pellet used for sale

Diebel RMH 18/45 pelletizing system for cables, plastic Manafacture: Diebels Type: RMH 18/45 Year of construction: 2011 Drive: 7.5 kW Filling opening: 460 x 225 mm Rotor diameter: 180 mm Sieve hole: 4 mm Replacement screens: 2 pieces, 2 / 3 mm Throughput (plastic): 60-80 kg/h Weight: 320 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Valve bag packer including load cells for dosing and packing of bulk material, granulates such as grain, cereals or pellets. AMTEC?S valve bag packing machine fills up to 25kg of the bulk material into valve bags. Dosing of the material by load cells. - Specifications: Weighing range: max. 25 kg | max. speed of machine in neutral: 150 cycles/hour | accuracy: +/- 0.5% FS | compressed air: 4-6bar | current: 380/220V, 3P | product contact parts form SUS 304. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Vertical weighing and filling system for pre-made large bags/sacks. Suitable for granular products such as seeds, pet food, wood pellets etc. The system includes product feed, automatic weighing unit, conveyor belt and sealing OR sewing module. The pre-made bags are manually clamped into the pneumatic clamp support by hand. The product is dosed by weight and filled into the bag. The bag is then by conveyor belt to the sealing or sewing module for sealing or sewing. - Specifications: Weight range: up to max. 25kg | max. speed of the machine in neutral: 200 bags/hour | accuracy: ?0.2% FS | power: AC 220V/380V, 50Hz, 2kW | compressed air: 6bar, 0.17 m? | product contact parts are made of AISI 304 stainless steel | dimensions of the system depend on the final layout, can be customized. That machine/system is available in different versions for different packaging sizes and with different pac ...

Stock No. 2587 1 used pelletizing plant, functionally tested, Throughput up to approx. 600 kg/h depending on the material, consisting of: 1 volumetric dosage Extruder Plastmachines Type PME 100 Single screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backwasher incl. Hydraulics 3 kW Strand head with holes 20 x Ø 3.5 mm Continuous cooling pool 400 x 4000 mm with strand guide rollers Strand extraction Strand pelletizer SG 300 ResoTec control / control cabinet Viewing by arrangement - at short notice More pelletizing lines / extruders available from our Wuppertal plant & ready for demonstration

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

Key data: 60

Extruder 1 spindle: 60 mm Ø 32 L/D, Amut brand, variable speed motor Elektra Faurndau: 7 to 24 KW, with electrical panel and wire head for pellets: 23 holes and electrical panel.

Key data: 120

Extruder 1 spindle for manufacture of pellets. 120 mm Ø, 35 L/D, brand name: FBM ( Falzoni), type: ETF 120 V 380/5L, year: 1988. Engine: 200 KW. Degasifier and filter changer. Head cut under water, year: 2006, brand: PRT and force-feeding silo.

Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal.  ...

Equipment for plastic recycling Co-Extrusion system composed of two double spindle extruders BAUSANO MULTIDRIVE system 4 x 2, Series 92-BGP-5031. Year 1.985 - Its general condition is excellent, it has always had a permanent and impeccable maintenance. Suitable for the treatment of virgin materials and those from thermoplastics recovered from HDPE, LDPE, PS, PP, UPVC, PVC, and also for the manufacture of polymeric alloys such as the composition of PC + PAY + PB + Fiberglass, etc. Also the Composition of: PP, PAG, Fiberglass, Alloys with sawdust, nut shells, natural fibers and the like. You can also work only with the main extruder, in which case the production would drop only 30/40% The MULTIDRIVE transmission system, with corrotating spindles and four efficient motors, is a reference technology in the world of extrusion, guaranteeing the highest quality and precision, even in ...

Key data: 130

Granceado line (pelletized) Extruder 1 spindle, brand: Previero Sorema 130 Ø 35 L/D, motor: 250 Kw with variable speed drive. Degasser, hydraulic filter changer: 215 mm, overhead cutting to water, centrifuge, discharge cyclone, tromel: 1 m, rotary valve, solids transport vacuum cleaner. Forced feeding with silo: 11,000 l. with remover. Exit cyclone for dust.

