pfau used for sale

For sale a milling head at the company Pfauter ca.2012 completely overhauled.

For sale a milling head without counter bearing

Div. Interchangeable wheels for the gearbox Speed...

Various interchangeable wheels for the gearbox Speed...

P1251

max. wheel diameter:180 mm gear width: mm max. module:4 total power requirement:14 kW weight of the machine ca.:8 t slide travel axial ( Z-axis ):300 mm work piece - max.:490-640 mm

max. wheel diameter:275 mm gear width:58 mm max. module:8 min. module:0,5 weight of the machine ca.:10 t max. number of teeth:200 min. number of teeth:5

Magnetic chip conveyor of a PFAUTER PA320 can be used universally. Length 135cm

One servo motor for each X/Z/A/ and C-Axis

max. wheel diameter: 3000 mm gear width: 1200 mm max. module: 30/40 min. module: 2 table diameter: 2500 mm table load capacity: 400 kN hob dia. - max.: 450 x 500 mm milling spindle speeds: 10 - 165 U/min hob length max.: 500 mm tip circle diameter: 2050 mm tooth helical angle min/max: 0 - 45 ° center distance betw. workpiece-tool min/max.: 150 - 1750 mm milling slide swivelling: 50 Grad distance table / counter stay: 1050 - 2050 mm shifting: 300 mm workpiece weight: 40 t table bore diameter: 800 mm depth of hole: 1100 mm main drive motor: 37 kW min. workpiece diameter: 290 mm min. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1800 mm/min radial feed: 1 - 500 mm/min feed: Tangential 1 - 450 mm/min rapid traverse: 1875 / 530 / 470 mm/min electrics - voltage/frequency: 380 / 50 V/Hz control: Siemens Sinumerik 3M total power requirement: ...

Max. disk diameter: 275mm, connected load: 100kVA, weight: 10t, was maintained regularly, with cooling system, an on-site inspection is possible.

Diameter: 0 mm Width: 0 mm Bore: mm Tangential head for gear hobber RS 2 - also available: Tangential head for gear hobber RS 00 ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1800 mm gear width: 735 mm max. module: 12 min. module: 1 total power requirement: 30 kW weight of the machine ca.: 23 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 4400 mm gear width: 645 mm max. module: 35 Control: Siemens main drive motor: 37 kW table diameter: 2500 mm max.helical angle: +/- 30 ° workpiece weight: 40000 kg total power requirement: 142 kVA weight of the machine ca.: 75 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 350 mm gear width: 350 mm max. module: 8 min. module: total power requirement: 7,5 - 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Gear hobber with gear shaping device, 2-cut cycle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kW tool adaptor: 0 total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 900 mm gear width: 500 mm max. module: 1 min. module: 10 total power requirement: 16 kW weight of the machine ca.: 8.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4400

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4401

Hobbing machine make PFAUTER type RS 1Machine -No: 3108 built in 1941Technical specifications:largest diameter for face and worm gearswith / without counter holder: 400/750 mmlargest milling width for spur gears (up to 275 mm dia.over 275 mm diameter): 295 - 315 mmSmallest number of teeth to be milled: 12largest module division: 8Helical gearsHelical tooth angle: 10 ° 30 ° 45 ° 60 °largest millable wheel diameter: 750/600/500/200 mmMillable widths for the largest diameter: 270/270/270/270 mmmillable widths at Drm. under 275 mm: 260/250/245/235 mmClamping table diameter: 580 mmTable bore: 100 mmgreatest collet tension for shafts (large material passage64 mm): 65 mmsmallest axis distance between milling cutter and workpiece: 30 mmlargest axis distance between milling cutter and workpiece: 440 mmDrm. of the workpiece mandrel: 36 mmDrm. of the milling arbors: 27-32-40 mmLargest clampable ...

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,9 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Escofier I300V Gear Rolling Machine CNC Thread Roller & Polishing Machine Fabr. Escofier, type Flex 40 Syncroll, YOC 2011 Siemens control system, type Sinumerik

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,9 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 330 mm gear width: - mm max. module: 7 min. module: 0,5 Control: Siemens 840 C total power requirement: 72 kVA weight of the machine ca.: 11,7 t dimensions of the machine ca.: m We offer a Pfauter model G 320 gear grinding machine for sale numerical control on 8 axes for the machining of gears with straight and helical toothing, with rolled profile for enveloping cuts, the one Worm profile disc used. Technical specifications: CNC control Siemens 840 C Controlled axes: X Radial axis Y Tangential Shift Z Vertical axis A Workhead rotation B Worm rotation during processing C Table rotation U Radial axis dresser V Tangential axis dresser Module 0.5 – 7.0 Minimum workpiece diameter 10 mm Maximum workpiece diameter 330 mm Number of teeth 10 - 600 Vertical carriage thrust Z 200 mm Horizontal grinding wheel - carriage stroke X 230 mm Tangential slide stroke Y 135 mm Angle o ...

