pellet mill used for sale

SMEC NS 2000 MYear of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mmTurning length : 243 mm____________Description:Main spindleTechnology:Belt-driven spindleSpeed:4,500 rpmPower (max.):20 kWBar capacity:67 mmWorkpiece clamping:3-jaw chuck, Samchully MH-208BV1Tool holder:Technology:12-station turretTool holder:BMT45Tool drive:5,000 rpmTravel in X/Y/Z:175/-/350TailstockTechnology:Manual adjustmentTubus stroke:80 mmTubus diameter:65 mmMount:MT4Features/Accessories:Chip Management:Chip ConveyorCoolant Management:IKZ Pump with Oil Skimmer and High Pressure, 10 barAutomation:PreparedFinished Parts Removal:Parts Catcher with Collection Box

Index R 200Year of manuf. : 2011 Control : Siemens C200-4D SL ____________Description:In General:Year of construction:2011Control system:Siemens 840 Dsl (C200-4D SL)Bar capacity:65 mmMilling spindles:18,000 rpmMain spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°Z-axis:390 mmBar capacity:65 mmClamping cylinder:Hollow clamping cylinderChuck:3-jaw chuckSub spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°X-axis:600 mmZ-axis:390 mmBar capacity:65 mmChuck:3-jaw chuckTool carrier I:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40X-axis:350 mmY-axis:160 mm (+/- 80 mm)B-axis:230°Tool carrier II:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40Y-axis:160 mm(+/- 80 mm)B-axis:230°Tool magazin:Technology:Chain magazineNumber of station ...

Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without controls or sieve. -Manufacturer: H. Dreher, Side-mounted mill cutting mill -Type: S26/26 -Drive motor: 5.5 kW -Number of cutting blades: 4 pieces -Number of counter blades: 2 pieces -Sieve perforation: Ø 8 mm -Inlet cross-section: mm -Rotor width: 260 mm -Rotor diameter: 260 mm -Quantity: 1 cutting mill available Price: per piece -Dimensions: 650/1460/H1880 mm -Weight: 475 kg

workpiece dia.: 40 mm max. module: 2 min. module: 0,1 workpiece length - max.: 665 mm weight: 4,5 t spindle bore diameter: 82,5 mm Control: Siemens total power requirement: 5,5 kW Technical data max. module 2 Pitch 0.5 - 25 mm Number of speeds multi-speed / multiple max. workpiece diameter40 mm max. workpiece length180 mm Milling cutter diameter max.80 mm max. milling cutter width12 mm Z-axis (milling length with counter point)90 mm Z-axis (milling length without counter point)113 mm Milling head swivelling angle30° / 30° Description Gear hobbing and thread cutting machine. LAMBERT - 124 CNC The machine is in a well-maintained condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 7000 mm y-travel: 3200 mm z-travel: 1500 mm Control: Heidenhain TNC 530 table-size: 6000 x 3000 mm table load: - t spindle turning speed range: 6000 / 18000 U/min tool taper: ISO 50 / HSK 63 feed: 50000 mm/min spindle motor: 34 kW A-Axis: + / - 180 ° c-axis: 0-360 ° distance between columns: 4300 mm Passage height: 2300 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 12,2 x 9,3 x 5,9 m Equipped with: - Heidenhain TNC 530 CNC control - 1 milling head (TAEM) ISO 50, 6,000 rpm - 1 electric spindle head (TUPC) 18,000 rpm, HSK 63 - 1 extended head ISO 50, 6,000 rpm - 40-position tool changer (15x HSK A63, 25x ISO 50) - Coolant system (40 bar IKZ / 4 bar external) - CE mark - Enclosure The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine MH1600 The basic machine was built in 1990 but was rebuilt from scratch in 2015 by the company MMD Bad Emstal, as well as control conversion to iTNC530 (Guideways sanded and scraped, KGT new or overhauled, bearings new, etc. etc..) (so the machine was new again in 2015) iTNC530 IKZ air and water through spindle center Rotoclear Chip conveyor SK 50 Chain 32 WZ Transport beam Crane loading possible Machine is provisionally connected to the power connection and can be visited by appointment

milling machine, year 2009. Used machine. More info & price on IndustrialBuyer.

milling machine, year 1997, CNC TNC. Used machine. More info & price on IndustrialBuyer.

