pek engineering used for sale

Flush milling machine HolzHer UF 362 Year of construction 1975 L x W x H: 150 x 80 x 160 cm Weight approx. 440 kg The machine is in good condition, ready for operation, Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

Plastic crusher, industrial shredder, cutting mills Wanner 20/20 E-SS for sale in very good condition. This slow-speed gear grinder is used next to an injection molding machine or in a separate room for grinding angles and middle parts. Due to the low speed, it is also suitable for grinding low-melting elastomers and sensitive engineering plastics. On the rotating rotor there are 6 knives. The crushing capacity of the grinder is approx. 60kg/h. The mill is equipped with a 4 kW engine.

Gear motor Lenze Flange gear motor, shaft diameter 25 mm Wavelength 50 mm 1.5 kW Reduction 20.04 Output speed 172.1 In good condition, ready for use Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

Veneer joining machine with pneumatic voltage Cutting length 3m L x W x H: 3.5 x 1.2 x 1.7 m Year of construction 1996 Weight approx. 550 kg The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR200 Comp Condition: Refurbished with 1 year of warranty Version: V5.6.12 Year: 2010 Control Cabin: KRC2 ed 05 Rated Payload: 200kg Access Distance: 2400mm Contents: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant + 2 Spindle Motors ( Set with Mechanical System ) + Electrical Panels + 2 Servo Drives + Cable Set + 8 DI / 8 DO Shipping: NOT included in the price Payment: 100% payment prior to collection

As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR200-3 Comp Condition: Refurbished with 1 year of warranty Version: V5.6.12 Year: 2010 Control Cabin: KRC2 ed 05 Rated Payload: 200kg Access Distance: 2400mm Included: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant +1 Hertz Spindle Motor (New) + Delta Spindle (Set with the Mechanical System) + Tool Changer Table Not Included: 7th Axis, Engineering Design and Consultancy Shipping: NOT included in the price Payment: 100% payment before collection

x-travel: 4070 mm y-travel: 1185 mm z-travel: 1985 mm total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: 6000 x 4500 x 4000 m Consisting of: Working Range: Measuring column, longitudinal movement, X Axis 4,070 mm Measuring slide, cross, as Y Axis (measuring head) 1,185 mm Measuring slide, vertical, as Z Axis (vertical) 1,985 mm Adjustment of measuring head, roll axis 360 ° pitch axis 220 ° Measuring table 5,000 x 2,000 mm Weight, approx. 15,000 kg Space required 6,000 x 4,500 x 4,000 mm Accessories / Special Features : o 3D tracer head, with turning/swivelling device. o Universal 3D Measuring Software, KOROS CAD 5.2.0 from November 2001 (with lots of enhancements), as well as HOLOS UX for manual or automatic measuring of all geometric elements and free-form surfaces, ideally on passenger car bodies, engineering parts and  ...

Power fork with spring compensation for long goods or pallets payload 2500 kg Fork length 800 mm Year of construction 2015 Position of the forks according to customer requirements The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

1 aseptic Elopak filling machine line No E 5 suitable for ESL milk, UHT milk and fruit and Vegetable juice bottling. set at the moment for 3 formats Int. No.B 5, Series No. 453 Manufacturer: SHIKOKU-KAKOKI LTD Type: U-680A Year of construction 2007 with 3-lane run-off section Capacity 10,500 U/h Conveyor belts for individual packaging are manufactured by Polyketting BV Series No. 121614; Year of construction 2013 3 Elopak screw cap gluers a.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2005 Ref. 22111 b.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22121 c.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22122 d.) Individual packaging connection transport system from the Elopak filling machine to the 3 screw caps Gluing machines and on to the inle ...

Grease melting tank, double-walled stirring tank, rühwerk tank, coolable, heated used Manufacturer: KLARMANN Edelstahverarbeitung Type: Fat melting tank Year of construction 2017 Stainless steel 1.4404 / 1.4301 Total volume: 610 liters Working volume: 500 liters Diameter inside / outside approx. 1000 / 1100 mm Design temperature product rough/jacket space: 100/150°C Operating temperature: Product room: 90°C Design pressure jacket space: 5 bar Heating/cooling surface: bottom and 2/3 of the frame designed as templates Outlet height approx. 800 mm Calculated melting capacity for butter 20 - 30 min for 300 kg of block goods, depending on the output temp. and product size Compact agitator Planetroll 0.37 kW 77 rpm 400 V IP55 Dimensions approx. 1165 x 1165 x 2260 mm Original price approx. 18000,- € The staircase is not included The plant comes from a plant  ...

