pet preform mold used for sale

Used Complete Bottling Line for PET and Glass 2007 Depalletizer This unit takes bulk of bottles that are stacked on a pallet and places them onto an accumulation area before entering the Lowerator unit. The operation of the machine is manual. There are some forklift interactions with loading full pallets onto the infeed conveyor, removing the empty pallets from the discharge conveyor and the placement of empty pallets at the operator level (layer dividers). Cleaning is carried out with the machine switched off and the hoist lowered. Bottle Lowerator The Lowerator transfer the bottles from the Depalletiser operator level to the lower level Rinser before entering the Filler. This unit is used for glass bottles only and can be mechanically adjusted easily depending on different bottle dimensions. Gripper Rinser Bottle Rinser provides an excellent way to fully clean the bottles. The bottle r ...

Used filling line for water for PET containers 5L 800bph This used filling line for water for PET containers 5L 800bph provides a complete solution for processing 5-liter PET bottles, both round and square. Specijalka from Serbia manufactured the line in 2006. Although the owner disconnected it eight years ago, they confirm that it remains in proper condition. Furthermore, you can inspect the line in dry cycle mode. Technical specifications of the filling line The used filling line for water for PET containers 5L 800bph reaches a nominal output of 800 bottles per hour with 5.0-liter containers. Specifically, the system includes a 10-valve rinser, an 8-valve filler, and a 4-head capper, all integrated in a monoblock. Additionally, a cold-glue labeler applies paper labels. As a result, the setup handles rinsing, filling, capping, and labeling in a compact layout. PET bottle production unit ...

Used Sidel Alsim PET bottling line for carbonated water and drinks - 14.000 bphTechnical Specifications & Performance DataThis complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations.Production speed: 13,000–14,000 bottles per hourContainers: PET bottles, neck finish 28 1881Blow molder: Sidel SBO10, 10 cavitiesPreform handling: Sidel EBH 2050 preform hopperAir conveyor: Sidel-AlsimRinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10KRinser: 48 clamps, 1 water treatmentFiller: 60 isobaric valvesCapper: 10 headsPremix/Mixer: Sidel-Alsim, 30 m³/h outputBottle dryer: ACI ...

Used complete bottling line for CSD in PET and glass - 8000 bphTechnical Specifications & Performance DataThis complete used bottling line is engineered for beverage production with PET and glass bottles. Optimized for water and carbonated soft drinks, it combines reliable filling, labeling, and end-of-line packaging with robust utilities and process equipment. The line integrates components from reputable manufacturers to deliver consistent quality and uptime in industrial packaging environments.Production speed: up to 8,000 bottles per hourCompatible bottle formats: 0.33L, 0.5L, 0.75L, 1.0L, 1.5L, 2.0LContainers: PET and Glass bottlesMain filler/capper/rinser: Sinkrofill 40/50/10/10, 50 filling heads, 3–5 capping headsBlow molder: Easy Blow 4L (4,200 bph nominal)Labelers: Gernep Rollfed 8-480-1RA (foil/OPP) and Gernep Soluta 10-640 3SK (paper), up to 10,000 bphPack & handle applic ...

Technical Specifications & Performance Data The Used Complete PET Line for Flat Drinks Tea is designed to enhance your beverage production efficiency with a remarkable speed of 22,000 bottles per hour. Manufactured in 2001, this second-hand line offers reliable performance with compatibility for various bottle formats ranging from 0.06 L, 0.10 L, to 0.50 L. This line supports PET container types, making it an ideal choice for flat drinks and tea production. Speed: 22,000 bottles/hour Container Types: PET Bottle Formats: 0.06 L, 0.10 L, 0.50 L Year of Manufacture: 2001 Advanced Automation & Control Systems This industrial packaging solution features state-of-the-art automation provided by leading manufacturers such as Krones and others. The integrated control systems facilitate seamless operations with minimal manual intervention, ensuring precision in filling, labeling, and capping proce ...