Screening machine | Vibrating Screening Machine Type ASM-300 New machine | Demonstration machine - Make: S&F GmbH - Type: ASM-300 - Design: TOP LINE - Screening capacity: approx. 35 - 40 m³/h (for wood chips and sawdust) - Screening area: 3.0 m² - Fractions: 3 pieces - Screen decks: 2 pieces - Drive power: 2.2 kW - Machine weight: approx. 1,900 kg - Machine colour: RAL 5002 Ultramarine Blue - Screen inserts freely selectable Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibrating screen | Wood chip sieve | Vibrating Screening Machine | Flat sieve | Vibrating screen | Roller classifier | Screening machine for wood chips Screening Machine | Oscillating Screen Type ASM-300 New machine | Demonstration machine - Make: S&F GmbH - Type: A ...

Cutter Compactor Plastic Recycling Pelletizing System The ACS-H TM series compacting and pelletizing system combines function of crushing, compacting, plasticization and pelletizing to One step. Applied in the plastics recyclng and pelletizing process. ACS-H TM system is a reliable and efficiency solution for plastics film, raffias, filaments, bags, woven bags and foaming materials re-pelletizing.Lower investment for a high performance machine. It can provide higher output but with lower energy consumption. Application: PE,PP,PS,ABS,XPS,EPS,PVB.

Project: PE film pelletizing line Raw material & formula -HDPE video Final product--HDPE granules, 3-5mm Output capacity--450~550kg/h, depends on condition of client's material. Coplete ofert is under the link: file:///C:/Users/Marcin/Desktop/krowy/Ofert%20granulacji%20ACS120..htm

Hop Cannon Braukon HopGun 325 liters – 2014 Good condition hop cannon for dry hopping, also referred to as cold-hopping, made by German BrauKon in year 2014. Hob volume 325 liters and it has been used for hopping beer in 150hl fermenters. Dry hopping is a procedure where essential oils are released from the hops pellets to cold, unmature beer by circulating beer from fermenters through a hop cannon. It provides better efficiency and quality, reduced dissolved oxygen (DO) levels in the finished product, and a safer working environment for the brewers. Once pellets are loaded in, air gets purged out with CO2/N2. Beer is pumped into the cannon under pressure, the hops pellets are caught in a whirlpool of sorts inside the cannon vessel and dissolve to create a pungent slurry. This mixture of beer and hops is then pumped from the hop cannon back to the fermentation vessel, and the b ...

Key data: 120

Extruder 1 spindle (pelletizer). Brand: Flag, 120 mm Ø, 25 L/D, engine: 100 hp. Variable speed drive, hydraulic filter changer: 120 mm, air head cutting, venturi screen and big-bag.

PRT RECYCLING EXTRUDER for PE PP PC PS ABS, Extruder with 85 mm screw, 30 L/D, 60 kw d.c.Siemens drive 2.200 rpm, Average throughput rate 200 kg/h, depending on materials and feeding rate, Total heaters power 38,6 kw, N.1 vacuum degassing pump, non stop or manual screenchanger, Water ring pelletizer, Drying centrifuge, Total installed power cutting group 14 kw, vibro classifier, Electric cabinet (new), Total installed power 115 kw, used in work abt 75 kw, Total weight about 3 Tonnes, New in 1999, This extruder is ofered totally reconditioned, (photos are of a twin machine just reconditioned and sold), AVAILABILITY: 6 working weeks from confirmation

TECNOVA MONO SCREW EXTRUDER 130 mm 54 L/D double degassing system For LDPE HDPE PP PC PS ABS, Average output 400/600 kg/h depending on material and feeding rate, Total installed power 530 kw, – about 318 kw used in work Construction year 2015 Screw diam. 130 mm 54 L/D Bi-metallic barrel A.c. motor 200 Kw + inverter Double degassing system (degassing points about 2 mt.apart for excellent results) non-stop screen changer with diam.300 mm screens AVAILABLE FITTED WITH FULLY AUTOMATIC SCREEN-CHANGER NEW or USED Hydraulic pack Vented electric cabinets Water ring pelletizer Stainless steel centrifugal drier Vent The line is offered TOTALLY RECONDITIONED Find out on our how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), possible addition of vibro classifier, bag filling/weighing station, upstream equipment, Availble on request: scrap silo + auger + crammed feeder, [h ...