Flush milling machine HolzHer UF 362 with feed HolzHer 3 rolls Width max. 50 mm 2 motors 0.55 kW, 3 x 400 V, 50 Hz Year of construction 1984 Weight approx. 300 kg L x W x H: 120 x 100 x 130 cm The Fraese is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Lifter Papa Withforce WE 3616 Lifting height 2500 mm Load capacity 1600 kg Load center 800 mm with charger Battery needs to be replaced L x W x H: 2.0 x 1.5 x 2.5 m Year of construction 1992 Weight approx. 1000 kg The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Pendulum circular saw Irion with roller conveyor Cutting height 100 mm Roller conveyor left 2m Roller conveyor right 3.5 m L x W x H: with roller conveyor 6.0 x 1.2 x 1.5 m Weight approx. 450 kg Year of construction 1965 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Arms Length 2 m 40 pcs. In good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Arms Length 2 m 37 pcs. In good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Hydraulic frame press Hungerbühler Press-Measurement: 4100 x 3050mm 3 vertical cylinders 3 horizontal cylinders Height adjustment via control box Width adjustment via control box Supports at the bottom for gluing wings at working height. The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Wide belt grinding machine Danckaert E 527 - S 81894 Grinding width 1120 mm Combination unit: contact roller / sanding shoe Carpet needs to be replaced Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

The KR QUANTEC series, the best-selling robot series from KUKA, is characterized by being sturdy, powerful, sleek, and flexible . A top performer in its class, the KR 210 R2700 prime industrial robot from the KR QUANTEC prime product family has an ideal payload capacity and a long reach. Frequently used in the following applications: - Palletizing -Depalletizing -Material Handling -Additive Manufacturing -Assembly -Dispensing -Remote TCP. Model: KR210 R2700 prime Condition: Refurbished with 1 year of warranty Year: 2013 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant Not Included: The Base and gripper As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

The most popular robot series from KUKA, the KR QUANTEC, is sturdy, sleek, versatile, and outfitted with high performance features. The KUKA KR 270 R2700 F Ultra robot has a repeatability of 0.06 mm.  Frequently used in the following applications: - Palletizing -Depalletizing -Material Handling -Additive Manufacturing -Assembly -Dispensing -Remote TCP. Model: KRC4 KR270 R2700 F Ultra (Foundry) Condition: Used & Tested Year: 2014 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant Not Included: The Base and gripper As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Brand: KUKA Model: KR200/2 TJ Condition: USED Year: 2000 Rated Payload: 200kg Access Range: 2800mm Contents: Manipulator only Shipping: NOT included in the price Payment: 100% payment before the delivery Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs.

Single roller chain new 1 1/4" x 3/4 RØ 19.05mm approx. 50 m Precision roller chain simplex, standard chain European design according to ISO-R606/DIN 8187 round Chains ISO/DIN: 20B-1 Weight: 3.72 kg Price per meter EUR 8.00 approx. 50 m available Surcharge for custom cutting EUR 20.00 Subject to change, error and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Gear motor Erag AG SKF 0.25 kW 1390 rpm Reduction ratio 1 : 80 Output speed 17 rpm The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Unbalance motor electric motor Voltage 220 / 380 Volt Power 0.185 kW Speed 1400 rpm The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Unbalance motor The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Gear motor Lenze Gear ratio 1:20.044 Power 1.5 kW Engine speed 3450 rpm The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Ultrafiltration Membrane filter device for the clarification of all kinds of fruit juices. manufacturer: Mabex Engineering GmbH type: UF412 dynamic cross-flow filtering. Mabex tubular membranes in bundles A-19. filtering capacity 12,000 l / h electric power 26 kW water supply capacity 80m3 / h compressed air 6 bar The device is complete and functional. Technical Documentation Software We send photos at the customer's request.

KEMWALL ENGINEERING POWDER PRESS Year: 2002 CE Marked: YES Model: KC 21/12 Voltage: 415V Frequency: 50 Hz Serial No: P6-5/4864

Continuous drilling rig Biesse Techno Logic Masch. No 873/90 Position 1: Loader BIESSE-TECHNO LOGIC Item 2: Transfer BIESSE-TECHNO LOGIC Item 3: Transfer BIESSE-TECHNO LOGIC Item 5: Continuous drilling machine BIESSE-TECHNO LOGIC Item 6: BIESSE-TECHNO LOGIC horizontal continuous drilling rig Item 7: Transfer BIESSE-TECHNO LOGIC Item 8: Transfer BIESSE-TECHNO LOGIC Position 9: Brushing machine BIESSE-TECHNO LOGIC Item 10: Unloader BIESSE-TECHNO LOGIC Weight approx. 4 to L x W x H: 6.0 x 2.4 x 2.5 m Year of construction 1990 Dismantling by buyer The plant is in good condition, ready for operation Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

