting:manual roll feed:Servo; WVE 160/400 intermittant lifting:hydraulic

General SKU035T171 LocationBarneveld Material Housing materialStainless steel Rotor materialStainless steel Main Features MaterialStainless steel Motor2.2 KW Inlet diameter400 mm Specified Features - Rotating valve MaterialStainless steel Rotary valvecheck Rotor diameter400mm Rotor width480mm Inletdia. 400mm Inlet flange sizesdia. 540mm Outletdia. 400mm Outlet flange sizesdia. 540mm With motor2,2 KW, 230/400 Volt Rotor speed± 36 Rpm Information Floorspace1,2x0,6 M Total height0,6 MDiscountRotating valves-DiscountRotary valves > Rotating valvesBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU404U1219 MakeAlbi Alois Binderberger LocationBarneveld Pressure Working pressure0.99 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume4000 Ltr. Motor3 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity4000 Ltr. Vessel sizesDia. 1800x2460 mm Dished bottomcheck Dished top sidecheck ManholeDN450 Top connectionsDN50, DN25(2x) OutletDN50 Half coil jacketedcheck (100 Ltr.) With paddle stirrercheck Motor3 kW, 380/660Volt, 1400/103rpm Speed mixing shaft103 rpm Stainless Steel Reactors MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Information No.767 Year of construction1986 Floorspace1,85x1,85 m Total height2,46 m Weight±2500 kgCatalysts & fillersPaper & otherSolventsStainless Steel ReactorsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsSugarLubricants & ol ...

General SKU345S744 MakeKresta Anlagen- Stahl- und Montagebau GmbH (AT) No.94146-6 Year of construction1994 Mounted on legscheck Pressure Working pressure3.2 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume4000 Ltr. Motor1.3 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity4000 Ltr (5500 Ltr) Vessel sizesDia: 1800 x2895mm Conical bottomcheck Dished top sidecheck ManholeDN600 Top connectionsDN150, DN50, DN40, DN25 OutletDN50 With jacketcheck(600 Ltr) Max. temperature-10/200°C With propellor stirrerHWL-040-L Motor1,3 KW, 230/400 Volt (EX) Speed mixing shaft484 rpm Information LocationBarneveld Floorspace2,21x2,21 m Total height4,1 m Weight3000 kg ATEX compatiblecheck Extra Specificationswith TÜVCatalysts & fillersSolventsStainless Steel React ...

General SKUR0403 LocationBarneveld Main Features MaterialMild steel Volume4000 Ltr. Motor18.5 KW Specified Features - Conical mixer Conical mixercheck Capacity4000 ltr Largest cone diameter2500mm Cone height3800mm Manholeca 1800x700mm Top drivecheck Motor18,5 kW 380 Volt Motor0,55 KW 380 Volt (78rpm) Cantilevered screwcheck Bottom dischargecheck MaterialMild steel Information MakeHeilig Type4000 SVD Floor space2,9x2,9 M Total height5,0 M Weight5000 Kg Extra Specificationsoutlet with ball valve screw stainless steel Feed additivesOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicPlastic & polymersConical mixersOther chemicalStarchFine chemicalsGeneric medicinesPowdered foodsPaints & coatingsHeiligIndustries > Food & Feed > Feed additivesIndustries > Pharmaceutical > Other pharmaceuticsIndustri ...

General SKUR1205 MakeJeger AG (CH) LocationBarneveld Type4000 Ltr. Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume4000 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity4420 (4000 ltr nett) Vessel sizesdia. 1800x2000mm Dished bottomcheck Dished top sidecheck Manholedia. 500mm Top connectionsdia. 50mm (4x) dia. 300mm (1x) Outletdia. 80mm Half coil jacketed(90 Ltr) Max. temperature-30/200 degr. C With propellor stirrercheck Motor2.0 kW 220/380 Volt (Ex) Speed mixing shaft203 rpm. Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.5653 Year of construction1992 Floorspace2.4x2.4 M Total height3,2 M Weight1600 Kg ATEX compatiblecheckCatalysts & fillersSolventsStainless Steel ReactorsDetergent & surf.Other pharmaceutic ...

Litz LU 400Year of manuf. : 2016 Control : Heidenhain TNC 640 Speed : 12000 rpmMovement X/Y/Z : 400/350/350 mm____________Description:Spindle:Technology:DirectdriveSpeed:12.000 rpmPower (max.):13 kWTorque (max.):95 NmTaper:SK40NC-Swivelroundtable:B-Axis:-50°/+110°C-Axis:360°C lampingsurface:ø450 mmTableloading (max.):200 kgIn general:Toolmagazine:48 StationsRapid travers in X/Y/Z:48 m/minEquipment/Accessory:Positionsensor:Direct Scales in X/Y/ZChipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with filter and High-pressure, 30 barWorkpiecemeasurement:Touch probe, Heidenhain TS740Toolmeasurement:Laser, Renishaw NC4 TXSetup operations:Electronic HandwheelFurther Equipment:SpindlechillerFurther Accessory:Misc. used Toolholder

