pek engineering used for sale

For the loading or unloading of drums from trucks and containers, for the discharge palletizing or converting barrels in a shop or a factory site. Technical specification -SWL: 750 kg - introduction of the fork:-weight: 80 kg

Material test bench / final inspection consisting of the following main components Keyence XG-H500M Digital 5 Million Pixel P/W Camera CCD: 2/3-inch monochrome CCD, squareElement all pixels 11 times read speed, 5,050,000 pixels Scan Method: Progressive (61.2 ms), Interlace (40.3 ms)Interlace is a binning process that sums up the odd rows and even lines. Model CA-DC21E Lighting Controller Type lighting controller For XG/CV-5000/CV-X200/CV-X100 series only Input: Forced shutdown of the lighting: Input voltage max. 26.4 V, min. 2 mA Edition Light control method (1) Constant voltage regulation method (DC lighting) (2) Pulse width modulation method (emission frequency: 100 kHz) [Change of ECU setting] Brightness levels 255 levels digital [Change of ECU setting] Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC ...

for format 132 cm

PRE-ALPINE REGENERATION LINE COMPLETELY REVISED, ELECTRICAL WIRING, VENTILATORS, PULPIT. EQUAL TO THE NEW! MATERIAL: PE PP PC PS ABS HOPPER WITH DOSING UNIT EXTRUDER WITH DIAM SCREW. 105 MM. 35 L/D AVERAGE PRODUCTION 300/450 KG/H BASED ON MATERIALS ENGINE: 117 KW OIL PUMP VACUUM DEGASSING PUMP centrifuge Cabinet

Insulated tank-mixer with a capacity of 25,000 liters. Mixer for thick mass

Ultrafiltration Membrane filter device for the clarification of all kinds of fruit juices. manufacturer: Mabex Engineering GmbH type: UF412 dynamic cross-flow filtering. Mabex tubular membranes in bundles A-19. filtering capacity 12,000 l / h electric power 26 kW water supply capacity 80m3 / h compressed air 6 bar The device is complete and functional. Technical Documentation Software We send photos at the customer's request.

325,000 Litre Stainless Steel Storage Tanks with Insulation Excellent condition SBS will carry out complete turnkey project from dismantle to chartering of ship. Please note these tanks must be transported by ship and therefor your site must be near to the port.

Hot runner controller - Feller Engineering MCS (2 pcs.) Year of construction: Description: 24 hot zones with cabling All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Lid placing machine, make Laue Engineering, year 2018, used for tin cans with a diameter of 127 mm (dried milk), Slip lid with integrated spoon (10 ml), Consisting of:, can conveyor, for the supply of the cans, feed generation in front of the separation station and transfer of the finished article (can with lid)., execution: Welded frame made of stainless steel with Intralox conveyor belt, drive motor, feed star and goods security, cover conveyor: Feeding of the lids to the lid placer, execution: Welded stainless steel frame with Intralox conveyor belt, drive motor and article surveillance, lid setter: Separation, positioning and joining of cans and lids, return of finished part to can conveyor, execution: Welded frame made of stainless steel with carousel (8 stations), drive motor and goods security and complete cladding; switch cabinet, Destacker: Lid magazine and lid feeding on lid co ...

Able Engineering 500L Tank Chocolate Tank 2015, Stainless, 500L capacity, jacketed mixing tank, Top mounted agitator, central bottom discharge into jacketed Rotan Pump all mounted on skid with load cells, 3Ph

General SKU305U615 MakeSTC Engineering GmbH TypeReaktor 6500LTR LocationBarneveld CEcheck Pressure Working pressure0.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume6500 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6500 Ltr. Vessel sizesDia. 2000x2534 mm Dished bottomcheck Dished top sidecheck ManholeDia. 450 mm Top connectionsDN200, DN100, DN50(4x) OutletDN80 Half coil jacketed45,5Ltr Max. temperature-20/160°C With paddle stirrercheck EKATO, Type: HWL2080 Motor7,5kW, 380-420/655-725Volt, 1440rpm (EX) Speed mixing shaft46rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Information No.6004 Year of construction2005 Floorspace2,3x2,3 m Total height3,7 m Weight2100 kg ATEX compatiblecheckStainless Steel ReactorsSTC E ...

