pellet press used for sale

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder, pneumo-hydraulic cylinder, hydro-pneumatic press cylinder -Manufacturer: TOX PRESSOTECHNIK, pneumohydraulic cylinder type S 04.113.040.120 -Lifting distance: 300 mm -Piston: Ø mm -Piston rod: Ø 30 mm -Quantity: 2x cylinders available -Price per piece -Dimensions: 645/85/H130 mm -Weight: 16 kg/pc.

Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Hydropneumatic mode of operation Punching force: 50 kN Working stroke: 35 mm Projection: 110 mm Installation height: 140 mm

Offer 26051 Technical data: - Feed of the milling unit manually - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - max. Milling height 150 mm - max. Milling depth 110 mm - max. Milling length 500 mm - Angle-adjustable stop Li + Re 20 - 90 ° - Milling spindle speed 2800 rpm - Drive 400 V 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle 10 l - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Offer 26050 Univ. notching sawing machine Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° to 280 mm - Notching width at 30° to 100 mm - Vertical saw blade manual 90° - 30° swivel via handwheel - Use as a Schiftersäge without horiz. Saw blade possible - Profile stop shoulder can be swivelled 30° - 90° - 30° - Pneumatic material vise - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine.

General SKU328X701 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200-K/3SWFK Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver MaterialMild steel With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck Information No.6040 Year of construction2007 Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

General SKU328X703 LocationBarneveld CEcheck Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver MaterialMild steel With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck Information MakeGeiger Maschinebau AG TypeD-1200-K Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU328X699 LocationBarneveld CEcheck MakeGeiger Maschinebau AG Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel Information Type1200-HSK Year of constructionD-1200-K/3SWFK Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...

General SKU328X702 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200-K/3Sw Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver MaterialMild steel With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck Information No.5480 Year of construction1995 Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines ...

General SKU328X700 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200-K/3SWFK Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel Dissolvers Capacity3900 l/h Information No.6163 Year of construction2011 Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands.  ...

General SKU328X698 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200xHSK Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel Information No.5235 Year of construction1990 Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for m ...

Pneumatic hammer C230G010

CONTROLS   NC controls SIEMENS S7 TECHNICAL SPECIFICATION   max. diameter of saw blade: 460 mm   cutting capacity round: 146 mm   cutting capacity square: 138 mm   mitre cutting: no   .. oblong: 250 mm   .. .. x: 100 mm   .. to: 220 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 2200 mm   space requirements -front/back-: 1950 mm   total height: 2000 mm   total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%

Year: 2017 - technically efficient, ready to work – after full service - split heads - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table - hydraulic lock for reversing the resistance unit

General SKU004Y057 MakePressindustria S.p.A. TypeTE.3/SV/R/5 No.4302 Year of construction1983 LocationBarneveld Pressure Working pressure0.067 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume7 Ltr. Motor0.55 KW Specified Features - Processing vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselVacuum processing vessel (1x) Capacitymin. 3/max. 7 Ltr Vessel sizesdia. 250x250mm, Vessel can be lifted hydr. Dished bottomcheck Flat top sidecheck With covercheck With jacketcheck Max. temperature160 Degr. C. With anchor stirrerscraper stirrer Counter rotating stirrercheck Motor0,07/0,22 KW, 220 Volt (3 Ph) Speed mixing shaft3-60 Rpm With homogeniser(400-2000 Rpm) Motor0,2/0,55 KW Information With switchgearcheck Floorspace1,2x0,9 M Total height2,3 M Technical specs Extra informationVessel can be  ...

Overview This container sweep-off depalletiser (new glass) was manufactured in 2020 by Germany Krones AG. The machine is designed for high-speed depalletising of new glass containers in beverage production lines. It operates with a sweep-off system using a four-sided centring carriage to transfer complete container layers onto a discharge table. Technical data Capacity: approx. 48,000 cont/h (up to 57,600 cont/h machine output) Application: Depalletising of new glass containers Configuration: Z-arrangement with pallet infeed and upper-level container discharge Pallet handling: Pallet lifting unit with automatic empty pallet discharge Discharge table: approx. 5,000 mm length Conveyor: Steel chain conveyor Drives: Servo drives (SEW) Sweep-off system: Four-sided centring carriage, servo-driven Layer handling: Integrated handling module with suction gripper system for layer pads and top ...

General SKU232M159 MakeTop Industrie F-77 013 Vaux Le Penil Type1876 0000 Reactor cristallisation CO2 No.1449 Year of construction2007 Mounted on legsin framework Pressure Working pressure350 Bar Main Features MaterialStainless steel Volume0.1 Ltr. Motor0.25 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity0,094 Ltr Vessel sizesdia. 114x145mm With jacketcheck Max. temperature150°C Motor0,25 KW, 400 Volt Information LocationBarneveld With switchgearcheck Floorspace1,0x0,6M Total height1,0M Weight130 KGCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsStainless Steel ReactorsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicPlastic & polymersAgrochemicalsRubberOther chemicalFine chemicalsOintmentsGeneric medicinesPaints & coat ...

