pellet line used for sale

Complete wood pellet production line up to 2000kg/h. Currently still connected, can be launched, tested. Sold for dismantling. The entire line - from automatic sawdust feeding to semi-automatic packaging in PE bags or big bags. The line is equipped with a sawdust moisture flow meter (German) that constantly measures sawdust moisture after drying, making it much easier for the operator to regulate the drying process. 2-3 workers worked per shift. Granulator - 2x55kW motors, matrix diameter 450mm.

If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: Contact us for a custom quote HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! 20T PHC Pellet Press Machine Type: Hydraulic Single Column Press Year of construction: 2023 Location: Gelsenkirchen, Germany Specifications: - Press force: max. 20 tons (at 250 bar) - Free tearing force: max. 20 kN - Print build-up time: max. 2 seconds (Closed tool steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Total height: approx. 2400 mm - Hall height: at least 3,500 mm - Parallel deviation: +/- 0.1 mm at 20°C - Deflection:

DRY PELLETIZER FOR PVC AND COMPOUNDS Suitable for extruders with production rate up to 200 kg/h, made in sturdy steel and mounted on a frame equipped with wheels for easy disassembly, granulating chamber in horizontal axis, built in stainless steel, quick opening safety device, knife-holder with fluctuating star to reduce knives consumption., self adjusting knives to nozzle by means of a slide system which keeps knives pressed on the die, reducing wear 2,2 kw drive, 3.000 rpm with extra strong bearing and long shaft, cutting die in anti-wear steel with number and Ø of holes bespoke to project. 1,5 kw Venturi blowing system + pipes and cyclone, n.2 thermoregulation areas, knife mounting template, electric cabinet and touch screen control board with modem for remote assistance, 3 mt.cable machine/panel, flange built to design to fit your extruder, heated by ceramic heating elements , temp ...

Wheelchair-accessible silo system from Hedemann in a stable design. The facility was purchased new in 2016 for 100k and is in very good condition. Filling from below is carried out by an elevator. At the top, the distribution to the two silos is controlled via a folding box. The smooth silo inner walls make the silos easy to clean, which is positive for product changeovers. 2x 25 t (bulk density pellet 800 kg/m³), built in 2016 If you are interested, please write to us and you will receive further detailed information.

UNDERWATER PELLETIZER, up to 1.400 kg/h with soft and rigid PP max 30 MFI, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger holder unit with blade pressure adjustme ...

UNDERWATER PELLETIZER, for rigid and soft PP max MFI : 30 (and more), electrical heater max 14,6 kW, n.2 thermo regulating zones, A pressure transducer and a melt temperature transducer are mounted on the purge valve. The purge valve is controlled by a hydraulic cylinder connected to a hydraulic power unit with a 2.2 kW motor., Steel die with brazed tungsten carbide plates. A conveyor cone for the molten polymer is installed inside., stainless steel granulation chamber, Impeller shaft with 11 kW 2-pole drive motor (3000 rpm nominal, 4000 rpm max) controlled by an inverter with rpm variation and speed readout on the panel. The shaft output side has special seals and a labyrinth and safety water drainage to protect the motor bearings. The impeller motor is integral with a slide sliding on rolling guides, operated, via a recirculating ball screw, by a manual handwheel equipped with a positi ...

General SKU231U190 LocationBarneveld MakeRieter TypePrimo 100S No.10.006-8519 Year of construction2000 Main Features Motor3.5 KW Width100 mm Specified Features - Pelletiser MaterialMild steel Pelletisercheck Rotor width130mm Rotor diameter130mm Number of rotor knives1 Motor 3,5 kW, 400 volt Number of strands:4 Capacity30-90 kg/min Outlet200x140 mm Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight620 kg CEcheck Floorspace1,3x1 m Total height2,2 mPelletisersRieterMills > PelletisersBrand > Rieter What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU231U198 LocationBarneveld MakeRieter TypePRIMO 100 S No.10.0069173 Year of construction2006 Main Features Motor3 KW Width100 mm Specified Features - Pelletiser MaterialMild steel Pelletiserstrand pelletizer Rotor width130mm Rotor diameter100mm With roll feedingcheck Motor3 kW 220-240/380-420 Volt (598 rpm) Capacitymax 350 kg/h Outlet200x140 mm Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight750 kg CEcheck Floorspace1,3x1 m Total height1,45 mPelletisersRieterMills > PelletisersBrand > Rieter What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

UNDERWATER PELLETIZER, suitable for a variety of materials, among which PE PP PS ABS TPE, etc., up to 2.500 kg/h, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger h ...