OMP PREALPINA 180 mm. 35 L/D, for HDPE LDPE LLDPE PC PP PS ABS, Constructed in 2002, The line includes:, (OPTIONAL - Buffer silo with agitators and feeding auger), forced feeding unit, extruder with 180 mm screw 35 L/D, vacuum degassing system, 415 kw drive, semi-automatic screen-changer with 300 mm diam. screens., water ring pelletizing unit, drying centrifuge, vibro-classifier, electric cabinets for managing the line, throughput rate 1.000-1.400 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Running until October 2023, Available RECONDITIONED (various steps meeting your budget), Available with FULLY AUTOMATIC SCREENCHANGER on request., See how we recondition [HERE](https://www.germanplast.eu/pages/what-we-do), ask for video of the line running

There is a complete underwater pelletizing system with vibrator, heat exchanger, centrifuge, extruder, pelletizer, water basin, sieves, knife blocks, documentation and other spare parts available, a sieve changer is available separately, an inspection is possible.

Key data: 120

Extruder 2 spindles (pelletizer). Brand: Amut, 120 mm Ø, 17 L/D, engine: 75 hp. Variable speed drive, hydraulic filter changer: 120 mm, air head cutting, screen, venturi and big-bag bagging.

PREALPINA 85 mm. 35 L/D, for HDPE LDPE LLDPE PC PP PS ABS, The line includes:, Buffer silo with agitators and feeding auger, forced feeding unit, extruder with 85 mm screw 35 L/D, vacuum degassing system, semi-automatic screen-changer, water ring pelletizing unit, drying centrifuge, vibro-classifier, electric cabinets for managing the line, nominal throughput rate 180.240 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Constructed in 1995, The line is offered RECONDITIONED, Running until October 2023, Available AS IS or RECONDITIONED (various steps meeting your budget), Available with FULLY AUTOMATIC SCREENCHANGER on request.

for PE PP PS PC ABS, Barrel with screw Ø 130 mm. 35 L/D, feeding hopper Vacuum degassing pump Non-stop hydraulic screen changer Water ring pelletizer Drying centrifuge Water tank and heat exchanging unit N.2 control cabinets Offered AS IS

Key data: 120

Extruder 1 spindle (pelletizer). Brand: Flag, 120 mm Ø, 40 L/D, engine: 100 hp. Variable speed drive, degasser, hydraulic filter changer: 120 mm, air head cutting, venturi screen and big-bag bagging.

for LDPE HDPE PP ABS PC PS, Nominal throughput rate 350-450 kg/h depending on feeding reate and material including scrap silo fedding auger crammed feeder extruder with 105 mm screw 40 LD double degassing 110 kw a.c.drive non stop hydraulic screenchanger water ring pelletizer drying centrifuge electrical cabinet user’s manuals and drawings constructed in 2000 offered RECONDITIONED, On request, we can fit this extruder with a fully automatic screenchanger.

For a variety of applications : PE PP PS EPS ABS MIXED PLASTICS, RDF, ORGANIC WASTE, etc. Automatic process. No operator needed, huge output, heavy duty. Italian technology and material quality standards. Can be inspected in our premises for a few days more Construction year 2005 – used for tests only Used machine next-to-new (very few worked hours) Very versatile, can be used for a variety of applications as RDF, briquettes, wood plastic compounds or just to agglomerate moist plastics for further pelletising. Materials are subjectd to pressure and friction treatment. The friction generates heat which melts plastics and binds it to the other materials (if present). The Output is a square shaped stream 140×140 mm. (Different matrixes can be supplied) Average output from 1500 to above 2000 kg/hr, depending on material and moisture content. Average power consumption 260 kw/h – 0,12 kw/ ...

ROTOR and STATOR knives, MILL BLADES, PELLETIZER KNIVES, perfectly compatible with major Constructors machinery, such as :, ADLER BUZZI ALPINE BANO CDM CMG CONDUX CUMBERLAND DIPRE ELDAN ENGINPLAST FBM FILTEC FOLCIERI FORREC GALA GAMMA MECCANICA GUIDETTI HERBOLD ISVE LINDNER MECCANOPLASTICA MOLINARI MORETTO NEUE HERBOLD NGR OMP PALLMANN PIOVAN PREALPINA PREVIERO PROMECO PRT RAPID RIETER SATRIND STOKKERMILL TECNOFER TECNOVA TPA TRIA VECOOPLAN VIRGINIO VMC WEIMA WERNER WRS ZERMA, or made on constructor’s design Made with top quality steel tempered in various hardness degrees in accordance to the specific task required., For PLASTICS, WOOD, WEEE, TIRES, AL, CABLES, COPPER, and more