Used Reckermann Delta 1300 K, milling machine built in 1989, Working distances 1000x400x450mm, vertical speed range 60-3000 horizontal 30-1500 1/min, control Heidenhain TNC 151 weight 5000kg, Accessories: Tool holders.

Key data: 2 , 1300 mm

Copy milling machine Longitudinal copy milling machine Wigo Automatic Double Copy Milling Machine Type: 1075 For milling 2 opposite sides, including rounding of the front Maximum working length for workpieces with straight ends: 1300 mm Maximum working length for workpieces with rounded ends: 1000 mm Working width maximum 200 mm Processing height 90 mm, including milling heads 90 mm 2 milling motors motor power approx. 5 kW Spindle diameter 30 mm With thrust rings Continuous table feed 0.5 – 12 m/min Hydraulic motor feed 1.1 kW Return speed 25 m/min. Speed of the milling spindles optionally 7500/9000 rpm. Tool diameter maximum 120 mm 4 pneumatic clamping cylinders from above Operating pressure max. 6 bar Weight approx. 900 kg Dimensions approx. 3200 mm x W 1200 mm x H 1600 mm It is particularly suitable for precise and serial processing of symmetrical wo ...

Key data: 7000 mm, 1600 mm, 1400 mm

Complete system with all the accessories necessary for installation and operation, see below! x = 7000 y = 1600 z = 800 / w = 600mm General overhaul 2007, production year 1991: New Siemens Sinumerik 840D control system, new drive motors, guide guides renovated, new control cabinets. ECOCUT 1 was then operated for only a few months Rapid traverse 12000 mm / min / w axis 6000 mm / min Turntable TDV 2 max. workpiece weight 6t / clamping surface 1000x1000 Turntable TDV 3 max. workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 angle milling heads / chain tool changing system / plate field / complete housing / Knoll hopper feeder / extraction / coolant system with belt filter. With all BWF fixators for the installation of machine bed and plate

With CNC control, HEIDENHAIN, type: TNC 155, with touch probe Travel: x=700 y=550 z=550mm. Size table area 1000 x 490 mm Accessories: Chip conveyor / coolant system / tool holders SK3. Machine is presentably ready for operation under power. Milling machine with protective cabin. The milling machine can be operated at any time without protective cladding and is then "quite handy". Dimensions of milling machine: , width is 1.6m, depth is 2.3m, height is 2.15m and cabinet width is 1.5m

This 7-axis Gildemeister GMX 400 Linear was manufactured in 2005. It features a maximum turning diameter of 640 mm and a turning length of 1585 mm. The machine is equipped with a Siemens Sinumerik 840D Powerline CNC control and offers rapid traverse speeds of 40 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister GMX 400 Linear turn-mill centre we have for sale. Contact us for further details.

Mill, slot 260 x 260 mm. 5.5 kW. With feeding belts, immediately available

For sale is a classic universal tool milling machine Deckel FP4A with Dialog 11 control. The machine comes from a company closure and was reliably in use until the end. The machine was stored and was not energized for a long time. Due to the downtime, the buffer batteries of the control system will probably have to be replaced and the machine parameters reset. Manufacturer: Lid Model: FP4A Control: Dialog 11 Tool holder: SK40 Working range approx.: X: 400mm / Y: 300mm / Z: 400mm The machine is at ground level and dry. The transport must be taken care of by the buyer himself. An indoor crane, pallet truck, forklift, etc. are available on site for loading. The machine can be viewed by appointment. To make an appointment, call 0171 216 414 3 from Mon. - Fri. 9:00 a.m. to 5:00 p.m.