A glass bottle fruit juice hot filling line with bottles cooling tunnel Capacity: 5,000 units (1.0 and 0.75l), built between 1994 and 2014 Box line, equipped with K 1; Dirt box task on transport system, done manually K2; Bottles lid screwdriving system from Fa. Elektro Maschinenbau Rink GmbH, Type: KM 740/7K , Fabr. No 07/1813/93 Year of construction 1993 4 boxes of 6 bottles each are made at the same time the lids autom. unscrewed and put into a Containers disposed of. K3; Kettner bottle unpacking line Comm. No. 93/0604/083, Type: R09 JUN 9, Year of construction 1993 12 tulips per row x 3 are simultaneously lifted out of the box and onto a bottle tasktable with 15 V2A chain belts. K4; Box washing and turning system Enema at the bottom, outlet of the box at the top Manufacturer Fa.. Klotzki Maschinenbau, Type: Reversible wheel washer, year ...

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

Coffee-tech FZ94 Manufactured in 2020, delivered in 2021 In perfect condition. 230V 50/60 Hz Electricity 3 independent heating elements for a total of 3600W Adjustable airflow and drum rotation speed Fast cooling Low electricity consumption Possibilities with Artisan and Cropster softwares : - Roasting curves logging (3 probes) - Airflow and drum rotation speed control - Automatic heating shutdown at the set temperature - Semi-automatic curve replication Shipping possible with extra-cost. Also available for sale: various Coffee-Tech Solar and Avirnaki

Suction blower MTV 6040 D Masch. Item no. 708,438 Motor power 11 kW 1450 rpm ø approx. 700 mm Year of construction 1982 The machine is in good condition, ready for operation Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Gear motor SEW Through hollow shaft 50 mm Motor 1.5 kW Reduction 94.93:1 Output speed 15 rpm In good condition, ready for use Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

42mm W/E HF Tube Mill Make: Won Engineering (Korea) Year New: 2008 Diameter: 10mm – 42.7mm Square Sizes: 12mm x 12mm – 18mm x 18mm Pipe Length: 5m – 8m Line Speed: 120 meters per minute Dual Mandrel Uncoiler Cage Type Accumulator Forming Mill with 100Kw DC Drive 150Kw High Frequency Welder Cooling Section Sizing Mill with 100Kw DC Drive Flying Cut-Off Saw with 7.5Kw Motor Run Out Table Dumping Table Electrics, Hydraulics, Controls, Lots of Tooling

Hot runner control unit - Feller Engineering MCS (2 pcs.) Year of construction: Description: 24 hot zones with cabling Price: On request

Manufacturer: AIDA ENGINEERING LTD. Made in: Japan Presses are never used, condition is like new. Feeders and straighteners are available. Capacity: 80 tons Rated tonnage point: 6,5 mm Stroke: 200 mm Number of strokes per minute: 60-150 Bolster area (left-to-right x front-to-back): 1400 x 500 mm Slide area (left-to-right x front-to-back): 1400 x 500 mm Bolster thickness: 200 mm Distance between slide and bolster: 450 mm Slide adjustment: 50 mm Main motor: 45 kW Required air pressure: 5 kgf/cm² Total weight: 33 tons Roll feed Material width: 70=300 mm Material thickness: 0,25-0,4 mm Feed length: 50-120 mm Feed angle: 300-60 deg Uncoiler Coil diameter: 800-1200 mm

Parker Engineering & Design Vertical Light Stack Module For testing solar modules photovoltaic modules Testing of electrical and mechanical safety Support in product development, design and quality control Detection of any problems that may arise during development Quality and safety control Endurance test bench Temperature Can be driven on castors Entrance trays for forklifts 400 VAC, 3.PH, 50 AMP Ir. 10,000 amp YOC 2012 Weight 1400 kg

CATERPILLAR C280-8 GENERATOR OFFSHORE . Ano: 2011 . Modelo: C280-8 / I-8, 4 tempos-ciclo-Diesel . Velocidade nominal: 900 RPM . Gerador: KATO ENGINEERING INC. . Model: AA28661000 . Potência: 3.142,9 Kwa / 2.200 Kw . 60Hz . 346/600 Volts . 3,024 Ah . 3 Fases . never used With certificate (BV, ABS) available

bottling line AVE - 2005 speed: 2.500 bph for sparkling wine 3.000 bph for still wine. Depalletizer GP ENGINEERING mod. COMPACT 52 Filling monoblock isobaric AVE 24.24.6: Rinser 24 clamps single treatment - fixed nozzle Filler 24 valves with pre-evacuation and self-leveling Corker 6 head natural straight cork and mushroom cork. Caps orientator AVE Bottle washer/dryer CAMES mod. W DT 3/8 Capsuling machine ROBINO & GALANDRINO mod. FENIX 2 suitable for pvc and polylaminate capsules Labeller AVE adhesive and cold glue mod. 12T 4S 4E suitable to apply: Front label and back label (adhesive and cold glue). Packing monoblock GP ENGINEERING mod. ISOLA 700: Box forming machine - american box Case packer single head with adjustable head Hives inserter AVE Box closing machine above and below hot glue AVE Palletizer GP ENGINEERING mod. PABR 50 Wrap pallets semiautomatic AVE Le ...