- technically efficient, ready to work – after full service - disc diameter: 450 mm - bottom cutting - cooling and lubrication system - vertical pneumatic clamps - protective cover - compressed air preparation station

General SKU001A039 MakeUHDE Hagen No.2578 Year of construction1978, Internal coil built in 1991 Mounted on legscheck Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor ReactorHigh pressure Capacity20 Ltr Vessel sizesdia. 215x600mm Dished bottomcheck Dished top sidecheck With jacket/Electric heating Internal heating spiral(0,8 Ltr) Max. temperature350 Degr. C. With anchor stirrercheck (built in 1991) Motor0,55 KW, 220/380 Volt (Ex) Speed mixing shaftvariable (± 155-1120 Rpm) Stainless Steel Reactors MaterialStainless steel 1.4306 (304L) Information LocationBarneveld Floorspace0,9x0,9 m Total height2,2 m Weight850 kg Extra Specifications- Vessel does not have a bottom outlet Catalysts & fillersSolventsDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsStain ...

Max. basket weight:50 kg Temperature for washing water:0-60 °C Electrical heating power:2 kW Rated power supply:230 V Machine size LxWxH:600x800x1650 mm Machine weight:90 kg DIMENSIONS DxWxH 600x800x1650 mm POWER SUPPLY 230 V DETERGENT water PUMP POWER 1.2 kW TANK CAPACITY 100 l LOAD CAPACITY 50 kg HEATING ELEMENTS POWER 2 kW HEATING TEMPERATURE 0-60° WORKTOP DIMENSIONS 750x550 mm WEIGHT 90 kg

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

Pellet heating, pellet stove, biomass stove used. Manufacturer: ELMEC Group Srl Type: B-MAX 300 EBBR020300-P01 Year of construction: 2018 Burner power max. 300 kW Nominal power 250.2 kW Max water temp. 90°C Boiler dimensions: approx. 1700 x 1100 x 1650 mm Additional burner approx. 1000 x 500 x 900 mm Pellet hopper approx. 800 x 800 x 1200 mm + auger Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Auction-ID: A1-46801-87

Wood pelletizing plant, KAHL pellet press used the complex includes: Pellet press AMANDUS KAHL Matrice diameter approx. 1000 mm Pallet diameter approx. Ø 8 mm 5 Koller approx. Ø 340 x 130 mm Motor power 160 kW an auxiliary motor is damaged, but can be replaced by us Dimensions approx. 1600 x 1800 x 3000 mm + motor Weight approx. 8000 kg Conditioner / Dosing and Mixing Screw Diameter approx. Ø 400 mm 5.5 kW Dimensions approx. 3100 x 900 x 800 mm Single shaft paddle mixer Dimensions approx. 3300 x 1600 x 2000 mm + gear motor Pellet coolers Dimensions approx. 2300 x 2300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

l 90 kw POWER 1350 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 500 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control of the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 90 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

For sale is a used pelleting line that has been pelletizing wood fiber-based fertilizer with cattle manure and digestate for the past four years (approximately 5,000 hours total). It incorporates components from various well-known manufacturers, including the Amandus KAHL pellet press/continuous mixer, Bühler hammer mill/conditioner, CPM pellet cooler, Wynveen pellet screen, and Rako/Apullma conveying technology. Capacity: 1. Wood chips with dried cattle manure: approx. 1.5 t/h 2. Dried, separated compost/dried digestate: approx. 2.5 t/h 3. According to the manufacturer, KAHL, the press can process up to 3 t/h of biomass. The customer is now restructuring their operations, making this line available for sale. The preferred option is to sell the entire line, but individual components can be purchased separately by arrangement. The customer is primarily seeking to sel ...

L 22 Kw POWER 330 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 22 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

This press from Collin at Plastima Used Machinery in machine storage. The machine is from 2001 and is in good condition. – Brand: Collin Pilot & Lab Solutions – Model: P200P – Construction year: 2001 – Plate Size: 200 x 200 Mm – Max. pressing force: 196 kN

Capacity 3 ton/hour Motor power 200Kw Die diameter 1000 mm Number of rollers 5

Koller head with 5 wheels, used

Technical details Type: Pelleting press / pellet press Manufacturer: PCM Year: 2014 Engine power: 45 kW Motor type: 7XM 280S6 B3 Production capacity: Approx. 400–600 kg/h Configuration: - Ring press pellet production system - Automatic control panel - Feeding hopper - Vibrating table Condition: - New ring installed - New rollers installed Application: Pellet production for biomass and industrial processing operations Auction-ID: A7-40554-5