Technical Specifications & Performance Data The Used Isobaric Complete PET Line for Soft Drinks 6000 Bph, manufactured by BAT, Kosme, and M.A.S, offers efficient bottling solutions for soft drink production. With a production speed of 6000 bottles per hour, this second-hand bottling line is ideal for medium-sized operations looking to enhance their industrial packaging processes. Bottle Formats: 0.06 L and 0.10 L Container Types: PET Production Year: 2004 Current Status: In Storage Advanced Automation & Control Systems This complete bottling line features sophisticated control systems to ensure seamless operations. The automation level allows for precise control over the filling, labeling, and capping processes, enhancing the overall efficiency of beverage production. Equipped with essential safety features, operators can be confident in smooth and safe production runs. Manuals are avail ...

Used Filling Line Sidel For Water 2014 Air Compressor ABC 3HA-4-TFK-LT 200kw Air compressor Low Fusheng SA75 75KW Ice water Machine Nanjing Wuzhou LSBLG 1290DT 1256.8KW 298.8KW Ice water machine Shanghai Baoqing WA-78W/PT4EN-I 49kw Blow Molding Machine SIDEL/SBO20 Blower Capacity：36000P/H Power：406KW Spindle heads 262 pcs Manipulator 10pcs/each Blow moulding satation 20 pcs SIDEL Filling Machine Capacity： 36000P/H Power： 35KW Filling Valves 60pcs Capping heads 15 pcs SIDEL 36000 bph Labelling Machine Capacity： 600B/min Power： 50KW Vacuum drum 1 set Scaleplate 2 pcs Capping heads 20 pcs SMI Shrink Wrapper Capacity： 35 P/Min Power： 75KW Divider： 4 sets Infeed： 4 sets Former 5 sets TW Benifit Palletizer with Conveyor and Divider Capacity： 35 P/M Power： 25KW Used Filling Line Sidel For Water 2014, this complete line for water is in  ...

Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical con ...

Unused; in a box; manual; Engine: 2-stroke; Displacement: 65 cc; Rated power speed: 12000 rpm; Fuel tank volume: 550 ml; Oil tank volume: 260 ml; Bar length: 60 cm; Chain pitch: 0.325\"P; Oil gasoline mix ratio: 01:40 ; 4891 Auction-ID: A1-47029-1200

2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-47029-321

Unused; in a box; manual; Engine: 2-stroke; Displacement: 65 cc; Rated power speed: 12000 rpm; Fuel tank volume: 550 ml; Oil tank volume: 260 ml; Bar length: 60 cm; Chain pitch: 0.325\"P; Oil gasoline mix ratio: 01:40 ; 4891 Auction-ID: A1-47029-12

General information Condition: Unused (kit) Fuel: Petrol Engine Displacement: 452 cc Engine type: OHV Number of cylinders: 1 (with cast iron cylinder liner) Starting system: Electric Fuel tank: 7.5 litres Transmission Type: Hydrostatic Max. forward speed: 8 – 10 km/h Max. reverse speed: 4 – 6 km/h Chassis Front tires: 15 × 6.00-6 Rear tires: 18 × 8.50-8 Turning radius: 55 cm Cutting deck Cutting width: 98 cm Max. working area: 5000 m² Material: Steel Collector: 250 litres Cutting height: 30 – 90 mm Number of cutting height positions: 7 Blades: Twin blades Auction-ID: A1-47029-1

Drilling length 1000mm; drill diameter 200mm; tank capacity 1050ml; engine speed 8500rpm; 2 stroke; 52cc; 6170 Auction-ID: A1-47029-39

2 Fuel Canisters 5L made of extra sturdy plastic with cap and pouring adapter Auction-ID: A1-47141-17

Unused; in a box; manual; Engine: 2-stroke; Displacement: 65 cc; Rated power speed: 12000 rpm; Fuel tank volume: 550 ml; Oil tank volume: 260 ml; Bar length: 60 cm; Chain pitch: 0.325\"P; Oil gasoline mix ratio: 01:40 ; 4891 Auction-ID: A1-47029-1203