General SKU412X1247 MakeCF Scheer & CIE LocationBarneveld TypeSGS 100-E Main Features Motor3 KW Width950 mm Specified Features - Pelletiser Pelletisercheck Rotor width100 mm Rotor diameter80 mm, 200 mm Number of rotor knives1 With roll feedingcheck Motor3 kW 220—240 380—420 V 1420 rpm Rotor speed0—1430 rpm Information No.21058787/8 Year of construction1992 Floorspace1,2 x 1 m Total height1,5 m Weight340 kgPelletisersScheer & CieMills > PelletisersBrand > Scheer & Cie What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU379X942 MakeCoperion LocationBarneveld CEcheck TypeSP 50 EN Main Features Motor1.5 KW Inlet diameter40 mm Width50 mm Specified Features - Pelletiser MaterialStainless steel Pelletisercheck Rotor width50 mm Rotor diameter120 mm Number of rotor knives20 Knives can be changed1 Motor1,5 kW (400 V, 1445 rpm) Variable speed drivecheck Number of strands:1 Outlet50 x 50 mm Information No.A21-25633 Year of construction2021 Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace0,90 x 0,90 m Total height1,42 mPelletisersCoperionMills > PelletisersBrand > Coperion What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

STRAND PELLETIZER, 100 mm wide rotor,, 170 mm Ø,, for max n.12 strands, fixed pitch, for up to 200 kg/h capacity, 3,0 kW drive, belt transmission, speed variation through inverter, pneumatic piston to regulate pressure on roll, electric panel on the structure of the machine, hinged cutting chamber, can be totally opened, n.30 knives, Soundproof panel on cutter protection hood, Base mounted on wheels, User’s manual, CE compliance, Dimensions LxWxH 0,86 x 0,92 x 1,57 mt., Weight abt: 280 kg., installed power - used power in work: about 60-65% : 3,0 kw, availability: 60 working days from confirmation, working width: 100 mm, capacity: up to 200 kg/h, conditions: new machine, type: strand pelletizer

STRAND PELLETIZER 250 mm., Variable pitch, with synchronized pull off unit, 4 kW motor, 4 poles, IE3 motor drive, 1.1 kW motor on pull off unit, Transmission belts, Speed variation via inverter, Electrical panel compliant with CE standards - 400 V, 50 Hz with, 2 x 16 Amp sockets, width 250 mm, Rotor with 12 micrometrically adjustable rotating blades, Counter-blade made in widia, Hardened pressure roller, diameter 60 mm, straignt knurling, Hardened drive roller, diameter 40 mm, straight knurling, Pneumatic piston for presser roller adjustment, Chrome plated parts in contact with the material, Stainless steel discharge, Limit switch with safety lock, Mounted on anti-vibration support with sound proof panels, installed power - used power in work: about 60-65% : 5,1 kw, availability: 70 working days ca, working width: 250mm, conditions: new machine, type: strand pelletizer for extruders

STRAND PELLETIZER 250 mm., Fixed pitch, 4 kW motor, 4 poles, IE3 motor drive, Transmission belts, Speed variation via inverter, Electrical panel compliant with CE standards - 400 V, 50 Hz with, 2 x 16 Amp sockets, width 250 mm, Rotor with 12 micrometrically adjustable rotating blades, Counter-blade made in widia, Hardened pressure roller, diameter 60 mm, straignt knurling, Hardened drive roller, diameter 40 mm, straight knurling, Pneumatic piston for presser roller adjustment, Chrome plated parts in contact with the material, Stainless steel discharge, Limit switch with safety lock, Mounted on anti-vibration support with sound proof panels, installed power - used power in work: about 60-65% : 4,0 kw, availability: 70 working days ca, working width: 250 mm, conditions: new machine, type: strand pelletizer for extruders