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

Stock - No.: 1820 1 used, overhauled CUBE DICER as type Sagitta - LANCELIN BG 200 working width 200 mm drive 7,5 kW – NEW cutting tools 4 x 4 x 3 mm cube pellets incl. pneumatic infeed roller system More pelletizing equipment ex our stock Wuppertal Germany available, Ask for our most recent stock-list or visit us

Stock - No.: 1624 1 piece used strand pelletizer PREVIERO > adjustable cutting length type TA 200 NA year 1996 – partly overhauled in 2020 drive 4 kW + 0,37 kW 200 mm cutting width new control board FU controller We have more strand-pelletizers, waterring or underwater pelletizing units available ex stock Wuppertal Germany, You´re welcome to visit us. Please find our stock-list on the Homepage: plastictrading

No.: 2324 1 used strand-pelletizer Alphatec type AS-G 200 E year 2019, very good condition - lab / demo use only working width: 200 mm drive 7,5 KW – AC frequency controlled cutting rotor with hard-metal teeth pneumaticm pressure roller device Machine is ready for demo. More strand-pelletizer ex our Stock available: Scheer, Automatik, Rieter, IPS, AlphaTec, Pelltec, .. Our actual machine stock-list you can find on our Homepage: plasticotrading.de

For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...

Brand-New, Still Packed, Pellet Mill, capacity 5 tons equipped with 6 heads

This lot consists of complete plant to make pellets. With automatic lubrication, control box and closure. Never used Auction-ID: A3-43538-17026

CENTRIFUGAL DRYER for pellets (to go with an existing pelletizer), for a 350/400 kg/h capacity of PE PP ABS PS PC flakes, made of sturdy AISI304 stainless steel with vertical axis, driven by a 2.2 kW 3 Ph.asynchronous motor,, complete with soundproofed discharge cyclone, stainless steel tank for water recovery and recycling, 1.1 kW water ump,, equipped with drainage for overflowing, HEAT EXCHANGER GROUP, made of painted carbon steel, internal copper tube bundle, with removable head to facilitate cleaning, fixed to the tank using brackets, float with water replenishment valve, Electrical board of machine wiring, Users manual, CE compliance, installed power - used power in work: about 60-65% : 2.2, conditions: new machine, type: for granulate - this machine goes after the pelletizer, capacity: 300-450 kg/h

PELLETIZERS WATER RING, Constructed with first quality materials and components they are reliable accessories to your extrusion line, compact and economic., made in sturdy stainless steel, With self adjusting knives to nozzle, with less wearing out and incresed efficiency, re-circulating water pump with water filtering unit for re-use, Heat exchanging unit included. You can connect it with your factory chilling unit., electric cabinet with Siemens touch screen for setting all parameters, Modem for remote assistance, Suitable for a variety of plastics and masterbatches., Size bespoke to your project : 100 to 3.000 kg/h, Materials : LDPE HDPE LLDPE PP PS PC ABS, capacity: 100-3.000 KG.

GAMMA MECCANICA WATER RING PELLETIZER, Model TDA 6, stainlesse steel housing and all parts in contact with water, star blade holder for 4 knives, throughput rate 2,0 Tons/h depending on materials and feeding rate, constructed in 2013, complete with stainless steel drying centrifugeù, screen basket in stainless steel, control panel, photos taken before reconditioning, the machine is offered totally reconditioned, capacity: 2.500 kg/h

For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...

This OGM 1.5 pellet production line is designed for processing straw, hay, alfalfa, miscanthus, compost,and other agricultural raw materials. The pellet press is also suitable for the production of wood pellets. The entire line has been dismantled and is ready for loading. Production Capacity - Maximum hourly output: up to 1300 kg per hour (material dependent) - Individual components such as the hammer mill can achieve higher hourly output Line Components - Pellet press 75 kW, year of manufacture 2013 - Elevator, year of manufacture 2013 - Pellet cooler with sieve, year of manufacture 2013 - Buffer tank with discharge for ground material, year of manufacture 2013 - 2 cyclones (centrifugal separators) with rotary valve, year of manufacture 2013 - 1 fan for radiator exhaust, year of manufacture 2013 - 1 new ring die and various used spare parts - 10 m feed table to bale unroller, year  ...

Pneumatic press, pneumatic press BOSCH type 0840 002 002Fabr. No. 041 Year of construction 1980Compressive force 18 KN = 1,8 ton. at 5 bar 15 kN = 1.5 ton. at 4 bar 12 kN = 1.2 ton. at 3 bar 8 kN = 0.8 ton. at 2 bar 6 kN = 0.6 ton. at 1.8 barprojection 100 mmram stroke 70 mmtable surface 245 x 200ram area 45 mminstallation height max. 235 mmClamping pin hole 20 mm with clamping screwCompressed air requirement 5 bar- Press force infinitely adjustable via pressure regulator- Pneumatic cylinder with plunger