We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,319 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
used
used
used
used
used
used
used
Foellmer ME 45/EX; good condition; Working width 450mm; short and long investment table; Tool for groove and perforate; Foot switch; Zaehler.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
Bickel HK 3/50; good condition; Working width 500mm; Stand model; with slot and perforating tool; Foot Switch. ; ready to go. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
Producer: W&H (perforating type) Type: Matador S1 Bag width: 50-260 mm. Tube length: 120-540 mm. With 4 colour print
used
N & P (NUMBERING & PERFORATING) UNIT FOR OFFSET PRINTING MACHINE HB GTO 46 + Format (cm): 32x46 All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures)
used
N & P (NUMBERING & PERFORATING) UNIT FOR OFFSET PRINTING MACHINE HB GTO 52 + Format (cm): 32x52 All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures)
used
used
used
used
CREASING– PERFORATING TOOL FOR ADAST-DOMINANT AD725 PAN ( + VERSION) Available: immediately
used
DIRECTLY FROM THE PRINT SHOP Offer consists of: Horizon Smartslitter SMSL - 100 Cutting, creasing, perforating in longitudinal and transverse direction SMSL-100 SMSL-CA SMSL-PR longitudinal perforation unit PRF-36 SMSL-CV SMSL-ST Card Stacker - 3 functions in one operation - Total running time: only 61 hours - Control: TouchScreen - Feeder: Flat stack feeder -Format: - Sheet format max. = 370 x 670 mm (unprocessed) - Sheet format min. = 210 x 210 mm (unprocessed) - Sheet format max. = 370 x 670 mm (machined) - Sheet format min. = 48 x 50 mm (machined) - Paper weights: - Uncoated: 80 - 350 g/m2 (80 - 200 g/m2 with PRF-36) - Coated: 100 - 250 g/m2 (128 - 256 g/m2 with PRF-36) -Equipment: - Pressure offset correction by brand reading by camera - Optimal setup of PDF or JDF data via PC - Recognition of register marks, 1D and 2D barcodes by camera - ...
used
Offer consists of: - High-performance finisher DocuCutter DC-745 Duplo DocuCutter DC-745 High-performance finishers for digital color printing: - Investors: Suction/blowing air feeder with alignment line - Operation: via LCD display - PC included - Software included - Business card module - Job memory: 80 memory slots for retry jobs - Error avoidance: Ultrasonic double leaf control Control compartment Test running program Print mark reading - integrated knife 6x 2x Edge cut 4x for card cutting - Format: max. 650x370mm min. 210x210mm - Paper weight: 110-350g/sqm - Speed: 50 sheets/minute - Current: 230V / 50Hz / 2.7A, 550W - Dimensions: 3.040x1.020x1.115mm - Weight: 450kg On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing o ...
used
Enveloper feeder Schneider SF 80; Shed investors; good condition; cleaned and tested; format max.360x360mm, min.100x100mm; Max. Speed. 15000/hr; Height adjustable; optional with delivery belt A20. Envelope feeder Schneider SF 80; good condition; cleaned and checked; size max. 360x360mm, min.100x100mm; max.speed 15000/h; adjustable hight; for option with delivery belt A20.
used
Creasing & Perforating machine Kroll Model 700 Year 1960´s Working width 700 mm Tools some tools, but not worth mentioning Available direct
used
Lateral Perforating Unit GTO 46 (EXTRA TOOLS) • incl. numbering shaft • 2 extra perforating knives (unused)
used
Spare part for Heidelberg GTO 52 Lateral Perforating Unit • nr. 69,731,800 K01 • incl. numbering shaft nr. 69.431.370
used
Bickel MPA 65 Electronically controlled Stamp Perforating machinePerforation of postal stamps, tokens, calendars. Size 900 x 650 mm with lot of tools.SCC control and positioning over monitor. Automatic central greasing. List of tools: base tools - 35,5 mm 48,28 mm 24,14 mm Perforation only with line: 48,28 mm round (big)- Ø35,5 mm 35,5 mm round (small) – Ø24,14 mm 48,28 x 40,53 mm shape of hart 48,28 mm with protection of romb 35,5 mm with protection romb Closed sizes: 48,28 x 24,14 mm 35,50 x 25,56 mm 35,50 x 29,82 mm Age: 1992 Machine tehnicaly controled/ checqued. Cleaned. With machine there is automatic delivery and jogger.