Alan Ruddock Grain Elevator Malt Intake Hopper - approx. 100kg capacity Inclusive of a manually operated slide Non-standard finish (metallic bronze 56) Grist Elevator - 2.5 m o/a height. As shown in drawing. Inclusive of polypropylene buckets, stretch resistant belting, and a three-phase geared motor. This is a SECOND HAND item and is sold as seen. For more information and more available stock please visit us at - advancedbrewing.co.uk

enlargement: 10-100x diameter: 200 x 150 mm weight of the machine ca.: 0.15 t dimensions of the machine ca.: 0.4 x 0.5 x 0.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1500L Mixing Vessel with Mixer Vertical stainless steel tank 1500L Gross Volume Manufacture: Unitstaal A/S Denmark Year of Manufacture: 2000 Diameter Approx 1350mm Height Approx 2300mm (Including Motor) Bottom Outlet DIN Butterfly Valve Top Manway Double Walled with Insulation Pressure Gauge on Top Sight Level Sight Tube Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

11800L Square Vessel - Atmospheric Vertical stainless steel tank 11800L Gross Volume Manufacture: STB Engineering / 2014 Height Approx 2700mm Width Approx 2550mm Depth Approx 2550mm Insulated Stainless Steel Clad sides Cooling Jackets 1.5" RJT Pipework & Fittings Large Top Access Door Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

General SKU223S097 MakeK.F. Alliance Eng. Limited (UK) LocationBarneveld CEcheck TypeSH Main Features MaterialStainless steel Length2300 mm Width400 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder width400mm Feeder length2300mm Feeder height130mm Closedcheck Inletdia. 240mm (3x) dia. 200mm (1x) Outletdia. 240mm With motor1.5 kW 230/400 Volt Information No.8868 Year of construction2002 Mounted on framecheck Floorspace3,1x0,8 M Total height1,8 M Weight1200 KgVibro feedersKF Alliance Engineering Ltd.Conveying systems > Vibro feedersBrand > KF Alliance Engineering Ltd. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Ba ...

80 litre stainless steel tank NEP cleaning ball 5 tappings 1 tapping of 22 mm 1 tapping of ca 38 mm 1 tapping of ca 44 mm 1 tapping of 72 mm 1 tapping of 72 mm, Volume: 80 liters , Cover diameter: 400 mm, Tank bottom outlet: Yes, Tank bottom diameter: 35 mm, Event: 1, Mobile tank: Yes, Weight (kg): 85 , Calculation temperature (°C): 143, Design pressure : -1 / 3.3 bar , Pressures test: 5.3 bar , Operating pressure: -1/3 bar , Porthole: 1, Maximum allowable pressure: 3.3 bar

Double-walled stainless steel tank Manufacturer GOAVEC Capacity 105 liters CIP ball, Volume: 105 liters , Hustle: Tank bottom, Elec: 400V, Engine: DR drives type TS71A4, Engine power: 0,25 kW, Cover diameter: 500 mm, Tank bottom outlet: Yes, Tank bottom diameter: 22, Event: 1, Mobile tank: No , Double envelope: Yes, Double envelope volume: 8 liters , Design pressure (double jacket) : 2.2 bar , Maximum admissible temperature (double envelope): 95°C , Proof pressure (double jacket): 3.5 bar , Operating pressure (double jacket) : 2 bars , Double envelope fluid: Water , Operating pressure: -1/3 bar, Pressure calculation: -1 / 3.3 bar, Operating temperature: 0 / 143°C , Calculation temperature: 143°C , Pressures test: 5.3 bar, Top nozzle: 1, Side tapping: 1, Porthole: 1

Our state-of-the-art Automatic Tube Filling Machine is a versatile all-rounder and has been developed to optimally support companies with the highest quality standards. Thanks to its high-quality workmanship and wide range of applications, it offers intuitive operation that optimizes your tube filling processes efficiently and reliably. The powerful drives and the user-friendly color touchscreen control system allow maximum flexibility for format and product changeovers and greatly simplify your tube filling. The machine has memory locations for quick and reproducible setting of all relevant machine parameters. If you would like to optimize your tube filling processes through a strong production output with high quality at the same time, we at Impuls Packaging are your ideal partner. Overview of the overall system Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 ...