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,9 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 36 STK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Talladora de fresa madre PFAUTER PA 210, Ø max. gear: 430 mm, Module: 8, Hobbing length: 275 mm, Brand cnc: SIEMENS, Cone milling spindle: MORSE 5, Hob spindle speeds: Max 550 r.p.m., Maximum inclination: +/- 40º, Maximum length tool: 228 mm, Maximum ø of tool: 163 mm, Minimum number milling teeth: 4, Number of axles cnc: 4 (Z, X, B and C), Tangential tour: 170 mm, Ø hole table: 90 mm, Ø table: 240 mm, Axial power motor (z): 13 Nm, Radial power motor (x): 13 Nm., Motor power table (c): 20 Nm., Power tool motor (b): 12 Kw, Total power: 36Kw, Voltage: 220/380 V, High: 3.085 mm, Long: 5.970 mm, Weight: 3.085 mm, Width: 2.940 mm

liter capacity: 3000 l range L-W-H: 1400 x 1400 x 1300 mm weight: ca. 100 kg total power requirement: 6 kW weight of the machine ca.: 450 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2800 mm gear width: - mm max. module: 20/30 min. module: Control: Siemens 840 D total power requirement: 40 kW weight of the machine ca.: 50 t dimensions of the machine ca.: 7 x 4,5 x 4,75 m The machine has only a few working hours and is like new. The machine is under power and may be inspected by prior arrangement. CNC control Siemens 840 D Nominal workpiece diameter: 2800 mm Table diameter: 2500 mm Pitch wheel diameter: 2,200 mm Table bore diameter: 800 mm Table bore depth: 875 mm Machine nominal module Hobbing aprrox. 20 mm gear Milling approx.: 30 mm Smallest/largest distance between milling cutter and workpiece axis: 600/1,735 mm Largest axial slide path – special design: 1,000 mm Largest champable hob diameter: 350 mm Largest champable hob length: 375 mm Swivel range of the milling head: + 30/- 45o cutter arbor cone: HSK-B160 (hollow shank taper according t ...

Pfauter gear hobbing machine / module 2.5 x250 -Module 2.5mm -Wheel diameter 250mm -Mandrels -Interchangeable wheels -otherwise as pictured Dimensions: Ji7pv08nrp LxWxH 1.4x0.9x1.7 meters Weight approx. 900Kg

workpiece dia.: 100 mm module: 3.0 mm fixture slide travel: 400 mm Control: Siemens - Sinumerik 840 D max. milling cutter diameter: 80 mm cutter length max.: 180 mm turning speed range: 50 - 12.000 U/min table turning speeds: 3.000 U/min Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached extraction system: Ringler, - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle - AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - Workspace, - tailstock, - measuring device, - refrigeration system, - Industrial robots: Epson, - goods carrier, - conveyor belts, - control panel, The machine is in very goo ...

max. wheel diameter: 1200 mm gear width: 1000 mm max. module: 25/36 Modul min. module: 1 Control: Siemens 840 D PowerLine table diameter: 1200 mm table load: 15 t total power requirement: kW weight of the machine ca.: 24 t dimensions of the machine ca.: 6,5 x 4 x 3,75 m Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - Power clamping device - 2 x fume separator make 3nine type EMMA - Chip scraper conveyor - Set of adjust ...

workpiece dia.: 80 mm module: 2,5 mm fixture slide travel: 220 mm Control: Siemens - Sinumerik 840 D max. milling cutter diameter: 100 mm cutter length max.: 160 mm turning speed range: 200 - 5.000 U/min table turning speeds: 3.000 U/min Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached exhaust system for dry processing: Ringler, - Noise insulation for dry milling machine - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - coolant device, - Automation unit: AMZ, The machine is in very good condition. For additional equipment information p ...

max. wheel diameter: 1200 mm gear width: 350 mm max. module: 16 min. module: 0,5 max. workpiece diameter: 1400 mm table diameter: 1200 mm table hole: 300 mm control: Siemens 840D Powerline total power requirement: 75 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 5x3x3,8 m Gleason-PFAUTER CNC gear shaping machine P 1200 S for the production of internally and externally cylindrical gears with internal and external teeth and other rolling profiles and moulds profiles and moulds that regularly occur on the cylindrical workpiece circumference and for the production of profiles in the single part process. Special version with hydraulic shaping head H1 SCOPE OF EQUIPMENT: - Basic machine P1200S, Siemens 840D Powerline (XP) - Hydraulic shaping head H1 - Signal light (3-colour) - Extended software for fault diagnosis - Telephone diagnosis system - Chip disposal through table b ...