SEMI-AUTOMATIC, NON-STOP SCREENCHANGER, Screen Ø 30 to 400 mm. Can fit any type of extruders with single or twin screws Made in sturdy steel on supporting wheeled cart for easy transport Smart construction out of our long experience in plastic extrusion Complete with control panel for temperature and pressure management Hydraulic power pack Connection flanges available on given design of pelletizer and extruder Single drawer with 2 sliding breakers (available also double/4 breakers), screen change speed can be adjusted, TYPE: Semi-automatic, non-stop

LEDA EXTRUDER 160 mm 50 LD 2 degassing pumps, for PP PS PE ABS PC, etc., Very good quality for this extruder, 2 m3 ca. storage silo, crammed vertical screw for light materials with adjustable speed,, extruder with barrel 160 mm. screw, 50 L/D, Infra Red Heaters, 355 kw a.c.drive with inverter (about 60% power used in work), Double vacuum degassing system, Control cabinet, Nominal throughput rate 800-900 kg./h, The extruder is offered RECONDITIONED, and can be completed with FULLY AUTOMATIC SCREENCHANGER + PELLETIZER, L/D RATIO: 50:1

It is a used Häussler wood-fired oven type Habomat20 (built year 2009) for sale. - Fuel: wood pellets - with chimney Price on request.

Extruder with screw diam. 60 mm.35 L/D, for LDPE HDPE LLDPE PP PC PS ABS EPS EPE XPS Complete with scrap silo with agitators on bottom Connecting screw to crammed feeder Crammed feeder with vertical screw extruder with 60 mm screw 35 L/D n.1 vacuum degassing pump Semi-automatic non stop hydraulic screenchanger Water ring pelletizing unit Drying centrifuge Vibro classifier electric cabinet Total installed power 86 kw Used 50 kwh Average production rate 110-150 kg/h depending on material and feeding rate The line is offered as is or reconditioned

Key data: 130 mm, 35 , 600 U/min

Material: PE, PP, PS, ABS Details: DC motor, segmented screws and barrels, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors. Control cabinet for heating and motor control (NEW. Siemens S7) Screw Ø: 2x 130 mm L/D: 35:1 Motor: 500 kW (DC) Optional: side feeding, screen changer, GALA underwater pelletizing

1) Wood pulveriser input 12mm out put 150mesh 2) hot mixer max temperature 120dg capacity 100 kg per pach(15 mints each pach) 3) PE pruvolizer (from granules to powder) capacity 200 kg per hour 4) Crusher capacity 500 kgper hour 5) Wpc pelletizing extrotion line capacity 300 kg per hour 6) Extrusion line to make wpc wall and decking capacity 42 mters per hour including cooling table and cutting table and dropping area. This factory includes all the necessary tools and accessories, it is almost new in condition, built in 2021. It has produced 5000sqm of product

I am selling 2 extrusion machines, model sj35 and model sj45. complete production line. friendmachinery brand. ideal for creating filament and coils for 3d printers from pellets. offers are heard. shipments are not made. more information by private.

Plastic recycling machine YEI Model: VDN-V100 Screw diameter : 100 mm LD ratio: 30 Screw rpm: 0-150 Main motor: 125 HP , 90 kW Cutter compactor motor: 75 HP, 55 kW Degassing : Two zones with water based vacuum pump Screen changer: Hydraulic, with 2 cylinders, non-stop machine running design Pelletizer: Die-face type by water Cenrifuge: Vertical type Feeding conveyor with metal detector Max. output: LDPE 380 kg/h, HDPE 360 kg/h, PP 330 kg/h

The ProCepT Granulator is used for wet or melt high shear granulation and pelletization. Depending on vessel size, the typical batch range varies from 15g to 1kg of product. The granulator is used to create wet agglomerates by high shear wet mixing of different powders. The atomized nozzle sprays the solvent with binder or active on the powder vortex, created by the impeller and chopper. The ProCepT Granulator is the ideal equipment for formulation R&D, demonstration or educational purposes and features: Combination of plexi and glass for excellent process transparency Stainless steel vessels available Integrated on a trolley, wall mounted or on a fixed table/floor stand Monitoring and control of all critical parameters Water and organic solvents Easy clean-ability and strip-down of components in minutes Different vessel sizes (for scale-up) Atomization nozzle with different orifices Qui ...