3-Stage In-Line High Shear Mixer 18,5 kw, max 3000 rpm, inlet DN80 / outlet DN65, three stage multishare in-line mixer, with Eagle Burgmann Thermosiphon TS2000

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

Gough Engineering GV1 Vibratory sieve Stainless, 450mm mesh diameter, mobile, 3Ph

Input : 30AC 380-480V+10%/-10% 47-63Hz 8.0A Motor : 1.5kW 2HP Brand : Siemens For any inquiries, please contact: 1. email: warisaratopglove.co.th and supaluktopglove.co.th 2. Contact Number: i. Ms.Warisara S. F7andF8A: +661 2911580

AVIAN Engineering Grinder G46/ 60, refurbished 2003 Consisting of :- Driven Infeed Pinch Rollers Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs Through-Put 300 KG/H Cutting Chamber 620 x 460 mm Hopper Opening 620 x 500 mm, With Blower Good Production Condition. EXW our Warehouse Enger, Germany

USED GEAR MANUFACTURED BY JOHN BROWN ENGINEERING .MADE IN USA TOTAL 17 UNITS

Used 6-stage evaporation station made by B&P Engineering. New 2006. In addition, concentrate cooling station by Ciat. New 2005. Capacity 24.000 liters/hour.

Heavy duty distribution pannels in very good shape,turbine control pannnels etc.

A continuous cabinet press Pritelli is available. Press length: approx. 2500mm, press height: approx. 1300mm, press depth: approx. 680mm, pressure shoes vertical horizontal: 2/3, rated power: 7kW. Machine dimensions X/Y/Z: approx. 7000mm/2400mm/2950mm, weight: approx. 2800kg. An on-site inspection is possible.

I am pleased to offer the following Grinder:-, Used Avian Engineering Model G46/ 86 Grinder, Main Motor 30 kW, Blower Motor 4 kW, Rotor Blades 6pcs, Stator Blades 4pcs, Rated Through-put +500 KG/ H, Cutting Chamber 460 x 850 mm, Hopper Opening 850 x 500 mm, Film infeed width: 800 mm, CUTTING CHAMBER, The cutting chambers are made entirely of high quality steel. CNC machined and ground before assembly. Long life is ensured by the use of heavy wall sections and high grade material that will not contaminate the material being ground. The design allows for easy disassembly, repair and maintenance., ROTOR, The rotors are manufactured from high tensile steel and are balanced for stable running. The rotors are manufactured with scissor cut action. The Rotor design allows for easy removal and set-up of the blades and gives a consistent particle size. Transmission system: Belt and pulley driven,  ...

Spares in stock for frame 5 turbines

Rhino Engineering pre-soaking machine for crates, year of construction: 2025, capacity: 2000 crates per hour, dimensions: 7500 mm x 1200 mm x 1750 mm. The machine is designed to pre-soak meat crates using hot water, soap and air bubbles before they enter a proper crate washer. To this end, the machine is equipped with heating plates (to be connected to a central heating system), a blower and an inlet for chemicals.

Voltage: 380V, frequency: 50Hz, 3 phases, equipment: rotary indexing table, filling station with powder hopper, pressing station with hydraulic pressing unit, conveyor belt, control panel with Run/Ram/Index functions, main switch, HMI/display PP-006, Mitsubishi PLC FX2N-32MR, expansion module FX2N-4DA, Mitsubishi operator panel F940GOT-SWD-E, hydraulic power unit with electric motor, pneumatic and hydraulic lines, safety enclosure, emergency stop, 400V/CEE connection and CE marking. An on-site inspection is possible.

