pfaff silberblau used for sale

Chain hoist with electric chassis, trolley PFAFF SILBERBLAU Type PL10 2004B1 Capacity: 2000 kg Lifting height: 3,3,000 kgbr /br /lifting height: 3,000 kgbr /br /lifting height: 3,3,2004B1br /br / 0 m Lifting speed: 4 / 1 m/min Electric chassis type CHM20 Travel speed 20 m/min 1.75 / 0.45 kW voltage: 400 V 3AC, 50 Hz IP55 used, tested ! Dimensions ( without cable ): 650 x 450 x 730 mm

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Garrier width: 260-300 mm -Payload: 2000 kg -Dimensions: 420/290/H240 mm -Own weight: 26 kg

weight max. in kg: 2500 kg fork length: 1150 mm stroke height: 115 mm : 200x50 mm : 80x70 mm : 600 mm : 1230 mm length in total: 1555 mm length in width: 540 mm : 540 mm turning radius: 1275 mm weight: 79 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2500 kg fork length: 1200 mm height of stroke: 115 mm fork length: 1200 mm total power requirement: manuell v. Hand Furnishing: - with tandem rollers - Nylon fork rollers - Rubber swivel castors - Fork width 160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 needle 3-fold transport chain stitch machine with edge trimming

Needle system: 134-35 LR, needle size: 110-150Nm, max. sewing speed: 2800/min, max. stitch length: 8mm, stitch type: 301 (Lockstitch), max. clearance under the sewing foot: 14mm, clear workspace: 270x115mm.

Needle distance: 14mm, number of needles: 2.

1 Nadel-Pfaff 1291-900 column machine with thread cutter, complete with 220 V dc motor Condition: very good (used)

rare zigzag machine with upper transport and 10 mm zigzag oversty completely from standstill with new 220 volt servo motor

2 needle 3-fold transport machine with needle spacing 10 mm

2 needle machine with 3mm needle spacing also suitable for bed inline seams Condition: as good as new (used)

Cylinder arm machine for operations in the cylindrical area with needle transport and large gripper Transport costs nationwide 80 euro plus VAT. Condition: workshop overhauled (used)

Electric winch make PFAFF type BetaMasch. -No: 5/96741800042 Year 1998 Art. -No: FU11402074Capacity 1st positionRope diameter: 8.0 mmRope length: 86.3 mRope speed min.: 1,8 m / min.Rope speed max: 18.2 m / min.Breaking force: 40.5 knTensile load 1. Position: 500 kgTensile load upper layer: 420 kgDrive power: 0.94 kWWeight approx.:80 kgWith- Control cabinet- built on palletused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Spur chain pulley make PFAFF type EcolineArt. -No: 0867005 Test. -No: 03727 Year 1999Lifting load: 2.0 tChain strand: 1Lifting height: 3.0 mHand chain pulling force at full load: 38 kgWeight approx: 26 kgOutside dimensions approx: 185 x 233 x 400 mmWith- short height of construction- Load pressure brakeusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Crane fork Fabr. PFAFF type LM 2/20Fabr. -No: 800471/1 Year 1998Capacity: 2000 kgLoad center distance: 0.5 mFork length: 1100 mmFork width max: 1000 mmWeight: 153 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Description mobile belt conveyor Pfaff 60-3000 from YOC 1998 Gear motor with frequency-controlled speed heavy, structured rubber conveyor belt Bandwidth 60cm Belt length 3000cm 4 lockable transport rollers

modern 3-fold transport machine with servo motor 220 volts and thread cutter

Electric cable winch, cable winch, hoist winch, construction winch, cable hoist, console winch -Handover: in the current condition as seen -Accessories: Winch lever is missing -Manufacturer: Pfaff silver blue, ALU console winch -Type: D 270001 -Wire rope: Ø 5 mm -Cable length: 9 m -Dimension: 330/310/H290 mm -Own weight: 19 kg

Crank winch, Dunkraft, diamond jack, steel winch -Manufacturer: Pfaff, steel winch type 0104000 -Load capacity: 1.5 t -Lifting height: 0.35 m -Number: 4x winch available -Price per piece -Dimension: 740/120/140 mm -Weight: 10.3 kg / pc.

Sewing machine motor, luminous flux motor, electric motor -Manufacturer: Pfaff, sewing machine motor type PKD 321 -Power: 0.245 kW -Speed: 2800 rpm -Voltage: 220/380 V 50 Hz -Shaft: conical Ø 11/15 x 21 mm -Electric light connection: 12 V 15 W. -Dimensions: 340/190 / H320 mm -Weight: 19 kg

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, armored rollers, machine transport rollers -Load capacity: 1000 kg -Type: 4567005 -Dimensions: 500/340 / H105 mm -Weight: 17 kg - only 1 piece available

Three-phase motor, electric motor, Sewing machine motor -comes from a PFAFF sewing machine -Power: 0.25 kW -Speed: 1410 rpm -Shaft: Ø 14 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 230/185/H140 mm -Weight: 6.5 kg

1 x Used 3 meter stroke Delivery possible Please inquire with place and postcode and whether there is unloading possibility. VAT not deductible .

Description: Lifting capacity 2500 kg, lifting height 110 mm, fork length 1200 mm Approx. Onsite Dimension. (l x w x h): 1,400 x 600 x 1,500 mm, weight approx.: 85 kg

Description: Lifting height ,0.115 m Lifting capacity 2 t Approx. Onsite Dimension. (l x w x h): 1,400 x 500 x 1,300 mm, weight approx.: 84 kg

Cable pelletizing machine V-C03 CE and UVV approved, max. 30-50 KG/h, 0.1-30mm diameter of cables, weight 515KG, L 1000 X W 580 X 1,700 mm, 5.18 KW, 1 year warranty, easy to move with heavy-duty castors, available from 12 KW ex location D-57223 Kreuztal. 8.900€ plus 19% VAT

Cutting Machine Fruit & Vegetable Shredder Herb cutter herb cutting machine for e.B. red cabbage, white cabbage, blue cabbage, Used Manufacturer: Gevaar Cutting chamber approx.: 800 mm Rotor/cutting disc approx.: 700 mm Filling flap approx.: 900 x 800 H 300 mm Filling flap adjustable via Pfaff winch Outlet approx.: 800 mm Vector RF60-DV112M-4 Drive Motor 220/380 v, 15.2/8.7 A, 50 Hz Power 4 kW, 275 r/min Total approx.: 2000 x 1200 H 2300 mm Weight: 421 kg Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.

Assembly crane PFAFF 2136007 Capacity: 2500 kg 230cm x 110cm x 180cm lifting height: 1,70m used, tested ! Transport dimensions: 3600 x 800 x 800 mm

General SKU075H315 LocationBarneveld MakeHecht Technologie GmbH Pfaffenhofen Year of construction2008 Main Features MaterialStainless steel Motor2.2 KW Inlet diameter150 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwContainer discharge station (1x) Screw diameter150mm Pitch100mm With hopper/RVS container type 7_192671 Capacity± 650 Ltr Hopper sizes1300x1300x300mm, Conical bottom 900mm Inletcontainer dia. 400mm Outletmetering screw dia. 150mm With motor2,2 KW, 230/400 Volt (Ex) With breaking/mixing shaft(twin shaft breaker above metering screw) Information Mounted on framecheck Floorspace2,5x1,7 M Total height3,0 M Weight1350 KG ATEX compatiblecheck Extra SpecificationsMetering screw mirror polished Technical specs Extra informationconical bottom 900 mm Metering screwsHechtDosing units > Metering s ...