General SKU251U316 LocationBarneveld MakePfaudler TypeCH2500 No.64312 Year of construction1998 Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume2867 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Notified bodyTÜV Capacity2867 Ltr. Vessel sizesDia:1200x2800 mm Dished topcheck Dished bottomcheck With covercheck ManholeDN500 Top connectionsDN80, DN50 OutletDN100 Max. temperature-20ºC/+150ºC MaterialGlass - Enamel (WWG-9115) Information Total height3,15 m Weight1385 kg Floorspace1,6x1,6 mPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...

General SKU251U320 LocationBarneveld MakePfaudler TypeCH 4000 No.64300 Year of construction1998 Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume4440 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (WWG-9115) Notified bodyTÜV Capacity4440 Ltr. Vessel sizesDia: 1400x3200 mm Dished topcheck Dished bottomcheck With covercheck ManholeDN500 Top connectionsDN100,DN80, DN50 OutletDN100 Max. temperature-20ºC/+150ºC Information Total height3,54 mtr Weight1790 kg Floorspace1,7x1,7 mtrPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mach ...

General SKU251U308 LocationBarneveld MakePfaudler TypeCH2500 No.64311 Year of construction1998 Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume2867 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (WWG-9115) Notified bodyTÜV Capacity2867 Ltr. Vessel sizesDia: 1200x2800mm Dished topcheck Dished bottomcheck With covercheck ManholeDN500 Top connectionsDN80, DN50 OutletDN100 Max. temperature-20ºC/+150ºC Information Mounted on consolescheck Total height3,15 m Weight1385 kg Floorspace1,6x1,6 mPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to in ...

General SKU251U318 LocationGermany MakePfaudler TypeBE 2500 No.64297 Year of construction1998 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialGlass Volume2500 Ltr. Motor4 KW Specified Features - Stirring vessel MaterialGlass - Enamel (WWG-9125) Closed stirring vesselcheck Capacity2500Ltr (bruto 3198 Ltr.) Vessel sizes1400x2400mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connectionsDN150, DN200, DN150 OutletDN100 Max. temperature-20ºC/+100ºC With turbo stirrercheck Cryp lock stirrer Motor4,0 kW, 1435 rpm, 400 volt, (Ex) Information Weight2700 kg CEcheck Floorspace1,6x1,6 m Total height3,79 m ATEX compatiblecheckStirring vesselsPfaudler-werkeStirring vessels > Stirring vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for  ...

General SKU251U319 LocationGermany MakePfaudler TypeBE8000 No.64291 Year of construction1998 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume8000 Ltr. Motor18.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity8000Ltr. (bruto 9367 Ltr.) Vessel sizesDia: 2200 x 3000 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionsDN300 (2x), DN250, DN150 (6x) Outletcheck150 mm With jacketcheck 800Ltr. Max. temperature-20ºC/+200ºC With turbo stirrercheck Cryo lock stirrer Motor18,5 kW (Ex, 400 V), 1460 rpm Speed mixing shaft120rpm Glass Reactors MaterialGlass - Enamel (WWG-9125) Information Mounted on legsHanging Weight9300 kg CEcheck Floorspace2,6 x 2,6 m Total height5,0 m ATEX compatiblecheckMinerals & inorganicNew arrivalsAPIGlass ...

General SKU251U321 LocationBarneveld MakePfaudler TypeCH 4000 No.64301 Year of construction1998 Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume4440 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (WWG-9115) Notified bodyTÜV Capacity4440 Ltr. Vessel sizesDia:1400x3200 mm Dished topcheck Dished bottomcheck With covercheck ManholeDN500 Top connectionsDN100, DN80, DN50 OutletDN100 Max. temperature-20ºC/+150ºC Information Total height3,54 m Weight1781 kg Floorspace1,7x1,7 mPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine  ...

General SKU251U322 LocationGermany MakePfaudler TypeBE8000 No.64299 Year of construction1998 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume8000 Ltr. Motor18.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity8000Ltr. (bruto 9367 Ltr.) Vessel sizesDia: 2200 x 3000 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionsDN300 (2x), DN250, DN150 (6x) Outletcheck150mm With jacketcheck 800Ltr. Max. temperature-20ºC/+200ºC With turbo stirrercheckCryo lock stirrer Motor18,5 kW (Ex, 400 V) 1460rpm Speed mixing shaft120 rpm Glass Reactors MaterialGlass - Enamel (WWG-9125) Information Mounted on legsHanging Weight9300 kg CEcheck Floorspace2,6 x 2,6 m Total height5,0 m ATEX compatiblecheckMinerals & inorganicNew arrivalsAPIGlass-li ...