PRT WATER RING PELLETIZER, for PE PP PS PC ABS, nominal capacity 600-700 kg/h (tested up to 900 with PS), N.4 cutting blades, N.1 thermoregulation zones, Heating power 8.00 kW, Cutting motor power 4.00 kW, N.1 water pumps, heat exchanging unit, Single water pump power 3.00 kW, Vertical centrifuge power 5.50 kW, Steam vacuum power 0.25 kW, soundproofed discharging cyclon, Total installed power 20.75 kW, constructed in 2006, only 200 worked hours, installed power - used power in work: about 60-65% : 20.75, availability: immediate, capacity: 600-700 kg/h (tested with PS 900 kg/h), PRESENT CONDITIONS: as new, excellent quality, price is less than 50% of a new one

General SKU250X207 LocationBarneveld MakePelletron TypeRC 1 Year of constructionunknown Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4301 (304) Filtercheck Information Floor space0,80x0,50 m Total height1,30 m Weight80 kg Extra SpecificationsRC1 DeDuster® The RC 1 DeDuster® is designed for a product throughput of 10 – 750 lb/h (20 – 350 kg/h) and requires only 12 in (305 mm) installation height. The cleaning air will be supplied through a fan with variable speed control. The dusty air will be cleaned in a compact filter/cyclone combination and returned to the DeDuster® in a closed loop system. The RC 1 is equipped with 3 sight windows. With Globaltek filter suction unit, type BLT520, 1200 watt, 230 volt, dimensions 0,90x0,70x1,60 m Miscellaneous filtersPelletronFilters > Miscellaneous filtersBrand > Pelle ...

Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM       The LD8-150 Pellet Die is a multi-spindle gun drilling machine from Mollart’s line of deep hole drilling machines that provides accurately drilled holes for pellet dies up to 1550mm in diameter.  The LD8-150 is an eight spindle (also available in four spindle) deep hole drilling machine for designed for accurately drilling thousands of holes in to pellet dies. The drilling spindles are arranged radially around the work spindle to provide simultaneous drilling on all sides of the die for maximum efficiency. The machine can be outfitted with various workholding options for securing the pellet ...

General SKU379X949 MakePlastic Systems TypeDAC 30 No.DAC001-07 Year of construction2006 Main Features MaterialAluminium/Stainless steel Volume30 Ltr. Motor1 KW Specified Features - Miscellaneous dryer MaterialStainless steel Dryercheck (compressed-air desiccant dryer) Capacity30 l. Information LocationBarneveld CEcheck Extra Specifications Hopper capacity: 30 dm³ (≈ 30 L) Process air flow: 7–20 Nm³/h Process temperature range: 50–150 °C Heating power: 0.95 kW Total installed power: 1.0 kW Energy consumption at 80 °C: 0.11–0.29 kW (listed range) Compressed air (process) flow: 6–16 Nm³/h Compressed air (regeneration) flow: 4 Nm³/h Total max compressed air flow: 20 Nm³/h Required compressed air pressure: 6–8 bar (oil- and water-free)  : Miscellaneous dryersPlastic systemsDryers > Miscellaneous dryersBrand > Plastic systems What you can expect  ...

STRAND PELLETIZER 300 mm., Machine totally reconditioned, 7.5 kW motor drive, Transmission belts, Speed variation via inverter, Electrical panel compliant with CEI standards - 400 V, 50 Hz, Feeding width 300 mm, fixed pitch, 30 cutting pieces on rotor, widia counter blade, Rubber pressure roller, Cross-knurled tempered drive roller, Double pneumatic piston for pressure roller adjustment, Wire feed roller bench, installed power - used power in work: about 60-65% : 7,5 kw, working width: 300 mm, conditions: as new, type: strand pelletizer for extruders

STRAND PELLETIZER, For extruders 500 to 1500 kg/h, width 350 mm., fixed pitch, Counter-blade with 2 cutting edges,, 11 kw drive Supporting structure made in sturdy steel with sides made in special alloy. Group of dandy rolls to guide the streams Lower roll in cemented steel Upper, pressing roll made in nitrated steel, pneumatically lifted Asynchrone drive with inverter Cutting unit with dual cutting edge Made in anti-wear steel Electrical control panel with general switch,service switch and amperometer Adjustable speed Rotor diam. 240 mm. N.28 teeth on rotor Include n.1 extractor, User’s manual, CE compliance, installed power - used power in work: about 60-65% : 11 kW, availability: 60-70 working days ca, working width: 350, capacity: 500 to 1.500 kg/h, conditions: new machine, type: fixed pitch

