pelletizing used for sale

Stock - No.: 2166 1 used, in 2019 partly overhauled and tested film/foil/regrind pelletizing extrusion line EREMA type RGA 50 T equipped with: 1. cutter / densifier unit, new motor with 18,5 kW tangential ( T ) cutter - Ø 550 mm 2. Extruder single-screw Ø 50 mm – 20 LD motor 18,5 kW – NEW Frequency Converter 3. screen pack changer sieve- Ø90 mm with hydraulic unit-new 4. watering-granulation unit HG, pelletizer drive 0,75 kW 5. pellet drying vibrating dewatering unit GS 1000/200 6. control board ( new converter ) The line is ready for operation, date shortly in our workhsop Wuppertal-Germany. More regranulation-pelletizing lines ex stock available, ask for our actual machine-list or visit us

Freshly Revised Koller to CPM Press 3022 or 7022 , Fshbone, 2 new bearings, new sleeve, new intermediate ring, filled with grease. rest used. Koller are no longer needed due to machine changes. 3 pieces Available

Collier sleeves Fishbone CPM 16-2.5

Graf Kollerhülsen Geriffelt to CPM Pelletpress

l 90 kw POWER 1350 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 500 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control of the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 90 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

Graf Koller sleeves punched for CPM 16-2.5 Pelletier press

Collier sleeve Fishbone CPM 22-2.5 for pellet press

Koller sleeves Geriffelt for CPM 22-2.5

Koller sleeves punched for CPM 22-2.5

L 22 Kw POWER 330 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 22 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

This press from Collin at Plastima Used Machinery in machine storage. The machine is from 2001 and is in good condition. – Brand: Collin Pilot & Lab Solutions – Model: P200P – Construction year: 2001 – Plate Size: 200 x 200 Mm – Max. pressing force: 196 kN

Cutter Compactor Plastic Recycling Pelletizing System The ACS-H TM series compacting and pelletizing system combines function of crushing, compacting, plasticization and pelletizing to One step. Applied in the plastics recyclng and pelletizing process. ACS-H TM system is a reliable and efficiency solution for plastics film, raffias, filaments, bags, woven bags and foaming materials re-pelletizing.Lower investment for a high performance machine. It can provide higher output but with lower energy consumption. Application: PE,PP,PS,ABS,XPS,EPS,PVB.

Stock No.: 2107 1 used, partially overhauled and function-tested strand granulator with >> Granules Cutting Lengths Adjustment ( SV ) Manufacturer COMAC - Italy Type SG-100 SV Strand inlet width 100 mm cutting rotor width 110 mm, Parallel section rotor with 32 teeth Rotor Ø 200 mm >> strand pellet cutting length adjustment 2 drives: 1x for cutting rotor - 4 kW 1x for feed roller 1.5 kW with STOBER reduction gear Soundproof housing of the pelletizing chamber Visit / test run possible shortly by appointment. We also have matching strand cooling basins, strand blowers and classifying screens available from stock. Further strand granulators and other pelletizing systems/plants available from stock ( water ring - , hot impact and underwater pelletizing )

Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal.  ...

Key data: 100 , 140

Stock No.2452 1 used, partially overhauled and functionally tested pelletizing line Throughput up to 500 kg/h depending on the material, consisting of: Tamping unit Kreyenborg SW 100, drive 7.5 kW Extruder BKG single screw Ø 100 mm – 35 LD, Drive 132 kW – AC frequency controlled Screw speed up to 143 rpm.-1 screw depth 14 mm Heating capacity approx. 35 kW installed 1x athm. Degassing zone Screen-pack-changer Double piston Kreyenborg K-SWE 160 RS back-flush self-cleaning with screen surface 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. Hydraulic station Granulator with drive 4 kW Water pump 2.2 kW By-pass system, water tank with heating 9 kW installed and heat exchanger BKG granulate centrifuge TWE 300 with drive 3 kW pellet classifier table Control board and Siemens material feed conveying, big-bag filling station � ...

Stock No. 2587 1 used pelletizing plant, functionally tested, Throughput up to approx. 600 kg/h depending on the material, consisting of: 1 volumetric dosage Extruder Plastmachines Type PME 100 Single screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backwasher incl. Hydraulics 3 kW Strand head with holes 20 x Ø 3.5 mm Continuous cooling pool 400 x 4000 mm with strand guide rollers Strand extraction Strand pelletizer SG 300 ResoTec control / control cabinet Viewing by arrangement - at short notice More pelletizing lines / extruders available from our Wuppertal plant & ready for demonstration

ID2999 RUF RB30/3000/100 year/Year of construction 2004 4680 hours/hours Pelletizing machine, with hydraulic unit and control Pelletizing machine, with hydraulic unit and control unit