2 Fuel Canisters 5L made of extra sturdy plastic with cap and pouring adapter Auction-ID: A1-47141-4

Unused; in a box; manual; Engine: 2-stroke; Displacement: 65 cc; Rated power speed: 12000 rpm; Fuel tank volume: 550 ml; Oil tank volume: 260 ml; Bar length: 60 cm; Chain pitch: 0.325\"P; Oil gasoline mix ratio: 01:40 ; 4891 Auction-ID: A1-47029-1202

2 Fuel Canisters 5L made of extra sturdy plastic with cap and pouring adapter Auction-ID: A1-47141-6

2 Fuel Canisters 5L made of extra sturdy plastic with cap and pouring adapter Auction-ID: A1-47141-10

Equipped with chain and protective cover. Stihl petrol chainsaw 30cm Type: Stihl-MS 162 Auction-ID: A1-47084-75

2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-47029-319

In its original box. Never used. Carton size: 58 x 44 x 47 Auction-ID: A1-46992-11920

2 Fuel Canisters 5L made of extra sturdy plastic with cap and pouring adapter Auction-ID: A1-47141-15

2 Fuel Canisters 5L made of extra sturdy plastic with cap and pouring adapter Auction-ID: A1-47141-11

2 Fuel Canisters 5L made of extra sturdy plastic with cap and pouring adapter Auction-ID: A1-47141-2

In its original box. Never used. Carton size: 58 x 44 x 47 Auction-ID: A1-46992-10850

Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/petrol mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, Start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-47249-362

2 Fuel Canisters 5L made of extra sturdy plastic with cap and pouring adapter Auction-ID: A1-47141-20

Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/petrol mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, Start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-47249-363

2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-47029-320

Drilling length 1000mm; drill diameter 200mm; tank capacity 1050ml; engine speed 8500rpm; 2 stroke; 52cc; 6170 Auction-ID: A1-47029-38

2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-47029-318

2 Fuel Canisters 5L made of extra sturdy plastic with cap and pouring adapter Auction-ID: A1-47141-26

Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/petrol mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, Start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-47248-362

2 Fuel Canisters 5L made of extra sturdy plastic with cap and pouring adapter Auction-ID: A1-47141-13

Equipped with chain and protective cover. Stihl petrol chainsaw 30cm Type: Stihl-ms162 Auction-ID: A1-47084-295

In its original box. Never used. Carton size: 58 x 44 x 47 Auction-ID: A1-46992-11200

Unused; in a box; manual; Engine: 2-stroke; Displacement: 65 cc; Rated power speed: 12000 rpm; Fuel tank volume: 550 ml; Oil tank volume: 260 ml; Bar length: 60 cm; Chain pitch: 0.325\"P; Oil gasoline mix ratio: 01:40 ; 4891 Auction-ID: A1-47029-1201

In its original box. Never used. Carton size: 58 x 44 x 47 Auction-ID: A1-46992-12050

2 Fuel Canisters 5L made of extra sturdy plastic with cap and pouring adapter Auction-ID: A1-47141-8

Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/petrol mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, Start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-47248-363

unused; in the box; manual; Engine: 2-stroke; Displacement: 25.4 cc; Rated power speed: 7000 rpm; Fuel tank volume: 450 ml; Bar length: 78 cm; Teeth gap 28mm; 8351 Auction-ID: A1-47029-14

unused; in the box; manual; Engine: 2-stroke; Displacement: 25.4 cc; Rated power speed: 7000 rpm; Fuel tank volume: 450 ml; Bar length: 78 cm; Teeth gap 28mm; 8351 Auction-ID: A1-47029-18

Used Complete Krones PET Bottling Line – 22,000 BPH – OverviewUsed Complete Krones PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET.Technical Specifications & Performance DataManufacturer: Krones and GEAYear of manufacture: 2010Working hours: approx. 47,000Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 ...

Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Complete control CC 90 for ENGEL injection moulding machines