General SKU050G197 LocationBarneveld MakeMachinefabriek Heesen N.V. Boxtel TypeMonoroll Main Features Motor5.5 KW Inlet diameter175 mm Width40 mm Specified Features - Roll compactor Granulatorcheck Roll sizesø 130 mm Ring dieø 175 x 40 mm Number of dies available:1 Die perforationø 4 mm Number of press rolls1 (500 rpm) Motor5,5 kW(380 V, 1440 rpm) Inletø 150mm Outlet175 x 175mm Information Year of constructionunknown Mounted on wheelscheck Floorspace1,3 x 0,6 m Total height1,4 m Weight450 kg Extra SpecificationsWith stainless steel ring dieRoll compactorsHeesen BoxtelCompactors > Roll compactorsBrand > Heesen Boxtel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

General SKU063S235 MakeScheer & Cie TypeHSG400 No.21057927 Year of construction1990 Mounted on framecheck Main Features Motor22 KW Inlet diameter200 mm Width400 mm Specified Features - Pelletiser Motor22 KW, 380/660 Volt Information LocationBarneveld Mounted on wheelscheck Floorspace1,0x1,6 M Total height1,7 M Weight1200 KGDiscountPelletisersScheer & CieDiscountMills > PelletisersBrand > Scheer & Cie What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Complete chipping plant EWD, capacity 30-40 m3 of logs per hour. The plant was dismantled in Germany. Located in Moscow. Technical data and price on request.

FORMAT: 1 DF-20 DF, 26 MIL. NF PER ANNUM, FORMING, MOULD TRANSPORT, DRIER TRANSPORT, DRIER, SETTING DEVICE, KILN ETC.

1987, CAP.: 75,000 T/ANNUM, STRIP WIDTH: 250 - 1300 MM, THICKNESS: 0.2 - 2.0 MM, COIL WEIGHT: 10 T, SHEET LENGTH: MAX. 4.0 M, 2-ND LINE: CAP.: 30,000 T/ANNUM, STRIP WIDTH: 700-1300 MM, THICKNESS: 0.3-3.0 MM; COIL WEIGHT: 10 T, SHEET LENGTH: 4.0 M, SPEED: 20 M/MIN.,

Complete line for production of twist off metal caps with machines SACMI, Italy. Different sizes and options.

Built in 2004 Capacity single straps up to 40 straps/min Size packaged good width max 580 mm min 180 mm Size packaged good height max 400 mm min 10 mm Equipment cross strapping machine 2003 HS inline strapping machine 2003 I ; working condition

Nr. 03 SINGLE-OVITE EXTRUDERS DIAMETER 100 Nr. 01 HEAD CONSTRUCTION 2 LAYERS

A) Total grinding units: 02 - longitudinal - bottom Grinding units total: 02 - transverse - top - bottom B) Total grinding units: 02 oscillating - right C) Total grinding units: 02 oscillating - links D) Orbital grinding unit total: 02 Complete loading

Different kind of sheeted and rolled breads. Niittypitko 2000 pcs / h, 2 rows, dough thickness 3-4 mm Coffee bread Kranssi 2000 pcs / h, 2 rows, dough thickness 3-4 mm Muhku, 10 000 pcs / h, 8 rows, dough thickness 6-8 mm Ciabatta, 7200 pcs / h, 6 rows Folded bread, 4800 pcs / h, 4 rows, dough thickness 5 mm Capacity based on 20 strokes per minute for the retracting belt, in combination with the product discharge conveyor system Product specification: Manufacturer: Rademaker Holland Type: Crusto bread line Year: 2008 Voltage: 3 x 400 v + N + Pe, 50 Hz Control voltage: 24 Vdc Power consumption: 21, 9 kW Inom: 41 A, max fuse 50 A Avarage air consumption: 196 nl / min Max air consumption: 548 nl / min Dimension: L 21 000 mm, W 3000 mm, H 6000 mm

round bread bread baking line, description: round loaf bread baking line; consisting of 1 stainless steel dosing machine brand Shadowtotal dimensions . approx. 1800x1100x1500mm; equipped with hopper and cutting machine; 400V; 1 conveyor belt, 5-storey; tire width approx. 350mm; total dimensions . approx. 6500x600x700mm; equipped with CPG induction motor; 1 stainless steel 2-piece flattener; 1 stainless steel 13-storey walkthrough proofer; tire width approx. 600mm; total length approx. 7500mm;

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...