used
Year of construction unknown Impression unit with numbering and perforating device suitable for GTO 52 4 numbering units, 7 digits, counting forward Perforating device vertically Delivery date: immediately from stock Price on request. We deliver and install worldwide!
used
Condition: Very good condition
used
Ref. 449 Groove and perforation machine " Max Mohrstedt, BERLIN C. 19 " Built around 1900 Working width approx. 60 cm Groove and perforating comb weight 210 KG Condition: Tested, Functional / Perforating comb usable length approx. 55 cm
used
Standard
used
Enveloping feeder Schneider SF 80; shed feeder; good condition; cleaned and tested; Format max.360x360mm, min.100x100mm; .max. Speed. 15000/hr; height adjustable; with delivery conveyor A20. Envelope feeder Schneider SF 80; good condition; cleaned and checked; size max. 360x360mm, min.100x100mm; max.speed 15000/h; adjustable hight; with delivery belt A20.
used
M. No.: 1253 Format (cm): Min. 10×15 / Max. 50×70 Sheet weight 80 to 400 g.s.m. Equipment / Additional information: Grammage: 60 - 600g / m² Voltage: 400 V / 50 Hz
used
DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consists of: - High-performance finisher DocuCutter DC-645 Duplo DocuCutter DC-645 High-Performance Finisher for Digital Color Printing: -Investor: Suction/blowing air feeder with alignment section - Operation: via LCD display - Control: Barcode control - PC included - Business Card Module BCM-54 54mm - Longitudinal perforation PFM-01 - Job memory: 80 memory locations for repeat jobs - Error prevention: Ultrasonic Double-Blade Control Dowry compartment Test Run Program Print Mark Reading - Built-in blades: 6 longitudinal knives + 1 cross-blade -Format: max. 650x370mm min. 210x210mm - Paper weight: 110-350g/sqm - Loading capacity: 100mm - Grooves per sheet: max. 10 -Vel ...
used
Width 68 cm Built in 1963 Grooving and perforating machine electr. Drive Foot switch incl. base frame Price on request. We deliver and install worldwide!
used
max. paper width: 68 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. paper width: 68 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
unknow A9020411 (12-14)-
used
Operator Panel
used
unknow GE.570205.0002.00, part of the set-
used
Main Rack
used
BARCO HULPFUNCTIE 16 DIG OUTP
used
BARCO FLOPamp;KBRD INTF MNC95
used
Gear testing machine with chart recorder and electric drive manufacturer: unknown machine is designed for the inspection of gears accessories various module pins and mandrels has various hand cranks and adjustable settings and also an electric drive, with chart recorder you can see various rashes. in the camp under current vorfuehrbar, unfortunately no manual available. Are sold without any warranty
used
Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.
used
Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Make : TREPKO Model : PKG 1S Cups : 8 Circles pre Minute : 32-40 Cup Sizes : 75 and 95mm Filling Volume : 50gr -500gr Stations : Cup denester - Filling - Aluminium Placing - Heat Sealing - Conveyor Condition : Good HEPA Filter Mounted Closed Cabin Safety Switches Control Panel Available : Immediately
used
Cup filling and sealing machine 67/95mm YOM 2014. As new, Only been used for a week.
used
TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250
used
TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340
used
Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
used
Flexipak Refurbished 3 years ago Speed : 1800 c/h on 125 g Cup dimensions : 73mm and 95 mm Comprises pot drop, liquid fill, lid drop, heat seal, over lidder Motorised 3 metre conveyer Heated 30 litre feed tank with stirrer.
used
Make : TREPKO Model : 222 KPS Year Of Manufacture : 2004 Machine Dimensions : 1,35 x 1,55x 3,32 metres with conveyor 3,2 meters Product : Butter / Margarine/soft products Cup Dimensions : 115 mm x 75mm Volume : Min 180ml | Max : 500ml Cleaning : CIP Hours : 688,45 Plastic Cup With Aluminium Lid and Cover Cap Condition : Good
used
Make : Regal Model : 9000 YoM: 2004 Refurbished in 2018 Current Cup Dimensions: 71 mm ( This can be changed on request) Speed : 2400 Cups per Hour Stations : Cup Dispenser- Filler - Aluminium Lid - Sealing - Outfeed conveyor Controls : Very Good condition Available : Immediately after service Location : Dairy Machinery UK