Rudnick & Enners Screening Machine | Vibrating screen type RE-RS 3x6/4F refurbished with new sieve box - Make: Rudnick & Enners - Type: RE-RS 3x6/4F - Year of construction: 1998 - Condition: refurbished - Screening capacity: up to approx. 80 - 100 srm/h (for wood chips and sawdust) - Screen area: 6.5 m² per screen mesh size - Fractions: 3 or 4 - Screen decks: 3 pieces - Drive power: 5.5 kW - L x W x H: 6,000 x 2,800 x 2,350 mm - Machine weight: approx. 5,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of inlets and outlets according to customer requirements Screening machine overhauled with new screen box. Spherical roller bearings and universal joints are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed woo ...

NEXTROM FCL21/HS Multi-layer Cast Film Line Materials to be processed: Barrier film / Stretch film / PP film / LDPE Extruders: Number of extruders: Extruder 1: diam. 140 mm; 244 kW motor Extruder 2: diam. 140 mm; 244 kW motor Extruder 3: diam. 75 mm; 120 kW motor Extruder 4: diam. 75 mm; 120 kW motor ABB drives for the extruders 2x90mm screws for trim feeding Die: Flat die type, Cloeren, year 2016 Lip width: 2600 mm Lip gap adjustable: from xx to xxx microns Film thickness 12-35 microns Heating: 64kW + 100 pc heating elements for profile regulation Output: Up to 1000 kg/hour depending on material formulation Chill-Roller: 2700 mm wide diam. 1000mm Winder: NEXTROM Winder, fully automatic roll change  Maximum line speed 900 m/min  Reels diameter up to 500 mm  Winding width 2000 mm Accessories:  Longitudinal film cutting unit   Edge trim cutting syst ...

USED REGRANULATION LINE for PE PP PC PS ABS PA, throughput rate 800 kg/h, including crammed feeding unit, extruder with screw diam. 150 mm.(5.91) 33 L/D, fan cooled barrel, 352 kw drive, vacuum degassing unit, semi-automatic sliding plate screen changer (possible addition of fully automatic screen-changer), POWER PACK, Filtec under water pelletizer, water filtering unit, heat exchanging unit, centrifugal dryer, electric wiring and cabinet new in 2004, This extruder has been constructed in 1997, and we offer it reconditioned, CAPACITY: 800 kg/h, MATERIALS: PE PP PS PC ABS PA, VACUUM DEGASSING POINTS: 1, AVAILABILITY: 5-6 weeks from confirmation

EURO Pack Winner 600 Fully automatic pelletize for putting bags on pallets. Italian quality machine with control system

Allgaier Screening Machine | Vibrating screen type ARSM 33-10 Refurbished (workshop overhauled) - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: refurbished - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of the spouts according to customer requirements Screening machine overhauled. Spherical roller bearings and struts are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibr ...

The line is offered TOTALLY RECONDITIONED., PREALPINA EXTRUDER 180 mm. 2 degassing points, for LDPE HDPE PP PS PC ABS EPS EPE EPS XPS..., average throughput rate 800-1.200 kg/h depending on materials and feeding rate Including: Buffer silo with agitators and feeding auger. Forced feeding unit. Extruder with 180 mm bimetallic screw 40 L/D Double vacuum degassing system a.c.355 kw a.c.drive controlled by ABB inverter Semi-automatic non-stop screen-changer with 300 mm diam. screens., FULLY AUTOMATIC NEW SCREEN-CHANGER AVAILABLE (+200 K€ +/-) hydraulic power pack Water ring pelletizing unit. Drying centrifuge., water re-circulating tank, Heat exchanging unit on gearbox group + cutting unit. Vibro-classifier., Control panel with touch screen Electric cabinets for managing the line, Constructed in 2006. Total installed power 650 kw, average used in work 420 kw User’s manuals, drawings, CE. ...