For aluminium and PVC profiles Max. cutter diameter: 280 mm Max. milling length: 400 mm Max. milling depth: 110 mm Max. milling height: 150 mm Pneumatic material tensioners Automatic feed Minimum quantity spraying Weight: approx. 200 kg

Seamless Tube Hot Rolling Mill Equipment From European Seamless Tube production facility in France. Equipment Scope: Hot Rolling section combines Stiefel-type piercing and Assel-type elongation, followed by calibration and rotary sizing, enabling tight dimensional tolerances, low eccentricity, and flexible production scheduling. Learn More • Industrial-grade Hot forming and Rolling assets • Designed for seamless tube production - billet → pierced tube → elongated tube • Suitable for relocation, reuse, or integration into existing steel/tube operations Whatsapp +31 6 51199492 A. Reheating / Thermal Preparation Section • Billet heating furnace systems • Temperature conditioning systems for hot deformation readiness B. Piercing Mill Section (Core Tube Formation Stage) • Rotary piercing mill (seamless tube initiation) • Mand ...

This 6-axis Okuma MacTurn350-W was manufactured in 2003. It features a Z-axis travel of 2000 mm and a spindle speed of 12,000 RPM. The machine is equipped with an automatic tool changer that holds 44 tools and is ready for robotic integration. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MacTurn350-W turn-mill centre we have for sale. Contact us for further details.

A CNC high-speed machining center OPS Ingersoll in gantry design is available. Materials: graphite/copper/aluminum/plastics/hard machining, travel X/Y/Z: 700mm/550mm/450mm, table dimensions X/Y: 850mm/700mm, max. workpiece weight: 2000kg, tool holder to table distance range: 20mm-520mm, tool holder: HSK-E40, spindle: Fischer mW 9/10-4, speed: 42000rpm, spindle power: 17kW, spindle runout accuracy: µm, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2500mm/2700mm, weight: approx. 9000kg, control: Andronic 2060. Documentation available. An on-site inspection is possible.

Boring mill table used. Table load: 40 tons. Table dimensions: 2500 x 3500 mm Table displacement: 1600 mm Condition: Good. Can be demonstrated

x-travel: 1750 mm y-travel: 1400 mm z-travel: 700 mm control: Heidenhain TNC 530 Torque: 101 Nm turning speeds: 15000 U/min spindle taper: HSK A63 engine output: 22 / 18 kW table-size: 1200 mm table load: 5000 kg tool change unit: 60-fach column daylight: 1430 mm distance table - lower edge spindle: 105 - 905 mm A-Axis: 360 / 0,001 ° B-axis (table): 0,001 ° column daylight: 1430 mm total power requirement: 52,9 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 6,2 x 3,75 x 4,3 m 5 axes simultaneous - CNC control Heidenhain TNC 530 - Milling head - Coolant design: external cooling + air, internal cooling + air (60 bar) - Tool changer 60-fold (HSK-A63) - chip conveyor - Electronic handwheel - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

In-line homogenizer with high shear force Manufacturer BWS Technologie GmbH Type S 200 Material parts in contact with the product 1.4462 Double-acting mechanical seal Motor explosion-proof Output 22 kW, liter output max. 10,000 l/h Suitable for dispersing, emulsifying and homogenizing

A Traub CNC automatic lathe including a bar feeder and chip conveyor is offered. Max. bar diameter: 42mm, min./max. bar stock diameter: 12mm-42mm, turning diameter: 42mm, turning length: approx. 250mm, max. speed: 4000rpm, main spindle stroke: 100mm, main spindle feed force: 1600N, number of cutoff slides: 4, X-axis slide stroke: 60mm, cutoff slide working stroke: 33mm, cutoff slide feed force: 4kN, cutoff slide rapid traverse: 15m/min, cutoff slide feed rate: 2.5m/min, slide dimensions X/Y: 112mm/320mm, guide width: 30mm, turret slide X/Z-axis: approx. 80mm/245mm, rapid traverse X/Z: 15m/min/15m/min, feed force X/Z: approx. 3200N/9000N, tool stations: 8, tool holder diameter: 25.4mm, max. turret indexing time: approx. 0.9s, remnant part dimensions X/Y: 42mm/240mm, max. workpiece dimensions for back-side machining X/Y: 42mm/100mm, longitudinal stroke for back-side machining: approx. 115m ...