SCHNELL SHEAR LINE 300 rebar cutting and bending line was built in 2008 in Italy by Schnell S.p.a. The electrical installation was overhauled in 2024. The SCHNELL SHEAR LINE 300 is a reliable system designed for serial machining of rebar with a maximum diameter of 50 mm. It integrates all the necessary equipment that is responsible for cutting, bending, optimising, storing and handling bars. The entire production cycle, from feeding to the collection of the finished parts, is performed fully automatically. The SCHNELL SL 300 stirrup production machine is fully complete and consists of the following components: – control console – FA/6/14 storage rack for steel – SCHNELL CGS 300 HDY guillotine shears – SCHNELL VBM 12/2 measuring and cutting track with single-sided unloading – SCHNELL ROBOMASTER 45 automatic rebar bending machine – rebar storage and retrieval system ...

Rademaker / Rondo ‘salmon en croute’ line Rademaker block processor with Rondo make up line. Has been producing ‘Salmon en croute’ for major UK supermarkets. Whole line is in lovely condition and can obviously be easily adapted to run other products like pasties, sausage rolls etc. Mainly used seasonally so only 11,800 running hours.

Used line for the production of chocolate "bodies". Year of production 2008. The line includes: - acid-resistant tank with a capacity of 1000 L - 250L double ribbon mixer - CFA 3 body molding machine - TCH-600 pre-cooling tunnel

The main machines in the line: fluid mixer Trusioma hot and cold KO-kneader BUSS Mixing mill Buzuluk 660x2100 mm 4-roll calender Buzuluk 700x1800 mm, inverted "L" tempering and stretching device behind the calender – roller track film thickness profile measuring device winding device

Linear rail with folding cam Height-adjustable for mounting on hole punches

CNC unit with oscillating cutter head Brand: Atemag Type: Function Line Soft Cutter Pro Max. drive speed 6.000 R.P.M Max. tool spindle speed 9.000 R.P.M. (Frequency 150Hz) Gear ratio i = 1:1,48 Torque max. 8Nm Amplitude: 4mm

Finger jointing line The plant is from 2011 and the machines have been delivered NEW by HOWIAL. The Cook Bolinder is a used, old but very robust machine. Some electrical devices have been replaced. Item Description 01 HOWIAL - Dump unstacking SH/4t for lifting the raw wood pile to the required working height working height and semiautomatic separation of the wood of the wood stack. Both battened and unbattened stacks can be separated. can be separated. With inclination possibility for tilting the stack of wood up to 45°. Tilting and lifting of the stack by electric motor drive. drive. stack dimensions max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest lumber length 2,5 m 02 HOWIAL - lamella separation VE 1 for layer separation between tilt destacking and and roller conveyor to the crosscut saw. With pneumatically controlled tongues, on which the material is ma ...

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

Pallet Production Line / SAS bracket line Three people are needed to operate the line and two people to operate the saws for cutting the supports Saw cutting can be further automated. Find more here - / Contact us at -

Grinding line for frozen synthesis , Karl Schnell Packed , stored in Europe, ready to ship and install Featured for US CAPACITY Capacity up to 15 000 kg/h for the fresh process Capacity up to 8 000 kg/h for the frozen process Design for three shifts-operations 6 working days/week with 16 working hours/day RAW MATERIEL All raw materials temperature between -18°C and +15°C: - Pork and chicken liver - Pork pulmon - Atum viscera - MDM Max 19 000 cp @ 0°C Content : Pos.015 KS Lifting device DM-1500 type 632 Maximum load capacity: 1500Kg Designed for frozen raw material pallets Fitted with a safety fence Safety fence secured by 2 safety light curtains Pos.020 KS Breaker PB1 type 492 Single shaft breaker for frozen raw materials pallets Maximum height for frozen pallet: 1450mm Pos.085 KS Lifting device DM-800 type 632 Maximum load capacity: 800Kg Designed for Jumbo/ ...