Available in stock 3 x NEVER USED Capstone Pressure Transducers. 1 x Omega Engineering model PX309-100GV + 2 x Omega Engineering model PX319-100GV Most commonly used for Microturbines C30. The equipment was NEVER USED and is sold inside the original packaging. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø300 mm Table dimensions: 170 x 420 mm Grinding table inclination: 0° – 45° top + bottom Motor power: 0.75 kW Motor speed: 1,500 min-1 Clockwise and counterclockwise rotation Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø60 mm Weight: 27 kg Optional: - Angle stop - Cylindrical grinding device - mobile machine stand Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If you have any questions, please  ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø400 mm Table dimensions: 225 x 550 mm Grinding table inclination: 0° – 45° top + bottom Motor power: 1.5 kW Motor speed: 1,500 min-1 Clockwise and counterclockwise rotation Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø80 mm with angle and parallel fence Weight: 55 kg Optional: - Angle stop - Cylindrical grinding device - mobile machine stand Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If y ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø600 mm Table dimensions: 320 x 830 mm Grinding wheel inclination: +/- 30° Motor power: 1.5 kW Speed: 940 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø100 mm Oyrkh with angle stop with engine brake Weight: 240 kg Optional: - digital angle display - Machine light - Table extension: 170 mm Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not h ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø900 mm Table dimensions: 450 x 1,200 mm Table extension: 300 mm Grinding wheel inclination: +/- 30° Motor power: 4.0 kW Speed: 600 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø150 mm with angle stop with engine brake Weight: 460 kg Optional: - digital angle display - Machine light - Table extension: 170 mm Price plus VAT, which will be shown separately on the invoice. If you have any questi ...

capacity: Ø 10 - 75 mm sawing motor: 11 kW hydraulic motor: 3 kW Saw Feeding Servo: 1,5 KW Siemens Material Feeding Motor: 1,5 KW Siemens Saw speed: 70-160 rpm /min saw-blade dia.: Ø285 x 2,0 x 1,7 x 32 mm cutting range min.: 1000 mm cutting range max.: 7000 mm control: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 2950x6800 m weight of the machine ca.: 3500 kg GERD WOLFF GLS-75 #High-performance circular saw From 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nipping press - pneumatic Make Probook Engineering Model Nipper Year 2005 Working width 350 mm Available direct

Single stand - eccentric press KRUPP type PEKRD 125 h Masch. No. 2861 Year of construction 1977 Compressive force 125 ton. Projection 400 mm Table size 950 x 750 mm Ram surface 800 x 540 mm Table opening 100 x 250 mm Stroke adjustment 8 to 160 mm Ram adjustment 100 mm Installation height largest stroke top max. 550 mm Number of strokes 60 strokes/min. Table height above corridor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in the tappet - Compressed air Clutch-brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram position - Table top with ball rollers - Two-hand operation - Grease central lubrication HELIOS- Stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm Weight approx. 10 tons. good condition (very little used); used

Single Stand - Eccentric Press PELS - RICHTER Type PEKR 125 Masch. No. 20684 Year of construction 1967 Compressive force 125 ton. Projection 430 mm Table size 1100 x 750 mm Ram surface 890 x 650 mm Table opening 400 mm Stroke adjustment 6 to 115 mm Ram adjustment 100 mm Installation height largest stroke above max. 450 mm Clamping pin bore 50 mm Stroke rate 60 strokes/min. Table height above corridor 900 mm Motor power 7.5 kW Mains connection 380 volts, 50 Hz - Overload protection by crushing plate in the plunger - Compressed air Clutch-brake combination DESCH- Plunge weight compensation cylinder - Manual ram position - Two-hand operation - Cam switchgear - Grease central lubrication Vögele - Stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm Weight approx. 10 ton. good condition; used

Four-way planer Weinig Unimat U 23 (Ref. No. 231-2615) with 7 waves Planer width 130 mm Planing height 140 mm Masch. Item no. 023-161 Year of construction 1991 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12