Used Drilling and Milling Machine Manufacturer: PAMA FT 180 A YOC 1982 Travel distances: X = 12000 mm Y = 4500 mm Z = 1700mm approx. Control: Siemens Sinumeric840 Tool changer: 60 times 3 pcs PAMA heads. Drills, milling machines, etc. Without table Plates are included. From the foundation.

x-travel: 1200 mm y-travel: 400 mm z-travel: 460 mm table-size: 1500 x 400 mm control: konventionell tool adaptor: SK40 turning speed range: 45 - 2000 U/min quill stroke: ja mm total power requirement: kW weight of the machine ca.: 3,2 t dimensions: 2,8 x 2,5 x 2,1 m Equipment: - ELESTA digital display - Infinitely variable feed - Coolant system - Horizontal milling attachment - Chip guard - Chip trays - Hydraulic machine vice - Machine light - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stroke between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spraying device Pneumatic material feed via foot switch Weight: approx. 280 kg

Specifications DRO visualization ISO 50 Cross travel (Z) (mm) 1000 Vertical displacement (Y) (mm) 1000 Longitudinal displacement (X) (mm) 2000 Table size (mm) 2400 x 1200 Workpiece spindle speed 15 - 1450 Voltage 400V Hertz 50

X-axis (longitudinal) 1600 mm Z-axis (vertical) 710 mm Spindle speed 1600 rpm Table width 560 mm In very good condition Y-axis (transverse) 750 mm CNC Type ECS Table length 2000 mm ISO 50 spindle attachment

x-travel: 10.000 mm y-travel: 2.200 mm z-travel: 1.300 mm control: HEIDENHAIN TNC 640 clamping table: - surface area: 11.000 x 2.000 mm max. workpiece weight: 10.000 kg/m² Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 2,5 x 2,5 ° Hirtverzahnung Constant Power at 100 % ED: 43 kW Speed range, stepless: 15 - 5.000 min-1 max. torque: 900 Nm tool taper: SK 50 – DIN 69871-AD internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/250 mm workpiece length: 400 mm weight of tools max.: 20 kg internal coolant system feed: durch das Spindelzentrum changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min max. feed force X-Y-Z-axis: 16.000 N weight of the machine ca.: 40 t dimensions of the machine ca.: 18,2 x 6,0 x 4,9 m • Universal milling ...

This 6-roller mill from Künzel Maschinenbau GmbH is a reliable and powerful solution for malt grinding in breweries. With a capacity of up to 3 tons per hour of coarse grind, it is well suited for medium to high throughput operations. The mill is powered by a 7.5 kW motor running at 1450 rpm and delivers consistent and efficient grinding results. The system comes complete with a grist container and grist transport, making it a ready-to-use solution for integration into existing brewhouse systems. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 6 roller mill, Capacity: 3 t/h coarse grist, Rotation per minute of the motor: 1450 1/min, Power: 7,5 kW motor capacity, Features: 6 roller , Periphery: grist case, grist transport

This 4-axis Hyundai Wia L2100SY turn-mill centre was manufactured in 2012. It features a maximum turning diameter of 335 mm and a turning length of 455 mm. The machine is equipped with a 12-station turret and a spindle speed of up to 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia L2100SY machine we have for sale. Contact us for further details.

Dental colloid mill Manufacturer: Probst & Class PUC Type 10 L Power 7.5 kW U/2.910 min.

X-axis (longitudinal) 2000 mm Y-axis (transverse) 1200 mm Z-axis (vertical) 1500 mm Table length 1300 mm Table width 1100 mm Max workpiece weight 4000 kg Spindle diameter 100 mm Spindle speed 2500 rpm Spindle motor 15 kW Length x width x height 2000.0 × 1200.0 × 1500.0 Weight 12500 kg

boring mill, year 1990, CNC 4045D - v1.12.8. Used machine. More info & price on IndustrialBuyer.

boring mill, year 1990, CNC 4045R. Used machine. More info & price on IndustrialBuyer.

boring mill, year 2018, CNC iTNC 640. Used machine. More info & price on IndustrialBuyer.

The BRETON MATRIX 1300 DY K30 is a 5-axis CNC gantry machining center with a movable gantry design for high-precision complete machining of large workpieces. The rigid steel construction, combined with direct measuring systems and high-dynamic axis drives, ensures high positioning accuracy and consistently stable machining quality. The machine is equipped with a HEIDENHAIN iTNC 640 HSCI CNC control system, including AFC (Adaptive Feed Control) , AVD (Active Vibration Damping) , and CTC (Cross Talk Compensation) . These functions optimize the machining process, reduce vibrations, and improve surface quality and process reliability. The 40 kW high-speed spindle with up to 28,000 rpm features programmable internal cooling (IKZ) from 40 to 70 bar and is suitable for demanding milling operations on a wide variety of materials. The equipment includes a direct-drive NC rotary table Ø 3,500 mm ...