Manufacturer: OFFICINA MECCANICA PREALPINA S.R.L Type/Model: T.60 L/D 35 with vent Year: 1995 Motor : 45 KW AC Condition: in good working condition Hours :20933 Screw diameter: 60 mm, recently refurbished Hour meter: 20933 Capacity of 70÷100 kg/h Pelletizing line suitable for the recycling of grinded rigid plastic materials PE, PP, PC, ABS, ABS/PC Line composition: - Single extruder - rigid materials dosing unit - die head-spaghetti - filter Cresta Ø 90 mm - hydraulic screenchanger semi-automat without interrupting the extrusion - degassing pump - cooling water bath - Electrical equipment of control and command with cooling - Sheer pelletizing unit SGS 100

Stock - No.: 1820 1 used, overhauled CUBE DICER as type Sagitta - LANCELIN BG 200 working width 200 mm drive 7,5 kW – NEW cutting tools 4 x 4 x 3 mm cube pellets incl. pneumatic infeed roller system More pelletizing equipment ex our stock Wuppertal Germany available, Ask for our most recent stock-list or visit us

Wood pelletizing plant, KAHL pellet press used the complex includes: Pellet press AMANDUS KAHL Matrice diameter approx. 1000 mm Pallet diameter approx. Ø 8 mm 5 Koller approx. Ø 340 x 130 mm Motor power 160 kW an auxiliary motor is damaged, but can be replaced by us Dimensions approx. 1600 x 1800 x 3000 mm + motor Weight approx. 8000 kg Conditioner / Dosing and Mixing Screw Diameter approx. Ø 400 mm 5.5 kW Dimensions approx. 3100 x 900 x 800 mm Single shaft paddle mixer Dimensions approx. 3300 x 1600 x 2000 mm + gear motor Pellet coolers Dimensions approx. 2300 x 2300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Stock - No.: 1624 1 piece used strand pelletizer PREVIERO > adjustable cutting length type TA 200 NA year 1996 – partly overhauled in 2020 drive 4 kW + 0,37 kW 200 mm cutting width new control board FU controller We have more strand-pelletizers, waterring or underwater pelletizing units available ex stock Wuppertal Germany, You´re welcome to visit us. Please find our stock-list on the Homepage: plastictrading

Screws: 2x x 58 mm / 26D Engine: 250 kW DC Capacity: approx. 800 - 1000 KG Material: PE, PP, PS, ABS // Details: DC motor, concurrent, segmented screws and cylinders (2x x 58 mm / 26D), screw speed: max. 900 rpm, degassing, vacuum pump, BKG underwater pelletizing system OPTI-LINE 1 consisting of: Kreyenborg start-up, water box, cutting head, water circulation system, heat exchanger, process water tank, centrifugal Control: Siemens S7 with visualization

Diebel RMH 18/45 pelletizing system for cables, plastic Manafacture: Diebels Type: RMH 18/45 Year of construction: 2011 Drive: 7.5 kW Filling opening: 460 x 225 mm Rotor diameter: 180 mm Sieve hole: 4 mm Replacement screens: 2 pieces, 2 / 3 mm Throughput (plastic): 60-80 kg/h Weight: 320 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

For sale is a functioning pellet production line including controls. The plant is suitable for pelletizing agricultural raw materials (straw/hay/alfalfa etc.) and has an output of 1000-1600 kg/hour depending on the material. The complete system has approx. 800 operating hours The production line is composed of: cjffolp2bh Byfo0wxd Bale breaker 37 KW + bale conveyor table 10m and Hammer mill 75 KW Zyklon + Rotary Valve + Buffer Tank Scheuch dust filter house with control system and a capacity of 20,000m3/h including discharge for big bags, 2 Koller ring matrices pellet mill 110 KW with aut. Central lubrication. In the associated conditioner, the moisture content of the material is automatically controlled by means of a dosing pump and mist nozzle as well as a microwave sensor from the Envea brand. Pellet cooler with level sensors and automatic emptying. Vibrating scr ...

There is a complete underwater pelletizing system with vibrator, heat exchanger, centrifuge, extruder, pelletizer, water basin, sieves, knife blocks, documentation and other spare parts available, a sieve changer is available separately, an inspection is possible.