General SKU251U323 LocationBarneveld MakePfaudler TypeCH 4000 No.64304 Year of construction1998 Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume4440 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (WWG-9115) Notified bodyTÜV Capacity4440 Ltr. Vessel sizesDia: 1400x3200 mm Dished topcheck Dished bottomcheck With covercheck ManholeDN500 Top connectionsDN100, DN80, DN50 OutletDN100 Max. temperature-20ºC/+150ºC Information Total height3,54 m Weight1781 kg Floorspace1,7x1,7 mPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine ...

General SKU251U344 LocationGermany MakePfaudler TypeBE 2500 No.64296 Year of construction1998 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialGlass Volume2500 Ltr. Motor4 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity2500 (bruto 3198 Ltr.) Vessel sizesDia: 1400x2573mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connectionsDN200, DN150(2x) OutletDN100 Max. temperature-20ºC/+100ºC With turbo stirrercheck Cryo lock stirrer Motor4,0 kW, 1435 rpm, 400 volt, (Ex) MaterialGlass - Enamel (WWG-9125) Information Mounted on legsHanging Weight2700 kg CEcheck Floorspace1,6x1,6 m Total height3,8 m ATEX compatiblecheckStirring vesselsPfaudler-werkeStirring vessels > Stirring vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

General SKU251U342 LocationBarneveld MakePfaudler TypeCH 1600 No.64320 Year of construction1998 Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume1764 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (WWG-9115) Notified bodyTÜV Capacity1764 Ltr Vessel sizesDia:1200x1800 mm Dished topcheck Dished bottomcheck ManholeDN500 Top connectionsDN100, DN50 OutletDN100 Max. temperature+100ºC Information Mounted on legscheck Weight948 kg Floorspace1,5x1,5 m Total height2,6 mPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

General SKU251U341 LocationBarneveld MakePfaudler TypeCH 1600 No.64318 Year of construction1998 Pressure Working pressure10 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialGlass Volume1751 Ltr. Pressure10 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (WWG-9115) Notified bodyTÜV Capacity1751 Ltr Vessel sizesDia: 1000x2500 mm Dished frontscheck ManholeDN500 Top connectionsDN80(2x), DN50 OutletDN80 Max. temperature+100ºC Information Mounted on legscheck Weight973 kg Floorspace2,6x1,2 m Total height1,6 mPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Net ...

General SKU251U340 LocationGermany MakePfaudler TypeCH 1600 No.64319 Year of construction1998 Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume1764 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (WWG-9115) Notified bodyTÜV Capacity1764 Ltr Vessel sizesDia: 1200x1800 mm Dished topcheck Dished bottomcheck ManholeDN500 Top connectionsDN100, DN50 OutletDN100 Max. temperature+100ºC Information Mounted on legscheck Weight948 kg Floorspace1,5x1,5 m Total height2,6 mPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...

General SKU251U339 LocationBarneveld MakePfaudler TypeCH 1600 No.64317 Year of construction1998 Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume1763 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (WWG-9115) Notified bodyTÜV Capacity1763 Ltr Vessel sizesDia:1200x1800mm Dished topcheck Dished bottomcheck ManholeDN500 Top connectionsDN100(2X), DN80 OutletDN100 Max. temperature+100ºC Information Mounted on legscheck Weight1081 kg Floorspace1,5x1,5 m Total height2,6 mPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barn ...

General SKU251U336 LocationBarneveld MakePfaundler TypeCH 4000 No.66058 Year of construction2000 Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume4440 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (WWG-9115) Notified bodyTÜV Capacity4440 Ltr. Vessel sizes1400x3200 mm Dished topcheck Dished bottomcheck ManholeDN500 Top connectionsDN100, DN80, DN50 OutletDN100 Max. temperature-20ºC/+150ºC Information Mounted on legscheck Weight1790 kg Floorspace1,5x1,5m Total height4,1mPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine i ...

General SKU251U333 LocationBarneveld MakePfaundler / DrM Fundabac TypeKolonne No.72506 Year of construction2005 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialGlass Surface9.5 m2 Specified Features - Candle filter Candle filtercheck Notified bodyTÜV Filter surface9,5 m² Number of candles14 Solids outletDN400 Capacity1150Ltr. Vessel sizesDia:700x2900mm MaterialGlass - Enamel (WWG-9115) Information Mounted on framecheck Total height4,6 m Weight1050 kg CEcheck Floorspace1,0 x 1,0 m Extra SpecificationsFluid group 1, maximum allowable total weight in use 3500 kg, maximum allowable working pressure 01/+6 bar, maximum allowable operating temperature -25ºC/+200ºC, test pressure 10.5 bar. Valve material: 1.4462 (Duplex) and Teflon liner Filter material: polypropylene.Candle filtersPfaudler-werkeFilters > Candle filtersBrand > Pfaudler-w ...