• For hard gelatine capsules • Output max. 120,000 capsules/h • Available formats for capsule sizes 00, 0, 0el, 1, 2, 4 • Available dosing rings for pellets/microfilm tablets and dosing station for powder/granules • Deionisation for static powders • Sample weight control by Sartorios balance, automatic operation, with control via PLC for MG2 dosing, regularly calibrated • Capsule hopper • Empty capsule sorting with lifting device for deformed capsules • Tricaps finished capsule sorting machine for deformed capsules • Bulk suction and powder feed via Volkmann vacuum devices with various suction lances for different products • Separate suction unit with side channel blowers • Only H1 and FDA lubricants from Klüber • Regular maintenance by MG2 and own personnel (monthly, ¼ yearly, yearly, by the hour) • Complete spare parts package for 4,000 h maintenance availa ...

ID2999 RUF RB30/3000/100 year/Year of construction 2004 4680 hours/hours Pelletizing machine, with hydraulic unit and control Pelletizing machine, with hydraulic unit and control unit

GAMMAMECCANICA EXTRUDER, for PE PP PS ABS PC PA, barrel with screw diam.90 mm., loading hopper, semi-automatic hydraulic screen-changer, hydraulic pack, strand die, cooling bath, strand pelletizer, electric cabinet, Construction year 2008, The line is offered totally reconditioned, Possible replacement of cutting system into water ring, Possible addition of fully automatic screen-changer, classifier, blender,..

BINOVA WATER RING PELLETIZER, for HDPE LDPE LLDPE PC PP PS ABS, horizontal type, throughput rate 800-1200 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Constructed in 2003, Offered checked and reconditioned, See how we recondition [HERE](https://www.germanplast.eu/pages/what-we-do), AVAILABILITY: 5 weeks time

Used pelletising machine Bühler model DPAS-660/228. New 1999. Power 200 kW. Additionall several dies. Documentation available.

EXTRUSIONE LINE PREALPINA CDM, throughput rate 500-700 kg, Installed power 435 kw (about 280 kw used in work), crammed feeding unit, n.4 next-to-new Maguire gravimetrical dosing units on supporting structure, Barrel with 130 mm screw Ø 35 L/D, screw geometry for LDPE LLDPE HDPE PC PS ABS, N.1 vacuum degassing pump, FIMIC RAS 400 fully automatic screenchanger, water ring pelletizer, drying centrifuge, vibro classifier, This line has been totally reconditioned in 2020 replacing many parts with original ones (cabinet/feeding piece/screw/barrel,), Still connected and working with PE., Ready-to-go, THROUGHPUT RATE: 500-700 kg/h, MATERIALS: PE PP PC PS ABS, INSTALLED POWER: 435 KW, AVAILABILITY: immediate

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, NEW SCREWS, n.1 dosing unit with hopper, N.1 vacuum degassing pump, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screenchanger with 90 mm screens (available with fully automatic screenchanger, hydraulic pack, strand die (available with water ring pelletizer), cooling bath with heat exchanging unit, strand pelletizer (available fitted with a water ring pelletizer), electric cabinet with air condititioning (for extruder, screenchanger, hydraulic pack), constructed i n 2001, The line is offered reconditioned, Possible addition of :, vertical mixer, vibro-classifier, bag filling station, etc. on separate offer, CAPACITY: 400 kg/h

TECNOVA WATER RING PELLETIZER, Type TTC1000 vertical, Drying centrifuge with water tank and re-circulating pump, n. 1 spare pump, cyclone for granulate discharging, pulpit electric panel, now producing 1200 kg on a 160 mm extruder, Construction year 2001, Machine offered reconditioned

General SKU300U594 LocationBarneveld MakeMG2 Bologna TypeMG Futura No.5055 Year of constructionunknown Main Features MaterialStainless steel Motor4.5 KW Specified Features - Powder filler MaterialStainless steel 1.4401 (316) Powder fillercheck Rotatingcheck Capacity6.000-48.000 capsules/h With motor4,5 kW: 380 volt Information Total height1,83 m Weight1500 kg CEcheck Floorspace1,10 x 1,09 m Extra SpecificationsCapsule filling machine/capsule polishing machine, suitable for powders, pellets and micro tablets.Powder fillersMG2 BolognaPackaging machines > Powder fillersBrand > MG2 Bologna What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!