An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling ...

A Deckel CNC universal milling machine is offered. Travel X/Y/Z: 700mm/600mm/550mm, quill stroke: 80mm, milling head swivel range: +/-90°, spindle power: 12kW, max. spindle speed: 6300rpm, feed torque X/Y/Z: 13Nm/13Nm/21Nm, feed rate X/Y/Z: 6m/min, rapid traverse X/Y/Z: 6m/min, tool holder: SK40, measuring resolution: 0.001mm, 4th axis resolution: 0.001°, max. slide load: 1000kg, number of T-slots: 1, T-slot width: 14H7mm, mounting holes for table accessories: M12, control: Deckel Dialog 11. Machine weight: approx. 3900kg, electrical cabinet weight: approx. 475kg, 5110mm/4654mm/2335mm, floor space X/Y: approx. 6200mm/5700mm, floor load: 3500kg/m². Documentation available. Inspection by appointment possible.

Inv. Num. : 9324 Type: 3000x2100 Producer: CYBERTRONIC Robotic Created: 2022 Parameters: Work table length: 3000 mm Work table width: 2100 mm Number of Spindles: 2 pieces The offer includes: Blower/suction unit Dust Extraction OP-2200 Piston compressor MK 103-90-3M PC and software for CNC control Cables Basic accessories

spindle diameter: 100 mm x-travel: 1400 mm dismantled: ja tool adaptor: SK 50 digital: ja weight of the machine ca.: 14 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Milling shaft: Ø 40 x 550 mm Speed: 4400 rpm Table stroke: 500 mm Installed power: 11 kW

A hydraulic three-roll mill Lehmann for fine grinding, dispersing and homogenizing is available. Working width: 600mm, roll diameter: 300mm, weight: approx. 1900kg. Including electrical control cabinet and accessories. Documentation available. An on-site inspection is possible.

GeneralHorizontal Machining Centre in travelling column construction; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal630 mmCross800 mmVertical850 mmPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)Main driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range -12000 rpmSpindle taper HSK-A 63CabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet changerTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis ...

This 3-axis DELTA LGT2113 PRO gantry milling machine was manufactured in 2016. It features a working area of 2100 mm in the X-axis and 1300 mm in the Y-axis, equipped with a powerful 3.6 kW spindle capable of reaching 50,000 rpm. The machine includes a 12-position automatic tool changer and a 4-zone vacuum table, making it suitable for various milling and specialized cutting applications. If you are looking to get high-quality milling capabilities, consider the DELTA LGT2113 PRO machine we have for sale. Contact us for further details.

Technical data (XYZ): X 3500 mm / Y 2500 mm / Z 1700 mm Control: HEIDENHAIN iTNC 530 Miscellaneous: 40-tool changer, spindle Ø130 mm, 3000 rpm, T-slot clamping table 2400 × 2000 mm, spindle extension 730 mm, chip conveyor, coolant system with filter unit, separate cooling unit, protective fence enclosure.

A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible.

TECHNICAL DATA: Working dimensions: max. 1300 x 100 x 60 mm 02 Milling axes Milling cutter axis: Ø 30 mm Usable height of the milling cutter: max. 80 mm Speed: 7000 rpm 03 vertical drilling units 01 Mortising machine Equipped with automatic feeder Installed power: 13 kW

A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible.

Technical data: Manufacturer: Kunzmann Type: WF4 CNC Year of Make: 1999 Control: Heidenhain TNL 410 Travel: X 400 mm Y 320 mm Z 400 mm Working spindle Speed: 0 – 4,000 rpm Work table Dimensions L/W: 650 x 350 mm Tool/movement Tool holder: SK40 Quill stroke: 60 mm Dimensions and weight Dimensions: approx. 2,500 x 1,800 x 2,000 mm Weight: 1,800 kg Condition Condition: Used Functional: Tested and fully functional