2x 1991 Kettner, Palletizing lines Palletising line 1 & 2 manufacturer Kettner company Year of construction 1991 Overhauled 2009 STATUS Palletising line 1 2 Currently in operation, Mechanically regularly maintained and in operation CONTROL Currently in operation, but no more spare parts available on the market (therefore the entire system will be replaced) The system is ready for use again when the control unit is replaced Line 1 Empty pallet magazine Infeed conveyor Loader / palletiser Finished pallets’ conveyor line Line 2 Empty pallet magazine Infeed conveyor Loader / palletiser Conveyor line ‘finished pallets’ Find more here - / Contact us at -

WINE BOTTLING LINE 4.000 BOTTLES/HOUR - 28-station rinser - 28-valve filler - Corking machine with 6 heads - Bottle: Glass - Speed: 4.000 bottles/hour of 0,75l Find more here - / Contact us at -

Technical Description - Model: MARK/C 20-32.5 - Manufacturer: ITALPRESSE - Year of Manufacture: 2003 - Line Function: Designed for laminating veneer on chipboard, MDF, and plywood panels. --------------------------------------------------------------- Components of the Line Vacuum Loading Unit: - For loading thin panels from the scissor lift into the brushing machine. - Passage Width: 2000 mm. - Translation Speed: Adjustable 7–35 m/min. - Cycle per Minute: 3–5 (depending on panel size). - Suction Cups: 6. Brushing Machine: - Working Width: 2000 mm. - Max Opening Height: 100 mm. - Rollers: 2 motorized brushing rollers (180 mm diameter), 2 forwarding rollers (125 mm diameter). Glue Spreader (Brand: Osama): - 2 spreading rollers, 2 dosing rollers. - 4 motors. Index Table for Automatic Composition: - Belt dimensions: 2000 × 4000 mm. - Features photocells and a stop bar for pr ...

We are offering for sale an Automatic Powder Coating Line with full encapsulation of the production process manufactured by Ecoline. Elements included in the line: - Surface preparation tunnel - Drying oven - Cooling tunnel after drying - Manual cabin for short series - Dielectric automatic cabin for quick color change - GEMA applications - Cleanroom to maintain constant operating parameters throughout the year (temperature and humidity) - Polymerization oven - Cooling tunnel after firing - Automatic mono rotary conveyor Additional Information: - 3-zone tunnel entirely made of stainless steel. The first section is heated by an external exchanger and equipped with a coalescing oil separator and bag filtration. Additional equipment includes an automatic chemical dosing system from Endress Hauser. - Drying oven with very good insulation with air curtains and hoods at the exit with temp ...

Serialization line for printing folding boxes of medicines Find more here - / Contact us at -

Description EXTRUSION TAPE LINE - Screw Diameter 120 mm - L/D 25 - BD Plast Screen Changer - Motor Power 130 KW - Calender 1200 mm - Slow Stretching Line 1000 mm - Fast Extension Line 1000 mm - Corona Treatment - Rewinder

Description PVC PELLETIZING LINE Turbo mixing line, turbo mixer Plasmec TRM 600, Cooler Plasmec RFO 1500, Scale for liquid additives Plasmec DGL 150.3 Twin screw extruder Bandera diameter 110HT L/D 22 Electric motor D.C 110 kW Universal screws suitabble for Rigid PVC an Soft PVC Hydraulic screen changer BDO 140 Vibrating granule cooller Stock mixer for granule Bagging machine for 25 kg bags

We are offering for sale a Weinig planing line consisting of: - Stacking system (x2) (can also be rotated 180 degrees) - Slat disposal - Isolation - Weinig Hydromat 22 – 7 spindles, up to 80 m/min feed speed ( new control) - sorting station - capping - Bundling Specifications: - Total line length: 35 meters - Total line width: 15 meters Find more here - / Contact us at -