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

Project: PE film pelletizing line Raw material & formula -HDPE video Final product--HDPE granules, 3-5mm Output capacity--450~550kg/h, depends on condition of client's material. Coplete ofert is under the link: file:///C:/Users/Marcin/Desktop/krowy/Ofert%20granulacji%20ACS120..htm

OMP PREALPINA 180 mm. 35 L/D, for HDPE LDPE LLDPE PC PP PS ABS, Constructed in 2002, The line includes:, (OPTIONAL - Buffer silo with agitators and feeding auger), forced feeding unit, extruder with 180 mm screw 35 L/D, vacuum degassing system, 415 kw drive, semi-automatic screen-changer with 300 mm diam. screens., water ring pelletizing unit, drying centrifuge, vibro-classifier, electric cabinets for managing the line, throughput rate 1.000-1.400 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Running until October 2023, Available RECONDITIONED (various steps meeting your budget), Available with FULLY AUTOMATIC SCREENCHANGER on request., See how we recondition [HERE](https://www.germanplast.eu/pages/what-we-do), ask for video of the line running

Key data: 100

Extruder 2 spindles for pelletizing (Pelletize). Brand: Maphree, 100 mm Ø, 15 L/D, engine: 30 Kw (40 hp). With forced feeding, air head cutting, pellet cooler, complete electric cuandro.

PREALPINA 85 mm. 35 L/D, for HDPE LDPE LLDPE PC PP PS ABS, The line includes:, Buffer silo with agitators and feeding auger, forced feeding unit, extruder with 85 mm screw 35 L/D, vacuum degassing system, semi-automatic screen-changer, water ring pelletizing unit, drying centrifuge, vibro-classifier, electric cabinets for managing the line, nominal throughput rate 180.240 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Constructed in 1995, The line is offered RECONDITIONED, Running until October 2023, Available AS IS or RECONDITIONED (various steps meeting your budget), Available with FULLY AUTOMATIC SCREENCHANGER on request.

Extruder with screw diam. 60 mm.35 L/D, for LDPE HDPE LLDPE PP PC PS ABS EPS EPE XPS Complete with scrap silo with agitators on bottom Connecting screw to crammed feeder Crammed feeder with vertical screw extruder with 60 mm screw 35 L/D n.1 vacuum degassing pump Semi-automatic non stop hydraulic screenchanger Water ring pelletizing unit Drying centrifuge Vibro classifier electric cabinet Total installed power 86 kw Used 50 kwh Average production rate 110-150 kg/h depending on material and feeding rate The line is offered as is or reconditioned

1) Wood pulveriser input 12mm out put 150mesh 2) hot mixer max temperature 120dg capacity 100 kg per pach(15 mints each pach) 3) PE pruvolizer (from granules to powder) capacity 200 kg per hour 4) Crusher capacity 500 kgper hour 5) Wpc pelletizing extrotion line capacity 300 kg per hour 6) Extrusion line to make wpc wall and decking capacity 42 mters per hour including cooling table and cutting table and dropping area. This factory includes all the necessary tools and accessories, it is almost new in condition, built in 2021. It has produced 5000sqm of product

Key data: 130 mm, 35 , 600 U/min

Material: PE, PP, PS, ABS Details: DC motor, segmented screws and barrels, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors. Control cabinet for heating and motor control (NEW. Siemens S7) Screw Ø: 2x 130 mm L/D: 35:1 Motor: 500 kW (DC) Optional: side feeding, screen changer, GALA underwater pelletizing

The line is offered TOTALLY RECONDITIONED., PREALPINA EXTRUDER 180 mm. 2 degassing points, for LDPE HDPE PP PS PC ABS EPS EPE EPS XPS..., average throughput rate 800-1.200 kg/h depending on materials and feeding rate Including: Buffer silo with agitators and feeding auger. Forced feeding unit. Extruder with 180 mm bimetallic screw 40 L/D Double vacuum degassing system a.c.355 kw a.c.drive controlled by ABB inverter Semi-automatic non-stop screen-changer with 300 mm diam. screens., FULLY AUTOMATIC NEW SCREEN-CHANGER AVAILABLE (+200 K€ +/-) hydraulic power pack Water ring pelletizing unit. Drying centrifuge., water re-circulating tank, Heat exchanging unit on gearbox group + cutting unit. Vibro-classifier., Control panel with touch screen Electric cabinets for managing the line, Constructed in 2006. Total installed power 650 kw, average used in work 420 kw User’s manuals, drawings, CE. ...

For Sale: Complete Extruder Line Manufacturer: Union Type/Model: Ø 120 LD 42 Year: 1998 Motor: 147 kW DC variable speed Condition: in good working condition Water ring palletizer Screw diameter: 120 mm, Screen changer: OMP PREALPINA Year 2013 like new Screen changer type: hydraulic, Ø 300 mm Degassing System: atmospheric degassing Capacity of 300÷500 kg/h, depending on the type of material and MFI Pelletizing line suitable for the recycling of grinded rigid plastic materials PE, PP, PS, ABS Spare parts: 3 screws second-hand Control panel

Cable pelletizing machine V-C03 CE and UVV approved, max. 30-50 KG/h, 0.1-30mm diameter of cables, weight 515KG, L 1000 X W 580 X 1,700 mm, 5.18 KW, 1 year warranty, easy to move with heavy-duty castors, available from 12 KW ex location D-57223 Kreuztal. 8.900€ plus 19% VAT