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)

AddUP AddUP BeAM Modulo 400Year of manuf. : 2022 Control : Siemens SINUMERIK ONE NCU 1750 ____________Description:In general:System:Industrial DED systemSafety:Vacuum lock and inert gas purgingYear of manufacture:2022Weight:approx. 7,500 kgGeometry:Number of axes:5-axis kinematics with automatic tool changerTravel ranges (x/y/z):650×400×400 mmTable diameter:400 mmTable load capacity (max.):100 kgMeasurement:Renishaw probeLasers & Optics:Laser:Dual IPG laserFine machining:500 W (IPG fiber laser, 200 µm fiber)High build-up rate:2000 W (2 kW) (IPG fiber laser, 600 µm fiber)Optics:Precitec YW 30 optics with VX10/VX24 nozzles for standard and micro claddingControl unit:Control:SINUMERIK ONE NCU 1750 (SW 6.14) on a 24 SIMATIC touch panelProcess preparation:Via Siemens NX CAM and edge computing (IPC 427e)Monitoring:Live process control via HMI Display Manager and sensors for t ...

This piston pump is ideal for well drainage or dewatering work , 2 pieces in stock. NEW and unused. Directly usable, , Throughput capacity: 30 m3/h, Max. head: 22 MWK, Max dirt passage: 1500 rpm, Weight: 625 kg, , = More information =, , Year of manufacture: 2026, Empty weight: 625 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a cal ...

: 400 kN stroke length max.: 285 mm working feed: 9 mm/sec return speed: 20 mm/sec : 660x1250 mm work height max.: 930 mm toolpiece height max.: 250 mm total power requirement: 4 kW : 200x26 mm bending capacity max. - round: 60x5,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : OH0110 : 230 € : 1 : 17 mm : 600 mm : 400 mm : 110 mm scraped surface 2 T-sluts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Distance between the centres ( mm) 755 Type cnc Stroke ( X/mm) 230 Stroke ( Z/mm) 700 Number of spindle per minute mm 1 ' 20 Number of inserts in the tool magazine 12 Bar passage ( mm) 64 Chuck connection din 55026 a2-6” Hole diameter in the chuck (mm) 76 Sleeve diameter ( mm) 95 Machine Conditions ce marked

Dominioni Punto & Pasta Pasta extruder machine Stainless 8Kg hopper with agitator and stainless screw, variable speed, variety of extrusion plates for different style pastas, mobile

The electricity and gas-powered plant enables surface treatment of plastic films by flames. Field of application: Z.B. reverse films in the solar industry
 COMPONENTS • PSA Reversible Unwinding and Reversible Winder 2200/12 PSA W/ARW 2200/12 – Fyling Splice • Hill/ Jungwirth burner unit for gas/air mixture • Suction • Erhardt+ Leimer web edge control • OCS camera system for error detection • Semket labelling system for marking defects • GWK temperature control units for roller cooling SKL SP HC300 330KW

General SKU345S761 LocationBarneveld MakeUnex Heatexchanger GmbH (DE) TypeHybrid No.HB 25228400028 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface5,7 m2 Capacity42 Ltr ConnectionsDN80(2x), DN 50(2x) Max. temperature-30/200°C. Information Floorspace1,0x0,7 M Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...

General SKU345S754 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400034 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangersHybrid Number of stages:1 Heating surface5.7 Capacity42 Ltr ConnectionsDN50(2x), DN100, DN40, DN80(2x) Max. temperature-30/200°C. Information Floorspace0,9x Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...

General SKU345S1121 LocationBarneveld MakeUnex TypeKondensator No.HB25228400032 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Heating surface5.7 m2 Capacity42 Ltr. ConnectionsDN80 (2x), DN50 (2x) Max. temperature-30/200 °C Information Total height0,7 m Weight260 Kg Floorspace0,9x1 m Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU345S814 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400033 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface5,7m2 Capacity42 Ltr ConnectionsDN100, dn80(2X), DN50, DN40 Max. temperature-30/200°C. Information Floorspace0,9 x 0,7 M Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in B ...

General SKU345S784 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400035 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface12 m2 Size length1200 mm Sizes width1100 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangersfully welden plate heat exchanger Heating surface12 m² Capacity111 Ltr., 57 Ltr. (shell) ConnectionsProduct: (2x)DN80, DN40: Plates: DN150, DN80 Max. temperature-30/200 °C Information Floorspace1,2 x 1,1 m Total height0,8 m Weight490 kg Extra Specificationssuitable for use as a condenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinati ...

General SKU345S770 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400030 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface5,7 M2 Capacity42 Ltr Connections(2x) DN50,(2x) DN80 Max. temperature-30/200°C. Information Floorspace0,9x0,7 M Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld  ...