ball valve, ball valve internal thread, metal ball valve -Manufacturer: Pekos, 2/2-way metal ball valve stainless steel unused -Type: K806 SGSGV -Size: 1 -Number: 4x ball valve available -Price: per piece -Dimensions: 235/80/H140 mm -Weight: 3.2 kg/piece

pressure: 125 t throat: 400 mm stroke: 6-125 mm ram - range of adjustment: 100 mm dayligth: 400 mm table surface area: 1100x750 mm no. of strokes: 60 Hub/min ram surface: 800x550 mm hole in the table: Ø 150 mm total power requirement: 14 kW weight of the machine ca.: 9,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8115 Type: PEKR 400 Producer: Richter Created: 1961 Parameters: Compressive force: 400 t Stroke length: 10-220 mm Maximum stroke rate per minute: 30 1/min Adjusting the ram: 160 mm Motor power: 30 kW Max. sheet thickness: 26 mm One hole in the table: 400/255 mm Machine height: 3750 mm Machine length: 2400 mm Machine width: 3250 mm Machine weight: 42000 kg

pressure: 150 t Table dimensions: 1000 x 360 mm voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Inclineable mechanical press with updated electrics (CE2004) and bolster plates. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8499 Type: PEKRS 160 Producer: IWK Created: 1970 Parameters: Table length: 2000 mm Table width: 1000 mm Maximum stroke rate per minute: 55 1/min Stroke: 8-180 mm Adjusting the ram: 110 mm

Single column - eccentric press KRUPP type PEKRD 125 hMasch. No. 2861 Year of construction 1977Compressive force 125 ton. Projection 400 mmTable size 950 x 750 mmPlunger area 800 x 540 mmTable opening 100 x 250 mmStroke adjustment 8 to 160 mmPlunger adjustment 100 mmInstallation height largest stroke at the top max. 550 mmStroke rate 60 strokes/min. Table height above floor 800 mmEngine power 10 kWNetz connection 380 Volt, 50 Hz- Hydraulic overload in the plunger- Compressed air clutch-brake combination ORTLINGHAUS-

Single column - eccentric press PELS - RICHTER type PEKR 125Masch. No. 20684 Year of construction 1967Compressive force 125 ton. Projection 430 mmTable size 1100 x 750 mmPlunger area 890 x 650 mmTable opening 400 mmStroke adjustment 6 to 115 mmRam adjustment 100 mmInstallation height largest stroke top max. 450 mmClamping pin bore 50 mmStroke rate 60 strokes/min. Table height above floor 900 mmMotor power 7.5 kWNerg connection 380 volts, 50 Hz- overload protection by crushing plate in the plunger- compressed air

Powder machine Fabikat PEKU with 1000 mm passage width for powdering top and bottom for Plates, profiles, hoses, etc.

Key data: 450

The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera » Pit ...

Pek-Mont tumbler, inside dimensions: Ø 940 mm x 1060 mm, total dimensions 1360 mm x 2400 mm x 1860 mm.

pressure:400 t throat:520 mm stroke:20 - 200 mm no. of strokes:30 /min distance table/ram, max. stroke up, adjustment up:680 mm table surface area:1600 x 1000 mm table height over floor:715 mm passage to the back:1000 mm ram surface:1300 x 800 mm ram adjustment:130 mm power requirement:38,0 kW weight:41,0 t dimensions (WxDxH):2,1 x 2,6 x 4,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatic, Ortlinghaus overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic

Stock number: R351, Pectin agitator, stainless steel,, 18,5 kW motor, 2900 rpm, 380/420 V., Flange mounting in the top., D 240 mm head., Material: Stainless steel AISI 304, Head: D 240 mm.

14.500 litre, Stock number: T3371, Tank, stainless steel,, closed top, standing on legs., Double jacket., Insulated, outer fully welded stainless cladding,, conical top and bottom., Tank cover in the top,, washing balls in the top., Agitator from the top with bottom guide,, Ø 2850 mm., Litre: 14.500, Material: Stainless steel AISI 304

Selling an inventory of a mechanical engineering company. various lathes, milling machines, rolling machines, saws, etc. Pictures on request. The machines are only sold as a package! Not individually